IFolder windows client works first but fails on 2nd connect

Hello,
this is a strange phenomenon. I installed iFolder server 3.8 on Ubuntu 10.04 as described in
http://www.x2b4.com/howto/how-to-install-ifolder-on-ubuntu-server (install from RPM).
Web access works fine from Linux and Windows. The windows client works totally fine initially, it connects, creates folders, synchronizes. But if I hit disconnect in the iFolder window and then try to connect again, the application crashes. On starting it again connection takes forever, asks for a password, and then crashes before the iFolder window appears. Next time I start, the iFolder window appears but at the next (automatic) synchronization connecting fails again.
What went wrong in between the initial configuration of the client and the next connection to the server????
Thanks for any ideas
Jan

hello
ia have the same problem.
have you solved it ?
regards
lukasz
Originally Posted by resap
Hello,
this is a strange phenomenon. I installed iFolder server 3.8 on Ubuntu 10.04 as described in
How to install iFolder on Ubuntu server (install from RPM).
Web access works fine from Linux and Windows. The windows client works totally fine initially, it connects, creates folders, synchronizes. But if I hit disconnect in the iFolder window and then try to connect again, the application crashes. On starting it again connection takes forever, asks for a password, and then crashes before the iFolder window appears. Next time I start, the iFolder window appears but at the next (automatic) synchronization connecting fails again.
What went wrong in between the initial configuration of the client and the next connection to the server????
Thanks for any ideas
Jan

Similar Messages

I am trying to look at my I cloud account on a pc in the library it normally works fine but now says problem connecting with the server. what can i do or is there an issue today

I am trying to look at my I cloud account on a pc in the library it normally works fine but now says problem connecting with the server. what can i do or is there an issue today

Hi...
Try restarting the AMDS > How to restart the Apple Mobile Device Service (AMDS) on Windows
iCloud system status reports everything green > Apple - System Status

Why do I see: iTunes Help is unavailable because your computer isn't connected to the Internet. IE9 works fine but iTunes does not connect to the store.

I have tried 4 days to get iTunes 10.4 working on my Win7 x64 machine. I purchased a new iPhone4 and after syncing it the first time, I can't connect to the iTunes store.
When I try to run iTunes Help, I get this message "iTunes Help is unavailable because your computer isn’t connected to the Internet." However IE9 and Google Chrome run as always...... no connection problems.
I have already uninstalled IE9 x64 and iTunes 10.4 x64 and reinstalled but still the same. I followed all the instructions I could find about firewalls, ports, SSL etc.
Diagnostice gives me this information:
Secure link to iTunes Store failed -----
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
DELL Inc. Studio XPS 435T
iTunes 10.4.1.10
QuickTime 7.7
FairPlay 1.12.20
Apple Application Support 2.0.1
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.2 (333.2)
Gracenote SDK 1.9.1.485
Gracenote MusicID 1.9.1.102
Gracenote Submit 1.9.1.133
Gracenote DSP 1.9.1.43
iTunes Serial Number 00CCABA00E06CFD0
Current user is an administrator.
The current local date and time is 2011-09-08 09:53:57.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 4800 Series
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 226dfd82342c16c01da33b35a257182c
iPodService 10.4.1.10 (x64) is currently running.
iTunesHelper 10.4.1.10 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {DA96EEE0-050D-4F34-86AF-08A8499F6D4A}
Description: TAP-Win32 Adapter V9
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 08:00:00 1970
Lease Expires: Thu Jan 01 08:00:00 1970
DNS Servers:
Adapter Name: {B28305D7-F1F3-471E-8E55-AA9DC8E1058D}
Description: Realtek RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.20)
IP Address: 10.0.1.8
Subnet Mask: 255.255.255.0
Default Gateway: 10.0.1.1
DHCP Enabled: Yes
DHCP Server: 10.0.1.1
Lease Obtained: Thu Sep 08 07:46:11 2011
Lease Expires: Fri Sep 09 07:46:11 2011
DNS Servers: 10.0.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-09-08 09:24:52.
　This means everything was successful except connecting to the firmware update server.. why can't I connect to iTunes store??????

