Illustrator CC Layer Blending Modes not working

Did Adobe do something to Illustrator CC that the layers with the same object colors are no longer blending. No matter what blend mode I apply the object never blends with the object with the same color behind it
Any ideas?

Document settings? What colors? Screenshots?
Mylenium

Similar Messages

Blend Modes not working in CS6

My blend modes aren't working. If I try to apply a blend mode, no effect.

Hi, Noel. I'm very new at this, so I'll try to give you as much information as I can. Using blend mode on the single merged layer was working for me several hours ago. My process was Gaussian bur on layer, blend mode set to multiply on layer, and then desaturate. When blend mode was working, desaturation looked kinda funny (something wasn't right). I'm following this tutorial: http://wegraphics.net/blog/tutorials/how-to-design-a-vintage-style-ski-poster-in-photoshop /
I tried adding a new layer under the old layer, but still not working. How do I set new layer as a background? I have no intent to save it as a partially transparent PNG.

Blending modes not working in CS6

High everybody, i am working in cs6 and starting to frustrate more and more, tried everything and nothing seems to work. Layer blending modes just seems to stop working at one moment, or at certain layers, i dont know. I have two layers one on top of other, and when i set blending mode on top layer everything just goes white, I will post screenshot of my ps, so if anybody can help me pls.. Thanks!
.

I wanted to do some quick tutorial and this is the one i chose to kill boredom... http://psd.tutsplus.com/tutorials/designing-tutorials/creating-a-cool-3d-web-design-effect / (step 10) if you have time look into it.
The guy copies white rectangular background layer with radial gradient fx (dark red) on top, disables gradient and applies pattern overlay fx with overlay blend mode, so he just inserts pattern onto header layer and result is header with radial gradient and pattern, i know what you are saying and probably know how to do it some other way, but i am really buged how he did it, is it because he worked in older v. of ps?
p.s. this means then that in order for pattern overlay fx to work in overlay blend mode - shapes must have color (not working when colored with #fff or #000) - right?
Thanx

Blend Mode Not Working

My blend mode isn't working for anything, any ideas? Thank you.

You don’t seem to understand what Blend Modes mean.
The Blend Mode works fine but in the absence of a background the pixels are being displayed against the transparent background grid.

History Panel Option to ignore Layer Blend Mode Changes

Using shift+plus and minus keys to see various layer blend modes eats up my History. Not quite sure why it even records... you can't use the History Brush to "blend" previous blend modes. And it is not difficult to go back to a previous blend mode. I'd like to see a History Option to ignore Layer Blend Mode Changes, like you have for Layer Visibility Changes.

OK. Changes in the Blending Dialog don't record in History until committed.Thanks!
But I don't see a way to quickly go through the various Blend Modes like you can with Shift+ plus/minus keys. I really like that keyboard method to rapidly view and compare various Blend Modes.

How to bulid new layer blend modes?

please look link: https://forums.adobe.com/thread/1755389
I did not learn Microsoft Visual Studio, I want to use my algorithms, have same functionin as The layer blend modes in photoshop , but algorithm not the same , written in JavaScript to run very slowly, pls help me.
thx

inline unsigned8 Mul8x8Div255 (unsigned8 a, unsigned8 b)
unsigned32 temp = (unsigned32)a * (unsigned32)b + 128; //how modify here?
return static_cast<unsigned8>((temp + (temp >> 8)) >> 8); //how modify here?
inline unsigned16 Mul16x16Div32768 (unsigned16 a, unsigned16 b)
unsigned32 temp = (unsigned32)a * (unsigned32)b + 16384; ////how modify here?
return (unsigned16) (temp >> 15); ////how modify here?
inline float Mul32x32(float a, float b)
if(a>=b){
rerurn 255-(510-a-b-(255-a)*(255-b)*(b+255)/(255*255)); //here ok
else {
return 255-(510-a-b-(255-a)*(255-b)*(a+255)/(255*255)); //here ok
pls help me
how modify:
inline unsigned8 Mul8x8Div255 (unsigned8 a, unsigned8 b)
unsigned32 temp = (unsigned32)a * (unsigned32)b + 128; //how modify here?
return static_cast<unsigned8>((temp + (temp >> 8)) >> 8); //how modify here?
inline unsigned16 Mul16x16Div32768 (unsigned16 a, unsigned16 b)
unsigned32 temp = (unsigned32)a * (unsigned32)b + 16384; ////how modify here?
return (unsigned16) (temp >> 15); ////how modify here?

Adobe Illustrator CS6 serial number does not work on my new MAC. It does work on my old MAC.

I have Adobe Illustrator CS6 installed on my new Mac but the serial number does not work.
Do I need to remove the program on the old Mac first?

