Iframe and pl/sql

I want to know if it is possible to have my portlet contents display in an iframe in order to implement a scrollbar, but all my portlets are pl/sql packages. Will this be possible?

The opening <PRE> and closing </PRE> tags are not needed, just wanted to make sure that the HTML tags are not processed...
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Peter Moskovits ([email protected]):
Sorry, I thought the question is more theoretic. Add an HTML portlet to your page, and enter the iframe tag (Edit defaults).
<PRE>
<IFRAME WIDTH="100%" HEIGHT="300" SRC="http://<host>:<port>/pls/<DAD>/<schema>.<package>.<procedure>"></IFRAME>
</PRE>
Hope this helps.
Peter<HR></BLOCKQUOTE>
null

Similar Messages

Real Time Report Placed in iFrame and then Within a Web Applet

Real-Time Reports built and executed BI tool retrieve real-time updates. However, when report URL is placed within an IFRAME and that is then placed in a Web Applet and the Web Applet is placed within a Page Layout Section, the real-time report no longer retrieves real-time updates.
Do you have any ideas as to why?

Hi Don,
Thanks for the reply. I had downloaded a set of samples from SAP and I have looked through a few of the set you supplied. I am worried that I'm going to have some trouble because the samples have the reports loaded as part of the solution but I was looking to create a more generic viewer. I don't want to have to reprogram for each and every report that is created. That is why I was trying to use the generic parameter dialog. After the Report Load Failed dialog comes up, it does bring up the parm dialog and hits SQL Server just fine. Yes...the reports are passing Parms to Stored Procs in SQL Server. The report has default parameter values.
What I am trying to do is search thru the application folder and gather the names of the reports located there and fill the combo box with the names of the reports. Then the user should just be able to select a report and run it. I can't save the data in the reports because they must be ran per the requester's date range and other desired parameters.
Does this seem valid or am I going to have to program for EVERY single report and reprogram/recompile for every report added? Not particularly what I want to hear. I would have used the standard Crystal Report Viewer and had the users use that but it doesn't seem to allow you refresh the data from the viewer.
Thanks for your help,
Chris

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

What is the diffrence between package javax.sql and java.sql

Is javax designed for J2EE?
And when to use package javax?

Hi,
What is the diffrence between package javax.sql and java.sql?The JDBC 2.0 & above API is comprised of two packages:
1.The java.sql package and
2.The javax.sql package.
java.sql provides features mostly related to client
side database functionalities where as the javax.sql
package, which adds server-side capabilities.
You automatically get both packages when you download the JavaTM 2 Platform, Standard Edition, Version 1.4 (J2SETM) or the JavaTM 2, Platform Enterprise Edition, Version 1.3 (J2EETM).
For further information on this please visit our website at http://java.sun.com/j2se/1.3/docs/guide/jdbc/index.html
Hope this helps.
Good Luck.
Gayam.Srinivasa Reddy
Developer Technical Support
Sun Micro Systems
http://www.sun.com/developers/support/

Difference between Static SQL Query and Dynamic SQL Query.

Hi,
Please explain the basic difference between static and dynamic sql queries. Please explain with example.

Static: http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10472/static.htm
Dynamic: http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10472/dynamic.htm

Pivot and dynamic SQL

Hi Team,
I need to write a SQL to cater the requirements. Below is my requirements:
pagename fieldname fieldvalue account_number consumerID
AFAccountUpdate ArrangementsBroken dfsdff 1234 1234
AFAccountUpdate ArrangementsBroken1 dfsdff 1234 1234
AFAccountUpdate ArrangementsBroken2 dfsdff 1234 1234
AFAccountUpdate ArrangementsBroken2 dfsdff 12345 12345
AFAccountUpdate ArrangementsBroken1 addf 12345 12345
Create table test_pivot_dynamic
pagename varchar(200),
fieldname Varchar(200),
fieldvalue varchar(500),
N9_Router_Account_Number bigint,
TC_Debt_Item_Reference bigint
--Input
insert into test_pivot_dynamic Values('AFAccountUpdate','ArrangementsBroken','addf',1234,1234)
insert into test_pivot_dynamic Values('AFAccountUpdate','ArrangementsBroken1','dfsdff',1234,1234)
insert into test_pivot_dynamic Values('AFAccountUpdate','ArrangementsBroken2','fder',1234,1234)
insert into test_pivot_dynamic Values('AFAccountUpdate','ArrangementsBroken2','dfdfs',12345,12345)
insert into test_pivot_dynamic Values('AFAccountUpdate','ArrangementsBroken1','dfdwe',12345,12345)
insert into test_pivot_dynamic Values('AFAccountUpdate1','Arrangements','addf',1234,1234)
insert into test_pivot_dynamic Values('AFAccountUpdate1','Test1','dfsdff',1234,1234)
--Expected output:
Select 1234,1234,'AFAccountUpdate','ArrangementsBroken','addf','ArrangementsBroken1','dfsdff','ArrangementsBroken2','fder','ArrangementsBroken2','fder'
Select 12345,12345,'AFAccountUpdate','ArrangementsBroken','addf','ArrangementsBroken1','dfdwe','ArrangementsBroken2','dfdfs'
Select 1234,1234,'AFAccountUpdate1','Arrangements','addf','Test1','dfsdff'
so basically we have to pivot and dynamic sql and insert the expected output to a common table which will have all the required fields
Thanks,Ram.
Please don't forget to Marked as Answer if my post solved your problem and use Vote As Helpful if a post was useful. It will helpful to other users.

