IKEv2 Doesn't support Multiple Peers action to take

Hi,
I have to establish a tunnel from the local FW to a remote FW in L2L
In case of failure of the remote FW, a tunnel has to be opened with the backup remote FW.
I have proposed to use IKEv2
But with following config i get the message: %ASA-4-752009: IKEv2 Doesn't support Multiple Peers
crypto map local-map 30 set peer 22.22.22.22 33.33.33.33
So i have created two crypto maps:
crypto map local-map 30 set peer 22.22.22.22
crypto map local-map 40 set peer  33.33.33.33
The primary tunnel with peer 22.22.22.22 works fine  but with the backup tunnel with peer 33.33.33.33
The tunnel IPSEc is up  but no interesting traffic enters the tunnel:
#pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
#pkts decaps: 28, #pkts decrypt: 28, #pkts verify: 28
I have first taken a capture on the inside interface  and i see the counter of the access-list incrementing
but when i take a capture on the outside interface, i don't see any interesting traffic.
I have tried the clear crypto command but no way.
Equipment: Cluster of Cisco ASA 5510 at rel 8.4.7
Do i have to reboot the FW or may be the two crypto maps that i have created are not the good solution.
As an alternative if i want to maintain both peers on the same line i can replace IKEv2 by IKEv1.
Best regards.
Andre

Hello Andre, this is a confirmed issue with Cisco. There is an official bug listed as "ENH: Multiple Peers support for IKEv2 CSCud22276" (Cisco customer login required to view bug). See also the Cisco TAC Document "Migration of IKEv1 to IKEv2 L2L Tunnel" with the following quote:
"Multiple peers used for redundancy is not supported with IKEv2 on the ASA. In IKEv1, for redundancy purposes, one can have more than one peer under the same crypto map when you enter the set peer command. The first peer will be the primary and if it fails, the second peer will kick in. Refer to Cisco bug ID CSCud22276 (registered customers only) , ENH: Multiple Peers support for IKEv2."
Here's an excerpt from the Bug Enhancement Request regarding how to work around the issue.
"Either:
1) remove all but one peer from the crypto map
or
2) use IKEv1 instead of IKEv2"
Hopefully this helps, it would be a great feature for Cisco to add for better migration from IKEv1. I guess a more complicated alternative might be to use BGP and multiple WAN connections to have more than one valid path for the same WAN IP of your IPSec IKEv2 peer.

Similar Messages

  • Eclipse plugin doesn't support multiple build directories

    Eclipse 3.0 supports different build directories for each source tree.
    However, if you use this feature, the Kodo plugin doesn't work. It can't
    find the classes and puts ClassNotFoundException in the log and a
    meaningless NestableRuntimeException to the user with no indication of why.
    -joel

    Eclipse plugin currently available for Europa will not work with Ganymede.  A new version of Eclipse is being released very soon that is compatible with Ganymede.  It will be available on the Crystal Reports for Eclipse portal at http://www.sdn.sap.com

  • Photoshop CS6 CMS doesn't support multiple monitors system?

    There are two video cards (GTX560Ti) and two monitors separately connected to them in my system. With hardware calibration (MonacoOPTIX) I have two separate icc profiles for each monitor, being uploaded on Windows startup in their correspondent LUTs through Color managemet applet in Control Panel (Windows 7). That works properly.
    In my workflow routine I need Photoshop on monitor 2 (it's profile is acer2204.icm), but PS neither see nor use that profile, it uses the profile of another monitor (monitor 1, Benq.icm) only. Why? It's wrong. How can I make PS to use proper monitor profile? Is it possible? If not, then it is rather strange under Windows 7 improved color management features.
    http://s1.ipicture.ru/uploads/20120429/wYkrfTV8.jpg

    You seem to be confused about what Monitor RGB means. In your image you put a pointing arrow from Monitor RGB to the Custom color profile option as if you believe that those two options are connected. There is no connection between these two options. Choosing monitor RGB simply displays the images  in your monitor' color space without any color correction, in other words in effect this turns off the color management of  your monitor.
    If you go to Custom and choose the monitor profile of one of your monitors, this will give different result.
    If the "Preserve RGB numbers" is checked, this will result in the same effect as choosing Monitor RGB but will affect only one of your monitors - the one which is using the same color profile in the system - the other monitor, let's call it the second monitor, will try to simulate how the first monitor will display the color values if not converted.
    If the "Preserve RGB numbers"  is not checked, which is how you should use it most of the time, this will simulate on both monitors how the colors will look like if you convert from the currently used color space to the color space of one of your monitors.

