If the flash object is placed in 0px div, the creationComplete event is fired after a long wait time

<Problem>
My requirement is to hide flash object on browser. However, If the flash object is placed in 0px div, the creationComplete event is fired after a long wait time. Is this a bug of Flex? (or Flash Player?)
<Sample Code>
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute"
          initialize="app_initialize(event);" creationComplete="app_creationComplete(event);" >
<mx:Script>
        <![CDATA[
        import mx.events.FlexEvent;
    private function app_initialize(evt:mx.events.FlexEvent):void
              ExternalInterface.call("alert", "application initialize.");
    private function app_creationComplete(evt:mx.events.FlexEvent):void
              ExternalInterface.call("alert", "application creation complete.");
    private function button_creationComplete(evt:mx.events.FlexEvent):void
              ExternalInterface.call("alert", "button creation complete.");
        ]]>
    </mx:Script>
    <mx:Button id="testButton"  label="button"  creationComplete="button_creationComplete(event);"/>
</mx:Application>
<Steps to reproduce>
1) Dowload the following samples
MySwf-src.zip
https://files.acrobat.com/a/preview/c6b7a191-c6c4-486f-9345-e2b5c21a4c0b
TestSwf.zip
https://files.acrobat.com/a/preview/98e613e1-63b1-4b2f-93f3-f6e4f4a27f24
2) Unzip TestSwf.zip.
3) Copy MySwf.swf, TestInvisible.html, and TestVisible.html to "c:\inetpub\wwwroot\". (Need to install the IIS.)
4) Visit "http://localhost/TestVisible.html" via IE. notice the creationComplete event fired after initialize event immediately.  -- Correct
5) Visit "http://localhost/TestInvisible.html" via IE. notice the creationComplete event fired a long time after initialize event.  -- Incorrect
<Environment>
Win8.1x64+IIS8.5+IE11+Flash player(13.0.0.182)
<Note>
If the flash object is placed in 1px or larger div, the creationComplete event is fired immediately.
The problem occurs with other browsers(IE9,IE10,FF,Chrome) too.

Thank you for your response. The computers are indeed running Flash Pro CC 13.1.0.226. I tried to generate a minidump file on four different computers where Flash Pro hung, but was not able to do so on any of them as Flash Pro makes the entire system unresponsive. I get the spinning circle cursor and then the GUI of all apps greys out and fails to update. I don't actually get any sort of error message; everything simply stops responding.
I was probably unclear above; even if I can alt-tab I can't really interact with any other programs once Flash Pro hangs beyond one or two mouse clicks. So on some computers I could right-click on the process in Process Explorer and choose to create a minidump, which then froze, or I might right-click on the process and have it immediatly freeze. I've experienced about two dozen crashes and I've never been able to really use another program or even kill the Flash process in task manager. I also have to power off the computer by holding down the power button, since while I might be able to open the Start menu I can't reach the point of being able to shut it down without it freezing.
From what I was able to see in Process Explorer, Flash Pro was using <1% CPU and 120M private / 170M working memory.

Similar Messages

  • How to apply branding in the Flash object

    Hello everyone,
    How we can apply the CSS to the flash object in Nakisa 3.0 (orgchart). for example changing colors fonts, etc..
    Br

    Hi Ibrahim,
    These elements cannot be changed without an enhancement from Nakisa. They have to include your new fonts/colours into the flash module. You must contact them directly to findout if/how/when this can be done and for what cost.
    Best regards,
    Luke

  • I am having problems with viewing flash plugins on websites. it seems that the firefox 5 is inlarging the flash piece thus skuing the image and inabling features of the flash object itself.

    most important issues i am having are the following are as follows:
    1) on www.alliedelec.com the main image in the flash rotating banner is skued from being enlarged.
    2)http://www.alliedelec.com/eaton-control-automation/ on the bottom of the page there is a flash video player which is missing the controlbar at the bottom and cutting off the video previews on the side due to the flash oject being enlarged.
    i have checked this in older versions of firefox and other browsers and ff5 is the only browser which is having an issue and one in need fixed asap.
    Please Help!!!!

