Iis 7 2008r2. DNS amplification attacks, please correct your configuration
How can I configure my server not to allow DNS amplification attacks?
openresolver dot com shows open recursive resolver on all my ip addresses
i don't find any dns server installed on my server so how can my iis 7 be exploitable when there is no dns server installed?
There is no DNS in my Start, Administrative Tools menu tree
There is no DNS Manager in services. There is only DNS client
Add Roles Wizard Shows DNS server is not yet installed. It says I could install it.
there is no named.conf file on the hard drive
so I can't make this entry when the named.conf file doesn't exist
DNS service (named.conf):
Options {
allow-recursion {none;};
recursion no;
from command prompt run dnsmgmt.msc
[the result i got : not found]
There are 2 winsxs~dnsmgmt.msc files on the hard drive
When I open those I get a DNS manager GUI with an error message "MMC could not create the snap in"
This is the closest thing I can find to any evidence of existence of DNS server on the system in addition to the openresolver report
help sources i followed:
technet
~library/cc771738.~
~Forums~cant-find-dns-manager
1and1 sources:
~secure-server-against-dns-amplification-attacks
I'm not allowed to post full paths so I've written abbreviated paths above.
Hello,
This should be asked in Microsoft's IIS forums:
http://forums.iis.net/
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})
Similar Messages
-
Hello,everyone.
I am using virtex6 FPGA and trying to download mcs file to PROM and have failed.
I download .bit file to FPGA and succeed.
When i try to download .mcs file to PROM XCF128X-FTG64C(BPI Flash) and choose Slave SelectMAP Mode
and the process is about 68% it fails.
The message below the IMapct is as belows:
done.
PROGRESS_END - End Operation.
Elapsed time = 0 sec.
// *** BATCH CMD : identifyMPM
// *** BATCH CMD : assignFile -p 1 -file "C:/Users/Administrator/Desktop/TEST/LED/led.bit"
'1': Loading file 'C:/Users/Administrator/Desktop/TEST/LED/led.bit' ...
done.
INFO:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
UserID read from the bitstream file = 0xFFFFFFFF.
INFO:iMPACT:501 - '1': Added Device xc6vlx240t successfully.
INFO:iMPACT - Current time: 2014/3/13 8:48:14
// *** BATCH CMD : Program -p 1
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading: 2.997 V, Max. Reading: 2.997 V
1: VCCAUX Supply: Current Reading: 2.997 V, Max. Reading: 2.997 V
'1': Programming device...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:188 - '1': Programming completed successfully.
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
INFO:iMPACT - '1': Checking done pin....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time = 23 sec.
Selected part: XCF128X
// *** BATCH CMD : attachflash -position 1 -bpi "XCF128X"
// *** BATCH CMD : assignfiletoattachedflash -position 1 -file "C:/Users/Administrator/Desktop/TEST/LED/leda.mcs"
INFO:iMPACT - Current time: 2014/3/13 8:49:32
// *** BATCH CMD : Program -p 1 -dataWidth 16 -rs1 NONE -rs0 NONE -bpionly -e -v -loadfpga
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading: 2.997 V, Max. Reading: 2.997 V
1: VCCAUX Supply: Current Reading: 2.997 V, Max. Reading: 2.997 V
'1': BPI access core not detected. BPI access core will be downloaded to the device to enable operations.
INFO:iMPACT - Downloading core file D:/Xilinx/14.3/ISE_DS/ISE/virtex6/data/xc6vlx240t_jbpi.cor.
'1': Downloading core...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:2492 - '1': Completed downloading core to device.
Current cable speed is set to 6.000 Mhz.
Cable speed is default to 3Mhz or lower for BPI operations.
Current cable speed is set to 3.000 Mhz.
Setting Flash Control Pins ...
Setting Configuration Register ...
Populating BPI common flash interface ...
Common Flash Interface Information Query completed successfully.
INFO:iMPACT - Common Flash Interface Information from Device:
INFO:iMPACT - Verification string: 51 52 59
INFO:iMPACT - Manufacturer ID: 49
INFO:iMPACT - Vendor ID: 01
INFO:iMPACT - Device Code: 18
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Erasing device...
'1': Start address = 0x00000000, End address = 0x008CE03B.
done.
'1': Erasure completed successfully.
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
INFO:iMPACT - Using Word Programming.
'1': Programming Flash.
done.
Setting Flash Control Pins ...
'1': Flash Programming completed successfully.
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Reading device contents...
done.
'1': Verification completed.
Setting Flash Control Pins ...
Current cable speed is resumed to 6.000 Mhz.
