If one node maxed out

I have the following scenario:
          A request comes in through an MDB and takes the following path: (1)MDB ->
          (2)SLSBx -> (3)some local class(es) -> (4)SLSBy. Step (3) is optional. At
          step (4), though, the node reached max on this particular SLSBy. Would the
          request then get routed to another node for the same bean? I thought it
          naturally would but some one suggested otherwise.
          Further, I don't think the fact I'm caching the remote interface should
          change the answer.
          Thanks,
          Bill

We have 11.5.10.2 on unix with two apps tier node1 and node2 with load balancing. Now one of them, node2 is down. What should i do? node1 and node2 all have concurrent manager, form, http. Fix the node that went down!
If your load balancer and PCP is setup correctly, then node1 should handle all the requests until you have node2 up again.
Thanks,
Hussein

Similar Messages

I have I phone 5 and I can't open iCloud after deleting me old one and tried to open a new one it didn't let me because it said it maxed out

I have my phone is I phone5 and I had an account iCloud but I deleted along time ago and I have no idea what was my email address or user name or password , and tried to open a new one on my phone it won't let me because it said it maxed out and u can open iCloud one time, I need to open a new account so I can safe my information,

I've never seen an error discribing "maxed out". Please type in the exact error message you are seeing so I can maybe assist you further.

All-in-one PC volume is too low even when maxed out

When playing web content with sounds like youtube videos, the sound is too low even when the volume in the cotrol panel is already maxed out. what do i do? My desktop is an hp 22 all-in-one touchsmart pc.
Thanks!
Cynch

Hello @Cynch,
I understand that you are having issue with your HP TouchSmart 22 All-In-One Desktop PC where the volume is low when listening to online content. I would be happy to assist you, but first I would encourage you to post your product number for your computer as there are various version of the HP TouchSmart 22. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Hi we setup ISE in our lab. We have 2 PSN registered but one of the node is out of sync after I upgraded form 1.1 to 1.2

Hi we setup ISE in our lab. We have 2 PSN registered but one of the node is out of sync after I upgraded form 1.1 to 1.2

For out of sync issues, which most likely are due to time changes or NTP sync issues, you must correct the system time and perform a manual sync up through the UI.
For certificate expiry issues, you must install a valid certificate and perform a manual sync up through the UI.
For a node that has been down for more than six hours, you must restart the node, check for connectivity issues, and perform a manual sync up through the UI.

Trying out RAC one node on Windows

Hi all,
I have the Grid infrastructure software installed on a 64 bit windows server (standalone - not clustered). Was trying to install an 11g RAC enabled database on said server and it won't install as complains it is not a cluster.
Is it possible to install a RAC enabled Database on a One node grid server that is not clustered to another node?
Any help would be much appreciated as trying to get knowledge with GRID and RAC enabled instances.
Edited by: user13735858 on 10-Feb-2011 06:26

Hi,
Thanks I installed "Real Application Clusters without Oracle Clusterware" for single standalone server - and it installed without issues.Have you installed Oracle RAC without Clusterware?
There is some misunderstanding or you did not install Oracle RAC because Oracle Clusterware is a requirement for using Oracle RAC and it is the only clusterware that you need for most platforms on which Oracle RAC operates.
Although Oracle RAC continues to support select third-party clusterware products on specific platforms, you must also install and use Oracle Clusterware.
Oracle grid infrastructure for a standalone server does not support RAC.
GI Standalone Server is intended to use feature Oracle Restart and Automatic Storage Management (ASM).
The Oracle grid infrastructure for a standalone server is the Oracle software that provides system support for an Oracle database including volume management, file system, and automatic restart capabilities. If you plan to use Oracle Restart or Automatic Storage Management, you must install the grid infrastructure before installing your database.
The grid infrastructure for a standalone server is the software that includes Oracle Restart and Automatic Storage Management. Oracle combined the two infrastructure products into a single set of binaries that is installed as the grid infrastructure home. The grid infrastructure should be installed before installing Oracle Database 11g Release 2.
My question is does the server for one node have to be part of a cluster before you can install a RAC instance, even if you intend the instance to remain as one node RAC?1- You must Install and Configure Oracle Clusterware, even if it is only one node.
2 - Install Oracle Software Database (RAC)
3 - Create your RAC Database.
RAC or RAC One Node must be configured on Oracle Clusterware.
Regards,
Levi Pereira
Edited by: Levi Pereira on Feb 11, 2011 1:15 PM

250gb tm drive - maxes out at 7 backups?

