If i take a photograph on my iPhone 5 and want to place it in a different folder on my iPhone, how do i do it? i also have a macbook air
if i take a photograph on my iPhone 5 and want to place it in a different folder on my iPhone, how do i do it? i also have a macbook air
You should be able to add photos to an existing album it like this:
While viewing thumbnails in the "Photos" view, tap "Select", select the photos, tap Add To, then select the album.
See: Organize your photos and videos
Similar Messages
-
What is a hard boot and will it fix my grainy photos when I take flash photographs with my iPhone 5 in the deep dark?
Someone said a hard boot fixed the problem above .....when I go outside in the dark and take a flash photograph the photograph is all grainy and dark something is wrong is a hard boot where you hold the power and the home button down the same time is that safe will it fix the problem is it a hardware or software issue please help i've had my phone for over year people at the Apple store and other people told me it will be fixed in a software update but now it's getting serious I hope they'll replace my phone if it's a hardware issue something is wrong and I am angry please help if you canThe hard boot that I'm referring to in my case is relating to the iPhone not a Mac… five Years ago with my first iPhone three GS I believe it was someone at the Apple store told me have you tried a hard boot hard boot with my iPhone is where you hold the power button and the home button down at the same time for like 10 seconds or whatever and it shuts the phone off or reboots the phone
let's say you have the phone on and you do that procedure that's what they referred to as a hard boot when it comes to the iPhone and I wanted to know if it was safe for the iPhone five to do a hard boot I did it with my 3GS with no problems
I'm just trying to be able to take a photograph of something in the deep dark from 10 to 15 feet away and have it not look grainy and dark some have said and other discussions that it was a hardware problem and they have their phones replaced other said it was a software problem but you're saying and everyone else saying it's just because the flash and the sensor is too small -
When I plug my iPhone into my computer to sync my iTunes I get a message that says "iTunes cannot read the content of the iPhone" and wants me to restore my phone back to factory settings. Any suggestions so that I don't have to restore? I have all of my stuff backed up on iCloud but I really don't want to go through the hassle of wiping it clean and putting everything back on.
This is a post from a user named edgar999 and it worked PERFECTLY:
"OK - this is how it works:
In order to backup from iCloud you cannot use iTunes!
Therefore disconnect your device from your computer.
Turn on your device and go to Settings and then go to General.
At the bottom of this submenu there is a buttom "Reset"
If you push that buttom you see 6 different Erase settings to chose from!
Chose "Erase All Content and Settings" because this will wipe everything from your device and will let you restore from iCloud! (I tried the top "Reset All Settings" but that did not let me use iClouds afterwards!)
Once you pushed that buttom your device will be wiped clean and after some time you will see the Device Welcome Screen like on a new device!
After choosing your location you will be asked to setup your WiFi-conection. After you joint to your Wifi you will be given the choice to restore the iPad from a backup from the iCloud. Choosing this backup will prompt you with your apple ID and password.
Restoring from a backup can take some time. The process uses your Wi-Fi connection to download settings, content and data. If you had a lot of content on your device, this can take a while. The restore screen should give you estimates at each stage of the restore process, starting with restoring the settings and then booting into the iPad. When the iPad home screen appears, the device will continue the restore process by downloading all of your applications.
If you are restoring from a backup because you have run into problems with your device that can only be solved by restoring it, you can first choose your latest backup. If you still have problems, you can move on to the next latest backup, repeating the process until (hopefully) the problem is cleared."
THANK YOU edgar999!!!! -
Hi
I have a Macbook air & iPhone 4.
what do I need to do if I want to buy a book (ebook) or an application that is not available in the iTunes store in my area i.e. Africa (Egypt)?
Do I need to open a different account in the iTunes store in the other area i.e. USA ?
Please advice
Thank youYou can only buy content from your own country's store i.e. the Egyptian store if you are in Egypt - you need to be in a country to use its store, so to use the US store you will need to be in the US and have a US billing address on your account. If there is an app or any other item that you would like to be buy that isn't currently available in the Egyptian store then you can try requesting that it be added, but unless the app's developer or rights-holder agrees to it then Apple won't be able to sell it there : http://www.apple.com/feedback/itunes.html
-
Who can shed some light on my ongoing connection problem.
After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet.
I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to the net and function well.
So I cleaned up the ipad completely, installed the latest firmware and reinstalled my apps : no connection.
I tried all things of resets and forgets. No result.
I have been fondling with my Airport Extreme 5 , but that did not help much.
This morning I went to a neighbor , hooked my ipad air on his network, typed the password and the thing all worked fine.
I have tried to connect the ipad air as an ethernet client, but that did not work. „Not enough power“ was the statement
Ideas anyone ?Yes I tried this manyfold. But did not work. Reading on, I took Tesserac's advice. Shut down router and computer.
Start router after 15 minutes and wait another 10 minutes before starting the computer.
Et voila.... everything is back in working order,
Regards form Curacao, Dutch Caribean.
Pete van Linden -
I have an icloud account and can access my numbers documents on my mac at home and iphone by clicking on the numbers icon and these saved documents appear
I now have a macbook air on which I have icloud but when I click the numbers icon I can't find my saved documents
Any ideas ?Hello mikebundy,
Let's double check to make sure everything is setup correctly, please see the following resource:
iCloud: Use Documents in the Cloud with OS X v10.8
http://support.apple.com/kb/PH12514
To use Documents in the Cloud with your Mac apps, Documents & Data must be turned on in iCloud preferences.