Only fixed this in the last day or two . . .with this!
https://discussions.apple.com/thread/3588501?start=0&tstart=0

Working windows install on ssd but fails to boot when old hdd is removed

I bought a Samsung 840 ssd for my Thinkpad T510 to use as my primary hdd and an Ultrabay Sata adapter to mount an additional hdd. I clean installed Windows 7 64 bit on the ssd . Previously I was using 32 bit Windows but I because I also upgraded to 8 gb ram I needed to switch to 64 bit. I used the Windows USB DVD tool to create a bootable USB to install Windows from.
Everything went fine. Because I have two hdds both running windows, when I boot the computer it prompts me to pick which Windows 7 to run. Both run fine. However, and this is the problem I need help with, when I remove the original hdd leaving only the Samsung ssd the computer won't boot - it says no valid operating system.
I tried updating the BIOS but that didn't help.
Any ideas?
Thanks!!*
*Update: I used EasyBCD to copy the boot file to the ssd. Now I am able to boot fine on the ssd with the old hdd removed. So it would seem as if not having the boot file on the ssd was the problem. Still, when I boot up, I'm prompted to pick between booting Windows 7 (new ssd) and Windows 7 (old hdd thats no longer connected). Obviously if I pick the latter it fails to boot. If I pick the former it works fine (problem solved!), but I'd like to be able to skip this prompt when I turn on my comp. Any ideas?
Also, I'm curious why the boot file wasn't on the ssd already once I installed windows 7 on that drive. Is it because the old hdd was still physically connected while windows was installing? If re-installing windows on the ssd without any other drives present would likely make all these problems go away I'm inclined to just do that, but does anyone know for a fact why this would be necessary?
Thanks!!

I have had similar issues in the past, but it was nothing to do with the T510. It is solely a windows issue. It is happening because , with both the drives installed the system can "see" the modified boot file. When you take out the ultrabay hard drive the system can no longer see the boot file, hence no valis operating system.
For me to fix it in the past, was a bit of mucking around. First off see if you can download "vistaboot" pro v3.3. With that you should be able to copy the bootfile to the SSD. If you can't do that you'll probably have to use a Windows install disk, booting from the DVD drive, wait till it loads up, select keyboard info, and at the next screen choose "start up repair" .
Sad to say, even that is not a guaranteed fix; it failed for me last Friday and I had to do a fresh install. If you don't have a Windows DVD, google for X17-59465 or GSP1RMCULXFRER_EN_DVD. They are the latest version of Windows 7 x64 Ultimate.You should find valid, and legal, download links at digitalriver, the official microsoft site and they most likely be posted somewhere on the mydigitallife forums.
Have fun !!

VNC Bizarreness....3rd Party Client works perfectly but Mac's viewer doesnt

Hi guys,
Something rightly bizarre - I have reinstalled the OS on my media server (From Ubuntu to Mint) and set it up with the same network name, address, shares etc...the fileserver aspect is working A-OK, but I cannot screen-share with it anymore. The 'connecting to XXXX.local' just stays there ad-infinitum.
Jolly'sFastVNC will log in like a charm, though! To make matters even MORE confusing, once I hit 'Connect' from Finder, the remote computer acknowledges that command has been taken by another PC, but nothing on my mac happens...it doesn't spawn a new window...nowt! It's almost as if the VNC-viewer cache needs to be flushed, as it may have info from the 'old' iteration of VNC server....

Those are the correct settings, and they work with any email client that supports Imap.
Try again.

Windows update keeps trying but fails to install HP enterprise WSD multi-function printer update

I don't think we even need this update from Windows update but since upgrade to Windows 10, It keeps popping up as a failed update. I used to be able to HIDE unwanted updates. On this new os, I don't see an option to do that and the Windows 10 help site is NO HELP. Do I really need this and how do I stop the update notices? Thank you

Hi guys
The Acrobat is version 11.0.2 (Danish)
I'm downloading the patch AcrobatUpd11003.msp from http://www.adobe.com/support/downloads/detail.jsp?ftpID=5593
I'm lunching the installed Adobe Acrobat XI it straight away promts me for updating the application through Adobe Updater.
Any Ideas what i can do to solve the problem, i need to deploy the update to quite a lot of pcs so i cant run the update manually.

