IllegalStateException: Cannot forward to same URI

I am getting the below error. Can some one explain
this error? Thank you.
500 Internal Server Error
com.livesoftware.jsp.JSPServlet:
java.lang.IllegalStateException: Cannot forward to same URI '/telecom/ErrorJSP.jsp'
What does this mean and what should I look for.

It seems that your error page has an error, and tries to forward to itself.
This would result in an endless loop.
Check the page /telecom/ErrorJSP.jsp to see why it would forward to itself.

Similar Messages

Java.lang.IllegalStateException: Cannot forward. Response already committed

i have deployed my application on Websphere application server 5.0. most of the time my jsp page works properly with any exception, but somtime it give me expeception and display page uncompletely rendered.
Follwoing exception occure on particual page with particular record and same page works correctly with other reocrds....
java.lang.IllegalStateException: Cannot forward. Response already committed. (Servlet 2.3, SRV 8.4)
     at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:160)
     at com.mcb.cpms.presentation.controllers.CPMSController.dispatchRequest(CPMSController.java:918)
     at com.mcb.cpms.presentation.controllers.CPMSController.doGet(CPMSController.java:1278)
     at com.mcb.cpms.presentation.controllers.CPMSController.doPost(CPMSController.java:1308)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110)
     at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174)
     at com.ibm.ws.webcontainer.servlet.IdleServletState.service(StrictLifecycleServlet.java:313)
     at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116)
     at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283)
     at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42)
     at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40)
     at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:948)
     at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:530)
     at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:176)
     at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:79)
     at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:201)
     at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
     at com.ibm.ws.webcontainer.cache.invocation.CacheableInvocationContext.invoke(CacheableInvocationContext.java:114)
     at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:186)
     at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
     at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
     at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:610)
     at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:431)
     at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:593)
i will be thankfull if any one have any idea about it.....
waiting for your immediate response

Hi Junaid,
Your code can be work correctly on different servers or with other records but it can not be handled with buffer or autoflush,
I had same problem a few weeks ago. And lastly I had to control before printing any output. My application was working on WebSphere but not on Tomcat, so it is general problem.
The only way if you have to put some output before sending redirect:
When you want to redirect the page, write window.location = ... (javascript code).
When page is loaded automatically will be redirected to the page you want. But of course it is a bit slow.
Good Luck,
isturk.

Java.lang.IllegalStateException: Cannot forward a response that is

          Hello,
          Went through the article
          http://dev2dev.bea.com/articles/platform7_feature.jsp
          I thought if you have a workaround for the following issue.
          Any help to solve this issue is much appreciated.
          thx,
          -Sujatha.
          I am using JATO framework and have developed JSP's.
          Running an application on top of weblogic 6.1 sp4 container.
          The OS is Solaris 5.8.
          Every time i access the jsp's, getting the following exception.
          java.lang.IllegalStateException: Cannot forward a response that is
          already committed
          at
          weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:132)
          at
          com.iplanet.jato.view.ViewBeanBase.forward(ViewBeanBase.java:346)
          at
          com.iplanet.jato.view.ViewBeanBase.forwardTo(ViewBeanBase.java:267)
          at
          com.iplanet.am.console.base.ConsoleServletBase.onUncaughtException(ConsoleServletBase.java:240)
          at
          com.iplanet.jato.ApplicationServletBase.fireUncaughtException(ApplicationServletBase.java:1023)
          at
          com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:469)
          at
          com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:324)
          at
          com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:294)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
          at
          weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:262)
          at
          weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:198)
          at
          weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2637)
          at
          weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2359)
          at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
          at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)


thank you dvohra21 the application is deployed in development .Its not session inactivity because this happen when l'm busy using the application ,reducing the application speed .

Java.lang.IllegalStateException: Cannot forward ...

as OutputStream or Writer has already been obtained.
Getting this error. Using
Jdk1.3.1_01 with Tomcat. This did NOT happen in JavaWebServer2.0 (30 day demo version).
This is the part of the code that is giving me the problems.
RequestDispatcher showDispatcher = getServletContext().getRequestDispatcher(showService);
showDispatcher.forward(req,res);
What I am doing is using this as a central servlet that all jsp pages must go through to get to a servlet, which in turn returns to a jsp page.
Now I will note this, as i've seen before in other similar requests. I am NOT using any Printwriters in this servlet.
The "showService" is a hidden field on the request jsp page that tells this servlet where to go afterwards.
As I said before, this worked with NO problems at all. Considering I wanted to get away from JWS2, and go to Tomcat, this is the problem it gave me. I have been able to get all JSP pages to work. Servlets all go through this, so i didn't want to change all my servlets and jsp pages to go direct to the servlets. (Security thing).
Thanks to anyone who can help me out.
...Ordio

taskDispatcher.include(req, res);
showDispatcher.forward(req,res);you can use include and forward at the
same time in the old Servlet/JSP version, as the
include function will automatically flush the
output(say the JSP) to the client, that's why
something's written out but you don't know! while,
apparently, forword function requires nothing shoud be
sent to client.Makes sense to me. :)
since the program works fine in Jave web server, i bet
you must be using Tomcat 3.X or even older which use
old version of Servlet/JSP specs and implementations.Ahh... that may explain why. I am using tomcat 3.2.3.
So, either update the Tomcat to 4.0(which is yet a
beta version), or find any other server else. (I
assume you don't want to re-write the whole program).Yeah, you are right... I do not want to re-write everything to get it to work. I will update to Tomcat 4 (I know it is in beta, and supposedly it was supposed to be released today.)
Yeah, i just grabbed tomcat 4, and here's the info from the Release Plan 4.0
Sunday, September 9, 2001 Tomcat 4.0 Release Candidate 1
Thursday, September 13, 2001 Tomcat 4.0 Release Candidate 2
Monday, September 17, 2001 Tomcat 4.0 Final Release
Thanks for helping me out, and letting me know that the problem is likely tomcat 3.X... I will try this out on 4, and reply later.
...Ordio