Just curious if these ratios sound right, or if there is a preference I don't have set up correctly. I have time machine set to back up my entire internal hard drive rather than select folders like "my documents." I did this so I could restore the whole system using the leopard disk in the event of a catastrophic failure.
I'm not getting many backups before maxing out my 250gb drive. I have an internal drive with 78 gigs of material. I have had my time machine backup drive plugged in each day this week. The time machine backups currently have one backup from 01/14, one backup from 01/15, and 5 from today 01/17. My 250 gig time machine now only has only 36 gigs free. I understand that time machine makes one complete backup and then incremental backups of any changed files (via virtual links). I guess it's doing this because if I had 7 complete file for file backups it would total about 550 gigs, but there haven't been that many changes to my system between backups... Doesn't seem right. Can I really only expect about 7 backups on a 250gig hard drive? Also, is there any way to specify how often it backs up. If I can only expect 7 backups it would be nice to have it do it every other day, rather than using them all in an afternoon... Something doesn't seem right.
Thanks for any insight.

I've had similar issues. I have a 120GB drive backing up 60GB of my 80GB internal drive. I checked my Console and found this error:
Jan 19 19:26:42 eMac /System/Library/CoreServices/backupd[1774]: Backup requested by automatic scheduler
Jan 19 19:26:42 eMac /System/Library/CoreServices/backupd[1774]: Starting standard backup
Jan 19 19:26:43 eMac /System/Library/CoreServices/backupd[1774]: Backing up to: /Volumes/FireWireDrive/Backups.backupdb
Jan 19 19:26:44 eMac /System/Library/CoreServices/backupd[1774]: Event store UUIDs don't match for volume eMac
Jan 19 19:26:44 eMac /System/Library/CoreServices/backupd[1774]: Node requires deep traversal:/ reason:kFSEDBEventFlagMustScanSubDirs|kFSEDBEventFlagReasonEventDBUntrustable|
Jan 19 19:38:31 eMac /System/Library/CoreServices/backupd[1774]: No pre-backup thinning needed: 7.51 GB requested (including padding), 45.38 GB available
Jan 19 19:38:37 eMac /System/Library/CoreServices/backupd[1774]: Error: (-8088) copying /Applications/iPhoto.app/Contents/Frameworks/DotMacKit.framework/Versions/A/Dot MacKit to /Volumes/FireWireDrive/Backups.backupdb/eMac/2008-01-04-200348.inProgress/00CF5 18D-1629-4880-AA45-17D61F3184BF/eMac/Applications/iPhoto.app/Contents/Frameworks /DotMacKit.framework/Versions/A
Jan 19 19:48:31 eMac /System/Library/CoreServices/backupd[1774]: Copied 52 files (45 KB) from volume eMac.
Jan 19 19:48:32 eMac /System/Library/CoreServices/backupd[1774]: Backup canceled.
Can anyone explain what's happening here? Thank you.

System Maxing Out!

Hey there! I followed up on some performace tips for my mac, but its not enough. I followed pretty much everything in the manual and even doing things from cliff truesdell's book, but its still not quite enough for me. My music requires lots of information processing and MIDI functions, which maxes out my processor in a heartbeat. My questions: are there any other things that I can do to help the music get processed, and I hear something about logic node...what is it?

Logic node is a utility that allows you to connect two macs together so that the Mac running logic can source processing power from the other mac.....
you need the same version of logic node on both macs and connect them via ethernet.
also if you only have one monitor, make sure the slave mac has logic node as a startup item.
after all that, it can sometimes not work too well

How to read the content in one node of XML in Java? Pls help

My dear brothers,
I am a newbie of XML, I have a exercise which is creating a Tree View from XML file. But the trouble is I do not know how to read the content in one node of XML file. I decide to use the algorithm as following:
1. Create a GUI form which gives the ability for user to choose a XML file (ok)
2. Load XML and return the file (ok)
3. Read the file from node to node to create the node in Tree View (?!)
Please help me, and if you are enough kind, please give me an small example to easy understand. Thanks in advance.
Hoang Yen Binh

