Illustrator Graphs; Add totals to a column design; Need , (comma) as decimal separator

Hi all
I am editing a German Annual Report.
I live in Australia.
My system runs OS X 10.10.2 and my Adobe Suite CC is English (or Australian, if that does make a difference in some library)
I need to create a bunch of columns and bar graphs.
The label next to a single column or bar is taken automatically from the data spread.
The decimal separator in the data spread is a . (full stop, or dot)
I need it do display a comma on the final graph. This is standard in many European languages.
If I enter a comma in the data spread Illustrator refuses to draw a graph for this value.
How can I do this?
Regards
Romano

Thank you Jacob
I have to play with this and see what happens if I open data with , as a separator at a later stage.
Also I got lots of clients on the go at all times. I can not change my OS settings for this and then unwittingly create a problem on other clients files.
I am looking at solving this for a specific client on a specific project. Also the files may be edited at the clients site (in Switzerland [Swiss German System]) at a later stage.
I just sent them a test file and they tell me the separator is still a . when they open and edit the data.
If it is in deed a OS issue... ...that should change the moment the edit the graph me thinks...
Regards
Romano

Similar Messages

Add Total to Stacked Column Chart on the top and another important thing is the data are from SharePoint site

the same with the following description from another question:
"How can I display a total on top of each column on a stacked column chart (using
reporting services 2008)? If I use Data Labels I can display the
values for each part of the stack on a stacked column, but I want to be display the total.
For Example: If I have stacked column on chart with a value of 10 for the 1st stack, 20 for the 2nd stack,
and 20 again for the 3rd stack - I want to display 50 (the SUM total) as the data label on top of the entire column..."
and a solution for this would create a new column named SUM(category group), this can be done with data source from SQL server, but my data is from SharePoint site list. its query seems can't be changed which means I can't add a SUM column.
what should I do with this? Can anyone give me a hand?
thank you very much.

Hi sophiexu,
If we want to display a total for each column on the top of a stacked chart, we can use a matrix control to display the column total value to work around this issue.
The following thread about how to simulate chart legend is for your reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/cfb4fa19-b2ba-426a-804b-b5ea83d70d62/ssrs-2008-chart-legend-missing-customitems-property
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Add Total for a Column in Data Grid Screen Based on Query

Hi Guys , I have query based on table Payments in which I search By Start Date , End Date and tenant person [ from drop down List ].
How to display sum of Payments.[Amount] column in the query screen , which off-course varies for selected person.
Omar

The data grid doesn't support calculating aggregate functions on columns automatically, but you can write a little bit of code to show the total of the payments right beneath the data grid.
Add a screen member called PaymentsTotal that is the same type as the column that you want to sum.
Drag out the screen member to be underneath the data grid. You can change the sizing settings (e.g. Horizontal Alignment) so that it aligns with the data grid how you want it.
Select the Payments collection and select Payments_Changed from the Write Code drop down.
In the generated method, write the following code:
partial void Payments_Changed(NotifyCollectionChangedEventArgs e)
// Total is the name of the property in my Payment entity that I want to sum
this.PaymentsTotal = this.Payments.Sum(p => p.Total);
When you run the screen, the PaymentsTotal property will show the total of all of the payments that are shown in the data grid.
Justin Anderson, LightSwitch Development Team

How to total a cost column

How do you add/total an expense column in Numbers?

Wstar,
A Numbers Table has Header and Footer cells and Body Cells. It's possible to address a row or column of body cells in its entirety without mentioning the row numbers. So, if your expenses are listed in column C you can write:
=SUM(C)
Body cells in column C will be summed and Header/Footer rows will be ignored. This is one of the great features of Numbers and will save you a lot of effort in programming and editing.
Each table can have up to 5 Header columns and up to 5 Header Rows and 5 Footer Rows.
Jerry

SSRS 2008 have 2 colums with amount needs to add Total cost and than total cost column divide by Total qty get avg

SSRS 2008, have this report
Qty Column --------- Est cost column -----    Mark up Cost Column -   Did add Total cost column
4 pcs-                       $ 2000.00 --------------$ 50.00 --------------- $ 2050.00
Avg Cost
$2050/4= 512.50
how to write this exp to get value $ 512.50
what I did , its not giving me correct result,
=Sum(Fields!estCOSTAMOUNT.Value+Fields!COSTMARKUP.Value)/(Fields!QTY.Value)
can some one please advise what I am doing wrong.
thanks in advance

