Illegal semicolon send email weblogic forms reports 11g

I have a form that send parameters to a report and buld it on pdf format, then the same is sent by email to the address from the database,
I got this error and I need your help.
I really appreciate.
My configuration:
Weblogic server 10.3.4
Forms & Reports 11.1.1.4
OS. Oracle Enterprise Linux (OEL 5.5)
thanks.
this is the error shown in the log file located in:
FMW_HOME/INSTANCE_HOME/diagnostics/logs/ReportsServerComponent/ReportsServer_Name/rwserver_diagnostic.log
[2012-02-13T22:33:12.384-06:00] [reports] [INCIDENT_ERROR] [REP-50152] [oracle.reports.server] [tid: 18] [ecid: 004i8xiSn1mF8DWFLzjO8A0000nT00001u,0:1:0x5f5e101:100000002] [URI: /reports/rwservlet/getjobid838]
REP-50152 : Se ha producido un error al enviar el correo: Illegal semicolon, not in group. [[
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
     at oracle.reports.utility.Utility.newRWException(Utility.java:1053)
     at oracle.reports.server.MailService.send(MailService.java:588)
     at oracle.reports.server.DesMail.sendFile(DesMail.java:186)
     at oracle.reports.server.Destination.send(Destination.java:578)
     at oracle.reports.server.JobObject.distribute(JobObject.java:2041)
     at oracle.reports.server.JobManager.updateJobStatus(JobManager.java:2761)
     at oracle.reports.server.EngineCommImpl.updateEngineJobStatus(EngineCommImpl.java:154)
     at oracle.reports.server.EngineCommPOA._invoke(EngineCommPOA.java:94)
     at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:637)
     at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:189)
     at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1682)
     at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1540)
     at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:922)
     at com.sun.corba.se.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:181)
     at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:694)
     at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:451)
     at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1213)
     at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.performWork(ThreadPoolImpl.java:471)
     at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:500)
]]

I got the answer,
The problem was that I have email addresses saved on a table as '[email protected]; [email protected]' and it needs to be a colon. ','

Similar Messages

Can on one domain coexist managed servers for ADF11g and Forms&Reports 11g

Is it possible on one Weblogic Domain to exist both Managed server for ADF 11g and Managed servers for Forms 11g and Reports 11g?
How to install on one Weblogic server these two things? Is it possible and what is recommended in this case?
Thnx in advance!

Hi Rade,
Yes, i think it is possible. In my case I have one Weblogic Server Domain with 3 Managed Server,one for deploy application and the others are the Forms & Reports 11g.
For that you have to install Fusion Middlware 11g.
For ADF 11g i think you have to install Oracle Fusion Application.
Edit:
Please read the note: Installing ADF 11.1.1.3 Runtime into WebLogic 11gR1 Patchset 2 (10.3.3) [ID 1094153.1]
Hope this help
Regards
Edited by: scapy on 6/Out/2011 3:14

Sending email with HTML report through a button

Hi,
I've noticed in APEX 4 there is a default option (through Action Menu -> Download Formats: email) to send an email with report in HTML format...
may I know how to accomplish it using a Button... seems like APEX is using javascript:gReport.email.show(); function to accomplish it but I don't know how to implement it...
Please advice
Thanks in advance

qwe12654 wrote:
GokhanAtil,
I've posted a sample on APEX.ORACLE.COM... LOGIN DETAILS ARE SAME AS ABOVE...
ON the page now I have both the SQL based report and interactive report...
On the top right you may see 2 icons.. one for downloading report in PDF (using SQL Report as the source) and the second for sending email (using interactive report, similar logic as what you've recommended)...
Is there a way I may be able to send report via email, using SQL report as the source (rather than interactive report)...?
You can always use APEX_MAIL to send emails.
http://download.oracle.com/docs/cd/E10513_01/doc/apirefs.310/e12855/apex_mail.htm
or the alternative option would be:
to convert all my SQL reports into interactive, would require a bit of efforts (I'll go with it if the above option is not available)... but would need to know how to download INTERACTIVE reports in PDF, excel and CSV formats using a button ... similar logic to what you've done for sending emails
Thanks again for all your assistanceIt's very easy to make buttons for downloading the interactive reports in HTML, CSV or PDF.
I have created a PDF button and put the link:
http://apex.oracle.com/pls/apex/f?p=40418:11:1316531694094700:PDF
"1316531694094700" is the value of p_instance. You can find it from HTML codes of your page:
<input type="hidden" name="p_instance" value="1316531694094700" id="pInstance">
You can change PDF to CSV or HTMLD (so your visitor download the report in CSV or HTML)
Best Regards,
Gokhan
If this question is answered, please mark appropriate posts as correct/helpful and the thread as closed. Thanks