Thanks for you reply
Then I do not understand why the serial number does not work? I have tried to type it several times.
Regards
Einar Tyholdt
9. jan. 2015 kl. 16:16 skrev Monika Gause <[email protected]>:
Adobe Illustrator CS6 serial number does not work on my new MAC. It does work on my old MAC.
created by Monika Gause in Illustrator - View the full discussion
You can install it on two computers simultaneously, so uninstalling is not needed if it's the only other installation.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7080891#7080891 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7080891#7080891
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Illustrator by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I am trying to download Illustrator CC and it is not working. It is sort of stuck on the page "Illustrator is downloading". Any advice?

I am trying to download Illustrator CC and it is not working. It is sort of stuck on the page "Illustrator is downloading". Any advice?

Lena,
Have you downloaded the Application Manager?
You may try to restart the Creative Cloud application by quitting and relaunching it.
Or this may be one for this specialized forum (where you may be able find the answer from previous threads),
http://forums.adobe.com/community/download_install_setup
or for a chat,
Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
or for Adobe phone Support,
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html

Widgets on my desktop using dev-mode not working in Lion

I'm trying to get iStat back ontop of my desktop like I had in Snow Leopard. Dev-mode not working to bring widgets forward anymore. Any Ideas how to do this in lion? In Snow Leopard it was defaults write com.apple.sashboard devmode YES now that isn't working.

When I connect my MBP (mid 2010) to iMac 27" (mid 2010), via Mini DisplayPorts, after pressing Command+F2, iMac screen went "blank" while MBP screen stays "blue" for few seconds and went back to normal. How to solve this problem?

Blue screen on start up. Safe mode not working?

Blue screen on start up. Safe mode not working, any suggestions?

Thank you, I had forgotten about target mode. I was able to back up all of my files. I also copied some additional 50 GB of files of the disk as a stress test and the hard drive worked fine and quick (and because it was quicker than retrieving the same files from a network drive to my desktop).
I was hoping to also unpack the Applejack files on my desktop and put them back so I could run them in single user mode without running /etc/rc. However I haven't been able to get my Linux desktop to mount the iBook in Read-Write instead of Read-Only yet (I don't have access to another Mac at the moment).

Has anyone ever encountered layer blend modes behaving strangely?

I use photoshop quite a bit for retouching and photo compositing. Tonight I encountered a strange problem. I was trying to create a vintage look on a photo and had a number of adjustment layers including a curves, levels, color fill and there were also a few texture/noise layers all set to varying opacities. Near the top of all this I had a vignette layer that was black around the edges and white in the center set to blend mode of multiply. Well, when I was clicking on and off I realize that that vignette layer was definitely lightening the center part of the overall image quite a bit (the part that is white on the vignette layer), almost like a screen. So I flipped the vignette layer through different opacity modes and saw that there was no change in its behavior, every mode was screening the white, even darker color and multiply. I thought maybe it was interacting in a weird way with one of the other layers so I turned all the others off except the back ground-- still no change. Then I dropped the layer down one at time until it was below the background. When I started to move it up again, it was behaving normally for a moment until I moved it up a couple levels in the stacking order and then it went back to the screen behavior. Anyway I shuffled it around a bit but there was no consitency to when it would display the correct opacity and when it wouldn't, so it did not seem to be an interaction with any specific layer. I don't know, but I can't really think of any case where white set to multiply should produce a lighter result even if it were interacting with another opacity. In any case it does seem to me that there is something going on with the overall computation of opacities. I tried creating a new black and white layer and it was also doing the same thing, behaving strange and not displaying the correct opacity.
I'm tired, so I'm going to bed. I'm going to shut off the computer and hope this goes away when I reboot, but if it does not, does this sound familiar to anyone? I'm not a regular visitor to this forum, but I thought I'd put it out there in case anyone else has experienced anything like this. I've only got 5 gigs of ram on this computer and I've been working away for a while... maybe photoshop just couldn't keep up(?) I'm using Photoshop CS5, RGB Adobe 1998 colorspace. I've never had anything like this happen in the last 11 years I've been using photoshop. Hmmm.... hope I don't have to reinstall or call support or worse. fingers crossed.

Nevermind. It is still having the problem. I have to think that this file is just corrupt somehow because I just opened another file and can't seem to cause the same problem. Basically, I can fill a layer with white, put it to a blend mode of multiply or darker color and it will block out everything of the image below, ie totally opaque. The opaqueness varies depending on the if there are other layers also on blend modes, but it does not seem to correspond to normal blend mode interaction. If I put it right on top of a regular layer with an image on it, it totally blocks it out on a blend mode of multiply... weird. I am going to scrap this file and see if the problem recurs in other files. My 2006 Mac Pro is getting some years on it and has been running pretty slow. I'm not a hardware expert but I've done everything I know how to do to maintain it. Was thinking of upping the ram to see if I can hold out a bit longer before I upgrade the computer. Wouldn't surprise me if this problem is related to the computer.

