Im confused again

What on earth is the third button down for one of the small ones third down. I don't understand x

If you go into settings you can set the button to automatically open the camera when pressed to take photos quickly, if when in the camera application you press the two arrows at bottom right hand side it will open other camera "lenses" which you can use to take panoramas etc.
Good luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Similar Messages

Patch confusion again

Hi hussein,
I have two (2) instances of EBS 11i named DEV and DEV2. Installed them both separately using rapidwiz.
Scenaro 1:
a) I applied patchA to DEV.
b) I copied the data only (proddata) to DEV2, and run rapdiclone so that the DEV2 instance have the DEV1 database. I mean their database contents are identical, but the appstiers are not because patchA was not applied to DEV2 apps tier side.
My question is can I apply patchA to DEV2 instance just to update the appstier side or the forms executables?
thanks a lot

Hi xyes;
I have two (2) instances of EBS 11i named DEV and DEV2. Installed them both separately using rapidwiz.Those ebs has same patch level?
Scenaro 1:
a) I applied patchA to DEV.
b) I copied the data only (proddata) to DEV2, and run rapdiclone so that the DEV2 instance have the DEV1 database. I mean their database contents are identical, but the appstiers are not because patchA was not applied to DEV2 apps tier side.You mean you run preclone on DEV on dbtier than copy from DEV to DEV2, then post clone db succeded and db is up, so yes we can say DEV db=DEV2 db,but what happen DEV2 original DB?
Regard
Helios

Confused again about this

hi,
i got my phone this Christmas so my mum charged for me and tested my sim card in it, my sim card is ASDA(but it is connected with Vodafone I think). my Iphone is sim locked to Vodafone, but worked when I rung my house, BUT if I got a top-up via Vodafone, would I get one of the current "freebies" on offer?

Why do you think other users will have the answer.
You want to know about the relationship between Asda branded sims and Vodafone who
provide the carrier service ( I assume from your posts )
Ask them ie Asda or Vodafone they can give you an answer
Users here can only guess however well meaning

Procedure confusion again....

The exerice is this:
Write a procedure that will transfer all employees to the same dept (your choice) and each of the employees supevisor's emp no to the supervisor number for the department you choose. For example if you chose the Accounting department and the Accounting department's
supervisor number is 1234 then you change all employees to the Accounting department and their respective supervisor to 1234.
Don't even know where to start with this one.
Dee

Don't even know where to start with this one....which, I'm afraid, illustrates the pointlessness of these exams. Even if you pass, you will just have a piece of paper. You won't be a good programmer.
I suggest you read the documentation and try to understand PL/SQL. Then tackle the exams.
The documentation is on line. Good places to start are:
the PL/SQL User's Guide http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96624/toc.htm
and
Application Developer's Guide - Fundamentals http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96590/toc.htm
You should also check out the SQL reference http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/toc.htm , as that has lots of examples of SELECT and DML statements.
Good luck, APC

Local patch server confused again

Starting earlier this week, Solaris 10 clients that connect to our local patch server
only report that patch 121118-08 is required. Running `smpatch analyze' a week
ago showed many more patches. After 121118-08 is applied, another `smpatch
analyze' says `No patches required.'. One of these clients needed 139 patches before,
and now needs none! What happened?
Solaris 10 machines that don't go through the local patch server are behaving
normally. Restarting the local patch server didn't help. The local patch server's
URL is `https://getupdates1.sun.com/solaris/'. It hasn't been changed for some time,
and was working a week ago.