Tiles- Cannot forward after response has been committed Error

I am trying to use following approach for my tiles implementation but i am getting error like
java.lang.IllegalStateException: Cannot forward after response has been committed.
I have gone thorugh the other posts regarding the same error but not helping me.
Any clues greatly appreciated.
Thanks,
Sachin
"I haven't found a way to directly dispatch to a tiles definition, but you can eliminate the need for multiple "wrapper" JSPs by creating a single "tilesDispatch" JSP that is able to dispatch to different tiles definitions, and establishing a convention for mapping URLs to that JSP, and identifying the tiles definition you want to load.
For example, you could use the following convention to identify a tiles definition:
/tiles/defName
where "defName" is the name of the tiles definition (from tiles.xml) that you want to use. The code for the tilesDispatch.jsp would be as follows:
<%@ page contentType="text/html;charset=UTF-8" language="java" %>
<%@ taglib prefix="t" uri="http://jakarta.apache.org/struts/tags-tiles" %>
<%
String tilePath = request.getRequestURI();
int slashIndex = tilePath.lastIndexOf('/');
if (slashIndex >= 0) {
tilePath = tilePath.substring(slashIndex+1);
%>
<t:insert definition="<%=tilePath%>" flush="false"/>
The scriptlet code takes the request URL (e.g. /tiles/defName), strips off everything up to and including the final slash (e.g. defName), then the tiles "t:insert" tag is used to look up and insert the corresponding tiles definition.
In order to map all URLs of the form /tiles/* to the tilesDispatch.jsp, you would need to add the following to your web.xml:
<servlet>
<servlet-name>tilesDispatch</servlet-name>
<jsp-file>tilesDispatch.jsp</jsp-file>
</servlet>
<servlet-mapping>
<servlet-name>tilesDispatch</servlet-name>
<url-pattern>/tiles/*</url-pattern>
</servlet-mapping>
Note: You may need to insert a slash before tilesDispatch.jsp in the <jsp-file> element. I am using pre-compiled JSPs, so my configuration is a little different. So if <jsp-file>tilesDispatch.jsp</jsp-file> doesn't work, try <jsp-file>/tilesDispatch.jsp</jsp-file>.
Once you have this set up, you can refer to tiles definitions using the /tiles/defName convention in your faces-config.xml. For example, if you have two tiles definitions in your tiles.xml file: tile1 and tile2, you could have something like the following in faces-config.xml:
<navigation-rule>
<from-view-id>/tiles/tile1</from-view-id>
<navigation-case>
<from-outcome>success</from-outcome>
<to-view-id>/tiles/tile2</to-view-id>
</navigation-case>
</navigation-rule>
Note that when I have used this convention, I also have used the prefix mapping for JSF. That is, when linking to a JSF page, based on a tiles definition, from a non-JSF page, the URL would be as follows:
/faces/tiles/defName
In this case, the Faces servlet is initially invoked, which sets up the JSF environment. Then the /faces prefix is stripped off, and the remaining URL (/tiles/defName) is routed to the tilesDispatch.jsp, which strips off the /tiles/ prefix, and inserts the "defName" definition.
We are currently using this approach in a number of web apps, and it is working very reliably. I hope this helps.

Hi gimbal2,
I hope to better explain.
In my JSF code I have the next:
<html xmlns="http://www.w3.org/1999/xhtml"
xmlns:ui="http://java.sun.com/jsf/facelets"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:rich="http://richfaces.org/rich"
xmlns:a4j="http://richfaces.org/a4j"
xmlns:fn="http://java.sun.com/jsp/jstl/functions">
     <h:body>
          <ui:composition template="/template.xhtml">
               <ui:define name="page">
                    <h:head>
                         <h:outputStylesheet ...
                    </h:head>
                    <h:form id="form1">
                         <rich:dataTable      id="table"
                                        value="#{listBeanRequest.elements}"
                                        var="element">
     </h:body>
</html>
In the listBeanRequest class, the method getElements() has a line, Integer h = Integer.valueOf("a");, which efforts the java.lang.NumberFormatException
An in my web.xml I have:
<filter>
     <filter-name>SecurityFilter</filter-name>
     <filter-class>my.filter.SecurityFilter</filter-class>
</filter>
I'm using JSF 1.2 running on Apache Tomcat 6