'1': Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings.
`Elapsed time = 814 sec.
and i find many people have met the same thing. But they are spartan series FPGA and i try to low the Resistances of Mode pins,M0 M1 and M2, but the problem does not been solved.
I have read the status Registers and find there is an over-temperature state
and in Impact i could not readback the registers. It is strange.
I am anxious about this problem and have not solved it yet
What reasons may it be?
Hope for your answer, thank youHi~I want to know if you solve the configuration problem for virtex-6?
As I encounter the same configuration problem, I want to consult you with some question.
Can I have your email?
gszakacs wrote:
I have measured the VCCINT and find it is 1.0V, not 2.997V;
That is not at all surprising. I always assumed the problem is with reading the XADC (system monitor) block and not with the voltage or temperature.
my Reference board is ML605
That would have been nice to know at the beginning...
It seems that you have selected the correct mode, assuming your jumpers are set as required in the ML605 Hardware User's Guide. See table 1-27, table 1-33 and the note below it about switch S1.
I'm not that familiar with the details of this reference design, but it may be that the slave SelectMap circuitry requires a reset or power cycle to actually configure the FPGA. Have you tried power-cycling to see if the FPGA boots from the flash?
I'd also suggest that you select the V6 in the JTAG chain view, then go to the debug menu of Impact and select Read Device Status (this is from memory, but it's something like that). That will not only show the bits of the configuration status register, but also describe what each bit means. Among other things you can check the state of the FPGA's configuration logic and the Mode pins.
-
SAP: Please correct your help documentation
Dear SAP,
I'm writing this issue in this forum, because I don't know where to post this at all ...
In the help documentation to the ep6sp2 are a few 'errors' under the Admin -> System Admin -> System Landscape -> System Landscape Editor -> Editing System Properties -> Editing SAP R/3 System Properties.
You wrote
type
· Type of remote host
· Default value: 3
· Valid values: 1/31/21/E
First, what does 3 mean?
Second, is 3 a valid parameter? It is not listed under the valid values
r3referencesystem
· Property associated with user mapping
· The R/3 user name that is set in the ticket
· Default value: 0; the administrator configures one system and gives the same ticket to other systems; the system that appears in the User Mapping UI
· Valid values: 1/01/1
So your default value is again not to be seen in the valid values =8)
So it would be nice if you can correct this, I think the SAP System properties are an important task in the configuration of the portal....
Regards
RalphHello Ralph,
I think you should open a OSS Message with this topic.
Regards
Gregor -
Hello,
We recently changed to TFS as our bug tracking system and trying to understand how to change the existing states of Bug\Add new states. We installed TFS 2013 Update 4 and followed below process to change state values. For example, I would like to change
Bug State value of "Done" to "Closed",
1. witadmin exportwitd /collection:"http://MyServer:8080/tfs/DefaultCollection" /p:MyProject /n:Bug /f:C:\TFS\bug.xml
2. Replace all values of "Done" to Closed
3. witadmin importwitd /collection:"http://MyServer:8080/tfs/DefaultCollection" /p:MyProject /f:C:\TFS\bug.xml
Then we see below error in Work -> Backlog
TF400917: The current configuration is not valid for this feature. This feature cannot be used until you correct the configuration.
Learn about how to correct your configuration
Details about the validation error appear below:
The following element contains an error: RequirementBacklog/States. TF401098: This element defines the states for work items that appear on your backlog. The state configuration is incorrect. Each work item on this backlog must have one state with the type
'Complete'. The following work item type does not have any state with the type 'Complete': Bug.
The following element contains an error: BugWorkItems/BugWorkItems. TF400506: This element defines the states for work items that represent Bugs or Defects. Each state must exist in at least one of the work item types that are defined in: BugWorkItems.
The following states do not exist in any of the work item types: Done.
Tried export, made changes to ProcessConfig file for Bug states and imported. Still same issue.
Please suggest on how to proceed with customization of Bug states\values in TFS 2013 Update 4
Thanks,
AswiniHi Aswini,
Thanks for your reply.