I tried both exp, did not work
may be I was not clear in the question
Qty Column --------- Est cost column -----    Mark up Cost Column -   Did add Total cost column
4 pcs-                       $ 2000.00 --------------$ 50.00 --------------- $ 2050.00
2 pcs ------------------$ 1500.00  --------------=$100.00 ----------------$1600.00
Total   qty 6 pcs-----$ 3500.00------------------$150.00---------------$ 3650.00
Avg Cost
$3650..00/6= 608.33
my field name
=Sum(Fields!COSTAMOUNT.Value) + want to add cost amount and Mark up and divide with qty total
=Sum(Fields!COSTMARKUP.Value)
=Sum(Fields!QTY.Value)
please help how can I write it to get the result

Get Total of a Column of Advanced Table and use it in Controller in OAF

I have an advanced table on my custom page. I am calculating total of a column in my footer. I am acheiving this using the standard functionality of advanced table by setting total value property of my column to "TRUE" and displaying the total in the tablefooter components.
In addition to this I want to retreive the total value from my footer and use it in my Controller for further validations but I am not able to acheive this.
I tried some code already present in the Community for the same but nothing turned out right for me.
Can anyone please help me on this.

   Hi there ,
You can manually add the values of each row of a column and make use of the value obtained in your controller .
Here is the logic ,
1) get the vo instnace attached to that table .
2) Loop through every single row in the table .
3) get the value and sum up the value and use it in your controller .
int fetchRowCount = vo.getFetchRowCount();
voRowImpl row = null;
int count =0;
if (fetchRowCount > 0) {
RowSetIterator iter = vo.createRowSetIterator("Iter");
iter.setRangeStart(0);
iter.setRangeSize(fetchBidderRowCount);
   for (int i = 0; i < fetchBidderRowCount; i++) {
row = voRowImpl iter.getRowAtRangeIndex(i);
   //use RowImpl getters   10.
         Number personId = row.getPersonId();
count =personId+count;         // add each and every value and have in variable
iter.closeRowSetIterator();
Regards ,
Keerthi

Analysis report with totals on specific columns

I have an analysis report that I need to create totals on specific columns. If I turn on "Grand Totals" from the "Edit View: Table" section, all of the numeric columns will display grand totals. This is a nice automatic feature, but I only need totals of specific columns. Not all numeric columns need totals nor do Grand Totals of some columns make any sense.
For example, to display opportunity details, we will have on the report:
Opportunity Name, Item number, Item Description, Quantity, Price, Extended Price
Since the opportunity may have multiple items on it, having a grand total of quantity and unit price makes no sense. All we need is Grand Total of the opportunity extended price.
Is there a way to selectively turn on/off column totals or is it an all or nothing option?
Thanks in advance.
Edited by: nsidev on Sep 1, 2009 10:10 AM

Actually, i just solved the problem.
Here is what I did:
1. I added a column to the "Design Criteria" section (step 1). To keep the units consistant, I made sure that the data element was suitable for the value (I used a currency element). Ensure you note the position of the new column, mine was in position 11.
2. Under the newly added elements "Column Properties", I set it to HIDDEN and changed the name to "Grand Total"
3. Under the "Edit Formula", I changed the formula to be: SUM(<numeric column>)
4. In "Create Layout" (Step 2), I added a narrative view to the bottom of the page.
5. In the "Edit Narrative View", I set the appropriate formatting and added the following: Total Extended Price: @11
6. Ensure that "Rows to display" is set to 1.
Save and run
All done, works like a charm.

Removing Totals for Break Columns

Hi All,
If we add break on two or three columns in report, it gives totals for each group plus a report level total. Is there any way to remove any group or break's total.
For example, if we have a report on emp table and having groups on deptno and job columns, it would be giving totals like this:
JOB TOTAL:               3000
DEPTNO TOTAL:               3000
report total:               3000
How can we remove any of the above totals?
Thanks
Zahid Khan
Deptno

Looks like this is a popular request!
I have report with a break on Column 1, 2 and 3. I would like to display the Report totla but not the sub totals at each column break. Can anyone please share their experience on how to get rid of the Sub Total for a break column?
Thanks.

Adding a grand total to the columns

Hi
I need to add a total to one of the columns in my report. I have set Aggregation rule as "Sum" but it is not displaying Grand Total.
Am I missing any thing or setting the rule incorrectly?
Please advise.
Thanks in Advance.
Jas

Hi Arvindh
Thanks for your response. I am not using a pivot table I just tried to add total to the table which is created by just selecting columns required in the Define Criteria section.
We can add a total w/o creating the pivot table also. By the way, I have found the solution. The key lies in the second step. If u want me to explain in detail. Just let me know.
-Jas

