IiSight turns off immediately after connecting
Firewire connection OK
Camera is OK
When I connect the camera the green light turns on for a second or to then turns off.
When I open Ichat AV (3.1.5) /preferences/video I receive te message «Isight does not respond»
The problem is the same on my powerbook
Both nachine have system 10.4.7
Help!
Here are the specs for your Compaq Presario SR5280CF Desktop Computer. According to the specs, the computer came from the factory with a 300 watt power supply. Please read and follow the instructions in this HP support document entitled "Troubleshooting Power Supply Issues" for a possible resolution. Post back with the results of your troubleshooting efforts.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240
Similar Messages
-
Hi, I have an iPhone 4s running iOS 7.0.4 and the phone keeps going of whenver battery level drops to 20% and it give the warning. It turns off immediately after I dismiss the warning message. I LOCKED THE PHONE AT 21% and I was able to play music to 4% which means there is no problem with the battery, this seems to be a programming error.
Earlier suggestion include that the battery has a dead cell but it wouldnt keep playing music for over 2 hours it it had a dead cell.My issue with IOS 7.1 and higher is my Bluetooth for the phone still works...no problem but the music does not work with bluetooth...I have an Acura TSX 2010...Acura said there are no incidents reported, but me...I just upgraded to IPhone 6 and still no good....as soon as i hit the AUX button it say USB...not bluetooth...ugh
-
IPhone screen turns off immediately after a message is sent.
I am using an iPhone 5S (Running iOS 7.1.1) and whenever I send a message, as soon as my finger taps send, the "lock shutter" blacks out the screen and then unlocks itself after a few seconds. Anyone have any ideas?
Hey there 4cpukid,
It sounds like you are experiencing an issue where you tap Send in the Messages app and your phone unexpectedly goes to sleep. I would quit all the running apps on the device first:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that reset the phone and test the issue again:
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thank you for using Apple Support Communities.
All the very best,
Sterling -
5800 turns off immediately after pressing the call...
Hi guys had my XM about 8 months now and it's just started to turn off as soon as i attempt to make a call. It starts to make the call then just goes to black screen and off. Incoming calls and txts are working fine so it does not look like a hardware issue.
Any suggestions before i re-flash the **bleep**nagendranr24 wrote:
You can try soft reset.Dial *#7370# and enter lock code(12345 by default).
Further to this,
1. Do not forget to take a backup before doing this...
2. Use your set lock code if you have changed the default... -
MBP (early 2008) turns off immediately after startup
Machine was working great when I left work Friday. When I got into office Monday, noticed machine was extremely hot and in sleep mode.
Machine wouldn't wake up, so I powered it down and let it cool off.
Machine has cooled off but won't boot up - every time I try the light on the lid button lights up full brightness for a second, then goes dim, then goes out totally within a second.
From what I've seen through searching the forums, this could be a power supply issue. Any tips greatly suggested.Take a look at this knowledge base article on MagSafe first and rule that out.
Any of the items you list could be an issue. The best way to find out is a visit to an Apple genius bar where they can run some diagnostics and see where the problen is in the system. -
Can someone help me regarding my concern? It is a bit impossible for me to send back my iPod to where I bought it because I am already back in the Philippines. What are my other options considering that I live miles away from California already?
First, try the usual steps: restart, reset, restore.
http://support.apple.com/kb/HT1430
http://support.apple.com/kb/HT1414
If problems persist, call Apple Support at 1-800-1441-0234 or look for an authorized service center in your area:
http://www.apple.com/ph/service/
Regards. -
AppleScript to turn off Bluetooth after an hour of no usage
I'm interested in making an AppleScript that will turn off Bluetooth after a bluetooth device is not used for (let's say) one hour. The script should run only on battery life, not when the computer is plugged in.
Any ideas on how to start? Thanks.I don't think there's any way (at least easy way) to do this.
AppleScript is very good at initiating events, but not good at responding to them. As such it's not easy to write a script in this manner. About the only way to do this would be to have a stay-open script that periodically checks the list of connected devices and keeps track of when the last bluetooth device was used - however, there's a big difference between being 'used' and being 'connected'... you may have a bluetooth headset 'connected', but if you're not running any audio apps it might not be used, and that's hard to AppleScript to determine. -
MacBook Pro shuts off immediately after startup
My MacBook Pro shuts off immediately after I start it. It gets to the Apple logo on the grey screen and it shuts down. I have tried launching it in safe mode, resetting the NVRAM settings, nothing works.. Has anyone witnessed similar problems ? What can I do to fix this problem ? Help is gladly appreciated.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Mac Pro switches itself off immediately after power button is pressed on
Hi there,
I would like to share with you an ongoing problem of my Mac Pro (about on and off 11 month I think). Since its HD changed at the beginning of this year I've been having the problem of "switching itself off immediately after the power button is pressed on." I took it to Milton Keynes Apple Shop and apparently they couldn't replicate the problem I received it after they reset it's PRAM. Meanwhile I read the related posts and discussions about the problem and my assumption was as suggested in the scenarios of similar cause – Power Supply unit. I had a technical chat with ex-Solutions staff from Brighton, he also said it might have been caused by it.
I really don't know what to do because, sometimes attempting 10 or over times of pressing the button I hear the chime and literally 10 or 20 seconds later it switches itself off. And it happened this Sunday morning again, 8 times I've encountered the failure. And the most confusing thing is sometimes I leave it about an hour or two and then it just works and runs fine as it has never have happened.