Cannot forward a response that is already committed exeption after Log out

Hello,
I am using Jdeveloper 11.1.1.3.0, ADF DC, ADF Faces, ADF security.
I have a logout button in my template, and I want the user to go back to login page (login.html; which was generated automaticlly when you use ADF security) after successful Log out.
here is my logout method
    public String doLogOut() throws IOException {
        // Add event code here...
        ExternalContext ectx =
            FacesContext.getCurrentInstance().getExternalContext();
        HttpServletResponse response = (HttpServletResponse)ectx.getResponse();
        HttpSession session = (HttpSession)ectx.getSession(false);
        session.invalidate();
        response.sendRedirect("login.html");
        return null;
    }when I click the log out button, every thing seems ok, and the user redirected to login.html page. However, I see the following Exception in Jdeveloper Log window.
<Jan 4, 2012 12:16:31 PM EET> <Error> <HTTP> <BEA-101020> <[ServletContext@19059163[app:CTP-New module:CTP-New-ViewController-context-root path:/CTP-New-ViewController-context-root spec-version:2.5 version:V2.0]] Servlet failed with Exception
java.lang.IllegalStateException: Cannot forward a response that is already committed
     at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:122)
     at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:410)
     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
     Truncated. see log file for complete stacktrace
>
<Jan 4, 2012 12:16:31 PM EET> <Notice> <Diagnostics> <BEA-320068> <Watch 'UncheckedException' with severity 'Notice' on server 'DefaultServer' has triggered at Jan 4, 2012 12:16:31 PM EET. Notification details:
WatchRuleType: Log
WatchRule: (SEVERITY = 'Error') AND ((MSGID = 'BEA-101020') OR (MSGID = 'BEA-101017') OR (MSGID = 'BEA-000802'))
WatchData: DATE = Jan 4, 2012 12:16:31 PM EET SERVER = DefaultServer MESSAGE = [ServletContext@19059163[app:CTP-New module:CTP-New-ViewController-context-root path:/CTP-New-ViewController-context-root spec-version:2.5 version:V2.0]] Servlet failed with Exception
java.lang.IllegalStateException: Cannot forward a response that is already committed
     at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:122)
     at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:410)
     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
     at org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl$OverrideDispatch.dispatch(FacesContextFactoryImpl.java:267)
     at com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:473)
     at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:141)
     at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
     at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:710)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:273)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:205)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101020 MACHINE = Mjabr-PC TXID = CONTEXTID = 4b079561b4c220a0:10458ad0:134a7995c3f:-8000-0000000000000241 TIMESTAMP = 1325672191307
WatchAlarmType: AutomaticReset
WatchAlarmResetPeriod: 30000
>Further more when I try to login again, I get this message in the browser
Error 403--Forbidden
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.4 403 Forbidden
The server understood the request, but is refusing to fulfill it. Authorization will not help and the request SHOULD NOT be repeated. If the request method was not HEAD and the server wishes to make public why the request has not been fulfilled, it SHOULD describe the reason for the refusal in the entity. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.Any help is highly appreciated.

Thank you ADF7,
I used this method
    public String doLogOut() throws IOException {
        // Add event code here...
        FacesContext ctx = FacesContext.getCurrentInstance();
        HttpServletRequest request =
            (HttpServletRequest)ctx.getExternalContext().getRequest();
        ExternalContext ectx =
            FacesContext.getCurrentInstance().getExternalContext();
        try {
            ectx.redirect(request.getContextPath() +
                          "/login.html");
        } catch (Exception exp) {
            exp.printStackTrace();
        return null;
    }but when I re login again I get the same error in the browser
Error 403--Forbidden
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.4 403 Forbidden
The server understood the request, but is refusing to fulfill it. Authorization will not help and the request SHOULD NOT be repeated. If the request method was not HEAD and the server wishes to make public why the request has not been fulfilled, it SHOULD describe the reason for the refusal in the entity. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.

Javax.servlet.jsp.JspException: Cannot forward a response that is already committed at

          Hello,
          Went through the article
          http://dev2dev.bea.com/articles/platform7_feature.jsp
          I thought if you have a workaround for the following issue.
          Any help to solve this issue is much appreciated.
          thx,
          -Sujatha.
          I am using JATO framework and have developed JSP's.
          Running an application on top of weblogic 6.1 sp4 container.
          The OS is Solaris 5.8.
          Every time i access the jsp's, getting the following exception.
          java.lang.IllegalStateException: Cannot forward a response that is
          already committed
          at
          weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:132)
          at
          com.iplanet.jato.view.ViewBeanBase.forward(ViewBeanBase.java:346)
          at
          com.iplanet.jato.view.ViewBeanBase.forwardTo(ViewBeanBase.java:267)
          at
          com.iplanet.am.console.base.ConsoleServletBase.onUncaughtException(ConsoleServletBase.java:240)
          at
          com.iplanet.jato.ApplicationServletBase.fireUncaughtException(ApplicationServletBase.java:1023)
          at
          com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:469)
          at
          com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:324)
          at
          com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:294)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
          at
          weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:262)
          at
          weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:198)
          at
          weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2637)
          at
          weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2359)
          at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
          at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)


sorry, but just to make a additional note.
the <c:import > tag library is from JSTL taglib <%@ taglib uri="http://java.sun.com/jstl/core" prefix="c" %>
regards,
Junecello

How to forward the same ports for multiple IPs?

Hi all, I just bought a Linksys WRT54GS router and I would like to forward the same set of ports for two different computers on my network (192.168.1.101 and 192.168.1.3) however when I try to, I get a "Port Overlap" error. Is there another way I can do this? I am trying to set up Age of Empires II. Thanks for any help!

No. You cannot forward the same port to two different computers (or IP addresses).
Here's the reason why:
You and your friend are both playing the game online. You score 1000 points. Your friend scores 10 points. The signal to increase your score 1000 points arrives on port 3078. Which computer is the router supposed to send this signal to? Both computers?   No way!
Most online games have a way to assign different ports to different computers. For example, you might use ports 3075 thru 3078, while your friend uses ports 3175 thru 3178. If your game is setup this way, it should work.
Also, you will want to forward ports to a fixed LAN IP address. In your WRT54GS, note that any fixed LAN IP address must be outside the DHCP server range, and it cannot end in 0, 1, or 255.   So the 192.168.1.101 address is probably an illegal fixed LAN IP address.
Here are all the Linksys rules for using fixed LAN IP addresses:
With Linksys routers, a fixed (static) LAN IP addresses must be assigned in the device that is using the address. So you need to enter the fixed address in the computer or printer, not in the router.
When using a Linksys router, any fixed LAN IP address must be outside the DHCP server range (typically 192.168.1.100 thru 192.168.1.149), and it cannot end in 0, 1, or 255.
Therefore any fixed LAN IP address would normally need to be in the range of
192.168.1.2 thru 192.168.1.99 or
192.168.1.150 thru 192.168.1.254
assuming you are still using the default DHCP server range.
Also, in the computer, when you set up a static LAN IP address, you would need to set the "Subnet mask" to 255.255.255.0 and the "Default Gateway" to 192.168.1.1 and "DNS server" to 192.168.1.1
It is also important that no two devices on your network be set to the same static LAN IP address.
Typically, when I setup gamers, I put thier fixed addresses all together at 192.168.1.21 , 192.168.1.22, etc.   But you can use any legal fixed addresses that you want.