  • Front Row doesn't support Compilations / Multiple Artists

    Frustrating but true - Front Row doesn't support multiple artists, so whilst you can view Various Artist albums in iTunes and on your iPod - you can't do it in Front Row. Pity - I just spent £600 buying an iMac SOLEY to use Front Row for a large music collection..... so please put me out of my misery. What am I doing wrong ?

    great!
    I found the same question and the SOLUTION in this forum. Thank you!.
    Pity that the Macbook Pro17 SPANISH manual just says "open the Front Row application" and not how to do (holding Comand-Esc).....
    Nice laptop though....
    Thanks again!

  • Exporting file to PowerPoint 'Object doesn't support this action'

    Hi -
    Client is using Nakisa 2.0 SP2
    When exporting an org chart to PowerPoint. 
    1. Hit 'export to PDF'
    2.Select radiobutton 'Powerpoint OrgChart Object'
    3.Pop up appears 'Object doesn't support this action' in browser
    4. additional information appears in Browser, see below. I have followed the instructions and still the problem persists.
    Any ideas? All help would be highly appreciated.
    Export To PowerPoint
    Compatibility
    We currently support:
    u2022     Microsoft PowerPoint 2000 / 2002
    u2022     Microsoft PowerPoint 2003
    Note: To ensure compatability, you may be prompted to install "Service Pack 6 for Visual Basic Runtime." If so, you must accept the installation and once installed it may ask for a system reboot which you may ignore.
    ActiveX Security
    Depending on your browser settings, you may be prompted to install 'Nakisa Office Components.cab'. This is our ActiveX component that will allow you to use our Exporting functionality.
    You may also be prompted to allow the ActiveX to run. If so, you must select 'Yes' to continue.
    Note: If you are not prompted and the export fails to occur, please verify your Microsoft Office installation and verify your browser's ActiveX settings are set to 'Enable' or 'Prompt'.

    Hi Thanks for your reply.
    This message I get in try to save  orgchart to ppt. I have not checked the log file, so will have a look tomorrow. This is the only pop up I get. any ideas

  • Video does not play: "Either windows doesn't support the item's file format......"

    Error message
    "Either windows doesn't support the item's file format or the content doesn't match the extension"
    I have both a Yoga and a Thinkpad 2. The Yoga is running Win 8 and the Thinkpad 2 has 8.1 Preview.
    I have copied multiple video files which are in either .avi or .mp4 containers.
    Some will play and some will not. I have installed all sorts of codec packages and players and the problem is the same. I though it might be a container problem so I tried to convert the file and the converter I used did not work.
    Searched the Internet and nothing really useful was found.
    Then I discovered a common thread. In the files that played, the codec information displayed when checking in properties and the ones that did not play, did not have the information.
    I have a video file on a USB flash drive and checked the properties and the information was there and I could play it from the flash drive. I copied it to my desktop and the file would not play. In checking, the codec information was not present.
    There seems to be an error in copying files where the requisite codec information is not being transferred.
    I have tried this multiple times and multiple permutations of transferring. Sometimes it will play from the desktop and will not play after transfer to the microSD card.
    Each time when it plays, the information is there and each time it does not play, the information is not there.
    Sal

    The problem is the period at the end. This system assumes it
    to be part of the url. I should have put a space and the end of the
    url before using a period to close the sentence. try this one:
    http://www.aaew.org/intro.swf
    http://www.scofieldministries.org/webtest/mv1.swf
    http://www.scofieldministries.org/webtest
    Please note that just the home page and supporting files have
    been loaded to the test server.
    Thanks,

  • Htc touch diamond doesn't support sensor API!!!!!!!!!!!!!!!!

    hi everyone,
    i decided to purchase htc touch diamond to start building some wonderful midlets!
    But something is wrong with me and my code and not with my mobile(I want to believe this!)
    I decided to get the properties from my mobile using these 2 lines :
    String m3g = System.getProperty("microedition.m3g.version");
    String sensor=System.getProperty("microedition.sensor.version");
    these two lines return two null Strings!!!as i read,if these two lines return null Strings means that the device doesn't support them!!!
    the whole code is:
    * To change this template, choose Tools | Templates
    * and open the template in the editor.
    import javax.microedition.midlet.*;
    import javax.microedition.lcdui.*;
    * @author LiTTle
    public class Midlet extends MIDlet {
    public void startApp()
    Display dis=Display.getDisplay(this);
    String m3g = System.getProperty("microedition.m3g.version");
    String sensor=System.getProperty("microedition.sensor.version");
    Form form=new Form("Supported");
    form.append("M3G: "+m3g);
    form.append("SENSOR: "+sensor);
    dis.setCurrent(form);
    public void pauseApp() {
    public void destroyApp(boolean unconditional) {
    please tell me that my code is wrong!I don't want to believe that i spent so much money for nothing!!!
    P.S. some weeks before i found out that this device doesn't support bluetooth api!!!
    thank you in advance all of you...