I hope this one helps you.
     <ABC Type="ProductBased" ProdName="One" Location="India">
          <CEO>Raj</CEO>
          <Finance>Vikram</Finance>
          <HR>Karthik</HR>
          <Technical>Satish</Technical>
     </ABC>
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
import org.w3c.dom.NamedNodeMap;
import org.w3c.dom.Attr;
import org.w3c.dom.NodeList;
import org.w3c.dom.Node;
import org.w3c.dom.DOMException;
import javax.xml.parsers.ParserConfigurationException;
import org.xml.sax.SAXException;
import java.io.File;
import java.io.IOException;
public class XmlReading {
     Document doc;
     Element element;
     public static void main(String[] args) throws Exception{
          XmlReading xr = new XmlReading();
          xr.getXmlParser(args);
     public void getXmlParser(String[] args) {
          DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
               if(args.length != 1) {
                    System.err.println("Argument Required");
          try {
               DocumentBuilder builder = factory.newDocumentBuilder();
               doc = builder.parse(new File(args[0]));
          }catch(ParserConfigurationException e1) {
          }catch(SAXException e2) {
          }catch(IOException e3) {
          getAttributes();
     public void getAttributes() {
          // Retrive the entire Document from the Dom Tree
          element = doc.getDocumentElement();
//          System.out.println(element);
          NamedNodeMap attrs = element.getAttributes();
          // Get number of attributes in the element
     int numAttrs = attrs.getLength();
     // Process each attribute
          for (int i=0; i<numAttrs; i++) {
               Node node = attrs.item(i);
               // Get attribute name and value
               String attrName = node.getNodeName();
               String attrValue = node.getNodeValue();
               System.out.println(attrName + ": " + attrValue);
          String s1 = element.getTagName();
          System.out.println(s1);
          // To get all the elements in a DOM Tree
          NodeList nl1 = element.getElementsByTagName("*");
          int i2 = nl1.getLength();
          System.out.println(i2);
          for(int i=0; i<i2; i++) {
               System.out.println(nl1.item(i) + "\n");
}

Maxing out on RAM

Hey
My old powerbook came with 128, I added 512 to start then exchanged that with a 1gig so it was running on 1.128. No problem at all. Spec said max was 640.
I now have the macbook pro 2.16 C2D 15.4 screen. It came with a removable gig ram and I had a gig from my previous MBP. However - I feel 2gig is not enough. This MBP says it can only do 3gig ram. Recent models can do 4. I'm wondering if anyone has maxed out the ram on a 3gig version and run it on 4.
I'm thinking of pullng out both 1gigs and sticking 2x2gig in it. Just want to make sure it is possible.
Appreciate any help.

Hi,
one benefit of 2x2GB is that you still have the 'pairing' advantage of some small percentage more speed when the memory is accessed.
And secondly, if you decide to get a Santa Rosa MBP in the future you can use this memory for it.
Other than that, you are right, not much use.
Have Fun
Stefan

How do I get my iTunes (both purchased and cd's) into the cloud as I cannot use match my iMac and MacBook are too old to use the right OS and maxed out RAM memory upgrades, but have iPhone 4S and now 64gb iPad and libraries on desktops plus iPod!!

So very excited bought iPad and new speakers today! Want to get all my music sorted as across iMac (G5), MacBook os 10.6 (maxed out ram and memory) and old iPod. Saw Match would be an option but can't use due to old OS so I can get the raw music library files but then what do I do to get all in one place? Any help appreciated.

A good route would be to attach a USB drive to the macbook. You can use the drive to assemble a copy of all of your music from your various devices. iTunes on the macbook can be used to create a new library, located on the USB drive, into which you can import all of your music.
Two major benefits:
1. From here you can run iTunes Match across your entire music collection; and
2. You will have created a full local backup of all of your music on the USB drive.
Once complete you will be able to access the music from any iDevice capable of running iTunes Match, Do remember as you add music it is important to maintain a local backup in order to keep your music safe.