Here's a bit more data. Clearly it's the LPS that's messed up. As you can see above the LPS is getting an old current.zip but the LPS host actually gets the correct one when it goes to the same site to get the same file.
ljcqs152# pwd
/var/sadm/spool/cache/Database
ljcqs152# ls -l
total 592
-rw-r--r-- 1 root root 292708 Dec 17 04:25 https%3A%2F%2Fgetupdates1.sun.com%2F%2FDatabase%2Fcurrent.zip
ljcqs152# unzip -l https%3A%2F%2Fgetupdates1.sun.com%2F%2FDatabase%2Fcurrent.zip
Archive: https%3A%2F%2Fgetupdates1.sun.com%2F%2FDatabase%2Fcurrent.zip
Length Date Time Name
93 12-14-06 23:14 patchlist.properties
1859331 12-14-06 23:56 patchlist.delimited
1859424 2 files
ljcqs152# smpatch get
patchpro.backout.directory - ""
patchpro.baseline.directory - /var/sadm/spool
patchpro.download.directory - /var/sadm/spool
patchpro.install.types - rebootafter:reconfigafter:standard
patchpro.patch.source - https://getupdates1.sun.com/
patchpro.patchset - current
patchpro.proxy.host usgproxy.cnf.com ""
patchpro.proxy.passwd **** ****
patchpro.proxy.port 8888 8080
patchpro.proxy.user "" ""
ljcqs152#
ljcqs152#
ljcqs152#
ljcqs152# patchsvr setup -l
Patch source URL: https://getupdates1.sun.com/
Cache location: /jumpstart/patches/patchsvr
Web proxy host name: usgproxy.cnf.com
Web proxy port number: 8888
ljcqs152#

IPTC confusion - again

Hi folks,
since I am using LR 2. 3 (64-Bit edition in my case on Win XP 64bit edition) I encounter a problem with the IPTC handling in the XMP files.
Whereas formerly there only existed 1 keyword section, there are now two of them. The keyword list of both is identical.
Does it really make sense to have redundant information?I wonder if this is a bug or a feature.
The problem I do have with this: I am using a special software (Breeze Browser Pro) for years to manage the entire metadata stuff. Now that these two keyword sections exist, I am no longer able to work with the keywords reliable. Some changes are not visible to LR.
(Yes, I intend to not use LR for the metadata editing, since BBPro is much for flexilbe, easy to handle many files and much more quicker in
doing this part of the workflow.)
How does it look like in the XMP file:
Keywords 1
<rdf:Description rdf:about=""
    xmlns:dc="http://purl.org/dc/elements/1.1/">
   <dc:description>
    <rdf:Bag>
    --> list of keywords starts here <--
Keywords 2
<rdf:Description rdf:about=""
    xmlns:lr="http://ns.adobe.com/lightroom/1.0/">
   <lr:hierarchicalSubject>
    <rdf:Bag>
    --> list of keywords starts here <--
Are these two keyword section really necessary?
Thomas

... though I asked LR to re-read the metadata from the XMP file and they are definitely in the keyword-section starting with
<rdf:Description rdf:about="" xmlns:dc="http://purl.org/dc/elements/1.1/">
Hey Thomas!
I'm not sure why this is happening. The section you indicated is using the Dublin Core Metadata Standard which is generally compatible with all standards compliant software that reads/writes IPTC data. I assume BreezBrowser is among these.
The second section where the hierarchical presentation of keywords lives is more adobe centric.
You may have to try some experimentation to see where the process is breaking down. Make a few copies of some images with the metadata stripped out. One way to do this is to save for web as JPEG from Photoshop. Put these in their own directory. Import one to LR and give it one keyword. Open the other in BB and give it a different keyword. Then import them each into the other program and assign a third keyword. Something controlled like that to see where the ball gets dropped. Not using hierarchies or synonyms should keep both program concentrating on the section you indicated.
From all indication at both products' websites they support what you are trying to do.

Confused by the removal of aggregate/index tables in HANA

Hiya,
I've heard that HANA removes the need for aggregate and index tables like BSIS, BSAS, VRPMA etc.
Is HANA smart enough to do this? Or does Simple finance (sFIN) do this?
I mean if we were to replace our Oracle DB with HANA would the index tables no longer exist?
Or would we then need to implement simple finance to then remove the need for index tables?
Thanks in advance!