    Don't worry. I think I have worked out why. I called multiple
    loadMovie() to load multiple photos. That seemed to have cause the
    app to hang. I have now changed to method to loadClip() and load
    the photo one by one using OnLoadInit event. That solved the
    problem.

  • The driver doesn't support the version of ODBC

    Hi:
    We have been working with timesten client on a windows, we had not have any problem, the number of clients had not connect more than 80 clients, but today we connected 125 clients and we got this error directly to the client application.
    ERROR [08001] [TimesTen][TimesTen 7.0.1.0.0 CLIENT]Unable to connect to data source (DSN: SentraProdDSN; Network Address: 10.100.134.24; Port Number: 16003). ENOTSOCK: Invalid socket or socket closed.
    ERROR [01000] [Microsoft][ODBC Driver Manager] The driver doesn't support the version of ODBC behavior that the application requested (see SQLSetEnvAttr).
    But on the server error log the messages were:
    14:52:02.75 Err : SRV: 8974: EventID=5| Socket recv() failed. Error (131): Con
    nection reset by peer. File: /olympus/build/release_20070911/VisiChannel/oc/src/
    vostcpip.cpp; Line: 632
    14:52:02.75 Err : SRV: 8974: EventID=68| Failed to read request from client. Cl
    osing connection without reply.
    14:52:06.38 Err : SRV: 9078: EventID=5| Socket recv() failed. Error (131): Con
    nection reset by peer. File: /olympus/build/release_20070911/VisiChannel/oc/src/
    vostcpip.cpp; Line: 632
    14:52:06.38 Err : SRV: 9083: EventID=5| Socket recv() failed. Error (131): Con
    nection reset by peer. File: /olympus/build/release_20070911/VisiChannel/oc/src/
    vostcpip.cpp; Line: 632
    14:52:06.38 Err : SRV: 9078: EventID=68| Failed to read request from client. Cl
    osing connection without reply.
    14:52:06.38 Err : SRV: 9083: EventID=68| Failed to read request from client. Cl
    osing connection without reply.
    14:52:06.81 Err : SRV: 9116: EventID=3| Socket send() failed. Error (32): Brok
    en pipe. File: /olympus/build/release_20070911/VisiChannel/oc/src/vostcpip.cpp;
    Line: 728
    14:52:06.81 Err : SRV: 9116: EventID=5| Socket recv() failed. Error (131): Con
    nection reset by peer. File: /olympus/build/release_20070911/VisiChannel/oc/src/
    vostcpip.cpp; Line: 632
    14:52:06.81 Err : SRV: 9116: EventID=68| Failed to read request from client. Cl
    osing connection without reply.
    14:52:07.13 Err : SRV: 16186: EventID=5| Socket recv() failed. Error (146): Con
    nection refused. File: /olympus/build/release_20070911/VisiChannel/oc/src/vostcp
    ip.cpp; Line: 632
    14:52:07.57 Err : SRV: 16186: EventID=5| Socket recv() failed. Error (146): Con
    nection refused. File: /olympus/build/release_20070911/VisiChannel/oc/src/vostcp
    ip.cpp; Line: 632
    So we don't know if this error could happen because the number of connections were exceeded, but when this has happened the error messages is different.
    Let me tell you that the application client was developed using C#. So could it be that the C# on .NET could have a instruction that the timesten ODBC could not manage?

