IIS 6 and CF MX 7 on separate boxes

Is it possible to have ISS6 on one box and CF MX 7 on another
box?
If yes, how do you map iis6 to ddl file on CFMX7 box?

Distributed Mode is what you are after.
http://www.adobe.com/support/coldfusion/administration/cfmx_in_distributed_mode/
Although written a few years ago, it'll still point you in
the right direction.
Andy

Similar Messages

My husband and I share a new PC. We have different music tastes and each have an iphone. How can we both use our one computer and one itunes program with separate music libraries and separate iphones?

My husband and I share a new PC. We have different music tastes and each have an iphone. How can we both use our one computer and one itunes program with separate music libraries and separate iphones?

Each device only syncs waht you select.
Select only what you want for each phone.

HT3819 If I have to load the same apple id on all devices to use home share, does that preclude each device from using a second apple id and does that constitute a separate Itunes db or something?

If I have to load the same apple id on all devices to use home share, does that preclude each device from using a second apple id and does that constitute a separate Itunes db or something?

Welcome to the Apple community.
Only one of your libraries needs to use your iTunes Store Apple ID for home sharing. Your other computers can use their own ID for iTunes, so long as they use the same ID as all of the devices on the network for home sharing.

How To: Use Visual Studio, IIS Express, and Adobe Edge Inspect to view local projects

You CAN view a Visual Studio project with Adobe Inspect. The work around takes a little bit of time.
This involves using IIS Express to run your Visual Studio project, which is mainly a setting in Visual Studio, a Firewall change, a few command line and IIS Express config change. It isn't actually all that bad, but will make your life A LOT easier.
Here are the steps. (Note these are steps I used for Visual Studio 2012 and your project is part of a solution project. Windows 7 or Windows 8)
1. If IIS in not turned on, turn it on.How to: Enable Internet Information Services (IIS) - this should install IIS Express as well.
2. In Visual Studio, find the port that Visual Studio will be using for your project by Running your web project (Debug), and note/write down/save the port number that shows up in the browser when the project launches. (ex. http://localhost:12345)
3. Add a NetShare Reservation (process for this will be different for Windows XP)
Go to your Command Line (CMD) in Windows and in c:\Windows\system32> type in
netsh http add urlacl url=http://yourIPaddress:yourPortNumber user=everyone
(ex. netsh add urlacl url=http://12.34.56.78:12345 user=everyone)
Hit Enter key. You should be a successful add reservation message
3. Go to your Windows Explorer (File system) and go to c:/Users/YourName/MyDocuments (or Documents)/IISExpress/config/ and open 'applicationhost.config'
In the 'applicationhost.config' file find your site in the <sites> section.
Example:
<sites>
<site name="WebSite1" id="1" serverAutoStart="true">
                <application path="/">
                    <virtualDirectory path="/" physicalPath="C:\MyProjects\TestSite" />
                </application>
                <bindings>
                    <binding protocol="http" bindingInformation=":12345:localhost" />
                </bindings>
            </site>
</sites>
In this section ADD 2 new lines to the <bindings> section. Note add your own IP address and your own Computer Name
<binding protocol="http" bindingInformation="*:12345:12.34.56.78" />
<binding protocol="http" bindingInformation=":12345:MyComputerName" />
Save the config file.
4. Open up your Windows Firewall and go to 'Advanced Settings'. Here you want to create an Inbound Rule.
Right click on Inbound Rule and select New Rule
- Rule Type select 'Custom'
- Program leave this
- Protocol and Ports > Protocol Type select 'TCP' then Local Port select 'Specific Port' and fill in the port number you got from VS. Leave Remote Port alone.
- Scope
There are a few ways of doing this. Typically you would go the the Remote IP address and select 'These IP addresses: and select ADD > select 'Predefined set of computers' and choose Local Subnet. IF this does not work leave Remote IP addresses > Any IP address option selected instead.
- Action leave this
- Profile select Domain and Private
- Name put IISExpressWeb for the name
Select 'Finish'
5. Go to Visual Studio. (Note if you have multiple projects in your solution, choose your start up project. Right click on your project in Solution Explorer in VS and select 'Set as Start Up Project' )
Right click on your start up project again and you should see an option to 'Use IISExpress'
In the DEBUG dropdown (from the main menu bar at the top) select 'YourProjectName Properties'. Mine was the last one in the list with a wrench icon next to it.
This should open an new tab in your project, You should see a left hand list of option and a right hand column of options.
In the left column select 'Web' and in this tab select Use Local IIS Web server and select 'Use IIS Express' and type in your IP Address and port number (same as before) in the Project Url text box.
Save.
NOW, you should be able to run your project in Visual Studio and use Adobe Edge Inspect on your device and view new results in Chrome. You can develop from there.
If you still can not see it working, please be sure your device is on the same SubNet or Wireless network as your computer. If you are in a large network but the domains can still see each other, the Firewall Setting detailed above to allow Any IP Address in your Scope section.