    No problems here on Linux with the Flash objects on both pages.<br />
    I see the control bar.
    Make sure that you aren't zooming anything on that page.

  • I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

    I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

    Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.

  • I converted aif files to mp3 files in I tunes so I could put them on a flash drive.  Now when I transfer an album to the flash drive I get both the aif files and the mp3 files in the flash drive.  How do I get the iTunes to only copy the smaller file?

    I converted aif files to mp3 files in iTunes so I could put them on a flash drive.  Now when I transfer an album to the flash drive I get both the aif files and the mp3 files on the flash drive.  How do I get the iTunes to only copy the smaller file?

    My suggestion to use the smart playlist was more along the lines of making one list with rules to show everything in your library as long as it was kind "mpeg" (= mp3).
    Smart playlists cannot be edited manually, only by changing the rules.  You can use them as the basis for another smart playlist though.
    There is added overhead to using smart playlists, so don't go overboard.

  • After the upgrade to 3.6, my flash player crashes while I'm trying to play Farmville. I have tried updating the flash player. I have tried restarting the computer. Nothing is working.

    Last night, my system was still using Firefox 3.5.8. I was playing Farmville on Facebook and everything was working fine. This morning, I log onto my computer and find that I am upgraded to Firefox 3.6. I have been trying to play Farmville all morning, and the Adobe Flash Player keeps crashing. I have tried to update the Flash Player. I have tried restarting the computer. Nothing is working.
    == URL of affected sites ==
    http://facebook.com

    To anyone experiencing this problem after trying the steps I posted above, try this potential solution:
    # Open Tools->Add-Ons->Plugins, find Shockwave Flash, and press Disable
    # Hold down the '''Windows logo key''' and press '''R''' to bring up the ''Run'' dialog.
    # Type '''%APPDATA%''' and press OK.
    # Open the Adobe folder
    # Right click on the Flash Player folder and press '''Rename'''. Type in ''Old Flash Player'' as the new name.
    # Go back to the Application Data or AppData folder. (On Windows XP, click '''Up''' in the toolbar. On Windows 7 or Vista, click AppData in the address bar)
    # Open the Macromedia folder and repeat step #5
    # Go back to the add-ons window from step #1, and press Enable on Shockwave Flash
    # Try Farmville, Youtube, and other affected sites to see if the problem is fixed.

  • Captivate 6 Video Issue: "The flash video can not be loaded. The input may not be proper"

    I've already published this particular project with multiple videos embedded with no problems in Captivate 6. I had to change one video and went to re-publish the project. Upon completing the publish, I receive an error message on EACH slide that has embedded video:
    "The Flash Video Can Not Be Loaded. The Input May Not Be Proper"
    There wasn't any issues with the project until changing the one video that needed to swapped out. I also tried publishing this in Captivate 8 to the same results.
    Specs:
    Windows 7 Pro
    Captivate Version 6.1.1.240
    Intel Core i5 25-20 CPU @ 2.5 Ghz
    4 GB RAM
    32-Bit Operating System
    If anyone knows why this issue has presented itself and how we can get around it, much would be appreciated!
    Thanks,
    Jon

    Hi there,
    Thanks for reaching Adobe Community. Please accept my apologies for the inconvenience.
    I am a little confused here. Are you getting this error while inserting a FLV video through Insert option or inserting a video through Video > Insert Slide Video or inserting a new slide?
    Re-linking means reinserting the video file. If you have already tried reinserting the video file, then have you tried inserting a different video?
    Also what operating system you have on your system?
    Thanks!
    Shekhar

  • My external HD of 1TB is not being recognized by the iMac and when after a long waiting period it does, the whole computer becomes extremely slow. Do I need any particular add-on to make it workable?

    My external HD of 1TB is not being recognized by the iMac and when after a long waiting period it does, the whole computer becomes extremely slow. Do I need any particular add-on to make it workable?
    Before I updated to OS X Mavericks I was using another external disk that was getting disconnected ocasionally so I bought a new ADATA HD710 portable 1TB Drive and moved the files to it. This new drive which is supposed to be OS X Mavericks compatible takes minutes to show the files especially when opening second and third level folders which has made mu iMac unusable
    What should I do?