"HANA is just the DB."
I wouldn't say it's "just" a DB, but for the point we're making here you can say that SAP HANA is mainly used as a DBMS and not as a application platform.
"To remove index tables, aggregate tables etc you can activate business functions through SFW5 to improve specific lines of business."
That's not generally true. Some enhancements (like the VBOX removal) are delivered via enhancement packages. These change the software, but typically don't make a new product out of your system.
"Installation of sFIN, or S/4HANA contain more deeper changes to both the tables and ABAP code - that improve speed and efficiency."
Nope, these are actual new implementations. These are new programs that do similar things as the former NetWeaver programs. But they are newly written code.
This allows for much more radical redesign of functionality leading (hopefully) to even more improvements.
Coming back to your first sentence: the more radical the software changes the more tightly integrated the solution will be with SAP HANA. More and more function will actually run "in" SAP HANA, making it more than just the DB.
Ok, I hope this didn't increase the confusion again.
Cheers,
Lars

Confused with the internal table

Hello,
I am getting confused again by the usage of work space for an internal table.
Say for example I have a internal table itab that is defined as:
DATA:ITAB TYPE STANDARD TABLE OF Txxx.
Then I define a work space for the internal table.
DATA:WS_ITAB LIKE ITAB.
Now say for example, I would like to fill in some data to this internal table, can I do:
WS_ITAB-FIELD1 = 3.
APPEND WS_ITAB INTO ITAB INDEX 1.
where FIELD1 is a valid field in Txxx?
If not, how should I accomplish my goal? Thanks a lot!

Yes, you have the right idea. When working with work areas it is a good idea to define them like line of itab. This way, anytime itab changes, the wa will also be updated.
DATA: ITAB TYPE STANDARD TABLE OF Txxx.
<b>data: wa like line of itab</b>.
You can add a line to your internal table by filling the work area and appending to the internal table.
wa-fld1 = 'A'.
wa-fld2 = 'B'.
wa-fld3 = 'C'.
append wa to itab.
You can insert into a specific index by using INSERT.
Insert wa into itab index 1.
Regards,
Rich heilman

Starting to like it...but, really confused concerning ingest. Need thoughts.

I have made the switch from 7 to X and will remain committed to X but I really need some help understanding bringing media in. First some background on my workflow and media type.
I shoot with the JVC 700U camera in 720p. The format is XDCAM EX at 35 mbps. I produce a football highlight program which is an hour in duration. Been doing this for over twenty years and have made a decent living at it. It is broadcast on local cable and streamed on the web.
Here is what I really need to understand before I can feel comfortable with X. I bring in the footage from an SDHC card. Do I optimize the media? Someone said that even if I check that box that FCP X will not transcode that media if it doesn't need to. Really confused on that. I have found that I should not analyze the media for shake. That takes forever! Now, If FCP X does not transcode, why is the file a ProRes 422 when I export the timeline? Confused again. And, that 422 master ofcourse is huge. I would really appreciate if I could get some folks help me on this.
Also, I used to export a reference movie in FCP 7. That made things quicker when encoding to H.264 file for the web using Compressor. No more ref movie?
Like I said earlier, the interface is starting to grow on me but I really need to fully understand the ingest process.
Thanks for any and all input. ( pardon the pun )
Cheers.
Tom

Checking the box for optimize media transcodes all imported media to ProRes 422. This is desirable if you have an underpowered machine or a lot of difficult to handle formats. Leaving the box unchecked will only transcode media that FCP X can't play natively.
In the first case, FCP X will allow you to work with the native files until the transcode is complete. Then it will seemlessly switch the links over to the Pro Res files. Transcoding takes place in the background but you'll be unable to quit FCP X until it's finished, or you suspend it. The only time it doesn't transcode is if the original file is already Pro Res.
When you export from FCP, you have several options. If you want a full raster master export, you can use the Export Movie option (CMD+E) to export as Pro Res or H264. If the project wasn't transcoded, you'll also have options for the codec that you were editing in. For example, if you were cutting DVCProHD footage, you would have that as an option in the Export Movie presets.
Otherwise, you can choose: Send to Compressor for all other compression formats. Send to Compressor creates a reference file and loads it automatically into Compressor. Then you can apply whatever preset you wish and transcode it. Then go back to Final Cut and continue editing.
Do not use the Export with Compressor Settings choice as it will tie up FCP X while it's transcoding (unless you hit the Send to Compressor button in which case it's the same as the above choice).