IllegalStateException when forwarding a request

I am getting the following exception
          java.lang.IllegalStateException: Cannot forward a response that is
          already commi
          tted
          when I try to forward a request from one JSP page to another. The code
          at which which the error occurs is
          context.getRequestDispatcher("/resource/resourceView.jsp").forward(request,response);
          --Vishal


Try this
          config.getServletContext().getRequestDispatcher("("/resource/resourceView.js
          p").forward(request, response);
          La
          Saravanakumar wrote in message <8is81g$fud$[email protected]>...
          >If the JSP page output is buffered (by using a page directive with the
          >default value or an explicit size set for buffer), the buffer is cleared
          >before the request is forwarded. If the page output is not buffered (by
          >using a page directive with buffer=none), and if anything has been written
          >to the buffer, an attempt to forward the request results in an
          >IllegalStateException.
          >
          >
          >Vishal Vishnoi <[email protected]> wrote in message
          >news:[email protected]..
          >> I am getting the following exception
          >>
          >> -------------------------------------------------------------------------
          >-----------
          >>
          >> java.lang.IllegalStateException: Cannot forward a response that is
          >> already commi
          >> tted
          >> -------------------------------------------------------------------------
          >-----------
          >>
          >> when I try to forward a request from one JSP page to another. The code
          >> at which which the error occurs is
          >>
          >>
          >context.getRequestDispatcher("/resource/resourceView.jsp").forward(request,
          r
          >esponse);
          >>
          >> --Vishal
          >>
          >
          >

I tried renting a movie last evening & wasn't able to. This evening I rented the sa,e movie & it was playing fine but is now frozen part way through. I can rewind but cannot forward & it keeps freezing in the same spot. Thanks in advance for any help.

I tried renting a movie last night but was unable to. Tonight I was able to rent the same movie & have been watching it but now it is frozen on my TV. I can rewind it but it continues to freeze in the same place. I cannot forward it at all. Thank you in advance for any help.

I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

Cannot forward one page PDF files from mail app

My earlier topic had incorrect problem report so I've created a new topic.
The problem is i cannot forward one page PDF file from mail apps. I use imap set up for my work email.
Multi page PDFs, photos, docs, numbers, all forward OK for both windows and Mac formats.

Update: I hade had a reply from the Good Reader app developer saying this is a known issue even for them. However, they don't know if Apple will fix this or not.
Basically mail app treats all one page PDF as if it's an image and will forward it the same as it would an image. Any non-apple based mail programs will have issues viewing this file..

Error 500: ERROR: Cannot forward. Writer or Stream already obtained. Error

hi
i m unable to fugure out y I m getting this error
it's a suggestion page and on submitting this page I have to reload the page but with status of the page (requires approval) in form of url
earlier say few days back , it was working fine , i had absolutely no issues in this
since 2-3 days everytime i submit the page , i m getting the error
Error 500: ERROR: Cannot forward. Writer or Stream already obtained. Error 500
my code is listed below
pls help
<%@ include file="../includes/sessionChecker.jsp"%>
<%@ page isThreadSafe="false" errorPage="../html/messError.jsp" %>
<%@ page import="java.io.*,java.util.*,java.sql.*" %>
<%@ page import="com.syntaxsoft.util.*" %>
<%@ page import="com.syntaxsoft.util.DateUtil" %>
<%@ page import="com.syntaxsoft.admin.*" %>
<%@ page import="com.syntaxsoft.employee.*" %>
<%@ page import="com.syntaxsoft.db.*" %>
<%@ include file="../includes/cssJsInclude.jsp"%>
<%@ taglib uri="QuinnoxTags" prefix="QuinnoxTags" %>
<html>
<head>
<title>Suggestions</title>
<meta http-equiv="Content-Type" content="xls/html; charset=iso-8859-1">
<link href="../STYLESHEET/stylesheet.css" rel="stylesheet" type="text/css">
</head>
<body>
<%!
     Table sqltab;
     SqlBuilder sqlObj;
%>
<%
     String dofc = "",subject="",suggestion = "",docsrno="",actions="";
     String pick_button = "",locateid = "",employid="",url="";
     String employeeid="";
     String tabname=" ";
     boolean success = false;
     ResultSet rs= null;
%>
<%
     employid = (String) session.getAttribute("empid");
     locateid = (String) session.getAttribute("locationid");
     Employee empobj = Employee.getEmployee(employid);
     DateUtil dateform = new DateUtil(locateid);
     actions = request.getParameter("actions");
     pick_button = request.getParameter("DECISION");
     System.out.println("ACTION"+actions);
     System.out.println("pick_button"+pick_button);
%>
<body>
<%
     if(actions.equals("create")){
          if(pick_button == null){
%>
               <form name="form1" method="post" action="../HRFiles/Suggestions.jsp">
                    <input type="hidden" name="actions" value="<%=actions%>">
               <div class="page_heading">Suggestion Box</div><br>
               <table>
                    <tr><th>From:</th><td><%=empobj.getFullName()%></td></tr>
                    <tr><th>Dated:</th><td><%=dateform.getToday()%></td></tr>
                    <tr><th>Subject</th><td><QuinnoxTags:TextBox type="text" name="subject" maxLength="65" required="true" value=" " label="Subject"/></td></tr>
                    <tr><th colspan="2">Suggestion:</th></tr>
                    <tr><td colspan="2"><QuinnoxTags:TextBox name="suggestion" type="textarea" cols="60" rows="13" required="true" value=" " label="Suggestion" maxLength="250"/></td></tr>
               </table><br>
               <table>
          <tr>
               <td align="right">
                    <input type="submit" name="DECISION" value="Submit" class="button">
               </td>
          </tr>
     </table>
               <input type="hidden" name="empid" value="<%=employid%>"
               <jsp:include page="../masters/flow.jsp" flush="true">
                    <jsp:param name="CREATOR" value="true"/>
                    <jsp:param name="TABNAME" value="SUGGESTION_WKFLOW"/>
               </jsp:include>