Hi CMosqueda,
Thank you for taking time to share this information with other users.
Thanks,
Preran

Hi, can anyone tell me if I can have more than one iTunes account on the same PC. I've just bought my wife an iPad2 and want to create a separate account for her. Can I do that on the same PC as mine?

Hi, can anyone tell me if I can have more than one iTunes account on the same PC. I've just bought my wife an iPad2 and want to create a separate account for her. Can I do that on the same PC as mine? Thanks.

I would advise that you not set up a second Apple ID. It's really not necessary - having two Apple IDs won't affect how iTunes works with your iPads - and will just complicate matters. Each iPad will be treated independently and can be set to sync only the items you want on that particular iPad. If you really want to keep the two iPads separate, set up different iTunes libraries and have only those items you want on the related iPad in that library, rather than a different Apple ID. If you plan not to use a computer and just download directly to the iPads, you can again choose what apps and content each iPad gets.
But answering your specific question, you can have content from up to five iTunes Store accounts on any one computer or iPad. To create a new iTunes Store account, you'll need a different email address, and from there you just create the account the same way you did the first one.
Regards.

Can I create a separate icloud account for my husband but still use the same itunes account? I want our contacts, photos and storage capacity to be separate but be able to share music and apps we purchase.

can I create a separate icloud account for my husband but still use the same itunes account? I want our contacts, photos and storage capacity to be separate but be able to share music and apps we purchase.

Welcome to the Apple community Pammy.
Yes, that's exactly what I'd suggest for the vast majority of users.

Both myself and my wife have 2 separate iTunes accounts, I subscribe to iTunes Match. Music purchased on my wife's account appear on our computers iTunes library but my iPad cannot access the music she has purchased. Is there any way to overcome this

Both myself and my wife have 2 separate iTunes accounts, I subscribe to iTunes Match. Music purchased on my wife's account appear on our computer iTunes library but my iPad cannot access the music she has purchased. Is there any way to overcome this

The only way to do what you want is to log into your wife's iTunes Store account on your iPad. Doing this will lock you out of your account for 90 days.

I will be working on a project to migrate from Sybase ASE (15.7) to SQL Server 2014 using Oracle golden gate........I am trying to find documentation which can guide me to use a separate box installation of OGG and how to configure it for Sybase and SQL s

Hi,
I need guide to install OGG on a separate box which will help me to migrate Sybase to SQL server.
Viral Dave

hi - just an fyi
we have SQL Server 2012 and from my reads and understanding OGG supports SQL Server up to 2008. not to say it wouldn't work on higher versions if installed. in the link above check out the SQL Server installation chapter. before purchasing the license I would contact Oracle.
maybe someone here has installed it on a higher version and got it to work. we are currently working on setting up OGG to work on Oracle to Oracle servers.

I have the Creative suite 6 premium teacher edition installed on a mac and I want to install Premiere Pro and Photoshop ONLY on a separate macbook. How do i do this?

I have the Creative suite 6 premium teacher edition installed on a mac and I want to install Premiere Pro and Photoshop ONLY on a separate macbook. How do i do this?

Get the CS6 installation file and when you run it on the separate machine choose to install only the programs you wish it to have.
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

Some recipients receive my images attached to emails, some find they are embedded and difficult to impossible to separate. Just found out that if I remove my attached signature, the problem goes away. How to send images signature reliably?

Some recipients receive my images attached to emails, some find they are embedded and difficult to impossible to separate. Just found out that if I remove my attached signature, the problem goes away. How to send images plus signature reliably?

When you attach things, make sure to check the box that says [√] Send Windows-Friendly attachments

I have 2 ipods on one id and want to change to separate ids

I have 2 ipods on one id (mine and my sons) and want to change to separate ids as fed up of listening to his music can this be done?