I tested in on my Scrum 2013.4 team project, and found we need edit two places in processconfiguration.xml file, please try below:
<BugWorkItems category="Microsoft.BugCategory" pluralName="Bugs" singularName="Bug">
<States>
<State type="Proposed" value="New" />
<State type="Proposed" value="Approved" />
<State type="InProgress" value="Committed" />
<State type="Complete" value="Closed" />
</States>
</BugWorkItems>
<RequirementBacklog category="Microsoft.RequirementCategory" parent="Microsoft.FeatureCategory" pluralName="Backlog items" singularName="Backlog item">
<AddPanel>
<Fields>
<Field refname="System.Title" />
</Fields>
</AddPanel>
<Columns>
<Column width="100" refname="System.WorkItemType" />
<Column width="400" refname="System.Title" />
<Column width="100" refname="System.State" />
<Column width="50" refname="Microsoft.VSTS.Scheduling.Effort" />
<Column width="200" refname="System.IterationPath" />
<Column width="200" refname="System.Tags" />
</Columns>
<States>
<State type="Proposed" value="New" />
<State type="Proposed" value="Approved" />
<State type="InProgress" value="Committed" />
<State type="Complete" value="Closed" />
<State type="Complete" value="Done" />
</States>
</RequirementBacklog>
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi All
We are creating POs from interface program "Import Standard Purchase Order Program". Only for few of the POs, we are encountering the error 'Warning: An error occurred during tax calculation
. Please correct the problem or contact your system administrator.'
This error is happening for few PO's, other POs with same vendor, ship to and bill to location created successfully by the program
Any inputs on how to resolve this error is greatly appreciated.
Regards,
BrajeshHi Hussein,
Thank for the prompt response.
We have already applied the patch related to doc 1272684.1.
Below are the environment detail.
Database: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Application : 12.1.3
Diagnostic tool output :-
INTERFACE_
TRANSACTION_ID
INTERFACE_TYPE
COLUMN_NAME
PROCESSING_DATE
TABLE_NAME
ERROR_MESSAGE_NAME
ERROR_MESSAGE
100148
PO_DOCS_OPEN_INTERFACE
09-Aug-2013
PO_HEADERS_INTERFACE
PO_PDOI_TAX_CALCULATION_ERR
Warning: An error occurred during tax calculation. Please correct the problem or contact your system administrator.
Log file :-
+---------------------------------------------------------------------------+
Purchasing: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
POXPOPDOI module: Import Standard Purchase Orders
+---------------------------------------------------------------------------+
Current system time is 09-AUG-2013 21:09:04
+---------------------------------------------------------------------------+
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
STANDARD
N
INCOMPLETE
12805
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
To get the log messages for PDOI, please use the following id to query against FND_LOG_MESSAGES table:
AUDSID = 12076063
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
69
+------------- 1) PRINT -------------+
Printing output file.
Request ID : 55116524
Number of copies : 0
Printer : noprint
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed successfully
Current system time is 09-AUG-2013 22:27:42
+---------------------------------------------------------------------------+
Brajesh -
XML page cannot be displayed cannot view XML input using XSL style sheet Please correct the error and then click the REfresh
Is the error message displayed in Firefox or in IE, or in a customized window that doesn't identify the browser?
''If it displays in Firefox:''
It's possible that the Troubleshooter doesn't work correctly unless IE is your default browser. You could test that possibility by having IE make itself the default and testing the Troubleshooter again.
''If it displays in IE or embedded in another Microsoft application:''
In a web search I found these suggestions:
(1) Reset your Internet Explorer settings, according to http://answers.microsoft.com/en-us/ie/forum/ie8-windows_7/cannot-view-xml-using-xsl-style-sheet/ccfe80c6-c0db-4594-a7e3-475f9eac0e85
(2) Try the System File Checker, according to http://ask-leo.com/why_do_i_get_the_xml_page_cannot_be_displayed_after_running_a_microsoft_troubleshooter.html
Any luck? -
Error in net price calculation, item 000010 (Please correct)
Hi
Can you tell me error and correction for the same ? It occurs during creation of Std.PO. whom RM1000 prcing procedure is assigned.
Error in net price calculation, item 000010 (Please correct)
Message no. 06213
Diagnosis
Possible causes:
o The net price is negative.
Check the prices and conditions entered.
o An error has occurred during currency translation.
Check whether the foreign currency is defined in the system.
o The unit of measure of an item is not allowed.
Check the units of measure entered.
o An internal error has occurred during the price determination
process.
A mandatory condition type is not defined in the system. Please
In the analysis under item details condition tab I got message 301 as Acess 0002 12 is missing.
Acess seq. 0002 is assigned to condition type PB00.I know this thread is very old but I had the same issue and found the solution.
Enter the SubTotal in the pricing scheme for condition P101 (in my Case 9 - Copy values to KOMP-BRTWR (gross value)).
Than it works for my case.
Hope this helps. -
Why icannot export pdf file from other app to ibook (after update today)?. Please correct my problem.
iPad 2, iOS 5.0.1Why icannot export pdf file from other app to ibook (after update today)?. Please correct my problem.
iPad 2, iOS 5.0.1 -
Hi,
I had purchased an iPhone 5 last month and got the OS updated to iOS 7, yesterday.