          </form>
<%
          else{
               dofc          = dateform.getTodayMillis()+"";
               subject          = request.getParameter("subject");
               suggestion     = request.getParameter("suggestion");
               tabname =request.getParameter("TABNAME");
               // insert into SUGGESTIONS
               // generate key
               IDs idObj = IDs.getIDs();
               docsrno = idObj.getId("SUGGESTIONID");
               sqlObj=new SqlBuilder("SUGGESTIONS");
               sqlObj.setColumn("DOCSLNO",docsrno);
               sqlObj.setColumn("EMPID",employid);
               sqlObj.setColumn("DOFC",dofc);
               sqlObj.setColumn("DOFCZONE",locateid);
               sqlObj.setColumn("SUBJECT",tabname);
               sqlObj.setColumn("SUGGESTION",suggestion);
//          System.out.println("empid is "+request.getParameter("empid"));
               System.out.println("empid is "+employid);
               success = sqlObj.set(SqlBuilder.INSERT);
%>
               <jsp:include page="../masters/flow1.jsp" flush="true">
                    <jsp:param name="DECISION" value="<%=request.getParameter(com.syntaxsoft.admin.WorkFlow.DECISION)%>" />
                    <jsp:param name="empid" value="<%=request.getParameter(\"empid\")%>" />
                    <jsp:param name="VIEWLEVEL" value="<%=request.getParameter(com.syntaxsoft.admin.WorkFlow.VIEWLEVEL)%>" />
                    <jsp:param name="VIEWERID" value="<%=request.getParameter(com.syntaxsoft.admin.WorkFlow.VIEWERID)%>" />
                    <jsp:param name="COMMENTS" value="<%=request.getParameter(com.syntaxsoft.admin.WorkFlow.COMMENTS)%>" />
                    <jsp:param name="DOCSLNO" value="<%=docsrno%>"/>
                    <jsp:param name="CREATOR" value="true"/>
                    <jsp:param name="TABNAME" value="<%=request.getParameter(\"TABNAME\")%>" />
                    <jsp:param name="MASTER_TABLE" value="SUGGESTIONS" />
               </jsp:include>
               <jsp:include page="../includes/redirectInclude.jsp" flush="true">
                    <jsp:param name="url" value="../HRFiles/ViewSuggestion.jsp?flag=empview" />
               </jsp:include>
<%
          } // end of if(pick_button == null)
     } // end of if(actions == create)
     if(actions.equals("select")){
          rs = sqltab.select("select * from SUGGESTIONS");
          if(rs.next()){
%>
               <div class="page_heading">List of Suggestions</div><br>
               <table>
                    <tr>
                         <th>Employee Id</th>
                         <th>Employee Name</th>
                         <th>Suggestion Date</th>
                         <th>Subject</th>
                    </tr>
<%
               do{
                    docsrno = rs.getString("DOCSLNO");
                    employeeid = rs.getString("EMPID");
                    dofc = rs.getString("DOFC");
                    subject = rs.getString("SUBJECT");
                    Employee empobj1 = Employee.getEmployee(employeeid);
                    url = "../HRFiles/Suggestions.jsp?actions=view&docsrno="+docsrno;
%>
                    <tr>
                         <td><a href="<%=url%>"><%=employeeid%></a></td>
                         <td><a href="<%=url%>"><%=empobj1.getFullName()%></a></td>
                         <td><a href="<%=url%>"><%=dateform.getDate(dofc)%></a></td>
                         <td><a href="<%=url%>"><%=subject%></a></td>
                    </tr>
<%
               }while(rs.next());
          } // end of if
     } // end of if(actions == select)
     if(actions.equals("view")){
          docsrno = request.getParameter("docsrno");
          rs = sqltab.select("select * from SUGGESTIONS where DOCSLNO='"+docsrno+"'");
          if(rs.next()){
               do{
                    docsrno = rs.getString("DOCSLNO");
                    employeeid = rs.getString("EMPID");
                    dofc = rs.getString("DOFC");
                    subject = rs.getString("SUBJECT");
                    suggestion = rs.getString("SUGGESTION");
               }while(rs.next());
          } // end of if()
          Employee empobj2 = Employee.getEmployee(employeeid);
%>
          <div class="page_heading">Suggestion Box</div><br>
          <table>
               <tr><th>From:</th><td><%=empobj2.getFullName()%></td></tr>
               <tr><th>Dated:</th><td><%=dateform.getDate(dofc)%></td></tr>
               <tr><th>Subject</th><td><%=subject%></td></tr>
               <tr><th colspan="2">Suggestion:</th></tr>
               <tr><td colspan="2"><textarea name="suggestion" cols="70" rows="10" readonly><%=suggestion%></textarea></td></tr>
          </table><br>
          <table>
               <tr><td colspan="4" align="right">Back</td></tr>
          </table>
<%
     } // end of if(actions == view)
%>
</body>
</html>
rgds

The problem is that you are trying to do a forward somewhere when output has already been sent to the browser: this is not allowed. I cannot find it in your code, so it must be in one of the includes.

