IFolder3 and Datasync on same OES server

I have just managed to install Data Synchronizer Mobility Pack 1.25 on OES SP1. However, in order to make it work correctly (as per the install guide) I had to disable Apache2.
I believe that iFolder3 uses Apache2.... can I not use my OES server for both applications?

On 21/03/2013 03:46, Joseph Marton wrote:
> No, you cannot. In fact, Data Sync is not supported on OES at all,
> only plain SLES.
As I noted in this thread @
http://forums.novell.com/forum/showthread.php?t=465011
HTH.
Simon
Novell Knowledge Partner
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Technology Transfer
Partner (TTP) program. See novell.com/ttp for more details.

Similar Messages

  • How to install oracle 11g and 10g on same linux server.

    how can i install oracle 10g and 11g on same linux server ????
    10g database is already installed , i want to installed 11g on the same machine. How can i do this???

    Hi;
    how can i install oracle 10g and 11g on same linux server ????
    10g database is already installed , i want to installed 11g on the same machine. How can i do this???You may go wiht different mount point like to create /oracle11g and /oracle10g and you can choose related path for your installation.
    Please read:
    Managing multiple oracle home
    http://docs.oracle.com/cd/B12037_01/em.101/b12140/3_oui_oracle_homes.htm#i1005615
    http://docs.oracle.com/cd/B12037_01/em.101/b12140/3_oui_oracle_homes.htm
    Regard
    Helios

  • Implementing e-Recruitment and HR on same/different server

    Hi Friends,
    We are in the process of implementing e-Recruitment for an Organisation with approx. size of 15,000 employees. This will also include Internal Job Postings.
    I have the following questions in this respect:
    1. Should E-Recruitment 6.0 and HR ECC 6.0 be implemented on the same server or seperate servers ? What are the pros and cons in both the
    scenarios ??
    2. Should the E-Recuitment portal server be different from the HR-ESS
        server or shall it be implemented on top of ESS portal 7.0 ??
    3. Which server scenario is recommended ?
    Regards,
    Shashank

    Hi Shashank
    1.  Its not mandatory that ECC & E recruitment shd in the seperate servers.  But because of few security reasons, they will be maintained seperately.  For example:  E recruitment will be accessed by the external people also, who want to apply for external job posting.  So, there is a risk for ECC for exposure of data like employee master data, financial details etc., actually this risk is not direct, but by any chance that someone might hack to get the data - just to avoid the chances, thats all.
    2.  The Erecruitment & ESS can be in the same server for internal job posting
    3.  Better suggestion would be ECC & E rec would be in seperate servers.
    Regards
    Sirisha

  • Running 8i and 10g on same UNIX server

    Greetings,
    I am a developer playing DBA, so please forgive me if these are elementary questions. I have no DBA support.
    I have a Solaris 8 server currently running operational software using 8i. My requirement is to load and test 64bit 10g without interfering with the operational system, then test the s/w. Later, I need to switch from 8i to 10g with little or (preferably) no downtime. It would be nice run the two in parallel before the switchover.
    I have a duplicate setup in the development lab, which is what I am working on right now.
    I was able to get 10g loaded without any apparent problems. However, when I try to run 8i and 10g, the listener’s conflict.
    After reading through various forums this morning, I have a few questions that I am hoping someone can answer.
    1. Oracle 8i is owned by user oracle. I loaded 10g as user ora10g. Should I have loaded 10g as user oracle? If so, how do I keep it from overwriting critical 8i files that are in /usr/local/bin, etc?
    2. Oracle 8i’s ORACLE_HOME is /usr/opt/oracle. 10g’s is /export/ora10g. Does 10g need to be in /usr/opt/ora10g? If so, can I set up a link to simulate this, or do I need to reload?
    Thanks in advance,
    Linda

    Won't say much about the platform (solaris) aspect here but anyway...
    1. You could and sometimes should have a different oracle software owner user for installing/managing software, either is ok. You also might want a different group to own the oraInventory (software catalog).
    You can always enter somethng other than default when prompted by root.sh - why not e.g. /home/ora10g/bin?
    2. I dont think it needs to be installed anywhere, but /export is a bit unusual isn't it? Used for nfs etc.

  • Possible to use both Tabular and Multidimentinal with same SharePoint 2013 farm?

    I would like to build SharePoint 2013 based reporting portal with Power View as visualization tool.
    Is it possible to install both Tabular and Multidimentional to same physical server?
    Is it possible that some Power View reports use tabular and others multidimentional?
    Could above requirement work in production environment? Anybody tried?
    Kenny_I

    Hi Kenny_I,
    According to your description, you are going to create a PowerView report using SQL Server Analysis Services Multidimensional database or SSAS tabular model as data source in SharePoint 2013, now what you want to know is that is it possible to install both
    Tabular and Multidimensional to same physical server? And is it possible that some Power View reports use tabular and others Multidimensional?
    Of course we can install both Tabular and Multidimensional to same physical server that had SharePoint 2013 installed. In my tested environment, I have installed all of them on the same server. And we can use tabular model and others Multidimensional database
    on individual PowerView report. However, it seems that we cannot use both tabular model and others Multidimensional database on the same Powerview report.
    Even though we can install both Tabular and Multidimensional to same physical server, however in the production environment, the recommendation is that install them on different server, it will beneficial to troubleshooting the issue when some issue occur
    on the environment.
    If you have any questions, please feel free to ask.
    Regards,
    Charlie Liao
    If you have any feedback on our support, please click
    here.
    Charlie Liao
    TechNet Community Support

