IF statement is true THEN replace with 0 in box with formula

Hello.
Sorry maybe for very stupid question, but I have some kind of little problem.
I need to do this:
If the checkbox (B16) is TRUE (checked) then simply put 0 to field O16. How I can do it, if I already in this field have a formula?
Best reagards,
And thanks for help!

Hi Aviation,
I may be wrong, but this is how I see a simplified version of your question.
Formula in D2 (and Menu > Insert > Fill > Fill Down) is
=IF(A2=TRUE,0,MAX(C2-B2,0))
In my Region, I use a comma "," in formulas. If you use a semi-colon ";" the formula is
=IF(A2=TRUE;0;MAX(C2-B2;0))
Happy Flying!
Ian.
P.S. or replace TRUE with FALSE in the formula (thank you Badunit).
Message was edited by: Yellowbox. P.S. or replace TRUE with FALSE in the formula (thank you Badunit).

Similar Messages

What happened to my mail access on home page, it just vanishes after stat-up and is replaced with ads ? How do I fix it?

It's always worked until this past week, nothing changed by user that I know of. I've checked pop-up blocker to no avail. Using Avira free security, it updated a few days ago, did a restore after it was updated to before the update, didn't help either. Want let me open Hughes net mail in Fire Fox at all. Can access it from Explorer but hat Explorer, it's slower than Fire Fox. Any help is appreciated as I've run out of ideas.

I am not entirely sure what problems you are reporting.
# Home Page are you able to set that as required or not ?
#Webmail
#* I am not clear, are you able to open that with Firefox ?
#* I understand you are able to open it with Internet Explorer
Are you saying that your webmail is set as one of your home pages, but that it is replaced with something else ?
Do other websites and searches work ok in Firefox or are you also having other problems in Firefox use ?

Hp Mini 1010NR Can Solid State Hard Drive be replaced with a normal drive?

HP MINI 1010NR- Part Number FT315UA -8GB Solid State Drive Running Windows XP Home Edition
The Hard Drive is listed in Device Manager as a ide\disksandisk PSSD 8GB SSD 4.47
I have Windows XP fully updated and Microsoft Works 9.0 Fully updated on this computer and it reports that I am Low on Disk Space.
I love this computer but I must have more disk space to make it more functional to use.
My question is:
Can I replace the solid state drive with a platter type (normal) 250 gig hard drive. If so what size 1.8" or 2.5" and what capacity? Also, what type connector on the hard drive would I have to have to connect up to the computer? IDE- PATA -SATA?
I really hope that I can do this as it would make this computer very usefull to me.
Thank you,
Redtail1949

Hi,
The solid state drive is SATA (the 8GB SSD from the service guide is).
See this maintenance guide: http://h10032.www1.hp.com/ctg/Manual/c01683469.pdf
I can't say if a SATA hard drive will be working but a 16GB SATA SSD (probably 2.5", but you can find it out yourself) should work. The 16GB compatible SSD is SATA so I would buy one..
http://partsurfer.hp.com/Search.aspx?SearchText=507314-001
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

If more than 3 /n then replace with /br /br /br

Hi all,
how can I do the following:
if given string has more than three consecutive occurrences of /n
replace it with 
Thanks

Just tried it again and it is not replacing it.
I used this code
description = description.replaceAll("\r\n|\n"," ");and it works (replaces new line cars with s)
to replace each occurence of new line character with but then realized that I need to replace new line chars if there are more than three in a row.
When I use
str = str.replaceAll("\n{4,}", " ");it wold not replace it.
I guess the erro is here:
("\n{4,}",

Using tracing image, then replacing with background image

I am very new to Dreamweaver, and am trying to put together a very simple site.
I am using a tracing image for the layout table mode – and am tracing it exactly. However, when I out put it to test in my browser,
nothing lines up how it shows in my work environment.
Am i missing something "very" obvious? Thanks.

1) Don't ever use table layout mode. It's a terrible way to build web pages.
2) No matter how hard you try, you can't make stuff stick to a big background image. It's like trying to nail Jell-O to a wall.
Have a look at the following tutorials. These will get on the right track.
From Tables to CSS Web Design Part 1 -
http://www.adobe.com/devnet/dreamweaver/articles/table_to_css_pt1.html
From Tables to CSS Web Design Part 2 -
http://www.adobe.com/devnet/dreamweaver/articles/table_to_css_pt2.html
Post back if you run into any trouble.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

IPhone unlocked by carrier, will Apple replace with an unlocked phone in the event of a warranty replacement?