Can Install & Configure Forms & Reports 11g on Windows XP SP2 (32-bit)

Hi All;
can install & configure forms & reports 11g on windows xp sp2 (32-bit)
regards

Yes, Oracle Fusion Middleware (Forms/Reports) 11g is certified for Windows XP. Check out Oracle Fustion Middleware Supported System Configuations for more information.
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

How can i send emails from forms

I need to be able to send emails from forms 6.(assuming the pc is running Outlook) What is the best way of doing this? Would OLE or DDE control of Outlook be the easiest method?
If anyone has done this please let me know.

See:
iOS: Unable to send or receive email
I would Google for:
setup verizon email on phone
for the settings to use.

Help: how to send emails from FORMS?

Are there simple steps to send emails from FORMS?
Thank you in advance.
Jimmy

I'm sure there are many ways to send emails from Forms. Personally I never had to do this, but I can imagine following ways.
a) use UTL_SMTP-Package to send the email via your database
b) use a Java-Call
Peter

Sending emails via Forms or pl/sql

Does anyone know how to implement UTL_SMPT for sending emails via Forms or pl/sql ?
If not, any other suggestions for sending a newsletter-type of email to a fairly large list of people ?
Thanks,
Bob

If your are using microsoft windows you can achieve this by using MAPI SESSION & MAPI MESSAGE ActiveX Control.
These controls are not installed in windows by default, you have to install these from some cd like visual basic, visual studio etc.
Zulqarnain

Apex 4: How to send email when form is submitted?

Hi,
Using Apex 4.0.2 on DB 11g, I've a form with around 80 fields and 4 check boxes.
When the user clicks on submit button, besides saving the values in the database I also have to send emails. Selection of the 4 check boxes decides whom the email has to go to, i.e if 2 check boxes are checked, send 2 emails.
In the emails, some contents will be based on the data the user has filled and some from the database; also data in different emails will be different.
From what I've read, to send email I've to use APEX_MAIL API and make a conditional process depending on the check boxes selected. Also that I have configure mail server in database and that mail sever has to accept autonomous user (i.e. sending email without password)
Is this the right approach?
How can I do this?
Is there any example/tutorial that will guide me in doing this?
Thank you for your time.

The Apex email package is very simple.
v_id := apex_mail.send(
          p_to        => v_to,
          p_from      => v_from,
          p_subj      => v_subject,
          p_body      => v_body,
          p_body_html => v_html);It's up to you how you get the values of the variables.
Also that I have configure mail server in database and that mail sever has to accept autonomous userThe mail server is not in the database, but you do have to inform Apex which server to use (smtp.yourcompany.com).
Most smtp servers require user and password. In that case you have to write your own procedure. Search the pl/sql forum for email authentication and you will find many examples.
It is probably also possible to configure the smtp server in such a way that requests coming from the database do not need authentication. That is how we have it configured (but I don't know how the administrator did it, though).