The data cable was of very bad quality and when I took it to the retailer for replacement, they said that its not covered under the one year warranty.
Secondly, I have also been experiencing network coverage issues with this phone. So, I decided to contact apple care through the web. When entering my serial number/IMEI it says, "We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. If your information is correct, you may need to contact us."
Does anybody have any idea what the reason behind this could be.
- First time with iPhone and frustrated.
BrijuIf you purchased the iPhone from Apple or an authorized Apple reseller,
contact them for assistance. If you purchased elsewhere, go back
to that retailer and get them to give you a new iPhone or your money
back.
If you have checked the serial number carefully and re-entered it
and that gave you the same error message, contact Apple if purchased
from Apple or authorized retailer; otherwise you have been scammed
and need to pursue the matter with the business you obtained the
iPhone from. -
G/L account 156116 cannot be used (please correct)
Dear all,
When i create a PO from a PR (of Third party sale process), i get an error:
G/L account 156116 cannot be used (please correct)
Message no. ME045
Diagnosis
Comparison of the field selection strings from the G/L account 156116 and the account assignment category X reveals that there is an incompatible combination of field selections for the field selection group 'CO/PP order'.
The G/L account field selection is stored in table T004F; that for the account assignment is stored in table T162K.
Pls give me your suggestion.
Thanks,> G/L account 156116 cannot be used (please correct)
> Message no. ME045
Go to FS00 and Select your Account and In Create / Bank / Interest Tab Double Click on Field Status group and Check the Business area Field is Set to Optional Entry. (If its set Dont Change any thing)
Now Go to OME9 and Select your Account Assignment X and Double Click and Check the Business area is set to Optional Entry. (If its Not Set then Change the Same and Save)
Logic is Both Business area Settings should be Same.
Regards,
Ashok -
Only on one page, the client is receiving this error:
Error - The operation could not be performed because the
file cant be accessed or doesnt exist. Please contact your web
developer to correct the problem.
I tested it with a couple different usernames and a couple different browsers and it works fine on my end.. but none the less it is happening to him. This is the second time it happened to two different clients.
??? Any ideas ??? Anyone else had this happen?Here's the setup on the two machines in particular...
Machine #1:
XP Pro
Was IE7, now latest FF
No antivirus
Firewall – Windows Firewall, Downloaded AVG free trial ver., but not installed
Machine #2:
XP Pro
IE7
Again, No AV… had Kaspersky… but uninstalled it
Windows Firewall
Maybe that could be of some assistance... not seeing anything that could possibly block or inhibit the ICE. Each machine is independent of the other, separate networks, different locations, JavaScript enabled, no cookie blockers, etc.
....STUMPED!!! -
I have a BTHub4 - My iMac, iPhone, and children's iPads all connect to the internet no problem. I cannot get my 2 MacBook Pros or my partners MacBook Air to connect. Have tried diagnostics - says to change DNS but it is correct. I have re-set both router and all laptops - no joy. They can all see the network but cannot connect.
This is extraordinary. I have moved the router and also tried resetting it to its factory strings. We have had this router for over a year and all our devices have always worked. Now all four laptops will not connect to the internet. Only one oMac and our phones and iPad.
I have had far more devices running at once before but now all laptops are timing out on connection. Some say this iIP address is already being used but if I manually set to a slightly different IP address it does not help, noir if I manually set to the correct IP address. Why would all our laptops (four) suddenly be unable to connect? -
61 062 & date comes after end of valid factory calendar. (Please correct)
Hi Experts,
I am Getting the Error in Creating Purchase Order:
Error Message No. 61 062 & date comes after end of valid factory calendar. (Please correct)
Please suggest.
Regards,
AshokI got a Solution For this. Actually User has Maintained Wrong Planned Delivery time in PIR for the Same it was Behaving like that.
Thanks -
Cannot view XML input using XSL style sheet. Please correct the error and..
Hi All,
Scenario XML to IDOC.
The interface determination decides whether to create IDOC X or IDOC Y based on a xml segment value.