Turn on Documents in the Cloud
- Choose Apple menu > System Preferences, then click iCloud.
- If you are not already signed in, sign in with the Apple ID you use with iCloud.
- Turn on Documents & Data.
Thanks,
Matt M. -
How do I remove pictures in the photo library on my iphone 5? I need the space to download iOS 7.0.2. I have a MacBook Air and have transferred pictures from my iphone to iphoto.
Photos in the ?Camera Roll can be deleted by tapping on Select, then selecting the photos to be deleted and finally tapping on Trash.
Photos in albums that were copied to the device by syncing with your computer running iTunes are deleted by syncing again. But before clicking on Apply or Sync deselect the no long wanted albums in iTunes. Finally click on Apply. -
i updated to mountain lion, i have a macbook air and now when i shut it down, it takes incredibly longer than before to get off! why??
The honeymoon is over?
-
ran out of room...how do i get the cd book onto my new macbook air? downloaded to old macbook from cd. goes on list when sync iphone with old mac. gets erased when sync with new macbook air
thanksCopy it from the old computer to the new one.
-
I have a MacBook Air with OS X and am having trouble accessing the ADT Pulse Home Security System cameras. The mobile (iPhone and iPad) apps allow access no problem, but I can't get a picture on the MacBook. Have tried Safari and Firefox browsers. Anyone have any ideas? Thanks.
From a Catherine to Katherine -- Had the exact same problem!! I had to enable Java twice - both in Safari and then on the MacBookAir itself.
-
I purchased pages and numbers for Ipad and Iphone, now I have a MacBook Air and I would like to use both softwares in my computer. Do I need to purchase them again ?
Yes. Air runs OS X, iPad and iPhone run iOS - different operating systems
that required different versions of Pages, Numbers, & Keynote to run. Like
the iOS version, once you purchase the version for your Air, you may install
it on as many OS X desktops/laptops that you own. -
My iphone 5s is not recognized by itunes on my new Macbook Air.
I just bought a Macbook Air. I previously owned a Macbook Pro. I am attempting to transfer all of my photos and music to my new Air. Photos were no problem, music was a breeze using Home Sharing. However, my iphone 5s is not recognized by itunes on my new Air. Any suggestions?
Hello crystal251,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Have a nice day,
Mario -
My iPhone won't show up in iTunes on my new Macbook Air. What am I doing incorrectly?
Hi everyone,
So I am setting up my new MacBook Air (purchased on Black Friday), so it's new. And everything is going well, I'm signed in to my iTunes account, I have downloaded all my purchases from iCloud and I have authorized the Air. HOWEVER, when I plug-in my iPhone 5S to my Air, the photos import, but nothing else. It doesn't show up in iTunes as one of the "devices." So it syncs the photos, but nothing in iTunes.
Did I miss something? What am I doing wrong here?
Thanks,
LizHi Liz,
Thanks for using Apple Support Communities. This article has steps to try if your Mac isn't recognizing your iPhone 5s:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
If that does not help you may also want to try a quick reset of SMC to see if that helps:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Cheers,
- Ari -
Greetings this evening, I just purchased an iphone 5s and want to transfer some of my itunes from my mac running 10.6.7 to my new iphone 5s.I downloaded version 11.1 from the itunes website,restarted my computer but it wont recoginize the new 11.1 version which it tells me I need to sync songs from mac to 5S.Even though I downloaded version11.1 it still says I'm running version 10? How can I get my itunes from my mac onto my new phone and have them in itunes on the phone? Love my music! Thank You !
You have to update to 10.6.8 first.
Then, if your machine qualifies, this explains how to get Mavericks:
http://www.apple.com/osx/
This explains whether your machine is capable of Mavericks installation:
http://support.apple.com/kb/HT5842 -
Please help! How can I delete a file without deleting all my photos? I have just managed to delete all my more than 2000 photographs by choosing' Select all' and then delete. But I thought only 'all' the photographs in the file I had open would be selected! I have got them back, but I've also got back more than 800 others that I'd deleted SINGLY over the last 6 months! HELP!
Put a Photo in the iPhoto Trash.
iPhoto Menu -> Empty Trash
This removes the photo from iPhoto and the Hard Disk (in every version of iPhoto except iPhoto11)
In iPhoto 11 the file goes to the System Trash, you need to empty that too.
Regards
TD
Maybe you are looking for
-
I have Adobe Photoshop elements 3.0 I am having installation problems, I am running Windows 7
I am unable to install Photoshop elements 3.0, I am running Windows 7. The error is that this program in incompatable with Windows 7. Is there a fix or download for this?
-
Hi, I need to change the inbound delivery by packing(VL32N) it with the handling unit and save the delivery . will the ws_delivery_update work in this scenario?if yes, pls advice the relevant parameters that needs to be passed as its not updating the
-
Does the Pixma Pro 100 auto stop when insufficient ink is available to print properly or is the 'low ink' warning all you get until the it doesn't print correctly?
-
Problem with a compiled program
Hello, I have a problem with a compiled program on labview 6i. This program used a serial port (COM1 or COM2). During the launching of the ".exe ", a fatal error occurs. Here this error: => APPLICATION caused an invalid page fault in => module LVRT.D
-
my computer logs me off a few seconds after i log on. How do i fix it?