Cant install adobe flah player on windows xp it downloads but fails on installiing

i can no install adobe flash player on my wijndows xp system
it downloads but fais on installing

What is the error? Which version are you trying to install?
You will probably get more help in an Adobe/Flash support forum than a Firefox one...

ITunes 8.1 works great but killed wireless internet connection

I installed version 8.1 on both my laptop( PowerBook g4/ OS 10.4.11) and desktop (imac intel / OS 10.5) and after restarting the computer, the wireless internet connection stopped working on both.
I would open Safari and it would be a blank page and and the circle would keep spinning.
So I tried my laptop at a different wireless hotspot and had the same result.
I then tried repairing permissions and I got a list of problems with iTunes/Network Utilities, they repaired and now when I open Safari I get the message that it can not connect to the internet.
I do get an internet connection using ethernet on both.
Any ideas on how to fix this problem?

Did you by any chance also update the firmware on your Apple Airport Extreme (if that's what you have)?
I thought 8.1 killed my connection to my Apple TV, but it was the faulty firmware (see reports elsewhere in these forums).
Now that I have rolled back from 7.4.1 on my Airport I plan to try iTunes again (with white knuckles).
-dan

Itunes store works fine but says no internet connection

I am trying to upgrade to 2.2.1 for iPhone when I try to do update says I have no connection. I can go to music store and download music.I ran diagnostics and every test passes except internet connection. I do use AVG Free virus software and windowsirewall and it says that they are permitted.

I need help itunes store works fine need to connect so I can update my iphone. I use AVG virus software Any help graetle appreciated.
Microsoft Windows Vista Home Premium Edition Service Pack 1 (Build 6001)
To Be Filled By O.E.M. ConRoeXFire-eSATA2.
iTunes 8.1.0.51
QuickTime 7.6
FairPlay 1.2.12
iPod Updater Library 8.1d19
CD Driver 2.1.0.0
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.4.0.27
Apple Mobile Device Driver 1.40.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number ##########
Current user is not an administrator.
The current local date and time is 2009-03-18 13:45:40.
iTunes is not running in safe mode.
Video Display Information
ATI Technologies Inc., Sapphire RADEON X1600 PRO
ATI Technologies Inc., Sapphire RADEON X1600 PRO Secondary
** External Plug-ins Information **
Plug-in Name: LyricsSeeker plugin for iTunes, v2.1
Plug-in Loaded: Yes
Plug-in Version: 0.8
Plug-in File Version: 2.0.0.1
Plug-in Path: C:\Program Files\iTunes\Plug-ins\LyricsSeeker-iTunes.dll
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {25F3A7E0-58DD-4D94-97DA-9FC95C1BD8A1}
Description: Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
IP Address: #########
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.###
DHCP Enabled: Yes
DHCP Server: 192.168.1.###
Lease Obtained: Wed Mar 18 02:52:05 2009
Lease Expires: Thu Mar 19 02:52:05 2009
DNS Servers: 192.168.1.###
192.168.1.###
Active Connection: (none)
Connected: No
Online: No
Using Modem: Yes
Using LAN: No
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2009-03-17 03:31:17.
** iPod/iPhone Connectivity Tests **
iPodService 8.1.0.51 is currently running.
iTunesHelper 8.1.0.51 is currently running.
Apple Mobile Device service 2.12.36.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Texas Instruments OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Connected Device Information:
UofMBob's iPhone, iPhone running firmware version 2.2
Serial Number: ##########
Most Recent Device Not Currently Connected:
iPod nano running firmware version 1.3.1
Serial Number: ##########
** iPhone/iPod Touch Sync Tests **
Sync tests completed successfully.
Message was edited by: UofMBob

I just upgraded to firefox 6 and now cannot connect to the internet. IE still works fine but firefox won't connect. Any suggestions on how to get the new firefox to connect to the internet?

I just upgraded to ff 6.0.1 via an automatic push. Since then, ff hasnt been able to connect to the internet. Error message:
Firefox can't establish a connection to the server at www.google.com.Firefox can't establish a connection to the server at www.google.com.
IE has no trouble connecting to the internet.