Lync Server 2013 Front End Pool Mediation Service only works on one node

Hello, I'm currently experiencing an interesting issue with a Lync 2013 Front End Pool implementation on a customer, and I don't know if this is by design or am I missing something.
We implemented 3 Enterprise Front End Servers in a Pool with a hardware load balancer and we have them configured also as a mediation Pool.
We have a SIP trunk to an Avaya PBX which was perfectly working before on a Lync 2010 Implementation that we migrated to these new 2013 Front End Pools.
Now the SIP traffic is only working when configured directly to one node of the pool. If we configure it to any other node the calls fail. We also tried configuring the HLB for port 5060 for the pool and pointed the PBX to that IP but the calls also fail.
Searching around I read something about that the PBX has to be Lync certified in order to use DNS load balancing to send SIP traffic to the mediation pool, however, I don't think DNS load balancing will work because the other nodes doesn't connect the calls
from the PBX, only one node appears to be listening for the SIP Trunk.
I also restarted the mediation service on one non-working mediation server node and the event viewer on the working mediation server node showed events that it restarted the service, Not the non-working one, it's like only one server from the pool
is doing as mediation server.
So even if I get a Lync Certified PBX/Media Gateway, the mediation service doesn't appear to be load balanced, or how does it work in order to do that?
Thanks.
Eduardo Rojas

Just a few things about what should be happening. Each front-end server should be listening on the port configured in topology builder for the mediation service. So if that is port 5060, verify that you see that port listening on all front-end servers
by running a netstat -ano. From a local workstation, also make sure you can connect to that port via a telnet IPAddress 5060. As you say, you should be able to send any of the three mediation servers an inbound call.
Outbound calls will round robin out of the enterprise pool. So you shouldn't see all of the calls coming out of a single server.
A few other items I would look into:
- Make sure your ports are right. Ensure that you are matching ports on the Avaya and Lync. It's not a hard requirement but makes life easier to troubleshoot. So if the Avaya is 5060, just make sure TCP/5060 enabled in your mediation pools
and that your gateways/trunks are also set to TCP/5060.
- Look outside the Lync Event Viewer and see if anything strange (.net errors) are being tossed anywhere else during startup of the mediation service. I once had to remove the mediation server installer (Program and Features | Remove) and rebootstrap
the server because something went sideways during an install.
Thanks,
Richard
Richard Brynteson, Lync MVP | http://masteringlync.com | http://lyncvalidator.com

My hard drive is about maxed out, what are my options

I have a MacBook that is about 5 years old. My hard drive is about maxed out. Trying to determine if it is worth trying to get a larger hard drive, whether I just go to a portable hard drive (a bit of a pain since I travel so much) or something else. Don't think I can even upgrade to Mountain Lion because of lack of hard drive space. I love my Mac, but am looking at possibly going to an iPad for travel as the Mac is heavy and I have to carry two computers (work and personal). Considered buying a new Mac, say an Air, but don't have that kind of cash to drop for it.
Would appreciate any opinions out there? If I upgrade the hard drive, what kind of money are we talking about?
PeterH

For a new hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC for regular hard drives and SSDs http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here are instructions on replacing the hard drive in a MacBook with a removable battery. http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
To transfer your current hard drive I like the free application SuperDuper. It makes a bootable copy of everything on your hard drive http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html You'll need a cheap SATA external hard drive case. Put the new drive in the case then format and partition the new drive and clone your old drive to the new one. Check that it's set up right by booting up from the external drive. Then replace your old hard drive with the new one and put your old one in the external case.
Here's a cheap SATA external hard drive case on Amazon http://www.amazon.com/Vantec-NexStar-2-5-Inch-External-Enclosure/dp/B002JQNXZC/r ef=pd_cp_pc_0
If you don’t have the tools to open up the MacBook OWC has a set for $5
http://eshop.macsales.com/item/OWC/TOOLKITMHD/