Installing Oracle Fusion Middleware (Forms/Reports) 11g on windows 2012 x64

Hi All,
I'm planning to install oracle fusion middleware 11g (forms/reports) on windows 2012 64 bit.
Once i started the installation of weblog server 10.3.6 it went fine without any error at this stage.
In second stage i tried to configure it, but in the configuration process "*Creating Domain*" is getting failed.
Placed some sample message below from the log file.
[2014-05-22T10:26:30.563+03:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000KOYojYVCWr^pxSP5iW1JVQQa000000,0] Setting valueOf(CREATE_DOMAIN) to:false. Value obtained from:USER
[2014-05-22T10:26:30.563+03:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000KOYojYVCWr^pxSP5iW1JVQQa000000,0] Setting valueOf(EXTEND_DOMAIN) to:false. Value obtained from:USER
[2014-05-22T10:26:30.563+03:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid: 0000KOYojYVCWr^pxSP5iW1JVQQa000000,0] Setting valueOf(EXPAND_CLUSTER) to:false. Value obtained from:USER
[2014-05-22T10:26:30.563+03:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 10] [ecid:
[ecid: 0000KOYolfhCWr^pxSP5iW1JVQQa000003,0] Adding Element:CREATE_DOMAIN_ID for writing.
Any help in the regard will be greatly appreciated.
Thanks
Syed

Hi,
1)As per certification matrix Forms and Reports 11.1.1.7.0 is supported on Windows 2012.
   So in order to install Forms and Reports you need to first install the Forms and Reports software binaries then need to run the config.sh command from %ORACLE_HOME%/bin.
   No need to create any domain using the config.sh from Weblogic home.
2)Please see if the below prerequisites were met :-
   . Assign Proper ip, hostname & domain name
. Entry of ip, host name & domain name in etc/hosts file
. Disable anti-virus if any
. Disable ipv6, a
. Disable Windows Firewall, Windows Update & Windows Management Instrumentation at Service level (services.msc)
. Create 2 folder "tmp" & "Java" for temp, jdk & jre installation. And set the path of installed jdk in Environment Variable
Regards,
Prakash.

Installing Form, Reports 11g

For the Last few weeks i have been reading all the documents on the internet,
so i at last became able to
install Oracle Databse 11g
install RCU /installing Schemas, all of it,
installling weblogic 1033
using identity Managment installed OID etc
identity manager didn't gave any error
when prompted at last to Portal Forms, Reports and discoverer
just strucked at providing "Specify OID informtion" hostname,portnumber etc
identity manager summary show port number 3131,3060,password and user name are also correct,
but pressing 'next' gives me error message "Verify Credentials, Make sure hostname,port number, password are correct"?
Kindly someone,

i did it somhow,
deselecting portal and
select forms, reports only
then skip the specification screen of OID,
installed firefox 5.0.1 and jre 6u27, run test.fmb which was in forms folder,
but it do not run any other FMB it gives a TNS error?
Kindly someone,
Edited by: kashif, pakistan on Oct 3, 2011 12:37 PM

Send email via Forms 6.0

hi, I tried article-id = 61736.1. I wanted to send txt file by email. but
couldn't. my attachement file : c:\hello.txt and send it. when I
entered inbox, attachement file appeared "Untitled".
cutted source is below
msg_attch := OLE2.GET_OBJ_PROPERTY
(message1, 'Attachments');
attachment := OLE2.INVOKE_OBJ(msg_attch, 'add') ;
OLE2.SET_PROPERTY(attachment, 'name', Attch);
OLE2.SET_PROPERTY(attachment, 'position', 0);
OLE2.SET_PROPERTY(attachment, 'type', 1);
OLE2.SET_PROPERTY(attachment, 'source', 'C:\hello.txt');
what can I do?
many thanks.

Hi Zahid
From Forms 6.0, you need to call Reports using standard SRW.Run_Product call. Please refer to the product document for other SRw calls which can be used for Forms/Reports integration. In this SRW call, you need to sent the runtime argument to Reports. In your case, write a pl/sql code which would set the destype=mail, desformat=html and desname set to the email address for reciever which you would be fetching from DB in Forms application. And then send these arguments in the SRW call to run the Reports.
Thanks
Rohit
Thanks
Rohit

Send email from forms

Can anybody send me a code how to send an email from forms
with attachement for multiple users
I am using oracle 8i and forms 6i
My mail application is Novel group wise
Thanks for your help

Oracle Reports can be run directly to email.
Check out the DESTYPE parameter.
To send emails you can use a call to Java Mail using the Java importer. There is a sample form for this in the Oracle9i Forms demos. This should work in 6i also.
You might also be able to use email from the database with the UTL_SMTP package:
http://otn.oracle.com/sample_code/tech/pl_sql/htdocs/maildemo8i_sql.txt

Cannot Send Email from Crystal Reports Viewer; MAPI:Overflow

I am trying to send a report via email with crystal reports, but i get the following error message:
"The following unexpected error occured while trying to send the report to MAPI: Overflow."
I am using Outlook 2010, Win 7 x64 bit.
Does anyone have any ideas or thoughts?