Hi there.
I use an iPhone with the Canadian provider, Fido. I purchased the phone from Fido and signed up for a 3 year contract in order to recieve the phone at the reduced price. I understand that Fido performs a carrier lock on the phone when you sign up in this way so that the phone can only be used on the Fido network.
At the moment I am in the process of cancelling my contract with Fido and switching over to another provider in Canada. After doing some research, I found out that Fido offers a service where they will unlock your phone from their network when you finish your contract, for a fee. Since I am cancelling my contract and paying the early cancellation penalty, my contract will be satisfied and I will be eligible for the unlock service. My plan is to have my iPhone unlocked by Fido so that I can use the phone with my new provider.
My question is this: If I have my phone legitimately unlocked by my provider, will Apple send me an unlocked phone in the event that their is a hardware failure covered under warranty, and I need a replacement iPhone? All my previous replacement iPhones have been, to my knowledge, locked by Apple back onto my provider before they are sent to me. But, it would be awfully annoying if a replacement phone came to me locked onto an old network that I no longer use.
Any information would be greatly appreciated! Thanks.

Are you sure about this? I thought so too, but when I received my replacement iPhone 6, it was locked again.
I bought a carrier locked iPhone. Then it was replaced with another carrier iPhone. This second phone (first replacement) was then unlocked. Later the unlocked iPhone was replaced with a third phone (second replacement). To my disappointment the second iPhone replacement is locked.
The Authorized Service center said that Apple made a mistake and should unlock it remotely ASAP. Apple Support however, says that iPhones are replaced with specifications of the originally initially purchased iPhone. If the original was unlocked, they would replace it with unlocked, but if it was locked then replaced with a locked and then unlocked by carrier. The carrier should be contacted again to unlock future replacements. I know it sounds ridiculous and illogical.
If an iPhone has been unlocked (obviously by a carrier), why would you replace it with a locked iPhone and ask the customer to contact his carrier and request another unlock for the replacement iPhone? So inefficient and could be a problem if the carrier allows only one unlock per year per line like most do, or if you are no longer a customer of that carrier.
Interestingly I found the following on Apple's "Hardware Warranty". Retrieved from: https://www.apple.com/legal/warranty/products/ios-warranty-document-us.html):
"Following warranty service your Apple Product or a replacement device will be returned to you as your Apple Product was configured when originally purchased, subject to applicable updates.”
What I understand from this is that replacements will be configured exactly as the originally purchased including any updates made to it. I believe unlock is considered an update.
Apple Support argues that the second device was unlocked (updated), but the original (initial / first) device was not unlocked. Therefore, I should deal with my old carrier to unlock this one.
How insanely ridiculous is that???

HT4314 Hello, I have an Iphone 3GS and can't connect to Game Center. It recognizes my apple ID account, states it was never used with Game Center. Then asks for country, birthdate, then returns to ask country again, then birthdate, and returns to the loo

Hello, I have an Iphone 3GS and can't connect to Game Center. It recognizes my apple ID account, states it was never used with Game Center. Then asks for country, birthdate, then returns to ask country again, then birthdate, and returns to the loop. Never ends the loop unless I cancel the setup process. I have restored the iphone to the factory settings and restored the backup, but did not work. Any suggestions on what can be the problem? thank you.

I just read another post that says you can go into a game that allows for multiple players and utalizes game center and enter your account information that way. I haven't tried it yet, but it seems to work for others that had this issue.

My ipod touch broke then replaced it with a new one. I already dloaded iOS5 on the old one. When I connected my new unit it says it won't load the previous back because the new one is not up to date... Do I really have to download iOS5 again?

My ipod touch broke then replaced it with a new one. I already dloaded iOS5 on the old one. When I connected my new unit it says it won't load the previous back because the new one is not up to date... Do I really have to download iOS5 again?

Yes, you have to update the iPod in order to retore from backup. The iOS on the "new" has to be aequal to r greater than on the iPod from which the backup was made. The iOS downloads are unique to an iDevice and model (the one for a 3G iPod will not work for a 4G iPod).

I synced my new iPad with my new macbook and when I tried to then sync my iPhone as well it says that all apps will be replaced with apps in my library. How do I sync without losing all of my existing iPhone apps?

I synced my new iPad with my new macbook and when I tried to then sync my iPhone as well it says that all apps will be replaced with apps in my library. How do I sync without losing all of my existing iPhone apps?

My guess is that you previously synced the iPhone with a different computer in the past. You will probably want to set up Home Sharing.
http://support.apple.com/kb/HT4620
Also see here:
http://support.apple.com/kb/HT3819

Possible to scan a document into Acrobat XPro,then replace part of that PDF with text or image file?