After upgrading, your firewall may not be recognizing the new Firefox version and is not allowing it access to the internet. On your firewall progam's allowed applications list, remove Firefox, then re-start Firefox, try going to a website, your firewall will detect the new version of Firefox, then give the permissions needed for Firefox to have internet access.
*See: [https://support.mozilla.com/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox Cannot connect after upgrading Firefox]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Solution: iPad/iPhone Login issues with IIS as Reverse Proxy (Android and Windows Phone works)

Hi,
I had issues with iPad/iPhone access from external and tried a lot. Now I found my solution I like to share.
I setup a IIS on Windows Server 2012 with ARR 2.5 and Android and Windows Phone could login but not iPad and iPhone.
The IIS Log on the reverse proxy showed:
2013-02-26 12:03:31 <IP> POST /webticket/webticketservice.svc X-ARR-CACHE-HIT=0&X-ARR-LOG-ID=1996c8d7-09d0-4310-8da4-a8dfb7940e28 443 - <ClientIP> Lync%202010/1.6+CFNetwork/609+Darwin/13.0.0 - 401 0 0 124
2013-02-26 12:03:31 <IP> POST /webticket/webticketservice.svc X-ARR-CACHE-HIT=0 443 - <ClientIP> Lync%202010/1.6+CFNetwork/609+Darwin/13.0.0 - 502 3 12018 93
First Request gets a 401 while anonymous. Second try would be with authentication but it never reached the internal front end server.
After I installed a fix for ARR
http://forums.iis.net/t/1195560.aspx/1?ARR+502+3+Bad+Gateway+0x80072ef2+2147954418+The+supplied+handle+is+the+wrong+type+for+the+requested+operation the Apple Devices could login.

Hi,
This resolved our problem too!! So happy after 2 weeks of messing around with just about every setting recommended from all types of forums and rebuilding our reverse proxy I was at a loose end.
Our environment is Lync 2013 Enterprise, Lync 2013 Edge, IIS as Reverse Proxy on Server 2012 using ARR 2.5
We had Android and Windows clients working but no iOS devices at all. In the iOS log we were seeing
<h1>Server Error</h1></div><div id="content"> <div class="content-container"><fieldset> <h2>502 - Web server received an invalid response while acting as a gateway or proxy server.</h2> <h3>There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.</h3> </fieldset></div></div></body></html>
When the client was trying to retrieve from the webticketservice.svc
2013-04-11 17:19:44.659 Lync[4970:6c61000] INFO TRANSPORT TransportUtilityFunctions.cpp/907:<ReceivedResponse>
POST https://lyncwebext.contoso.com/webticket/webticketservice.svc
Request Id: 0x72cfc18
HttpHeader:Content-Length 1477
HttpHeader:Content-Type text/html
HttpHeader:Date Thu, 11 Apr 2013 16:22:25 GMT
HttpHeader:Server Microsoft-IIS/8.0
HttpHeader:StatusCode 502
Installed the HotFix from here:-
Hotfix for Microsoft Application Request Routing Version 2.5 for IIS7 (KB 2732764) (x64)
Rebooted the Reverse Proxy and iOS clients worked straight away for both Lync 2010 and Lync 2013 on both iPhone 5 and iPad both.
I hope this helps others as I was losing the plot :-)
Cheers
Sam

Creative zen plus works on one computer but it will not connect to my lap

I am trying to connect my creative zen plus to my laptop. I have been using it on my desktop. When I plus it in, I click open songs/files in folder, and it is as simple is that (I drag my songs into and out of my MP3 player).
I just tried plugging it into my laptop, and nothign happened. I then installed the software. Now, when I plug it into the laptop, I get a "found new hardware" message, but I cannot open up the folder to view the files like I do on my desktop. When I click the zen organizer, it says "device not found." Is there something that I need to install or update? I am sure that there is a way for me to be able to use this on both computers. Thanks for the help!

