If iPhone 5 peel off when I unboxing in the retail store in canada, what can I do? Can I change a new one?

If iPhone 5 peel off when I unboxing in the retail store in canada, what can I do? Can I change a new one?

The anodizing delamination issue is over blown .
If you are unboxing and activating in a Roberts/Fido/Virgin/Bell or Telus store and you see existing damage certainly YOU reject it.
The areas that appear to be subject to minor delamination are the milled edges.
This milled edge may be vulnerable to delamination since anodizing is dye process set within the top few micron of the base metal with an electric charge.
If you want an unlocked iPhone5 get it from Apple Retail at full retail price, as the carrier subsidized phones ”may” be Carrier/sim card locked for revenue protection reasons.
You need to check this locally as i can not vouch for Canadian cell phone practise.

Similar Messages

  • IPhone 5 peel off when I unboxing

    If iPhone 5 peel off when I unboxing in the retail store in canada, what can I do? Can I change a new one?

    We're just users here.  Ask the retail store.

  • HT1386 my iphone is switched off when i started updating the new version of iphone. what is the solution???

    my iphone is switched off when i started updating the new version of iphone. what is the solution???

    Turn it on.
    If it will not power on, try a reset by pressing and holding the home and power buttons until the white Apple logo appears.

  • HT4623 I have photos on my iphone 4 which i uploaded from my computer and now i cannot delete them. when i select them the delete icon becomes inactive. what can i do to delete these photos?

    I have photos on my iphone 4 which i uploaded onto my photo stream from my computer and now i cannot delete them from the phone and I cannot see them when I open the device via the computer. when i select them the delete icon becomes inactive. what can i do to delete these photos?

    Hello Tings24,
    We've an article that provides the steps necessary to delete photos from your Photo Stream.
    iCloud: How to delete photos from My Photo Stream
    http://support.apple.com/kb/HT5125
    Cheers,
    Allen

  • HT201272 i can't see my purchased apps in itunes on new ipad when I go into the itunes store. It shows nothing. I haven't changed my ID or country of purchase. It shows that I would have to rebuy them when I go into the store.

    i can't see my purchased apps in itunes on new ipad mini. when I go into the itunes store. It shows nothing. I haven't changed my ID or country of purchase. It shows that I would have to rebuy them when I go into the store. Is there something in settings on Itunes I need to change? I do not have cloud.

    Yes I am looking in the app store. When I look in Itunes on my computer and look at purchased apps it is there. And when I go on my other device and look at apps purchased all apps are there.
    The new ipad doesn't show any apps purchased when I click on apps purchased and when I search the app store it doesn't show it is purchased. I am wondering if I am just missing something...need to turn something on in options or something. Never had this problem with previous ipad when I set it up.

  • I got my iphone5 september last year, i always feel the body of iphone was hot, can i change a new one?

    I got my iphone5 september last year, i always feel the body of iphone was hot, can i change a new one? If i can, can i change the colour? my phone aften slow, this is also a big problem.

    Youngzhang wrote:
    I got my iphone5 september last year
    Then contact Apple or your wirless provider for warranty support.

  • LR CC has just been installed but when I click on the desktop icon nothing happens, what can I try?

    LR CC has just been installed but when I click on the desktop icon nothing happens, what can I try?

    Probably is
    You need a minimum of 10GB of free space for normal operations
    You need to address that first - the best soution may be to get an external drive formatted Mac OS extended (journaled) and drag your iPhoto library to it - depress the option key and launch iPhoto and point to that library
    Hopefully that will let you get started - there may be additional repairs needed
    LN

  • The screen color just went off when I connect WD thunderbolt and Viewsonic Screen.  What can I do?

    I bought Macbook Air with WD Thunderbolt and Viewsonic screen.  If I connect the screen to Macbook Air, it works.  I connect Hard Drive first and screen connnect to Hard Drive.  The color just went off.  I have try on RGB and DVI.  It has same result.  What can I do?  Bugs?

    It might be best to ask only one question in each post otherwise you may never be able to mark them as solved.
    I went to Starbucks this morning and my Wi-Fi on my Verizon Iphone connected, what does this allow me to do?
    It should allow you to access the internet, read mail, etc.
    My Wi-Fi does not recognize my home network from which I connect wirelessly to my MacBookPro and to my Apple TV using Airport Extreme router, why?
    Try restarting your router (remove power for 30 seconds and restart). It may not be properly assigning an IP address to your iPhone.

  • I changed my apple id and now I can't update my apps or download new ones.  I've changed the ID in my iphone settings, but when I go in the apps store my old ID shows up.  If I change my settings back to the old ID my password doesn't work.  HELP!