This should give you what you're looking for
SELECT N9_Router_Account_Number,TC_Debt_Item_Reference,PageName,
MAX(CASE WHEN SEQ = 1 THEN fieldname END) AS fieldname1,
MAX(CASE WHEN SEQ = 1 THEN fieldvalue END) AS fieldvalue1,
MAX(CASE WHEN SEQ = 2 THEN fieldname END) AS fieldname2,
MAX(CASE WHEN SEQ = 2 THEN fieldvalue END) AS fieldvalue2,
MAX(CASE WHEN SEQ = 3 THEN fieldname END) AS fieldname3,
MAX(CASE WHEN SEQ = 3 THEN fieldvalue END) AS fieldvalue3,
MAX(CASE WHEN SEQ = 4 THEN fieldname END) AS fieldname4,
MAX(CASE WHEN SEQ = 4 THEN fieldvalue END) AS fieldvalue4
FROM
SELECT *,ROW_NUMBER() OVER (PARTITION BY N9_Router_Account_Number,TC_Debt_Item_Reference,PageName ORDER BY PageName) AS SEQ,*
FROM test_pivot_dynamic
)t
GROUP BY N9_Router_Account_Number,TC_Debt_Item_Reference,PageName
To make it dynamic see
http://www.beyondrelational.com/modules/2/blogs/70/posts/10791/dynamic-crosstab-with-multiple-pivot-columns.aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Problem with provisioning and external SQL server connection

I am configuring IPAM 2012 R2 on a our management server. Completed the first step by enabling the feature. No issues.
Now I am on the Provisioning IPAM step. I get to the Configure Database step...
I choose Microsoft SQL server,
What should those values be in the Server name and Database name fields. Instructions show fqdn or ip address but that doesnt seem to be working for me.
I get the following error at the end of the Provisioning IPAM wizard,
IPAM Deployment failed with the following error.
Failed to connect to database server. Check the database name, connectivity and remote access.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)
You can restart this provisioning wizard from the IPAM overview page.
From the management server I have tested the SQL Connection with a udl file. I used myServer\myInstance and it works. It reports that I have made the Connection to the server and database with the sql credentials i have provided.
Thanks

Ran
into a problem with connecting to the DB on the SQL server from the IPAM server. The Dba and I checked the target SQL instance was enabled TCP and listening on a valid TCP port. SQL server was set to use port 1443 for incoming connections.
IPAM was set by default to use 1433.
Also used
netstat-n to identify issue and verified 1443 on SQL server was
being used. Made the correction under the IPAM provisioning wizard and connected to the database. Fixed.
Important note I was able to connect to the database with a .udlfile
without any issues
Also note that 2012 R2 IPAM only supports 2012 SQL Enterprise. Why?

Difference in behavior of sql and pl/sql after migrating from 9i to 11g

after migrating our database from oracle 9i to oracle11g, the developpers are worry that the behavior of the queries and pl/sql procedures/functions will change
example :
in 9i, select salary,count(*) from emp group by salary, it will display the rows sorted by salary
in 11gi, select salary,count(*) from emp group by salary, it will display the rows not sorted by default, we have to add the clause order by salary.
somebody could give the list of other difference in behavior (SQL and PL/SQL) agter migrating from 9i to 11g
Thanks a lot.

Tell your developers: garbage in - garbage out. In relational databases only ORDER BY ensures row order. If your developers relied on GROUP BY implemented by SORT and therefore returning ordered rows they had to realize code they wrote is Oracle release dependent and sooner or later code would require changes. And that "sooner or later" is now reality. In newer versions ORACLE can do GROUP BY via SORT or via HASH. And if it is done via HASH - don't expect ordered results. So tell your developers "payback time".
SY.