    Is this problem reproducable? i.e. Does it occur whenever you get close to 125 clients connecting to TimesTen? Next time when it happens again, can you check to see whether you can establish a new client/server connection locally on the TimesTen server machine?
    Each TimesTen Client connection requires one server process, and by default, a server process is spawned when a client requests a connection. It is possible that you may have too many processes running on the server, hence it cannot spawn additional server processes to handle the new connections. The good news is that in 7.0.3, the TimesTen server is now multi-threaded and each process can handle multiple client connections (this number is configurable), so it's possible to have fewer server processes for the same number of client connections compared to previous releases.
    Please check out "Specifying multiple connections to the TimesTen Server" in the 7.0.3 Oracle TimesTen Operations Guide for more information on how to turn on the multithreaded mode.
    Regards
    Simon

  • Error 112: The AIR target doesn't support native extensions

    I have been developing an AIR app in Flash Builder.  I recently created an ANE (Air Native Extension) for FMOD and linked it with my AIR app.  ADT user-unfriendliness aside, I got it working.
    When I try to update my Ant build script to package the ANE files with my AIR project, ADT complains:
    My-App-Descriptor-Name.xml: error 112: The AIR target doesn't support native extensions.
    This comes as a surprise to me, because I've been compiling and developing the AIR app in Flash Builder with the ANE extensions.  It also doesn't make sense, because I packaged my ANE with platform specific libraries for multiple platforms (Windows and MacOs), so when the AIR app runs on these platforms, it should work.  However, this aside, my main point is:
    How the heck does this work in Flash Builder if AIR targets do not support ANE?  What is Flash Builder doing, exactly, when I Run or Debug an AIR app with ANEs?
    Thanks!
    JW

    hi I have the same issue while publishing my app app.xml: error 112: The AIR target doesn't support native extensions. plz help

  • SP2013 BI Services that support SSAS drillthrough action

    Is there a comprehensive list of applications / services in SP2013 that support SSAS drillthrough actions (SQL 2012)? I am working with a client that currently utilizes Excel Web App, which doesn't appear to support drillthrough action (I know that
    there are some work arounds, but I want out of the box SSAS defined functionality).
    Which BI services on SP2013 are supported? My best guesses:
    Excel Web App - No?
    Excel Services - Yes?
    SSRS             - Yes?
    Power View     - No?
    PerformancePoint - Yes?

    Thanks for the reply. I was hoping for something more granular, and was referring to drillthrough actions that are explicitly defined in SSAS.
    If the questions is too broad (which is a shame, as these should really be considered a highly related stack), then I am specifically targeting whether or not
    drillthrough is available in Excel Services 2013.
    I have found older TechNet articles that layout unsupported features for 2007 / 2010, but have not found a similar listing for 2013 except for this:
    http://technet.microsoft.com/en-us/library/jj219751.aspx which conspicuously leaves drillthrough out of the list of compared features. Also, drill down is not what I need, I am referring
    to the "Show Details" functionality available in the full version of Excel 2013.
    Anyone?

  • LDAP supporting multiple DNS domains

    I have an environment with multiple DNS domains, and am configuring a Directory server (DS 6.3.1) to centralize various OS configuration maps including user authentication. None of the DNS domains have unique data, so I'd like to do something like storing all the real data in one suffix, then somehow have all clients look to that primary suffix. I am aware that the Solaris Native LDAP client wants to bind to a nisDomainObject that matches its DNS domain. I'm just having a hard time believing that I really need to manage all those individual suffixes when they don't have unique data requirements.
    Take as an example the following domains to be supported: foo.example.com, bar.example.com, dev.example.com, qa.example.com, prd.example.com (no hosts are actually in "example.com", they are all in subdomains). Again, all share common configuration data, same user IDs, etc - no unique maps are required.
    I created a suffix, "dc=example, dc=com", set it up with idsconfig. All is well there.
    [A] My first thought is to bind all Solaris clients, regardless of their DNS domain, to the baseDN of "dc=example, dc=com" in order to avoid having a separate suffix for each DNS domain. I tried to do this using "-a defaultSearchPath=dc=example,dc=com" with ldapclient init, but it failed with an error indicating it wants to see the nisDomainObject of its real DNS domain.
    The second though I had, which I don't believe is possible, is to find some sort of a LDAP equivalent of a symbolic link so that I could actually have an object for each DNS domain, but it would simply point back to "dc=example,dc=com". I can't find anything in the documentation which suggests this is possible, but I'd love to be wrong!
    [C] Perhaps this could be somehow done with a rats nest of SSDs, but that really seems unwieldy, right? I plan on using a fair amount of the available objects, so it would be many SSDs per suffix. Yuck.
    Can anyone comment on my above thoughts, or provide how they would go about supporting multiple DNS domains that have common configuration data?
    Thank you,
    Chris

    Ok, I answered my own question. Turns out it's pretty easy. Just use the "-a domainName=example.com" option with `ldapclient` then make sure that the FQDN of the LDAP server is available (or use its IP address). My problem was that the ldapclient overwriting nsswotch.conf was clobbering the SSL session because I used the FQDN which couldn't resolve.
    This leaves an interesting condition of having the output of "domainname" not match the DNS domain. I'm testing now to see if this causes any unexpected issues with our environmnet, but I suspect it's not a problem.