Add total row with a webservice

Hi there,
Im trying to update a list view to add the totals to a column subtotal. Im following the instructions given on
Webservice Page
When check the response of the webservice I'm not seeing the aggregation response and the total row is not being added. When I add or remove columns through this webservice it does work. Has anyone experiencing the same issue or knows how
to solve this ?
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
<UpdateView xmlns="http://schemas.microsoft.com/sharepoint/soap/">
<listName>User1</listName>
<viewName>{LIST VIEW GUID}</viewName>
<viewProperties/>
<query/>
<viewFields/>
<Aggregations Value="On">
<FieldRef Name="subtotal" Type="Sum"/>
</Aggregations>
<formats/>
<rowLimit/>
</UpdateView>
</soap:Body>
</soap:Envelope>

Hi,
Is this “subtotal” a valid field name and the type of this column is “Number”?
Also, please add this column into the <viewFields/> and do the test again.
Feel free to reply with the test result if the issue still exists.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

Page Total for a Column in JSF HtmlDataTable

Hi All,
I need an example to calculate page total for price column in HtmlDataTable.
Each page displays 10 rows and there are 50 rows hence 5 pages in datatable.How to calculate page total after displaying the rows on page.
Thanks in advance.

Just get the desired sublist of the datalist and sum the price? You can get the starting index and the rowcount from the HtmlDataTable by its getFirst() and getRows() methods respectively and use it in List#subList(). Then iterate over the list and add the price value of every item in a loop to the total value. You can display it in the footer of the datatable. You can define a footer with <f:facet name="footer">.

How to Remove totals on few columns from SEM BPS layout

On SEM BPS layout it has 10 5 charatestics columns
and 10 key figure columns.
out of these key figures I want see totals on some
coulmns and for few columns I do not want to see totals.
for wxample it does not make sense of seeing total under
the salary incrase percentage coulmn.
Please suggest anyway we can remove total for some
columns on the layout

Hey, thanks -- everything worked as you described. It never would have occurred to me that the "put back" button refers to the browser selection not the layout selection, for reasons I give below.
I think Aperture exhibits some conceptual confusion here. First of all, a "light table" is created by the New > Light Table command, and you add images to the newly created light table just as you would add them to an album. But those images don't go on the light table layout until you drag them from the browser to the layout table. The "put back" button and "remove from light table" contextual menu command both mean remove from the layout. The phrasing of the contextual menu command make it sounds as if it will remove the clicked image from the light table's collection of images, like removing an image from an album -- it would have made more sense to name this command "put back". Furthermore, the "put back" button is above the layout display, not above the browser, which to me implies that it applies to selections in the layout display. To select an image in the browser, and click "put back selected" seems backwards -- if you just selected the image in the browser, your attention is focused on the browser, not the layout; from the browser's point of view, the button should read "bring back" not "put back".
The documentation didn't really help when I was trying to figure this out. Sometimes the Aperture documentation refers to just a "light table", as on the overview on page 732. On pages 733 and 734, though, it refers to a "light table album". On page 735 of the Aperture manual there is a very brief explanation of how "to add images to the light table" and "to remove an image from the light table". Here, "light table" refers to the layout not the album. The explanation of the "Put Back Selected" button says to select an image then click the button, and the picture shown is of an image selected in the layout, not in the browser.

How to add total of actual in My work- Task in project server 2010.

Hello all,
I need to add total of actual in My work->Task in project server 2010.
How can I achieve it?
Your help is appreciated.

Hi Rohit,
Unfortunately, there is no configuration which allows having the actual total work in "my tasks" page. Note that you have the total for the period for each assignment in the column next to the "work" column. In case it doesn't suit
your need, I'd suggest to propose for example a simple report, otherwise a development could be quite complex and time consuming.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

How to add description of a column of a table in SQL Azure

Hi
I have some tables in my application database where there are descriptions added against certain columns. Needless to say they were done by using sp_addextendedproperty.
Now I am trying to migrate the Database to SQL Azure. SQL Azure does not support sp_addextendedproperty.
Hence I am not able to figure out how to add descriptions to those columns.
Any help would be much appreciated.
Thanks
Soumyadeb

Hello,
Just as Latheesh post above, Windows Azure SQL database are not support extended stored procedures. That’s one of the limitations on SQL database, and I don’t know there is another way to achieve the same on Azure.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

How to add Total Quantity in Inbound and Outbound Delivery screen

Hi,
I want to add Total quantity field in Inbound and Outbound Delivery screens.
In document flow i can see the line item quantities in ALV Format, but if i select Display the totals above the entry check box
in Change Layout--> Display, i didn't see any totals displayed.
Please help me on this?
Regards
Bhuvana

Hi
If the field is a customer field, see BADI 'LE_SHP_TAB_CUST_HEAD'
Regards
Eduardo

Illustrator Graphs; Add totals to a column design; Need , (comma) as decimal separator

Similar Messages

Maybe you are looking for