Query Engine report error with Crystal Report 9 And MS SQL SErver 2000

Hi,
Currently I m doing a report with Crystal Report 9 and MS SQL as back End.I used a stored procedure to fetch data from DB.The Stored procedure works properly with query analyzer . But when I take report through application
"Table Not Found" Error is coming.Later I Found that In stored procedure for certain conditions only this error comes.But I cant resolve it.
Can any One check any pblm with this query
ELSE IF ISNULL(@intSourceID,0) = 10 Or ISNULL(@intSourceID,0) = 11 Or ISNULL(@intSourceID,0) = 12 Or ISNULL(@intSourceID,0) = 13 Or ISNULL(@intSourceID,0) = 14
BEGIN
IF ISNULL(@intSchemeID,0) <> 0
BEGIN
Select* From table
END
ELSE IF ISNULL(@intSchemeID,0) = 0
BEGIN
Select
END
END
When I comment the above codes , report works fine....
Can any one help me....plz....I m in such a critical situation...

Hi,
Currently I m doing a report with Crystal Report 9 and MS SQL as back End.I used a stored procedure to fetch data from DB.The Stored procedure works properly with query analyzer . But when I take report through application
"Table Not Found" Error is coming.Later I Found that In stored procedure for certain conditions only this error comes.But I cant resolve it.
Can any One check any pblm with this query
ELSE IF ISNULL(@intSourceID,0) = 10 Or ISNULL(@intSourceID,0) = 11 Or ISNULL(@intSourceID,0) = 12 Or ISNULL(@intSourceID,0) = 13 Or ISNULL(@intSourceID,0) = 14
BEGIN
IF ISNULL(@intSchemeID,0) <> 0
BEGIN
Select* From table
END
ELSE IF ISNULL(@intSchemeID,0) = 0
BEGIN
Select
END
END
When I comment the above codes , report works fine....
Can any one help me....plz....I m in such a critical situation...
Refer the above statement highlighted in BOLD. That statement is WRONG. Select what ???? Try any one of the below statement,
select ''
--or
select 0
--or
select null
Regards, RSingh

When I try to load a pdf in iframe and I disable PDF toolbar, Its working fine in Internet Explorer and lower versions of Firefox, but in Firefox 19 its not

When I try to load a PDF inside Iframe and I disable toolar=0 (as guided by adobe). I am able to see the iframe with PDF with no toolbar in IE and lower versions of Firefox (till version 14).
But in my current version 29, The PDF is visible with toolbar on top.
Can you please let me know the way to display pdf with no toolbar in Firefox 29?

I replied on your similar question here: https://support.mozilla.org/questions/1005225

After restoring SharePoint farm backup ( The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connection)

Hi,
I have taken farm back and restore it in new UAT environment, while access to the main site getting the below error:
Error
An unexpected error has occurred.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 866476f3-23dd-4e1e-97af-bffc62cc2d57
Date and Time: 7/15/2014 11:26:35 AM
When i checked in log i got below error
System.Data.SqlClient.SqlException: A network-related or instance-specific
error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40
- Could not open a connection to SQL Server) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj) at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecu...
Thanks in advance
Said Al Balushi

Hi Wendy,
i have checked all below points, every thing is fine but still i am getting the same error.
Check SQL services are runing
Check remote conenctions are enabled
Check SQL Browser service is runing
Check TCP/IP protocal enabled at SQL server
Check out windows firewall setting
Thanks,
Said

SQL Server Agent Log showing errors [298] SQLServer Error: 10061, A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL

Hi All,
I have started receiving this error in the logs for the last 10 days and the Schedules Jobs for the database have stopped running. My MS CRM application is working fine.
Can anyone guide me what could be the problem.
Date                      17/4/2014 2:04:20 PM
Log                         SQL Server Agent (Current - 17/4/2014 2:01:00 PM)
Message
[298] SQLServer Error: 10061,
A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct
and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online. [SQLSTATE 08001]
Date                      17/4/2014 2:11:55 PM
Log                         SQL Server Agent (Current - 17/4/2014 2:01:00 PM)
Message
[298] SQLServer Error: 10061,
A network-related or instance-specific error
has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information
see SQL Server Books Online. [SQLSTATE 08001]
Date                      7/4/2014 11:00:31 AM
Log                         SQL Server Agent (Current - 17/4/2014 2:01:00 PM)
Message
[298] SQLServer Error: 10061,
A network-related or instance-specific error
has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information
see SQL Server Books Online. [SQLSTATE 08001]