SC 3.2 Solaris 10 x86. When one node reboot, the other one does also

Configured a two node cluster with a EMC clariion san (Raid 6) for holding a zpool and use as quorum device.
When one node goes down, the other one does also.
There seems a problem with the quorum.
I can not understand or figure out what actually goes wrong.
When starting up:
Booting as part of a cluster
NOTICE: CMM: Node cnode01 (nodeid = 1) with votecount = 1 added.
NOTICE: CMM: Node cnode02 (nodeid = 2) with votecount = 1 added.
NOTICE: CMM: Quorum device 1 (/dev/did/rdsk/d1s2) added; votecount = 1, bitmask of nodes with configured paths = 0x3.
NOTICE: clcomm: Adapter nge3 constructed
NOTICE: clcomm: Adapter nge2 constructed
NOTICE: CMM: Node cnode01: attempting to join cluster.
NOTICE: nge3: link down
NOTICE: nge2: link down
NOTICE: nge3: link up 1000Mbps Full-Duplex
NOTICE: nge2: link up 1000Mbps Full-Duplex
NOTICE: nge3: link down
NOTICE: nge2: link down
NOTICE: nge3: link up 1000Mbps Full-Duplex
NOTICE: nge2: link up 1000Mbps Full-Duplex
NOTICE: CMM: Node cnode02 (nodeid: 2, incarnation #: 1248284052) has become reachable.
NOTICE: clcomm: Path cnode01:nge2 - cnode02:nge2 online
NOTICE: clcomm: Path cnode01:nge3 - cnode02:nge3 online
NOTICE: CMM: Cluster has reached quorum.
NOTICE: CMM: Node cnode01 (nodeid = 1) is up; new incarnation number = 1248284001.
NOTICE: CMM: Node cnode02 (nodeid = 2) is up; new incarnation number = 1248284052.
NOTICE: CMM: Cluster members: cnode01 cnode02.
NOTICE: CMM: node econfiguration #1 completed.
NOTICE: CMM: Node cnode01: joined cluster.
ip: joining multicasts failed (18) on clprivnet0 - will use link layer broadcasts for multicast
/dev/rdsk/c2t0d0s5 is clean
Reading ZFS config: done.
obtaining access to all attached disks
cnode01 console login:
Then this on the second node:
Booting as part of a cluster
NOTICE: CMM: Node cnode01 (nodeid = 1) with votecount = 1
NOTICE: CMM: Node cnode02 (nodeid = 2) with votecount = 1
NOTICE: CMM: Quorum device 1 (/dev/did/rdsk/d1s2) added; votecount = 1, bitmask of nodes with configured paths = 0x3.
NOTICE: clcomm: Adapter nge3 constructed
NOTICE: clcomm: Adapter nge2 constructed
NOTICE: CMM: Node cnode02: attempting to join cluster.
NOTICE: CMM: Node cnode01 (nodeid: 1, incarnation #: 1248284001) has become reachable.
NOTICE: clcomm: Path cnode02:nge2 - cnode01:nge2 online
NOTICE: clcomm: Path cnode02:nge3 - cnode01:nge3 online
WARNING: CMM: Issuing a NULL Preempt failed on quorum device /dev/did/rdsk/d1s2 with error 2.
NOTICE: CMM: Cluster has reached quorum.ion ratio 4.77, dump succeeded
NOTICE: CMM: Node cnode01 (nodeid = 1) is up; new incarnation number = 1248284001.
NOTICE: CMM: Node cnode02 (nodeid = 2) is up; new incarnation number = 1248284052.
NOTICE: CMM: Cluster members: cnode01 cnode02.
NOTICE: CMM: node reconfiguration #1 completed.
NOTICE: CMM: Node cnode02: joined cluster.
NOTICE: CCR: Waiting for repository synchronization to finish.
*{color:#ff0000}WARNING: CMM: Issuing a NULL Preempt failed on quorum device /dev/did/rdsk/d1s2 with error 2.{color}*
ip: joining multicasts failed (18) on clprivnet0 - will use link layer broadcasts for multicast
/dev/rdsk/c2t0d0s5 is clean
Reading ZFS config: done.
obtaining access to all attached disks
cnode02 console login:
But when the first node reboot, on the second node this message:
Jul 22 19:24:48 cnode02 genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinfo@0
Jul 22 19:30:57 cnode02 nge: [ID 812601 kern.notice] NOTICE: nge3: link down
Jul 22 19:30:57 cnode02 nge: [ID 812601 kern.notice] NOTICE: nge2: link down
Jul 22 19:30:59 cnode02 nge: [ID 812601 kern.notice] NOTICE: nge3: link up 1000Mbps Full-Duplex
Jul 22 19:31:00 cnode02 nge: [ID 812601 kern.notice] NOTICE: nge2: link up 1000Mbps Full-Duplex
Jul 22 19:31:06 cnode02 genunix: [ID 489438 kern.notice] NOTICE: clcomm: Path cnode02:nge2 - cnode01:nge2 being drained
{color:#ff0000}Jul 22 19:31:06 cnode02 scsi_vhci: [ID 734749 kern.warning] WARNING: vhci_scsi_reset 0x0{color}
Jul 22 19:31:06 cnode02 genunix: [ID 489438 kern.notice] NOTICE: clcomm: Path cnode02:nge3 - cnode01:nge3 being drained
Jul 22 19:31:11 cnode02 nge: [ID 812601 kern.notice] NOTICE: nge3: link down
{color:#ff0000}Jul 22 19:31:12 cnode02 genunix: [ID 414208 kern.warning] WARNING: QUORUM_GENERIC: quorum preempt error in CMM: Error 5 --- QUORUM_GENERIC Tkown ioctl failed on quorum device /dev/did/rdsk/d1s2.{color}
{color:#ff0000}Jul 22 19:31:12 cnode02 cl_dlpitrans: [ID 624622 kern.notice] Notifying cluster that this node is panicking
Jul 22 19:31:12 cnode02 unix: [ID 836849 kern.notice]
Jul 22 19:31:12 cnode02 ^Mpanic[cpu3]/thread=ffffffff8b5c06e0:
Jul 22 19:31:12 cnode02 genunix: [ID 265925 kern.notice] CMM: Cluster lost operational quorum; aborting.{color}
Jul 22 19:31:12 cnode02 unix: [ID 100000 kern.notice]
Jul 22 19:31:12 cnode02 genunix: [ID 655072 kern.notice] fffffe8002651b40 genunix:vcmn_err+13 ()
Jul 22 19:31:12 cnode02 genunix: [ID 655072 kern.notice] fffffe8002651b50 cl_runtime:__1cZsc_syslog_msg_log_no_args6FpviipkcpnR__va_list_element__nZsc_syslog_msg_status_enum__+24 ()
Jul 22 19:31:12 cnode02 genunix: [ID 655072 kern.notice] fffffe8002651c30 cl_runtime:__1cCosNsc_syslog_msgDlog6MiipkcE_nZsc_syslog_msg_status_enum__+9d ()
Jul 22 19:31:12 cnode02 genunix: [ID 655072 kern.notice] fffffe8002651e20 cl_haci:__1cOautomaton_implbAstate_machine_qcheck_state6M_nVcmm_automaton_event_t__+3bc ()
Jul 22 19:31:12 cnode02 genunix: [ID 655072 kern.notice] fffffe8002651e60 cl_haci:__1cIcmm_implStransitions_thread6M_v_+de ()
Jul 22 19:31:12 cnode02 genunix: [ID 655072 kern.notice] fffffe8002651e70 cl_haci:__1cIcmm_implYtransitions_thread_start6Fpv_v_+b ()
Jul 22 19:31:12 cnode02 genunix: [ID 655072 kern.notice] fffffe8002651ed0 cl_orb:cllwpwrapper+106 ()
Jul 22 19:31:13 cnode02 genunix: [ID 655072 kern.notice] fffffe8002651ee0 unix:thread_start+8 ()
Jul 22 19:31:13 cnode02 unix: [ID 100000 kern.notice]
Jul 22 19:31:13 cnode02 genunix: [ID 672855 kern.notice] syncing file systems...
Jul 22 19:31:13 cnode02 genunix: [ID 733762 kern.notice] 1
Jul 22 19:31:34 cnode02 last message repeated 20 times
Jul 22 19:31:35 cnode02 genunix: [ID 622722 kern.notice] done (not all i/o completed)
Jul 22 19:31:36 cnode02 genunix: [ID 111219 kern.notice] dumping to /dev/dsk/c2t0d0s1, offset 3436511232, content: kernel
Jul 22 19:31:45 cnode02 genunix: [ID 409368 kern.notice] ^M100% done: 136950 pages dumped, compression ratio 4.77,
Jul 22 19:31:45 cnode02 genunix: [ID 851671 kern.notice] dump succeeded
Jul 22 19:33:18 cnode02 genunix: [ID 540533 kern.notice] ^M