Why is a layer blending mode result altered by adding and effect?

I've done a search online and haven't come up with an answer but does anyone
know why a layers blending mode result is altered by adding an effect?
I am using CS3 on a PC (Windows XP SP2) and have two layers; one a Tiff and
a second a text layer with an ambient light and a spot shining on them. Both
layers have 3D turned on and accept lights and are in the same position in
space.
To make the text, which is coloured black, sit better I changed the layers
blend mode to soft light which works well.
I wanted to soften the edge of the text a little so I added a Fast Blur
effect and suddenly the result of the blend was completely different. If I
turn off the effect it goes back to what it was before but even if the Fast
Blur is set to zero, ie no blur on the layer, the blend result is altered.
Does anyone know what's going on?

Many thanks for that. I tried the Box Blur but it too shifted the result of the blend. In the end, to get this job out of the door, I changed the colour of the text to orange, lowered the opacity and used Multiply as the layer blend mode. Adding the Fast Blur effect to this didn't shift the result of the blend mode. It's not as sexy a look as using Soft Light but it works. I wonder if it's something going on with the maths or this a real bug? <[email protected]> wrote in message news:[email protected].. > Presumably a bug that uses the blur's convolution kernel when it > shoulddn't. Please report at <a href=http://www.adobe.com/go/wish>. Still, > sometimes changing the blend behavior is inevitable. Even if the layers > visually look the same, the actual pixel values may change and thus create > a different result in the blend formulas. That should not be the case > here, though. Replace the Fast Blur with Box Blur set to 8 or 9 iterations > and the result should look the same, but without the blending problem, I > guess. > > Mylenium

Blending mode not looking correct

Hey all. I'm using Photoshop CS6 on a Mac (OS X 10.8.2), and I've run into a wierd problem I've never seen before. I'm creating a seperate layer over a photo, and filling that layer with 50% gray. I then set that layer's blending mode to Overlay. When things are working correctly (and they always have in the past) setting the 50% gray layer to Overlay should render that layer invisible, and it should have no visual effect on the photo underneath. Suddenly this is not the case, and it looks like the grayscale in the photo beneath the gray layer is much brighter. What's really weird is that I tried to recreate this problem on a couple of other pic files, and the Overlay blending mode works fine there! So the problem seems to be only with this one file. Changing the file from CMYK to RGB seems to lessen the effect, but it's still present. I'm sure I'm missing something, but I'm totally stumped. Any help or ideas would be most appreciated. Thanks in advance!

Well, here's a screenshot of my layers pallette, if that's any help. I'd be glad up upload any other setting shot that would help. Thank you.

I can't set a layer blend mode to "Screen"

Hello, I'm new to Photoshop as of an hour ago (I've been using GIMP for 2 years).
I have a layer selected and I want to set the blend mode to "screen". However, the screen mode as well as several others are greyed out and won't let me select them. I'm using Windows 8 Home Premium 64 bit, and Photoshop CS6 Extended (Trial) 64 bit. I'm intending to get Adobe Creative Cloud tomorrow, but is the reason for this that I'm using the trial version? If not, what am I doing wrong? There is a screenshot below to show what I am talking about. Any help would be appreciated. Thank you!
http://i1289.photobucket.com/albums/b504/thomasbowe34/ps_zpsc5e055f5.png

Took me a few second to figure out whats wrong. But the answer is, you're in the 32 bit mode. Changing the mode to 16 or 8 { (Image>Mode>8Bits/Channel) or (Image>Mode>16Bits/Channel) } will make it available.

Illustrator CC (2014) Live Mirroring not working for Mac

I've been trying to get active mirroring to work on Adobe Illustrator and have followed numerous tutorials on getting this setup (Live Mirror Drawing in Illustrator - Vectips // Mirrored drawing in Adobe Illustrator tutorial - YouTube). I've followed the steps exactly, but when I set the number of copies =1, the mirroring turns off. I've done this next to a friend running illustrator on a PC, and his works just fine. Has anyone had any experience with getting this to work?
I've made sure that all shapes and guides are on the same layer, that the bounding box is larger than the art board, and that when I apply the transform effect I have selected the entire layer.

nk,
It may be time for the list (5 is hardly relevant here):
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible), for CS3 - CC you may find the folder here:
https://helpx.adobe.com/illustrator/kb/preference-file-location-illustrator.html
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Illustrator CC Layer Blending Modes not working

Similar Messages

Maybe you are looking for