    So I changed my Apple ID.  Now on my Iphone I can't update things from the apps store or download new stuff.  I went into settings and changed my ID there, but in the apps store it still shows up as my old ID.  The apps store won't let me log on with the new one, as my old still shows up, and if I go back into settings and change it back to the old ID the password I had before no longer works.  This ***** Apple.  You just ruined my Iphone!!!  My phone went from being cool to being junk since I am not unable to download or update apps...the coolest part of my phone.  Someone help???  Please tell me how I can enjoy my phone and apps again...

    Thank you for the response, but I ended up temporarily resetting my Apple ID... It was a pain, but it worked in the end.

  • My macbook pro keeps freezing and shutting off when I am browsing the web on Safari.  How can I figure out what is causing this issue?

    For the past few weeks my computer will slow down when I have been on Safari for awhile, then freeze, and then just go black.  I have to press the power button and then it goes to a black screen with the apple logo and a loading bar underneath when it reboots.  I'm not sure what is causing the issue, but on my previous mac it would have an error message if something like this happened that I could submit.  Any suggestions of where to start to solve this issue?
    Thanks!

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the BOOT_TIME log message that corresponds to the last boot time when you had the problem. Now clear the search box to reveal all messages. Select the ones logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
    If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Some private information, such as your name, may appear in the log. Anonymize before posting.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • HT1212 a friend gave me her iphone but could not remember her passcode and the phone is disable.  What can i do to reset the phone

    A friend gave me her old iphone 4 but could not remember the passcode and the phone is disabled.  How can I reset the passcode?

    In HT1212,
    If you have never synced your device with iTunes, or you do not have access to a computer
    If you see one of following alerts, you need to erase the device:
    "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
    "You haven't chosen to have [device] trust this computer"
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    Alternatively, place the device in recovery mode and restore it to erase the device:
    Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen.
    iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

  • Why does my iphone 4 turn off when i remove from the charger?

    I have no signal. The message pops up "restore needed" iphone cannot receive or make calls. It will not connect to my iTunes either! Any help on how to resolve this issue??? Thanks!!!

    Because it detected an external power source. That's normal. It's been that way since the first iPhone.

  • HT1688 my iphone keeps timing out when trying to access the app store

    once I get to the app store, it just keeps saying "loading..." how do I fix this??

    All apps are tied to the Apple ID they are purchased with and is not transferable.
    You should delete them and re-download them with your new Apple ID.

  • HT4623 I have an ipod touch dated back from 09 or 2010. My itunes says that the current update it 1.1 4 i beilive. But what i can not figure out is, when i go to the apt store it says i can upgrade and downlooad to an 4.5 IOS and it lets me but iturns doe

    How do i update my ipod touch

    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    Then...
    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    If an Update Appears Install it... if not... you are up to date for your particular Device...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

  • When printing an email the subject line appears top left, can I change this to my name ?

    Have changed computers & previously my name would appear top left when I printed an email. Work in a large office & all using same printer, so now when I print an email its not so easy to find it.

    Select email
    File > Print Preview
    a window opens showing email to be printed.
    click on 'Page Setup' button
    click on 'Margins & header/footer' tab
    Under 'Headers & Footers'
    click on first drop down - and select 'Custom.. '
    by default it usually says 'Title' which refers to 'Subject'
    A small window opens allowing you to 'Enter your custom header/ footer text'.
    Type in your name and click on OK
    The preview window will refresh so that you can see the changes.

Maybe you are looking for

  • Report with OLE Object Problem (Crystal Report 11)

    Post Author: ibertola CA Forum: General Hi all,I'm a new user, and I've got a problem with OLE object. I would like to have a report that show me ONLY one of many OLE (word document) in Crystal structure.I've created 3 section detail, and in each one

  • No longer invisible files in root directory

    Since upgrading my 12" Powerbook to Leopard I now notice that I am seeing all the system files at the top level of the hard drive. bin cores etc sbin usr var volumes. Even after upgrading to 10.5.2 they are still there. Is there an easy way to make t

  • Graphics issues with MacBook Pro Retina

    I bought my 15" MBPr in July and have been living with these issues since the beginning. Generally the issue happens when scrolling or writing in forms on web pages in Safari. Often times pieces of the web page will stick or ghost. This also sometime

  • Computer running much slower since upgrading to mavericks

    Ever since I downloaded and installed the upgrade to Mavericks, my computer has taken much longer than it used to, to wake form sleep mode.  Is there any way to fix this?

  • How to move a Process Chain from one old node to a new node?

    Hi, i know the method to move a PC from one node to the other! but what if the target node is a new one? how can i create a node in RSPC? Raj