I have an error in the SXMB_MONI:
<!-- Interface Determination
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="IF_DETERMINATION">CX_ID_PLSRV</SAP:Code>
<SAP:P1>Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160).</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when determining the inbound interface: Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Exception CX_SWF_RLS_OPERAND_MISSING occurred (program: CL_SWF_RLS_COMPARISON=========CP, include: CL_SWF_RLS_COMPARISON=========CM002, line: 63). Exception CX_SWF_RLS_OPERAND_MISSING occurred (program: SAPMSSY1, include: , line: 0). Exception CX_SWF_EXP_EVALUATE occurred (program: CL_SWF_EXP_EXPRESSION=========CP, include: CL_SWF_EXP_EXPRESSION=========CM027, line: 38). Exception CX_SWF_EXP_EXPRESSION occurred (program: CL_SWF_EXP_EXPRESSION=========CP, include: CL_SWF_EXP_EXPRESSION=========CM01Z, line: 520). Exception CX_SWF_EXP_EXPRESSION occurred (program: CL_SAI_SWF_RULE_ENGINE========CP, include: CL_SAI_SWF_RULE_ENGINE========CM00S, line: 42). Problem extracting values from the Payload: Check line 2 column 1 of the XML document</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
From the SXMB_MONI, the inbound message payload is truncated with an error:
- <ProductIdentification>
<GlobalProductIdentifier />
- <PartnerProductIdentification>
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
The following tags were not closed: Pip3B12ShippingOrderConfirmation, ShippingOrder, ShipmentLineItem, isContainsHazardousMa...
"> <GlobalPartnerClassificationCode />
<ProprietaryProductIdentifier>000000000000101369</ProprietaryProductIdentifier>
</PartnerProductIdentification>
</ProductIdentification>
- <QuantityInformation>
- <confirmedQuantity>
<ProductQuantity>1.00</ProductQuantity>
</confirmedQuantity>
I've checked that the xml format is OK.
As a matter of fact, if I try to resend the xml file from directory, the message is processed correctly and the payload shows all the xml file.
Thanks.
Daniele
Edited by: Daniele*Verdone on Feb 1, 2010 11:22 AM
Edited by: Daniele*Verdone on Feb 1, 2010 11:23 AMHi Suraj,
That option is not available in FTP mode..
This option is applicable only for the File adapter. If you enter a value in this field when configuring the sender FTP adapter, it will have no effect.
Yes, you're right !!
Are you sure that the message is not getting picked in half-way
Now, at this time, I can't see the XML data in the CC monitoring because the tool shows only the recent polling execute in the last 10 minutes. If the error recurs, I will check the payload of CC.
How can I solve the problem with reading incomplete file (FTP mode)?
...Meanwhile I will try with Full cache refresh.
Thanks
Daniele -
BT DNS again not working correctly
again BT DNS server not working correctly. Some of the websites not openig.
To get all you website opening you need to change the DNS settings.
I'm using opendns 208.67.222.222 and 208.67.220.220I reset all my pc, hub and open reach modem before I post here.
It's standard procedure I do when I have internet issues.
It wasn't working correct;y for about 45 min when I've change my DNS settings. Then I've checkied it again about 1h later, was still same.
When I checked it about 3h after initial broblem discovert it was all working fine.
Me and my frined we noticed that BT DNS server is playing up on regular basis 1-2 times a month.
Typical it's for about 20-30 min then is back to normal (unless it's like about 1h ago when it was f***ed for 2-3 days).
Maybe you are looking for
-
Good day, Our company uses EBS 11.5.10.2. The company has a policy whereby any new manual journal needs to have the supporting documentation attached to it, using the attachment icon in the task bar. Users sometimes forget to do this, though. This ha
-
Adobe service manager keeps crashing
Hi, always get the same erroe "adobe service manager stopped" working, on startup and every couple of minutes, while working with adobe applications. Problem is connected to ntdll.dll Windows 7 CS6ServiceManager.exe 3.0.1.46 4fe81e0b ntdll.dll 6.1.76
-
Confirm sales order with idoc ORDERS05
Hi everybody. I´d like to know if it´s possible to confirm a sales orders with idoc ORDERS05 and message type ORDCHG and posting FM IDOC_INPUT_ORDCHG_VMI. How would I have to fill the idoc data?? Thanks a lot
-
64 Bit installation, UFEI and Wifi error.
Hello, First post, here goes. PC Spec: CPU: i5-3570k GPU: Radeon HD7870 Mobo: Gigabyte Z77-DS3H Wireless card: TP-Link TL-WN7851ND (Ath9k) 4GB RAM 128Gb Sandisk Ultra SSD (this is the drive I wish to install too) 500gb HD 250GB HD First of all, i cha
-
Button functionality in a movieclip within another movieclip for another movieclip
Ok so i have this looping thumbnails bar that goes like this: Scene1-imagebar-imagebarinside The buttons symbols are in the "imagebarinside" movieclip and i am using this code: ss1.addEventListener(MouseEvent.CLICK, play1); function play1(event:Mouse