  • HT201250 Hello i am using TimeMachine to back-up entire Mac image (data + system) on an usb-local drive. I would like (on top of it) add a specific plan to back up some files on a remote network drive. Does TimeMachine support multiple back-up plans ? How

    Hello i am using TimeMachine to back-up entire Mac image (data + system) on an usb-local drive. I would like (on top of it) add a specific plan to back up some files on a remote network drive. Does TimeMachine support multiple back-up plans ? How ?

    Time Machine is capable of backing up to multiple locations, and can be used to back up to both a local hard drive and a networked drive (provided that that drive is in or connected to a Time Capsule or another Mac that is sharing it over the network). The catch, though, is that you can't specify different things to back up to different destinations. Whatever you exclude from Time Machine backups is excluded from ALL backups, and whatever is included is included on all.
    So, get a large enough drive that you can back up everything you want in all locations, or use something else for maintaining the network backup.
    More information on these topics can be found here:
    How do I set up Time Machine to a shared drive on another Mac?
    How do I set up Time Machine to a Time Capsule or Airport Extreme?
    "Rotating" Time Machine backup disks

  • Error in allInOne.js: Object doesn't support this property or method

    We are having an issue deploy our website (Developed in .Net) on a specific server. When we try to visualize a report on any browser we get this error:
    Webpage error details
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.5.21022; .NET CLR 3.5.30729; .NET CLR 3.0.30618; OfficeLiveConnector.1.4; OfficeLivePatch.0.0)
    Timestamp: Wed, 7 Apr 2010 17:52:31 UTC
    Message: Object doesn't support this property or method
    Line: 10
    Char: 281690
    Code: 0
    URI: http://{IP ADDRESS}/WebUserInterface/aspnet_client/system_web/2_0_50727/crystalreportviewers12/allInOne.js
    We have install the Crystal reports 2008 runtime and the Crystal report 2008 sp2.5 runtime. Both of them give me the same results.
    It's killing me because i have installed the same solution on many other server without any issue.
    Ben
    P.s. The Web server is  a Window Server 2003 R2 standard edition

    Perhaps using [modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] will at least tell us what dlls are loading. Look at the CR dlls. There should not be any v11 files loaded by your app.
    You may also start considering obtaining phone support for this one. I have a feeling this will take more than just forums to solve...
    Phone support can be obtained here:
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
    Ludek

  • Iwlist scanning gives: Interface doesn't support sc [solved]