By the way I left my computer on for a very long time I suspect maybe more than a month it was on sleep most of time when i am not using it. But yesterday I made the mistake of logging off and shutting it down. Now I can't turn my computer on. Highly frustrating and amazingly bizarre technical challenge.
Mind you I am fairly capable of carrying DIY operations on it. Previously I baked my graphics card as suggested in the forum – it works fine at the moment I am waiting until it completely brakes. But this power problem really really puzzles me.
Any opinions, how to solve this cause is highly appreciated.
Many thanks!
Specs:
Mac Pro 8 core
Xeon 5400 2nd Generation Early 2008
10 GB RAM
1 TB HDThe SMC especially on the very first 2-3 months of Early 2008.
Use to suffer from a "restart on wake from sleep" issue.
Some one told me that is not what "inrush current issue" is but that is what I (and couple others) called it.
Best to always have a workstation on 1500VA UPS.
Not share the outlet or cirucit even with anything major.
Yes it could I guess, poor phrase, but put more stress on PSU over time as a result also.
Methods to reset SMC have varied and changed over time. Thanks to web not all the revisions and older versions are kept online though to compare to.
Stories of people going on vacation etc for two weeks to come back to a "dead" Mac Pro started showing up in 2007.
If it had an actual SMC button, use that to reset.
If not, leaving it totally disconnected, and all external cables and such over-night, not for the mere 5-10 minutes.
Unplug but then press and hold power button for 8-10 seconds. And only once. And not to be done repeatedly. That was SMC Reset #3.
I know the 2007 8-core 3GHz had a different PSU than the smaller models.
2008 high end was 8-core 3.2GHz 5400 (stock was 2.8GHz 4 or 8-core)
FBDIMMs draw between 10W up to 15W each, so possible to have 8 DIMMs drawing 120W when maxed out. And heat. I always recommend Mac Pro use fan control to boost the fans a small 400 rpm to expel heat better and keep FBDIMM temps down. Heat, and temperature fluxuations stress and weaken components.
Other than AHT and the tools that a Apple Certified center should have, not much other than to swap out parts, monitor - iStatPro or Hardware Monitor -
And because of all this, I would setup a test system so you have a freshly formatted and installed OS and take it from there, with a better chance.
ATI 2600XT still? or upgraded? -
my screen just turned blank white randomly and now it won't turn off/reset or connect to a computer or really do anything... need help.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Some other users have had the same problem -
My macbook pro keyboard backlight won't turn off, even after pressing F5
my macbook pro keyboard backlight won't turn off, even after pressing F5
Try resetting the SMC http://support.apple.com/kb/ht3964
-
My iPhone 4 turns off (crashes) after accesing any apps, It work fine when plugged to charger (power supply). I tried all troubleshooting steps suggested by Apple but it doesn't work. I backed up my phone. I restored it several times. Even I re-installed iphone software. Also I restored it as a new iphone but doesn't work. What could be the problem and what are the availble solutions?
We can't know if there's a "fixture" because we can't examine your phone. But Apple can. Make a Genius Bar appointment and get your phone evaluated.
-
My ipod ejects itself, immediately after connecting with usb cable, before synchronizing could start. What’s wrong?
Have you tried plugging the iPod in with a different USB sync cable to verify the issue is not with the cable? It might not also hurt to connect it to another USB port as well.
Otherwise, try manually placing the iPod into Disk Mode and then connecting it to your PC.
Putting iPod into Disk Mode
B-rock -
My iphone 4 turns off automatically after screen lock
Hello guys,
my iphone 4 turns off automatically after screen lock, i have to press the POWER + HOME button during 10 secondes for reboot.
And it's like that every time i lock the screen.
Please can someone help me ?
thanks.Standard troubleshooting steps are reset, restore, restore as new.
Since resetting isn't working, try backing up and restoring through iTunes. -
I left my ipod touch at a friends house. She doesnt have internet. So it's not connected to the internet. And I had never charged it so it's been dead for about a week now. Can I use iCloud while it's turned off and not connected? Like, will it show a message and ring if it's not connected to the internet and turned on? Please help me ): I really need to find it!!!
" Can I use iCloud while it's turned off and not connected? "
No.
"Like, will it show a message and ring if it's not connected to the internet and turned on?"
No.
There is nothing you can do other than look for it,
Maybe you are looking for
-
Why wifi in Iphone 5 is always disconect???
wifi on my Iphone 5 is always disconet but is working perfect on Iphone 3.
-
Dear all pl give me the table & field where the customer name is saved Regards Kiran
-
Hello, I am running into some problems testing out a scenario using the test tool in the rwb that is supposed to do a simple map and write to a table using the JDBC adapter. The error I get in the message monitor are: Message Data - Error catagory: X
-
Transfer Function with CVI 5.0
Dear Sir/Madam, Let me first introduce myself. I am a Telecomunication Engineering student from Spain workimg on a project based on Labwindows/CVI and the data adquisitionscard PCI 6024E. In this project I have to calculate the transfer function of a
-
**Please reply to [email protected]** I want the documentation that explains how this example works, the link doesn't work on the page below. http://otn.oracle.com/products/reports/htdocs/getstart/examples/ParameterFormJSP/index.html also, when you t