Yes, it is a 3rd party app that opens Crystal Reports Viewer. Attached are the screen shots I get when try to send the report as an email.
-Dan

Send Email Attaching the Report generated in Program.

Hi All,
I am generating a report in list format with write statements.
My requirement is to send an email attaching this report as an attachment.
I wanted to know how to get the listobject of the report generated by my program from the memory. Can anyone guide me with this ?
It will be appreciable , If any one can give me more information on sending mails attaching the reports generated by the program.
Thanks in advance,
Mayank

Hi,
I think the problem is not clear.
My problem is to get the listobject name which got generated after the program run.I want to attach this list report to the email. I have seen a code from one of the link.
Here it is.
List of Users According to Logon Date and Password Change
NOTE: Create ALI/OTF Document in Spool
SUBMIT rsusr200 WITH valid = 'X'
                  WITH notvalid = space
                  WITH unlocked = 'X'
                  WITH locked = space
             EXPORTING LIST TO MEMORY AND RETURN.
<b>* Read list from memory into table
CALL FUNCTION 'LIST_FROM_MEMORY'
    TABLES
      listobject = lt_listobject
    EXCEPTIONS
      not_found = 1
      OTHERS     = 2.
IF sy-subrc <> 0.
Error in function module &1
    MESSAGE ID '61' TYPE 'E' NUMBER '731'
       WITH 'LIST_FROM_MEMORY'.
ENDIF.</b>
Because listobject is of size RAW(1000)
and objbin is of size CHAR(255) we make this table copy
CALL FUNCTION 'TABLE_COMPRESS'
    TABLES
      in             = lt_listobject
      out            = lt_objbin
    EXCEPTIONS
      compress_error = 1
      OTHERS         = 2.
IF sy-subrc <> 0.
Error in function module &1
    MESSAGE ID '61' TYPE 'E' NUMBER '731'
       WITH 'TABLE_COMPRESS'.
ENDIF.
Here the report is sumitted with the option of exporting the list in to the memory which is later read using 'LIST_FROM_MEMORY'.
But here i need the same report's output to be captured and want to read the list generated from memory into table.
How can i get the listobject of the list generated by the report in the same report program itself ??
Please let me know.
Mayank

Sending email notifications in oim 11g approval flow dynamically

Hi,
I have 4 level approval workflow in oim 11g and developed custom composite to get all the approver ids and and assigning these ids into 4 variables.
And used these variables in my custom 4 level sequential workflow. This workflow is working fine. Now I need to update this composite to send email notifications to the approver. So updated code to retrieve email ids and to store them in 4 more vairables. I cannot send all emails at a time thru the code. I need to send email only to the corresponding approver only when the flow reaches to that particular level.
Subject and body will be same but the email address will vary.
Can you please let me know the step by step process to implement notifications to these many levels.
If you think, this is not correct approach (storing all email ids in variables and then sending notifications), please let me know correct approach.
Thanks,
Mary

The way to do it would be to put your human task inside a while loop. This while loop would set a variable to the approver's userid and would continue till all the four approve it. In your human task you need just one approver and that would be the variable which the while loop sets.
If you do it this way, then you can use the OOTB notification tab in the .task and select the 'Assignee' as the email notification receiver and you won't have to worry about getting the email ids as well.
As for the current approach which you have, that is of using the sequential approvers in the human task, I haven't tried it, but just try setting the notification tab in the .task to 'Assignee' and event 'On Assignment'. That should do it as well.
-Bikash

Illegal semicolon send email weblogic forms reports 11g

Similar Messages

Maybe you are looking for