I receive an email with an attachment and I forward it the person who I send it to cannot forward it on

Like the question says. I receive an email from someone with an attachment. I can forward it on to someone else but that person cannot send the same email with the same attachment on to other people.

''Zenos [[#answer-662334|said]]''
<blockquote>
Have you tried to save the attachment and then re-attach it when you forward? It may be that the sender or his mail client did something that doesn't relay well, but by rebuilding the message you might improve matters.
You don't say why or how your recipients "…cannot send the same email…". What happens? What errors or error messages do they see?
</blockquote>
I have tried this but it still doesn't work. So many people cannot open .eml files. If I send an E-Mail by forwarding they do not get it the attachment.

JMS SAF client cannot forward messages - Caused by: javax.crypto.BadPadding

Hi,
I seem to be struggling with a problem that I'm not sure if I can ever find a solution.
I have a configured a local JMS client to forward my messages to a remote WLSB 9.2.
The local client is running JDK 1_0_14 on a windows platform.
The remote server is on IBM JRE on linux. Now I'm getting problems when the messages are forwarded by the local SAF client. The client does not seem to be able to decrypt the password I have in my SAFClient.xml. I have pretty much followed every line in the documentation of SAF client and has already revisited it a few times.
It seems to be something to do with the ClientSAFEncrypt utility that I was advised to get the encrypted password which I have put in the XML File. Here is the exception. Any help will be greatly appreciated.
All I know is it is something to do with encoding of the password, but I cannot get a clue what else.
<Mar 25, 2008 12:28:40 PM PDT> <Info> <Store> <BEA-280050> <Persistent store "SAFSTORE0V" opened: directory="C:\depot\javaSrc\logging\stores\default" writePolicy="Direct-Write" blockSize=512 directIO=false driver="NIO">
javax.naming.NamingException: Invalid password key to unlock the passwords in the configuration file [Root exception is weblogic.jms.common.JMSException: Invalid password key to unlock the passwords in the configuration file]
     at weblogic.jms.safclient.jndi.InitialContextFactoryImpl.getNamingException(InitialContextFactoryImpl.java:31)
     at weblogic.jms.safclient.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:162)
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:247)
     at javax.naming.InitialContext.init(InitialContext.java:223)
     at javax.naming.InitialContext.<init>(InitialContext.java:197)
     at com.netflix.messaging.ESBFactory.<init>(ESBFactory.java:103)
     at com.netflix.messaging.ESBFactory.getFactory(ESBFactory.java:45)
     at com.netflix.messaging.NFMessagingManager.getProducerHandle(NFMessagingManager.java:218)
     at com.netflix.messaging.NFMessagingManager.initProducers(NFMessagingManager.java:730)
     at com.netflix.messaging.NFMessagingManager.init(NFMessagingManager.java:863)
     at com.netflix.messaging.NFMessagingManager.start(NFMessagingManager.java:1461)
     at com.netflix.messaging.NFMessagingManager.start(NFMessagingManager.java:1628)
     at com.netflix.logging.messaging.MessageDestinationDispatcher.startMessagingManager(MessageDestinationDispatcher.java:164)
     at com.netflix.logging.messaging.MessageDestinationDispatcher.<init>(MessageDestinationDispatcher.java:25)
     at com.netflix.logging.NFMessageAppender.append(NFMessageAppender.java:72)
     at org.apache.log4j.AppenderSkeleton.doAppend(AppenderSkeleton.java:251)
     at org.apache.log4j.helpers.AppenderAttachableImpl.appendLoopOnAppenders(AppenderAttachableImpl.java:66)
     at org.apache.log4j.Category.callAppenders(Category.java:206)
     at org.apache.log4j.Category.forcedLog(Category.java:391)
     at org.apache.log4j.Category.log(Category.java:838)
     at com.netflix.logging.log4jAdapter.Log4jLoggingAdapter.log(Log4jLoggingAdapter.java:64)