Check this link
http://social.msdn.microsoft.com/Forums/en-US/906da9b5-2482-468c-a424-ae099da2d96b/sql-server-agent-service-account-error?forum=sqlsetupandupgrade
Regards, RSingh

Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is

hi ,
when generate the schema , i got the below error, please any one put your inputs:
Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server
is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server).

thaks shanky,
but facing another , after generate schema from WCF_SQL, im unable get elements in my schema.
this is schema generate from storeprocduer , but thru WCF-sql im unable get the elements like
id, name
<xsd:schema targetNamespace="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:schema="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:sqltypes="http://schemas.microsoft.com/sqlserver/2004/sqltypes" elementFormDefault="qualified">
<xsd:import namespace="http://schemas.microsoft.com/sqlserver/2004/sqltypes" schemaLocation="http://schemas.microsoft.com/sqlserver/2004/sqltypes/sqltypes.xsd" />
<xsd:element name="Test.dbo.sample">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="id" type="sqltypes:int" minOccurs="0" />
<xsd:element name="name" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="1000" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>19</id>
<name>sw</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>14</id>
<name>swe</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>13</id>
<name>se</name>
</Test.dbo.sample>

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The
server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26- Error:Locating Server\instance Specified)
How Can i solve this?

1. Make sure SQL Server Service is running
2. If a named instance, make sure SQL Server browser service is running
3. Make sure SQL Server is configured to allow remote connections
4. Examine the SQL Server error log for messages confirming that SQL is listening on the expected network interfaces and ports
5. Test server connectivity with PING from the client machine
6. Test port connectivity using TELNET or PowerShell to the server and port (from step 4) from the client machine. For example
a. TELNET <server-name> 1433
b. PowerShell: 1433 | % { echo ((new-object Net.Sockets.TcpClient).Connect("YourServerName",$_)) "server listening on TCP port $_" }
7. Check firewall settings if step 5 or 6 connectivity test fails
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Java and MS SQL Server 2000 problem, please help

please help me. I am using java and MS SQL Server 2000, and I'm trying to access and verify the login. I'm getting the following error message: [Microsoft][ODBC SQL Server Driver]Invalid Descriptor Index
Can any please help in this regard.
String userNumber = (String)userNumField.getValue();
char[] userPasswordArray = userPasswordField.getPassword();
String userPassword = new String(userPasswordArray);
     try {
            Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
            java.sql.Connection connection = java.sql.DriverManager.getConnection("jdbc:odbc:Dikolobe_Data");
            java.sql.PreparedStatement statement = connection.prepareStatement(
                    "SELECT USER_NUMBER, USER_PASSWORD, USER_CLASS, USER_STATUS " +
                    "FROM SYS_USER " +
                    "WHERE (USER_NUMBER = ? AND USER_PASSWORD = ?);");
            statement.setString(1, userNumber);
            statement.setString(2, userPassword);
            java.sql.ResultSet result = statement.executeQuery();
            if(result.next()) {
                String userStatus = result.getString(4);
                if(userStatus.equals("logged on")) {
                    String loginErrorMessage = "User with number: " + userNumber + " is already logged on.";
                    javax.swing.JOptionPane loginErrorPane = getNarrowOptionPane(72);
                    loginErrorPane.setMessage(loginErrorMessage);
                    loginErrorPane.setMessageType(javax.swing.JOptionPane.ERROR_MESSAGE);
                    javax.swing.JDialog loginErrorDialog = loginErrorPane.createDialog(null, "Login Error");
                    loginErrorDialog.setVisible(true);
                else {
                    String userClassification = result.getString(3);
                    if(userClassification.equals("Administrator")) {
                        AdminHomePage newAdminHomePage = new AdminHomePage();
                        newAdminHomePage.setVisible(true);
                    else if(userClassification.equals("Educator")) {
                        EduHomePage newEduHomePage = new EduHomePage();
                        newEduHomePage.setVisible(true);
                    statement = connection.prepareStatement(
                            "UPDATE SYS_USER SET USER_STATUS = ? " +
                            "WHERE USER_NUMBER = ?");
                    statement.setString(1, "logged on");
                    statement.setString(2, userNumber);
                    statement.executeUpdate();
                    dispose();
            }

Doesn't the following link give you enough information?
http://www.google.com/search?q=invalid+descriptor+index
Anyway .. This error means that the given ResultSet column index which you're trying to retrieve the value from is out of the range.

Iframe and pl/sql

Similar Messages

Maybe you are looking for