  • I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don'

    I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the ''Safe mode'' start window.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

  • How to work with two different backend with same MI Server and war file

    Hi All,
    We have a requirement that we need to work with one Middleware for two backends. For that we had to copy MAM30 sync bo's to zsync BO'S with the name ZMAM30. Now both sync BO'S will point to different backends.
    I have a standard war file which was working well with standards sync bo's. Now to work on zsync bo's what all the changes do I have to do in the standard war file(code).
    As per my knowledge we have a file called "syncbonamelist.properties" which maps the sync bo keys. Also there is another file called "mapping.xml" file which maps the package name with BO name.
    Can any body please tell me, are there any other files needed to be change like "meRepMeta.xml", other than any existing code like java objects are also needed to be changed.
    Your help in this regard is highly appreciable.
    Regards
    Murthy

    Hi Murthy,
    I try to get my head around the question:WHY?
    The reason for my question is, that this influences the answer!
    Because of several reasons it is NOT possible to handle MAM and zMAM Bos at the SAME TIME on the SAME MACHINE in the way you describe it - and it makes no sence to do so at all! But anyway......
    Lets say you have two backends, cause you have two different areas of the company. But both want to use the same MI server - but the client should be independend.
    So you need two apps. One uses the MAM BOs and the second one uses the zMAMBos.
    If this is the case, dev should be straight forward I think and you solution should work already......... so I ask myself, what is the problem you have? Do you get an error?
    - First create a new MEREPMETA-XML with just the zMAMBOs instead of the MAM BOs.
    - Change the two files you mentioned above.
    This should be all then.
    If you have a look into the implementation for MAM001Impl for example, there you find a line like:
         private static final String SYNC_BO_NAME
              = ResourceBundle.getBundle("com.sap.mbs.mam.bo.impl.syncbonamelist").getString("MAM30_040");
    This takes the name from the properties file and maps it to the real BO. So changing the name in the property file to
    MAM30_040 = zMAM30_040
    will result in MAM uses the zMAM BOs.
    Be aware: after you place the WAR file in the WEBAPPS folder and do a restart to deploy the file, you need to do a data reset to make sure the new MEREPMETA.XML is read.
    AND: two apps! one for MAM and one for zMAM BOs. One APP is not possible! Cause if you have something like that in the properties file:
    MAM30_040 = MAM30_040
    MAM30_040 = zMAM30_040
    if will only take the first reading.
    But I think this is clear to you anyway
    Regards,
    Oliver

  • Multiple domains and multiple IPs in the same MacMini Server

    I am sure that this topic has been faced already but I cannot find enough information to really dig into a solution.
    I have a macmini server with two IPs let say x.x.x.12 and x.x.x.13 .
    The server is set up on the first IP. It has his primary zone, machine record, mail aslias and www alias.
    Lets call the server domain server.domain1.com
    Everything works fine I have a couple of local users and a couple of LDAP users. Just to test the machine setup.
    I can send and receive emails using any of the users as [email protected]
    Now I would like to have another domain, domain2.com in the same server .
    The final goal is to have users under different domains. They have their own email box, calendar, etc.
    It will be preferable that I can share the same username with different domains. But I can live without that option.
    My first test was to have the second domain called server.domain2.com using the second IP. x.x.x.13 .
    For that I created another Primary Zone with domain2.com as machine record of x.x.x.13 . To use the second IP I simply create another Ethernet interface on the macmini.
    In the Mail -> Advance settings I added the host aliases as well as virtual hosting domains for domains2.com.
    With this setting I can send emails as [email protected] or [email protected] but when I replay to their messages I get a "Relay access denied" error from server.domain1.com .
    I also tryed another domain pointing to x.x.x.12, the same as server.domain1.com . I did not create any extra Primary Zone but the local host aliases and the virtual hosting domains.
    Same issue. I can send but I get a "Relay access " error.
    As you might notice I am a novice on servers settings. I just try to recreate a similar environment common to Virtual Hosting providers for my own website playground but I cannot cut through this email configuration obstacle.
    Any significant meaning that can be leading me to learn how to do it will be very very appreciated . (beside lynda,com tutorials that I followed already but do not mention multiple domains for mails).
    Thanks

    the problem I try to solve is to manage multiple domains in one MacMini Server.
    Having two IPs is secondary.
    I would like that each domains has his own users with emails, iCals, Wiki and web sites.
    The main problem is having emails to work for any additional domain beside the default one on the machine IP.
    I also got an additional IP address to be used on the same server hoping that it make things easier but apparently is making things more difficult.