     at com.netflix.logging.NFLogger.log(NFLogger.java:125)
     at com.netflix.logging.LogManager.info(LogManager.java:152)
     at com.netflix.logging.aggregator.Bucketer.init(Bucketer.java:92)
     at com.netflix.logging.aggregator.Bucketer.<init>(Bucketer.java:80)
     at com.netflix.logging.aggregator.TracerAggregator.<init>(TracerAggregator.java:29)
     at com.netflix.logging.aggregator.TracerAggregator.<clinit>(TracerAggregator.java:20)
     at com.netflix.logging.NFLogger.start(NFLogger.java:105)
     at com.netflix.logging.LogManager.registerLogger(LogManager.java:67)
     at com.netflix.logging.test.LoggingTest.sendDefault(LoggingTest.java:32)
     at com.netflix.logging.test.LoggingTest.main(LoggingTest.java:19)
Caused by: weblogic.jms.common.JMSException: Invalid password key to unlock the passwords in the configuration file
     at weblogic.jms.safclient.admin.ConfigurationUtils.doRemoteContexts(ConfigurationUtils.java:475)
     at weblogic.jms.safclient.agent.AgentManager.<init>(AgentManager.java:54)
     at weblogic.jms.safclient.ClientSAFDelegate.open(ClientSAFDelegate.java:65)
     at weblogic.jms.safclient.ClientSAFImpl.open(ClientSAFImpl.java:62)
     at weblogic.jms.safclient.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:160)
     ... 30 more
Caused by: javax.crypto.BadPaddingException: Given final block not properly padded
     at com.sun.crypto.provider.SunJCE_h.b(DashoA12275)
     at com.sun.crypto.provider.SunJCE_h.b(DashoA12275)
     at com.sun.crypto.provider.SunJCE_af.b(DashoA12275)
     at com.sun.crypto.provider.PBEWithMD5AndDESCipher.engineDoFinal(DashoA12275)
     at javax.crypto.Cipher.doFinal(DashoA12275)
     at weblogic.jms.common.SecHelper.decryptString(SecHelper.java:140)
     at weblogic.jms.safclient.admin.ConfigurationUtils.doRemoteContexts(ConfigurationUtils.java:473)
     ... 34 more
java.lang.IllegalStateException: Cannot create context: Invalid password key to unlock the passwords in the configuration file
     at com.netflix.messaging.ESBFactory.<init>(ESBFactory.java:106)
     at com.netflix.messaging.ESBFactory.getFactory(ESBFactory.java:45)
     at com.netflix.messaging.NFMessagingManager.getProducerHandle(NFMessagingManager.java:218)
     at com.netflix.messaging.NFMessagingManager.initProducers(NFMessagingManager.java:730)
     at com.netflix.messaging.NFMessagingManager.init(NFMessagingManager.java:863)
     at com.netflix.messaging.NFMessagingManager.start(NFMessagingManager.java:1461)
     at com.netflix.messaging.NFMessagingManager.start(NFMessagingManager.java:1628)
     at com.netflix.logging.messaging.MessageDestinationDispatcher.startMessagingManager(MessageDestinationDispatcher.java:164)
     at com.netflix.logging.messaging.MessageDestinationDispatcher.<init>(MessageDestinationDispatcher.java:25)
     at com.netflix.logging.NFMessageAppender.append(NFMessageAppender.java:72)
     at org.apache.log4j.AppenderSkeleton.doAppend(AppenderSkeleton.java:251)
     at org.apache.log4j.helpers.AppenderAttachableImpl.appendLoopOnAppenders(AppenderAttachableImpl.java:66)
     at org.apache.log4j.Category.callAppenders(Category.java:206)
     at org.apache.log4j.Category.forcedLog(Category.java:391)
     at org.apache.log4j.Category.log(Category.java:838)
     at com.netflix.logging.log4jAdapter.Log4jLoggingAdapter.log(Log4jLoggingAdapter.java:64)
     at com.netflix.logging.NFLogger.log(NFLogger.java:125)
     at com.netflix.logging.LogManager.info(LogManager.java:152)
     at com.netflix.logging.aggregator.Bucketer.init(Bucketer.java:92)
     at com.netflix.logging.aggregator.Bucketer.<init>(Bucketer.java:80)
     at com.netflix.logging.aggregator.TracerAggregator.<init>(TracerAggregator.java:29)
     at com.netflix.logging.aggregator.TracerAggregator.<clinit>(TracerAggregator.java:20)
     at com.netflix.logging.NFLogger.start(NFLogger.java:105)
     at com.netflix.logging.LogManager.registerLogger(LogManager.java:67)
     at com.netflix.logging.test.LoggingTest.sendDefault(LoggingTest.java:32)