Hi everyone,
Is it possible first to scan a paper document into Acrobat X Pro, and then to replace a "pane" or box within that PDF with a text or image file?
Would it require SDK and Javascript?
Thanks,
Rick Weinhaus

CtDave and others:
Here's the problem in more detail.
I am a physician and I already have the ability to incorporate paper-based
documents into an electronic health record (EHR) by scanning them and
saving them as PDFs. The documents are paper patient encounter forms with
a different box or 'pane' for each category of data. Each box has a fixed
location on the paper form.
There are three situations, however, where I want to have the option to
overwrite certain boxes of the PDF with data generated by methods other
than scanning.
1) Insert text macros with variable fields using the electronic health
record's software.
2) Insert a drawing available as a pre-existing JPG or generated by using a
tablet.
3) Insert text generated using Dragon Naturally Speaking.
For efficient office workflow, in all three cases the text or image to be
inserted into the box or 'pane' in the PDF needs to be generated while I am
still seeing the patient -- that is -- before the paper form has been
scanned and converted to a PDF.
The sticky note tool is one option, but I would want to be able to modify
the default size of the sticky note so that it corresponded exactly to the
size of the box it was 'overwriting.' I can't figure out how to do this?
Could it be done using scripting?
Furthermore, I would want the sticky notes to automatically display when
the PDF was opened, so that a hover would close rather than open them. This
sticky note method would have the advantage of allowing the user to toggle
back and forth between inserted data and any original handwritten text.
Any thoughts?
Rick

[AS] CS3- Find any text with style, then replace that text with a new applied fill color.

I am trying to find the simplest way in cs3 to find any text with style, then replace that text with a new fill color. I can find text and change text. I can find a style and change it to a new style. I can't seem to find a style and change the applied fill color. I do not want to change the properties of the style, just the applied color. Yes, I want the + sign, for now. I know, why not update the style, I am not allowed to. Any help would be great. Since the search is not available, I need a new response.
Thanks.

You can work around the bug by just doing a find, then looping through the results, changing the color one at a time. It'll be a fraction slower, but should do the trick: tell application "Adobe InDesign CS3" set find text preferences to nothing set properties of find text preferences to {applied paragraph style:"The name"} set theFinds to find text document 1 repeat with i from 1 to count of theFinds set properties of item i of theFinds to {fill color:"Replace color"} end repeat end tell The bug is fixed in CS4, BTW. -- Shane Stanley <[email protected]> AppleScript Pro Florida, April 2009 <a href=http://scriptingmatters.com/aspro>

Tried opening a file in library and it states can't open database with library name? It says Relaunch then will not open? and Blocks me completely from Aperture. I have to go to Finder to Rename it? I need this file how do I get it to open?

Tried opening a file in library and it states can't open database with library name? It says Relaunch then will not open? and Blocks me completely from Aperture. I have to go to Finder to Rename it? I need this file how do I get it to open?

Aftershotz,
You're going to have to give a bit more information.
What do you mean by "opening a file in library?" There is no function of Aperture to open files -- you can open (switch) libraries.
You'll have to be more specific about error messages, too. Perhaps some screenshots would be useful to diagnose your problem. "Can't open database with library name" is not enough detail about what Aperture is really telling you.
nathan

How can I remove a person's face from a photo and then replace the spot with a person's face from another photo?

How can I remove a person's face from a photo and then replace the spot with a person's face from another photo?

In Editor, go to the expert tab.
Open picture B, the one you wish to select the "replacement" face from to add to another picture.
Use one of the selection tools, e.g. selection brush, lasso tool, to select the face. You will see an outline ("marching ants") once the selection is complete
Go to Edit menu>copy to copy the selection to the clipboard
Open picture A, then go to Edit>paste
Use the move tool to position the face from picture B to cover the face on A
In the layers palette you should see picture A as the background layer, and face B on a separate layer

I plugged my iphone 4S into my computer for the first time and then my photos were replaced with the ones from my old iphone, how do i get them back?

i plugged my iphone 4S into my computer for the first time and then my photos were replaced with the ones from my old iphone, how do i get them back?

Try restoring from the backup created at the beginning of the sync process:
Without connecting your phone, open iTunes, go to Preferences, on the Devices tab check "Prevent...from syncing automatically"
Connect your phone, right-click on the name of your phone when it appears on the left sidebar in iTunes
Select Restore from backup, choosing your most recent backup to restore from
Disconnect your phone and confirm that your photos are back
Go back to iTunes>Preferences>Devices and re-enable automatic syncing.

Any problem with replacing system true type fonts with postscript?

I want to replace the Times true type (d.font) font in the systems fonts folder with a Times Postscript font. Will this cause any problems? Are there any system true type fonts that can't be replaced with postscript fonts?

You should not deal with fonts inside /System/Library/Fonts/. Your system may not be able to boot!
Please read carefully the following link:
http://docs.info.apple.com/article.html?artnum=106417
Mihalis

IF statement is true THEN replace with 0 in box with formula

Similar Messages

Maybe you are looking for