    Your Mac should be able to recognize many different types of drives (including Windows-formatted drives) immediately for Reading, provided they are in good working condition and not damaged. There should be no need to transfer to a different type of drive.
    If there is no recognition of this drive, see if it can be seen in Disk Utility.
    If your aim is to transfer the data on it DO NOT use ERASE or PARTITION as these will completely erase all the information on the Drive.
    If the drive is present while the Mac sleeps, it is likely to drop out and not be seen any longer, especially if it is a USB-powered drive.

  • Long waiting times when going back to the organizer after doing changes of images. Elements 11.

    After doing changes of images and going back to the organizer I have to wait a long time. This was not the case when I used elements 9. I have a lot of images stored around 18000. There are also often long waiting times when I move around in the organizer. Any suggestion?
    Bo Augustsson

    Please see blog: http://psekb.blogspot.in/2013/04/how-to-improve-pses-performance-please.html
    Please let me know if that doesn't helps.
    ~Andromeda

  • Is it possible to delay the flash on a T5i to fire at the end of a long exposure shot

    I'm wanting to take long exposure shots of dancers and would like the flash to fire at the end of the exposure instead of the begining to increse the depth of field right as the shutter closes. Is that possible using the on camera flash of a T5i and if so what are the settings?
    Thanks,
    John

    When you use a TTL flash (Canon's E-TTL or E-TTL II) the camera uses a multi-zone metering system (think of an imaginary grid system overlaying your image) and (1) meters with no flash at all, then (2) fires a pre-flash at very low power while simultaneously metering again.  It then compares the difference in each zone between #1 and #2 to determine how much of a difference the flash made.  By doing this it can identify highly reflective surfaces (e.g. mirrors, glass, reflective metals, etc.) and eliminate those from the flash evaluation.  It can also find zones where the flash seemingly made no difference at all (e.g. if there was a light source in that zone... such as a lamp) and elminate those.   Light sources and reflections would ordinarily fool a flash metering system into thinking it had produced enough light ... even if it hadn't.  With those zones safely eliminated it can then compare the difference for each zone between #1 and #2 to determine how much addtional power should be necessary to correctly light them.
    It does all of this during the pre-flash.   The shutter is closed when it does this (the light will not affect your image.)
    Then the shutter opens and at some point it fires the flash again... only this time using the power level calculated during the pre-flash phase.  Only this second firing of the flash will show up in your image.
    If you switch the flash to manual mode, you wont get a pre-flash.
    The on-board flash is useful as a "fill" flash (decreasing the severity of shadows) and it can be used as a primary flash IF the subject is reasonably close (e.g. around 10' is fine... 14' feet is a stretch and beyond that... not so great.)
    An externally attached speedlite flash can provide significantly more power.  It can also be located off-camera to provide better lighting (on camera lighting is "flat" because there's no highlight/shadow side to any 3D surface... textures look 2D as a result.)
    As for "depth of field"... this is a different problem and the flash can help, but there are some caveats.
    If you're shooting indoors with only the available light in the room, then you're likely in challenging circumstances and using lenses with wide-open apertures.  Hence the depth of field is fairly narrow.
    If you could increase the lighting then you could reduce the aperture opening and increase the depth of field.
    But there is a catch.... light exhibits a property sometimes called "fall off".  This is because it follows a rule in physics called the "inverse square law" whereby the intensity of light decreases as the distance from the light source increases.  Each time the distance from the light source increases by the square root of 2, the light intensity is cut in half (exactly half... that's not an approximation.)  E.g. the amount of light illuminating a subject which is 14.1 feet away from the flash will be exactly half as compared to a subject which was only 10' away.  The square root of 2 is approximately 1.41.  So 10 x 1.41 = 14.1.  
    This means if you are photographing two subjects... one is 10' away and the other is about 14' away then the more distant subject will only receive half as much light.  Suppose we go to a crazy distance... and we have a flash 100' away.  NOW the second person has to be 141' away before they get half as much light.  This means two subjects within just a few feet of each will not receive "noticeably" different levels of light.
    While placing the flash farther from the two subjects will reduce the difference in illumination on your near vs. far subject, built-in flashes cannot handle these larger distances... they don't have enough power.  But an external flash brings more power for you to do this.  
    Canon's speedlite model numbers actually provide an indication of their power level.  If you delete the trailing zero from the model number (e.g. in a 430EX II you'd omit the "0" and get "43"... in a 600EX-RT you'd omit one "0" and get "60', etc.) the number you get is the flash "guide number" in meters.  The "guide number" is an indicator of how far the flash can adequately illuminate a subject... but the f-stop and ISO settings you use on the camera will change this.  So the "guide number" uses a baseline ISO of 100 and a baseline f-stop of f/1.  Of course you don't have an f/1 lens but the baseline is used because it makes the math easy. You divide the guide number by the f-stop you are using.  e.g. if you are shooting at ISO 100 and f/8 then you'd divide your guide number (suppose you have a Canon Speedlite 600EX-RT.. that's a guide number of 60 meters) and you'd get 60 ÷ 8 = 7.5 meters.  Convert meters to feet and that works out to 24.6 (about 25').  Of course that's at ISO 100. Bump up to ISO 200 and you can multiply that distance by 1.41... or bump up to ISO stops to ISO 400 and you can double the distance (about 50'... and that's at f/8).
    I should caveat that this assumes you are pointing the flash directly at the subject and there are no light modifiers in use (no soft-diffusers, you aren't "bouncing" the flash off a ceiling or wall, etc.)
    Here's a Youtube video that might help you understand the light fall-off problem.
    Tim Campbell
    5D II, 5D III, 60Da