Hi,
I seem to be struggling with a problem that I'm not sure if I can ever find a solution.
I have a configured a local JMS client to forward my messages to a remote WLSB 9.2.
The local client is running JDK 1_0_14 on a windows platform.
The remote server is on IBM JRE on linux. Now I'm getting problems when the messages are forwarded by the local SAF client. The client does not seem to be able to decrypt the password I have in my SAFClient.xml. I have pretty much followed every line in the documentation of SAF client and has already revisited it a few times.
It seems to be something to do with the ClientSAFEncrypt utility that I was advised to get the encrypted password which I have put in the XML File. Here is the exception. Any help will be greatly appreciated.
All I know is it is something to do with encoding of the password, but I cannot get a clue what else.
<Mar 25, 2008 12:28:40 PM PDT> <Info> <Store> <BEA-280050> <Persistent store "SAFSTORE0V" opened: directory="C:\depot\javaSrc\logging\stores\default" writePolicy="Direct-Write" blockSize=512 directIO=false driver="NIO">
javax.naming.NamingException: Invalid password key to unlock the passwords in the configuration file [Root exception is weblogic.jms.common.JMSException: Invalid password key to unlock the passwords in the configuration file]
     at weblogic.jms.safclient.jndi.InitialContextFactoryImpl.getNamingException(InitialContextFactoryImpl.java:31)
     at weblogic.jms.safclient.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:162)
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:247)
     at javax.naming.InitialContext.init(InitialContext.java:223)
     at javax.naming.InitialContext.<init>(InitialContext.java:197)
     at com.netflix.messaging.ESBFactory.<init>(ESBFactory.java:103)
     at com.netflix.messaging.ESBFactory.getFactory(ESBFactory.java:45)
     at com.netflix.messaging.NFMessagingManager.getProducerHandle(NFMessagingManager.java:218)
     at com.netflix.messaging.NFMessagingManager.initProducers(NFMessagingManager.java:730)
     at com.netflix.messaging.NFMessagingManager.init(NFMessagingManager.java:863)
     at com.netflix.messaging.NFMessagingManager.start(NFMessagingManager.java:1461)
     at com.netflix.messaging.NFMessagingManager.start(NFMessagingManager.java:1628)
     at com.netflix.logging.messaging.MessageDestinationDispatcher.startMessagingManager(MessageDestinationDispatcher.java:164)
     at com.netflix.logging.messaging.MessageDestinationDispatcher.<init>(MessageDestinationDispatcher.java:25)
     at com.netflix.logging.NFMessageAppender.append(NFMessageAppender.java:72)
     at org.apache.log4j.AppenderSkeleton.doAppend(AppenderSkeleton.java:251)
     at org.apache.log4j.helpers.AppenderAttachableImpl.appendLoopOnAppenders(AppenderAttachableImpl.java:66)
     at org.apache.log4j.Category.callAppenders(Category.java:206)
     at org.apache.log4j.Category.forcedLog(Category.java:391)
     at org.apache.log4j.Category.log(Category.java:838)
     at com.netflix.logging.log4jAdapter.Log4jLoggingAdapter.log(Log4jLoggingAdapter.java:64)
     at com.netflix.logging.NFLogger.log(NFLogger.java:125)
     at com.netflix.logging.LogManager.info(LogManager.java:152)
     at com.netflix.logging.aggregator.Bucketer.init(Bucketer.java:92)
     at com.netflix.logging.aggregator.Bucketer.<init>(Bucketer.java:80)
     at com.netflix.logging.aggregator.TracerAggregator.<init>(TracerAggregator.java:29)
     at com.netflix.logging.aggregator.TracerAggregator.<clinit>(TracerAggregator.java:20)
     at com.netflix.logging.NFLogger.start(NFLogger.java:105)
     at com.netflix.logging.LogManager.registerLogger(LogManager.java:67)
     at com.netflix.logging.test.LoggingTest.sendDefault(LoggingTest.java:32)
     at com.netflix.logging.test.LoggingTest.main(LoggingTest.java:19)
Caused by: weblogic.jms.common.JMSException: Invalid password key to unlock the passwords in the configuration file
     at weblogic.jms.safclient.admin.ConfigurationUtils.doRemoteContexts(ConfigurationUtils.java:475)
     at weblogic.jms.safclient.agent.AgentManager.<init>(AgentManager.java:54)
     at weblogic.jms.safclient.ClientSAFDelegate.open(ClientSAFDelegate.java:65)
     at weblogic.jms.safclient.ClientSAFImpl.open(ClientSAFImpl.java:62)
     at weblogic.jms.safclient.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:160)
     ... 30 more
Caused by: javax.crypto.BadPaddingException: Given final block not properly padded
     at com.sun.crypto.provider.SunJCE_h.b(DashoA12275)
     at com.sun.crypto.provider.SunJCE_h.b(DashoA12275)
     at com.sun.crypto.provider.SunJCE_af.b(DashoA12275)
     at com.sun.crypto.provider.PBEWithMD5AndDESCipher.engineDoFinal(DashoA12275)
     at javax.crypto.Cipher.doFinal(DashoA12275)
     at weblogic.jms.common.SecHelper.decryptString(SecHelper.java:140)
     at weblogic.jms.safclient.admin.ConfigurationUtils.doRemoteContexts(ConfigurationUtils.java:473)
     ... 34 more
java.lang.IllegalStateException: Cannot create context: Invalid password key to unlock the passwords in the configuration file
     at com.netflix.messaging.ESBFactory.<init>(ESBFactory.java:106)
     at com.netflix.messaging.ESBFactory.getFactory(ESBFactory.java:45)
     at com.netflix.messaging.NFMessagingManager.getProducerHandle(NFMessagingManager.java:218)
     at com.netflix.messaging.NFMessagingManager.initProducers(NFMessagingManager.java:730)
     at com.netflix.messaging.NFMessagingManager.init(NFMessagingManager.java:863)
     at com.netflix.messaging.NFMessagingManager.start(NFMessagingManager.java:1461)
     at com.netflix.messaging.NFMessagingManager.start(NFMessagingManager.java:1628)
     at com.netflix.logging.messaging.MessageDestinationDispatcher.startMessagingManager(MessageDestinationDispatcher.java:164)
     at com.netflix.logging.messaging.MessageDestinationDispatcher.<init>(MessageDestinationDispatcher.java:25)
     at com.netflix.logging.NFMessageAppender.append(NFMessageAppender.java:72)
     at org.apache.log4j.AppenderSkeleton.doAppend(AppenderSkeleton.java:251)
     at org.apache.log4j.helpers.AppenderAttachableImpl.appendLoopOnAppenders(AppenderAttachableImpl.java:66)
     at org.apache.log4j.Category.callAppenders(Category.java:206)
     at org.apache.log4j.Category.forcedLog(Category.java:391)
     at org.apache.log4j.Category.log(Category.java:838)
     at com.netflix.logging.log4jAdapter.Log4jLoggingAdapter.log(Log4jLoggingAdapter.java:64)
     at com.netflix.logging.NFLogger.log(NFLogger.java:125)
     at com.netflix.logging.LogManager.info(LogManager.java:152)
     at com.netflix.logging.aggregator.Bucketer.init(Bucketer.java:92)
     at com.netflix.logging.aggregator.Bucketer.<init>(Bucketer.java:80)
     at com.netflix.logging.aggregator.TracerAggregator.<init>(TracerAggregator.java:29)
     at com.netflix.logging.aggregator.TracerAggregator.<clinit>(TracerAggregator.java:20)
     at com.netflix.logging.NFLogger.start(NFLogger.java:105)
     at com.netflix.logging.LogManager.registerLogger(LogManager.java:67)
     at com.netflix.logging.test.LoggingTest.sendDefault(LoggingTest.java:32)

Cannot forward emails with pictures- it says missing plug ins

I cannot forward messages with pictures. It says "missing plug-ins" I tried saving the pictures but when I put them as attachments it says the same.

Are you sure your download of the images are complete? Are these IMAP e-mails (iCloud uses iMac), POP e-mails, or Exchange? Are you using Mac OS X Mail, or some other application for mail?

IllegalStateException: Cannot forward to same URI

Similar Messages

Maybe you are looking for