  • Communication between the DNS/DHCP Manager and OES Server

    No communication between the DNS/DHCP Manager Console and OES server (status,start,stop)
    The screenshot shows the tab "DHCP (OES Linux)" in the DNS / DHCP Manager console
    in the bottom of the image it shows the state of the DHCP servers.
    allDHCP.JPG
    The dhcp service is started on all these servers
    You can see that the status is known only for four servers.
    The button "start/stop DHCP service" works fine on this servers and
    the dhcp service can be canceled and also restarted
    But the status of the "dhcp service" is not recognized for all the other DHCP servers
    and so we can not start or stop dhcp service on these servers.
    All servers were installed at different times (last three years) with OES11 and
    are upgraded to OES11SP2 with all patches.
    The server keto (DHCP_keto) is a new installation OES11SP2 few days ago.
    All OES servers were set up identically from me. LDAP, LUM, DMS, DHCP works fine.
    Which service on the OES server is responsible for
    communication (status indicator) between the DNS/DHCP Manager and the OES serve?
    How the status query is performed by the DNS/DHCP Manager?
    How can I test the communication to the server on the client (console)?
    Which configurationfiles I should be compare on the server?
    Thanks in advance
    Gernot

    gernot,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://www.novell.com/support and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Forums Team
    http://forums.novell.com

  • I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server

    I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server, despite following the Systemline instructions that impy this can be done.
    Can anyone please advise what I am doing wrong?

    Hi LowLuster
    Thanks for reply. I am not an expert on these sharing protocols but I think I have turned on SMB sharing but still wont connect. I tried adding netwrik drive by using cntrl K in finder and using smb\\network address but nothing. It is driving me mad!!

  • Face time no longer works for me. Lost my contacts even! Keep trying to change PWD and keep getting same error message: The server encountered an error processing registration. Please try again later. Can you advise? Thanks!

    Face time no longer works for me. Lost my contacts even! Keep trying to change PWD and keep getting same error message: The server encountered an error processing registration. Please try again later. Can you advise? Thanks!

    Face time no longer works for me. Lost my contacts even! Keep trying to change PWD and keep getting same error message: The server encountered an error processing registration. Please try again later. Can you advise? Thanks!

  • Our exchange server crashed and we lost all contact and calendar data.  We found an app to get the contacts off of people's phone to import but can't find the same for calendar.  How do I get my calendar info off my phone and in to new exchange server?

    Our exchange server crashed and we lost all contact and calendar data.  We found an app to get the contacts off of people's phone to import but can't find the same for calendar.  How do I get my calendar info off my phone and in to new exchange server?

    You'd have to think through this, but it seems like if you are using Outlook, and the items vanished from the Outlook client as well as the server,that you could re-populate Outlook using iTunes. 

  • Sizing of Oracle IdentityManager and Access Manager on same Weblogic Server

    Hi ,
    We are planning to deploy Oracle Identity Manager and Access Manager on the same weblogic server in different domains.We have user base of 25000 users.
    We can propose two different weblogic servers for OIM and OAM ?
    Please let me know the best hardware and software requirements for this installation.
    Thanks,
    RBM

    Here is sizing guide for Oracle Identity Manager
    http://www.oracle.com/technetwork/middleware/id-mgmt/oim11g-sizingguide-194346.pdf
    You can use it as a guideline, and it refers to 25000 users similar to your requirement. There are other factors also consider like, failover, performance etc. Feel free to reach out if you need more info [email protected]

  • Can we install Oracle 8i and 10g on the same windows server?

    I would like to install the Oracle server 8i and 10g on the same windows server? Is this possible.
    Forgive me if this question is already asked.
    Thanks in advance!
    Jay.

    WHICH Windows version? (There's more than one). It would be useful to be a little bit more precise (NT,2000,XP,2003, 32/64 bit) .
    For NT and 2000 it is possible to have both 8i and 10g, for XP and 2003 there's no support for 8i at all.

  • Internal and External Portals be hosted & Configured on Same Portal server?

    Hi Experts,
    Is it possible to host and configure the Internal portal and External Portal on the same portal server?
    If yes, kindly provide the inputs.
    We have a scenario wherein we have to use the same portal server for both kinds of users (Internal as well as External).
    We want to provide separate URLs for both the portals and the datasource for the users management would be different for both the scenarios.
    The user managemnet in case of Internal Portal has to be authenticated to an AD server whereas in case of External Portal the user management would be taken care by UME.
    Please suggest and share some docs if possible.
    Thanks & Regards,
    Anurag

    Hi,
    Can we customise the Portal logon page for both the portals differently?
    I've already customised the portal logon page by modifying the UME properties in the Config Tool but that was done keeping in mind the External Portal users. Now, we want to customise the page for Intranet users but with different options at the logon page.
    How can we achieve this functionality as any property that we modify in either VA or Config Tool will affect both types of portal pages.
    For an eg. we have a Self Registration link for the external users which we do not want for the Intranet users. How is this possible?
    If we design a webdynpro java application for the logon page and for authentication purpose, can we call a home page iview on successful authentication?
    And with this customised webdynpro java application, can we connect to the AD server for the user authentication?
    Best Regards,
    Anurag

Maybe you are looking for