You need to install the software on the laptop before plugging the player in. Uninstall it then load it up again. If that doesn't work, this is the advice I got and it worked first time out:
. Please connect the player to another USB port. Use the ones on the
back of the computer. Remove all other USB devices. If you have another
computer, please try to test the player on that too.
2. Ensure that you are logged in as Administrator or have Administrator
rights assigned to you on the computer.
3. Check Device Manager and see if the player is detected.
a. Click Start and Control Panel (or Settings then Control Panel)
b. If the Control Panel is being displayed in the Category View (the
option Switch to Classic View should appear in the left pane), click
Performance and Maintenance and System. If the Control Panel is being
displayed in the Classic View (the option Switch to Category View should
appear in the left pane), double-click System
c. Select Hardware and then Device Manager.
Your player should be listed under Windows Portable Devices. Please
check if the computer sees it as a MTP Device.
If there is an error or a yellow exclamation mark next to the device,
right click the player listing and select Update driver.
Alternati'vely, you can uninstall the device, and reinstall it. Highlight
the MTP player listing, and press the Delete key on your keyboard, which
will uninstall the MTP device; click Actions ,and then click Scan for
hardware changes. Windows will install the necessary drivers.
That worked fine for me.

Open in a new Window noot working in OBIEE 11.1.1.6

Hi Experts
I have just installed 11.1.1.6 and found that "OPen in a new window " functionality is not working. I created a report and applied the action link in one of teh column value. I n teh properties , I set the link to open in a new window . But when I click on the values ofthat column the link appears but even after clicking on that link is not opening my navigated report. But if I make it to open in the same window , it works.
But as per teh requirements , the next report should open in new window . Pls help me :-(
Is there any specific javascript file i need to look into....Pls. help.
Regds

I also raised a SR on this....
Support was able to reproduce this issue and has created a bug
Bug 14165667 - LINKED REPORT OPEN IN NEW WINDOW DOES NOT WORK AFTER A CHANGE PROMPT
Thanks
Sundar

Messaging working in BlazeDS deployed on Windows Tomcat but failing in Tomcat deployed on Ubuntu

I have been going round and round on this for days. I have no idea how to solve it. Everything works fine in windows but now I have to move to Ubuntu. I set up a streaming server with BlazeDS which is messaging to my clients great when my war is in tomcat 7 on windows but is failing in tomcat 7 on Ubuntu.
I see my client connect to BlazeDS on Ubuntu. The DEBUG messages print out that I have a client subscribed. It says that I have one FlexSession for an id and one client subscribed to streaming-amf. Then, a few seconds later, it says that the client sent a duplicate request "streaming-amf recieved a duplicate sreaming connection request from, FlexClient with id ... Faulting request."
Next the log files print out that there are no streaming clients for the FlexSession and no streaming clients for the endpoint streaming-amf.
This is the same software that works fine in the Windows Tomcat container but is not in Ubuntu Tomcat even though the WAR is exactly the same. In case it helps, my config files and calls are below:
messaging-config.xml
    <destination id="sp-streamingchannel">
                       <properties>
            <network>
                <session-timeout>0</session-timeout>
                <throttle-inbound policy="ERROR" max-frequency="50"/>
                <throttle-outbound policy="REPLACE" max-frequency="500"/>
            </network>
            <server>
                <allow-subtopics>true</allow-subtopics>
                <subtopic-separator>.</subtopic-separator>
                <max-cache-size>1000</max-cache-size>
                <message-time-to-live>0</message-time-to-live>
                <durable>true</durable>
            </server>
        </properties>
            <channels>
             <channel ref="streaming-amf"/>
            </channels>
           <adapter ref="SPStreamingAdapter"/>
           </destination>
services-conf.xml
    <channel-definition id="streaming-amf" class="mx.messaging.channels.StreamingAMFChannel">
              <endpoint url="http://localhost:8080/SP-Web-1.0/messagebroker/spamf" class="flex.messaging.endpoints.StreamingAMFEndpoint"/>
                    <properties>
                        <idle-timeout-minutes>0</idle-timeout-minutes>
                        <max-streaming-clients>150</max-streaming-clients>
                        <server-to-client-heartbeat-millis>5000</server-to-client-heartbeat-millis>
                              <user-agent-settings>
                      <user-agent match-on="MSIE" kickstart-bytes= "2048" max-streaming-connections-per-session="2"/>
                      <user-agent match-on="Firefox" kickstart-bytes="0" max-streaming-connections-per-session="4"/>
                      <user-agent match-on="AdobeAIR" kickstart-bytes="2048" max-streaming-connections-per-session="2" />
            </user-agent-settings>
                    </properties>
          </channel-definition>
The calls in Flex:
public var channelDest:String = "http://98.193.212.138:8080/SP-Web-1.0/messagebroker/spamf";
private var channelName:String = "streaming-amf";
channelSet = new ChannelSet();
channel = new StreamingAMFChannel(channelName, channelDest);
var c:StreamingAMFChannel = new StreamingAMFChannel();
channelSet.addChannel(channel);
channel.connect(channelSet);
consumer = new Consumer();
consumer.destination = "sp-streamingchannel";
consumer.channelSet = channelSet;
consumer.subtopic = "table." + tableID;
consumer.subscribe();
Why would this work fine on one server but fail on the other? Thanks so much for any help you can offer.
While it may not be releavnt to this question, I do have remoting working fine with BlazeDS on both systems. When my app starts, the user has to log in. All of that is done with BlazeDS and is working fine on both Win and Ubuntu. I only have a problem when it comes to streaming with BlazeDS as is shown above.