Hi,
the problem lies in the error message around the quorum device. The SC documentation, specifically the Sun Cluster Error Messages Guide at http://docs.sun.com/app/docs/doc/820-4681 explains this as follows:
414208 QUORUM_GENERIC: quorum preempt error in CMM: Error %d --- QUORUM_GENERIC Tkown ioctl failed on quorum device %s.
Description:
This node encountered an error when issuing a QUORUM_GENERIC Take Ownership operation on a quorum device. This error indicates that the node was unsuccessful in preempting keys from the quorum device, and the partition to which it belongs was preempted. If a cluster is divided into two or more disjoint subclusters, one of these must survive as the operational cluster. The surviving cluster forces the other subclusters to abort by gathering enough votes to grant it majority quorum. This action is called "preemption of the losing subclusters".
Solution:
Other related messages identify the quorum device where the error occurred. If an EACCES error occurs, the QUORUM_GENERIC command might have failed because of the SCSI3 keys on the quorum device. Scrub the SCSI3 keys off the quorum device and reboot the preempted nodes."
You should try to follow this advice. I would propose to chose a different QD before trying to do this, if you have one available. Is it possible that this LUN has been in use by a different cluster?
To scrub SCSI3 keys you should use the scsi command in /usr/cluster/lib/sc: ./scsi -c inkeys -d <device> to check for the existence of keys, and ...-c scrub.. to remove any SCSI3 keys.
Regards
Hartmut