  • How can i set the html5 player by default in ubuntu instead of the flash player ? i just can use the flash player as default

    Well i use lubuntu 14.04 and i've realized that the html5 player on youtube works so much better than the flash player, but i can't use it by default, for play videos i have to request the html5 player, and the problem is when i restart the browser or when i turn off my computer, big is my surprise because youtube is using the flash player. If i disable the flash plugin is ok because youtube doesn't have another option but to use html5, but this is not the solution, because there is still some videos that use flash, and other web sites too. so: how can i fix this or i just have to wait that mozilla gives html5 support for linux, because on windows the default player is the html5. i'd really appreciate any help, thanks

    I usually use Ubuntu, and am not aware of HTML5 being the default for Flash videos on Windows.
    Is it more likely you have chosen an option on the YouTube website to use HTML5. I think this page offers support and includes an option to toggle HTML5 or FlashPlayer.
    * https://www.youtube.com/html5

  • Need to allow users to upload images (jpg) in the flash (.swf) from your local computer (with the drive C). Help, please.

    Faly .swf is on the server.
    The user loads the page HTMl file .swf.
    By clicking on button_mc the user can select from your computer (local disk) image file to upload not on the server and temporarily - to flash - the file.
    Фалй .swf находится на сервере.
    Пользователь загружает страницу HTMl с файлом .swf.
    По нажатию на кнопку button_mc пользователь может выбрать на своем компьютере (локальном диске) файл картинки для загрузки не на сервер, а временно - во flash - файл.
    Below given code works only if the image file .swf are in the same directory (folder).
    I know the file name, but I can not find the full local path to his computer to the selected file.
    Ниже приведенный код работает, только если картинка и файл .swf находятся в одной папке (folder).
    Я могу узнать имя файла, но не могу выяснить полный локальный путь на его компьютере до выбранного файла.
    How do I get my site you can download at home in my swf file to a photo to her dalsche work?
    Как сделать, чтобы пользователь моего сайта мог у себя дома загрузить в мой файл swf свою картинку, чтобы с ней дальще работать?
    button_mc.addEventListener(MouseEvent.CLICK, buttonClick);
    function buttonClick(event:MouseEvent):void {
    var mm:String = new String();
    var myFileReference:FileReference = new FileReference();
    var myFileFilter:FileFilter = new FileFilter("Images", "*.png;*.gif;*.jpg");
    try {
    myFileReference.browse([myFileFilter]);
    myFileReference.addEventListener(Event.SELECT, onSelectFile);
    function onSelectFile(event:Event):void {
    mm = FileReference(event.target).name;
    var loaderPic:Loader;
    loaderPic = new Loader();
    loaderPic.contentLoaderInfo.addEventListener(Event.INIT, initListenerPic);
    var urlClipPic:URLRequest = new URLRequest(mm);
    loaderPic.load(urlClipPic);
    function initListenerPic(event:Event):void {
    addChild(loaderPic.content);
    } catch (illegalOperation:IllegalOperationError) {
    trace("Ошибка");
    button_mc.buttonMode = true;