I have been going round and round on this for days. I have no idea how to solve it. Everything works fine in windows but now I have to move to Ubuntu. I set up a streaming server with BlazeDS which is messaging to my clients great when my war is in tomcat 7 on windows but is failing in tomcat 7 on Ubuntu.
I see my client connect to BlazeDS on Ubuntu. The DEBUG messages print out that I have a client subscribed. It says that I have one FlexSession for an id and one client subscribed to streaming-amf. Then, a few seconds later, it says that the client sent a duplicate request "streaming-amf recieved a duplicate sreaming connection request from, FlexClient with id ... Faulting request."
Next the log files print out that there are no streaming clients for the FlexSession and no streaming clients for the endpoint streaming-amf.
This is the same software that works fine in the Windows Tomcat container but is not in Ubuntu Tomcat even though the WAR is exactly the same. In case it helps, my config files and calls are below:
messaging-config.xml
    <destination id="sp-streamingchannel">
                       <properties>
            <network>
                <session-timeout>0</session-timeout>
                <throttle-inbound policy="ERROR" max-frequency="50"/>
                <throttle-outbound policy="REPLACE" max-frequency="500"/>
            </network>
            <server>
                <allow-subtopics>true</allow-subtopics>
                <subtopic-separator>.</subtopic-separator>
                <max-cache-size>1000</max-cache-size>
                <message-time-to-live>0</message-time-to-live>
                <durable>true</durable>
            </server>
        </properties>
            <channels>
             <channel ref="streaming-amf"/>
            </channels>
           <adapter ref="SPStreamingAdapter"/>
           </destination>
services-conf.xml
    <channel-definition id="streaming-amf" class="mx.messaging.channels.StreamingAMFChannel">
              <endpoint url="http://localhost:8080/SP-Web-1.0/messagebroker/spamf" class="flex.messaging.endpoints.StreamingAMFEndpoint"/>
                    <properties>
                        <idle-timeout-minutes>0</idle-timeout-minutes>
                        <max-streaming-clients>150</max-streaming-clients>
                        <server-to-client-heartbeat-millis>5000</server-to-client-heartbeat-millis>
                              <user-agent-settings>
                      <user-agent match-on="MSIE" kickstart-bytes= "2048" max-streaming-connections-per-session="2"/>
                      <user-agent match-on="Firefox" kickstart-bytes="0" max-streaming-connections-per-session="4"/>
                      <user-agent match-on="AdobeAIR" kickstart-bytes="2048" max-streaming-connections-per-session="2" />
            </user-agent-settings>
                    </properties>
          </channel-definition>
The calls in Flex:
public var channelDest:String = "http://98.193.212.138:8080/SP-Web-1.0/messagebroker/spamf";
private var channelName:String = "streaming-amf";
channelSet = new ChannelSet();
channel = new StreamingAMFChannel(channelName, channelDest);
var c:StreamingAMFChannel = new StreamingAMFChannel();
channelSet.addChannel(channel);
channel.connect(channelSet);
consumer = new Consumer();
consumer.destination = "sp-streamingchannel";
consumer.channelSet = channelSet;
consumer.subtopic = "table." + tableID;
consumer.subscribe();
Why would this work fine on one server but fail on the other? Thanks so much for any help you can offer.
While it may not be releavnt to this question, I do have remoting working fine with BlazeDS on both systems. When my app starts, the user has to log in. All of that is done with BlazeDS and is working fine on both Win and Ubuntu. I only have a problem when it comes to streaming with BlazeDS as is shown above.