No reason for a different ID. Just do not sync his music. Also in Settings>iTunes and App Store make sure that Automatic Downloads are turned OFF
How to use multiple iPods, iPads, or iPhones with one computer

In my email all the messages from one person bunch together and I would like to separate them. I have done this before on my iPhone but just recently got an iPad and its doing it on this, so does anyone have any ideas how to fix this issue?

In my email all the messages from one person bunch together and I would like to separate them. I have done this before on my iPhone but just recently got an iPad and its doing it on this, so does anyone have any ideas how to fix this issue?

Settings >> Mail, Contacts. Calendars >> Organise by Thread. Switch to OFF to see every individual email in the Inbox.

Is it possible to take the CDR data from a v4.2 Call Manager and copy it to a separate server where it would be made available for reporting?

Is it possible to take the CDR data from a v4.2 Call Manager and copy it to a separate server where it would be made available for reporting? We are not interested in migrating the CDR data to v6 because of the concerns it introduces to the upgrade process. Is it possible to get the raw data and somehow serve it from a different machine? (knowing it would be 'old' data that stops as of a certain date). If so, what would be the complexity involved in doing so?
It seems like the CDR data lives within MSSQL and the reporting interface is within the web server portion of the Call Manager... that's as far as we've dug so far.

Hi
It is absolutely possible to get the data - anyone you have in your org with basic SQL skills can move the data off to a standalone SQL server. This could be done most simply by backing up and restoring the DB using SQL Enterprise Manager.
Moving the CAR/ART reporting tool would be more difficult... if you do actually use that for reporting (most people find it doesn't do what they need and don't use it for anything but basic troubleshooting, and get a third party package) then the best option may be to keep your publisher (possibly assigning it a new IP) and leave it running for as long as you need reporting.
You would then need a new server to run your upgraded V6 CCM; you may find you need this anyway.
Regards
Aaron
Please rate helpful posts...

[svn] 1179: - added setup and storing settings in a separate file to facilitate updates .

Revision: 1179
Author: [email protected]
Date: 2008-04-10 11:58:03 -0700 (Thu, 10 Apr 2008)
Log Message:
- added setup and storing settings in a separate file to facilitate updates.
- fixed support for paths with spaces (i.e diffpack pack "c:/my documents/egeorgie/package")
- fixed to handle relative paths in the arguments
- fixed to create and include a .patch file in the package
- added readme.txt
Modified Paths:
flex/sdk/trunk/tools/diffpack/src/diffpack.mxml
Added Paths:
flex/sdk/trunk/tools/diffpack/diffpack
flex/sdk/trunk/tools/diffpack/diffpack.air
flex/sdk/trunk/tools/diffpack/readme.txt
Removed Paths:
flex/sdk/trunk/tools/diffpack/src/diffpack

Revision: 1179
Author: [email protected]
Date: 2008-04-10 11:58:03 -0700 (Thu, 10 Apr 2008)
Log Message:
- added setup and storing settings in a separate file to facilitate updates.
- fixed support for paths with spaces (i.e diffpack pack "c:/my documents/egeorgie/package")
- fixed to handle relative paths in the arguments
- fixed to create and include a .patch file in the package
- added readme.txt
Modified Paths:
flex/sdk/trunk/tools/diffpack/src/diffpack.mxml
Added Paths:
flex/sdk/trunk/tools/diffpack/diffpack
flex/sdk/trunk/tools/diffpack/diffpack.air
flex/sdk/trunk/tools/diffpack/readme.txt
Removed Paths:
flex/sdk/trunk/tools/diffpack/src/diffpack

BO MOBI with BOE and Mobile server on two separate servers

Hi Experts,
We need to set up a BO MOBI with BOE and Mobile server on two separate servers.
In such a configuration, how does the two servers communicate?
What should be the VAS and VMS server configurations? especially the external hostnames in the files?
We are looking for a non Blackberry(proxy) deployment.
We have installed the software,however the windows services of Authserver and the Job servers are not available in the mobile server instance
Any help would be highly appreciated.

Hi Experts,
We need to set up a BO MOBI with BOE and Mobile server on two separate servers.
In such a configuration, how does the two servers communicate?
What should be the VAS and VMS server configurations? especially the external hostnames in the files?
We are looking for a non Blackberry(proxy) deployment.
We have installed the software,however the windows services of Authserver and the Job servers are not available in the mobile server instance
Any help would be highly appreciated.

IIS 6 and CF MX 7 on separate boxes

Similar Messages

Maybe you are looking for