    When I'm trying to scan for all available networks I get:
    # iwlist eth1 scanning
    eth1 Interface doesn't support scanning : Operation not supported
    My wireless card works fine if I set every parameter manually. I'm currently using the orinoco drivers that came along with ArchLinux.
    It seems like that the version of the orinoco drivers installed doesn't support the scan stuff. But building the new orinoco drivers failed with
    /usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c: In function `orinoco_ pci_suspend':
    /usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c:330: error: too many a rguments to function `pci_save_state'
    /usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c: In function `orinoco_ pci_resume':
    /usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c:347: error: too many a rguments to function `pci_restore_state'
    make[2]: *** [/usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.o] Error 1
    make[1]: *** [_module_/usr/local/download/orinoco/orinoco-0.15rc2] Error 2
    make[1]: Leaving directory `/usr/src/linux-2.6.11.3-ARCH'
    make: *** [modules] Error 2
    So I did try the wlan-ng26 driver downloaded and installed with pacman.
    I remove the orinoco modules with
    [root@ArchThinkpad orjanp]# modprobe -r orinoco_pci
    But when I try to insert the prism2_pci module, it doesn't exist. Why?
    [root@ArchThinkpad orjanp]# modprobe prism2_pci
    FATAL: Module prism2_pci not found.
    Any heads up on what to do?
    This is iwconfig before removing the orinoco modules.
    [root@ArchThinkpad orjanp]# iwconfig
    lo no wireless extensions.
    sit0 no wireless extensions.
    eth0 no wireless extensions.
    eth1 IEEE 802.11-DS ESSID:"" Nickname:"Prism I"
    Mode:Managed Access Point: 00:00:00:00:00:00 Bit Rate:11 Mb/s
    Tx-Power=15 dBm Sensitivity:1/3
    Retry min limit:8 RTS thr:off Fragment thr:off
    Encryption key:off
    Power Management:off
    Link Quality=0/92 Signal level=-68 dBm Noise level=-122 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:0 Invalid misc:0 Missed beacon:0
    This is lspci
    [root@ArchThinkpad orjanp]# lspci
    00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 04)
    00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 04)
    00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02)
    00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02)
    00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 02)
    00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 42)
    00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 02)
    00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 02)
    00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus (rev 02)
    00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio (rev 02)
    00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem (rev 02)
    01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
    02:00.0 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (rev 01)
    02:00.1 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (rev 01)
    02:02.0 Network controller: Harris Semiconductor Prism 2.5 Wavelan chipset (rev 01)
    02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42)
    This is lsmod before removing orinoco.
    [root@ArchThinkpad orjanp]# lsmod
    Module Size Used by
    radeon 78336 1
    ohci_hcd 23048 0
    ehci_hcd 36488 0
    irtty_sir 7552 0
    sir_dev 18636 1 irtty_sir
    irda 144184 1 sir_dev
    crc_ccitt 2432 1 irda
    parport_pc 29252 0
    parport 38600 1 parport_pc
    rtc 13260 0
    pcspkr 4044 0
    eepro100 32528 0
    orinoco_pci 7552 0
    orinoco 44172 1 orinoco_pci
    hermes 9472 2 orinoco_pci,orinoco
    yenta_socket 23560 0
    rsrc_nonstatic 11648 1 yenta_socket
    pcmcia_core 51488 2 yenta_socket,rsrc_nonstatic
    snd_intel8x0m 19396 0
    snd_intel8x0 34624 0
    snd_ac97_codec 79224 2 snd_intel8x0m,snd_intel8x0
    snd_pcm_oss 56224 0
    snd_mixer_oss 21120 1 snd_pcm_oss
    snd_pcm 98564 4 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
    snd_timer 27268 1 snd_pcm
    snd 59492 7 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
    soundcore 10848 1 snd
    snd_page_alloc 10244 3 snd_intel8x0m,snd_intel8x0,snd_pcm
    i2c_i801 8972 0
    i2c_core 23296 1 i2c_i801
    usbhid 47744 0
    uhci_hcd 33424 0
    usbcore 125560 5 ohci_hcd,ehci_hcd,usbhid,uhci_hcd
    shpchp 100996 0
    pci_hotplug 34760 1 shpchp
    tsdev 8256 0
    joydev 10560 0
    evdev 9984 0
    cpufreq_powersave 2176 0
    cpufreq_userspace 5680 0
    p4_clockmod 6164 0
    speedstep_lib 4868 1 p4_clockmod
    freq_table 5008 1 p4_clockmod
    e100 37760 0
    mii 5760 2 eepro100,e100
    nls_cp437 6144 1
    vfat 14976 1
    fat 41884 1 vfat

    orjanp wrote:
    Thanks.
    I installed the 0.15RC1 version of the Orinoco drivers found here.
    I rebooted but I still had the 0.13 version. I did a make and make install as the readme file said.
    What do I have to do to update the driver?
    do you use a PKGBUILD?
    update the driver: if it was copied to the right place and the kernel knows about it (depmod -a) it should work
    for a start, check under
    ls -la /lib/modules/`uname -r`/kernel/drivers/net/wireless/
    that your module is installed under the correct location (the orinoco files should be newer than the other ones)
    if this is so, make sure you are depmod -a (as root) ... and if even this is ok, then either you are running the new modules or something strange happened

  • Cisco Jabber client to support Multiple e-mail domains

    Hi All,
    Per the following link, CUCM an IM&Presence starts supporting multiple domains at version 10:
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/10_0_1/delta/CUCM_BK_C206A718_00_cucm-new-and-changed-1001/CUCM_BK_C206A718_00_cucm-new-and-changed-1001_chapter_010.html#CUCM_RF_I31EA3AB_00
    However, we have heard from Cisco that there is NO Jabber client that works with version 10 to support multiple email domains.
    This may or not may be true.
    Can someone who has connection with BU confirm this? If there is Jabber client that supports multiple email domains, what is the version and when is it going to be available?
    Thanks,
    Mustafa

    Per-Olov
    How are you dealing with this DA restriction?
    Also, what are your comments about the use of Domain Alias vs. Domain with inetdomainbaseDN pointing to my organization? Which one was your choice?
    Thanks,
    Ivo

Maybe you are looking for