Why does the sampling rate for my DAQCard-700 max out at 6578Hz regardless of the number of channels I'm sampling?

My DAQCard-700 is acting funny. I am using LABView 6.0.2 on a Dell Inspiron 8100 laptop for continuous analog input. For some reason my DAQCard-700 won't let me acquire multiple channels unless I create virtual channels in max and then run AI Config with a list of the virtual channel names. That's fine (but weird), but I max out my sampling rate at 6578 Hz, which is the max sampling rate if I would have sampled all 16 (Referenced, single-ended) AI channels. But I'm not -- I'm sampling 6 channels, as proven by the "number of channels" indicator in AI config and just looking at my data. If I sample just one channel, I can get up to 105248Hz. Is my card f
ried, or am I missing a hidden setting somewhere? I have the latest NIDAQ.

Hello;
By the description of your problem, everything is pointing us to a hardware failure.
There aren't any tricks to acquire multiple channels with that card.
The best way to go about this is to have NI to fix the board for you.
Regards
Filipe

ADF Tree Component Iterating through all nodes upon ONE node click...

Hi to all !. My name is Agustin and I live far away... In Cordoba Argentina to be specific !. My doubt would be the following one: I wanted the other day to build a af:tree component and put in the NodeStamp an commandLink with a setActionListener... So as to get the selected Node... In this case, I have category of books... Let say DataBase, Cloud Computing, Web Development and so on... But the misterious thing happens when I click on one node, and the action method in my backing bean is executed one time per each node the Tree has... I notices this coz I made a System.out.println()... My idea would be to detect the user click event so as to update a Table... My code is as follows !...
<af:tree value="#{backManager.listaCategoria}" var="cat"
binding="#{backManager.tree1}" id="tree1">
<f:facet name="nodeStamp">
<h:commandLink binding="#{backManager.outputText1}" action="#{backManager.outputText1_action}" >
<af:setActionListener from="#{cat}" to="#{backManager.selectedItem}" />
<h:outputText value="#{cat.label}"
binding="#{backManager.outputText2}"
id="outputText2"/>
</h:commandLink>
</f:facet>
</af:tree>
and my backing bean is:
public String ejecutarSeleccion()
Categoria cat = (Categoria) this.selectedItem.getValue();
System.out.println("Nombre: " + cat.getNombre());
return null;
This method is the action attribute from the command link !.
the selectedItem is an attribute of the type SelectItem !.
Where I would be making the mistake ?... Or should I implement the thing in a different way ?... Thankx ! :D

Hi,
its strange when you say it executes the action per each node in the tree. One thing tough I would change is to go from h:commandLink to af:commandLink as it allows you to set partialSubmit=true in which case a click on the tree doesn't refresh the whole tree. I then would add an f:attribute tag to the command link
<f:attribute name="cat" value="#{cat.id}"/>
On the command link I had the actionListener property pointing to a managed bean with a method like
public void onTreeNodeAction(ActioneEvent actionEvent){
RichCommandLink link = (RichCommandLink ) actionEvent.getUIComponent();
Object catId = link.getAttributes().get("cat");
// ... cast the catalog id to its type and you are ready to go
Another option would be to use the SelectListener of the tree and don't use a command link at all. You respond to tree node selection similar to here
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/83-bidi-synchronization-tree-form-401841.pdf
Frank

If one node maxed out

Similar Messages

Maybe you are looking for