I have a script that works with no issues in XP but fails every time in Windows 7

All the script is supposed to do is get the ip address of the client and add .5 to the last octet passing this ip address through to remote desktop. It performs fine in XP but fails on a join error in 7 or 8. Any help?
' SCRIPT to determine IP address of Terminal Server in Field installation
' ASSUMPTIONS: terminal device has been booted after DHCP server
' is operational. Calculation of server IP address is based
' on terminal device's IP address.
' PROCESSING:
' Obtain IP Address from Registry (NB: WMI doesn't work...)
' Compute server's IP Address by replacing own IP address's
' last octet with the number 5
' Invoke the TS client in fullscreen mode using the newly
' computed address
' When done with session, present MSGBOX -- otherwise, the TS
' session times out and restarts, leaving a bunch of sessions active
' VERSION:1.1
' DATE: September 6, 2007
' AUTHOR: Dom
' CHANGE LOG
' 1.0 Original, using registry hack
' 1.1 Modified to use WMI
' 1.2 May 2008 - Added msgbox
' 1.3 August 2008 - Translate msgbox
option explicit ' force all variables to be declared
' *** Start of script ***
Const wbemFlagReturnImmediately = &h10
Const wbemFlagForwardOnly = &h20
Dim WshShell, ObjNet
Dim StrComputer, Server
Dim objWMIService
Dim colItems, objItem
Dim strDefaultIPGateway, strIPAddress, strIPSubnet, cIPAddress
Set WshShell = WScript.CreateObject("WScript.Shell")
Set objNet=CreateObject("wscript.Network")
'Get the Computer's network name
strComputer=objNet.ComputerName
' Connect to root of management interface for this computer
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\CIMV2")
Set colItems = objWMIService.ExecQuery("SELECT * FROM Win32_NetworkAdapterConfiguration", "WQL", _
wbemFlagReturnImmediately + wbemFlagForwardOnly)
For Each objItem In colItems
strDefaultIPGateway = Join(objItem.DefaultIPGateway, ",")
strIPAddress = Join(objItem.IPAddress, ",")
strIPSubnet = Join(objItem.IPSubnet, ",")
exit for
Next
cIPAddress=split (strIPAddress,".",4)
Server = cIPAddress(0) & "." & cIPAddress(1) & "." & cIPAddress(2) & ".5"
WshShell.Run "%SystemRoot%\System32\mstsc.exe /v:" & server & " /f",,true
dim answer
answer = msgbox ("Click OK to log in to server, Cancel to terminate session" & vbcrlf & "Cliquez OK pour ouvrir une session sur le serveur, ou CANCEL pour fermer la session.",1 + 64 + 4096)
if answer = 1 then 'that would be "OK"
wshshell.run "wscript c:\windows\connect.vbs"
else
wshShell.run "shutdown -L"
end if
' END

After removing all of the lines that do nothing or introduce subtle errors her eis swhat the script actually needs to do.
' get local address
Set objWMIService = GetObject("winmgmts:\\.\root\CIMV2")
Set colItems = objWMIService.ExecQuery("SELECT * FROM Win32_NetworkAdapterConfiguration WHERE IPEnabled=True")
For Each objItem In colItems
IPAddress = objItem.IPAddress(0)
Next
' fix address
ip=Split(IPAddress,".")
ip(3) = 5
TSServerIP = Join(ip,".")
' Run the ssession
Set WshShell = WScript.CreateObject("WScript.Shell")
WshShell.Run "%SystemRoot%\System32\mstsc.exe /v:" & TSServerIP & " /f",,True
answer = msgbox ("Click OK to log in to server, Cancel to terminate session" & vbcrlf & "Cliquez OK pour ouvrir une session sur le serveur, ou CANCEL pour fermer la session.",1 + 64 + 4096)
if answer = 1 then 'that would be "OK"
wshshell.run "wscript c:\windows\connect.vbs"
Else
wshShell.run "shutdown -L"
end if
Much shorter and much easier to understand. Fewer logic errors.
¯\_(ツ)_/¯

IFolder windows client works first but fails on 2nd connect

Similar Messages

Maybe you are looking for