    My question was too difficult for everyone?
    Nobody has been able to help.
    I thought that in this forum a lot of professionals.
    It seems - I was wrong.
    If there is someone who can help, contact us.
    [email protected]

  • The flash player box will not go from the screen

    When trying to watch a TV episode the flash player box appears on the screen right in the middle of the screen, it can do be moved and no matter what I do it won't go away.  I have downloading the latest adove flash.

    Check http://forums.adobe.com/thread/867968

  • Adobe Air "The Flash Builder debugger failed to connect to the running application".

    Hi,
    I know this issue or bug, is well known here, but i only read problems with flex apps and im trying to debug an Air app, i've read almost all about this problem but i cant found a solution for this. I tryed rebooting my desktop, uninstalling and installing again, etc. I installed flash builder 4.6 on other computers and worked fine only my computer has the problem and i don't understand why.
    I have windows 7, 64 bits.
    I tryed to do a telnet to port 7935, i did this cause a read a post with suggesting doing that, the port does listen and throw me this error
    "▼∟disable_script_stuck_dialogon∟disable_script_stuckon↕∟break_on_faulton▬∟enumer
    ate_overrideon§∟notify_on_failureon↕∟invoke_setterson§∟swf_load_messageson¶∟gett
    er_timeout1500¶∟setter_timeout5000♦☺☺"
    I hope someone can help me.
    Thank you.
    Gabriel Vargas.

    I Installed the Flash Builder 4.6 and now i cant debug any flex or air app.. neither flex builder (flex 3).. i don't what to do.. i really need to debug my apps.. someones has to know an answer..

  • I'm having trouble downloading Mountain Lion from the app store with a long "waiting" time

    I tried to download mountain lion from the app store, but it has been in the "waiting" mode on my desktop for some time... What should I do?

    http://www.apple.com/support/mac/app-store/contact.html?form=account

Maybe you are looking for

  • HP Color LaserJet CM1017 MFP software will not reinstall

    I recently needed to reimage my computer due to an issue caused by the replacement of my hard drive.  I had the software to install and followed the directions very carefully.  Then purchased and changed printer cords and tried to reinstall the softw

  • Files and folders moved to NAS become read only.

    I just got an Iomega NAS. When I move files and folders to it from my Macbook, they become read only when they get there. Files from my girlfriend's PC stay read/write when they are moved to the NAS. I first noticed this with iTunes. I changed the lo

  • Having a bit of a nightmare with this laptop i have bought

    Hey, so i bought a second hand macbook pro 15 inch 2009 yesterday, it is to act as a sister computer to my imac for producing music on The guy who sold it to me sold me it with mountain lion on and final cut and some other programmes, however i didn'

  • Monitoring of Standalone EP 7.0 system in Solution Manager 7.0

    Hi Experts, I need to configure Solution manager 7.0 for monitoring EP 7.0 (Stand alone ) system. Can you share documents related to configuration of Solution Manager 7.0 for monitoring EP 7.0 system? Thanks, Anit

  • Report need to be displayed and sent to spool

    Hi All, I have a requirement to display the output and simultaneously send the report output to spool and show the status message that report output is sent to spool with XXX spool number. Can you please help me regarding this. Its classical report.