How can I restore my iTunes library via Time Machine after an erase/install and upgrade to Snow Leopard?

Actual problem:
I reinstalled all my programs that I need without a hitch. Meanwhile, I've been trying to recover the few files (mostly music) I actually store on my computer's hard drive as opposed to on my external HDs. I use one external HD for my graphic files and the other is strictly for Time Machine backups. I tried to recover my iTunes music, but I got a message that says: "The file: "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes." I restored (I thought) my iTunes library Username/Music/iTunes." Additionally, I was going to upgrade to Mountain Lion, but I have seen that there were issues with Lion and iTunes libraries so I'm a little wary of this.
Excuse the long explanation, but I figure the problem may possibly be in the details of the weeks prior this problem:
I have recently been having issues with my iMac. I brought it in to see a Genius twice within the past month and they couldn't seem to find the problem. (It would restart Finder of it's own accord while I was using Adobe CS programs) I figured it was worth backing everything up via Time Machine and doing a complete erase/install/factory reset. I did so and had a problem again, and brought it in again, third time. The Genius did another diagnostics tests and found nothing and said my erase/install probably did the trick, but time will tell. I am, after the erase/rewrite and upgrade running Mac OS X 10.6.3 and previous to this was still running Tiger.

So, I didn't update iTunes and the rest of it after installing Snow Leopard. My stupidity, I figured that the OS was more up to date than the one I had previously so that all the programs that come with it probably were more current than the ones I was using. However, now that I have updated all my software, I am still getting the same message from iTunes that I was previously. I cannot open iTunes at all, same "The file: "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes." message. I'm confused again. Checked a few other threads and whatnot and cannot seem to figure this out.

Program settings advice for CS3 Prod Premium on Vista 64-bit

I need advice to optimize my PC for CS3 Production Premium after a clean re-install of Vista 64-bit. I am on a new HP Pavilion d5000t desktop with Quad core 2.66 and 8GB RAM. I got the PC in August, and began having problems from the start. I don't know if it was the computer or CS3.
I was having performance issues and numerous freezes. Failures were mostly in Encore, but also in the other CS3 apps. I got no error messages telling me what was wrong. They simply stopped working" and forced shutdowns. I did plenty of Vista's diagnostics tests but never isolated the cause. After doing a couple of editing jobs, I had cache folders and previes files everywhere.
I now have the computer back to factory condition. It has some neat features and programs, but I probably don't need a lot of it. Norton Security, games, Windows Defender, consumer photo and video apps, and others. However, I am afraid to uninstall or disable anything because I won't know what I'm doing. I had existing jobs in progress before I backed up my files onto an extarnal drive.
I am about to re-install CS3 and restore my backup. I need help setting up scratch disks and other settings. I have no idea how to set up Version Cue or Bridge for file management. The factory system drive is a 2-drive RAID 0 1TB total and is probably the most capable, but I don't know if I should store all my video on there. It used to be you had to separate the system drive from the content storage, but I don't know if that's still the case. Apart from the factory drives, I plan to install two more internal 250 GB SATA drives, an external 1 TB Buffalo drive with triple interface. I also have a MyBook and a Maxtor OneTouch 4 external, both 500 GB. I work primarily with MiniDV video.
Please somebody send me a good configuration plan so I won't get confused again. Thanks.

Please reference my previous post:
http://www.adobeforums.com/webx/.59b6e815/0

Unable to install MS-Office 2011 Update 14.1.4 on 10.6.8

Hello,
I've got some trouble installing the actual available Update 14.1.4 for my Office 2011-Home and Student Editon.
When I try to install I receive the Error-Message "Office 2011 14.1.4 cannot be installed on this volume. For this Software, Mac-OS Version 10.5.8 or higher is required".
(Similar Problem during install the actual update for also installed Office 2008: "Cannot be installed, Mac OS 10.4.11 or higher...")
I am confused.
In asked at Microsoft "Support" (ha, ha ha ..) and
1st) received a Email containing the Software AppleJack which fixed some minor issues, Installing of the Update still does not work
2nd) received an Email from Microsoft "...cannot help you, there is an error in the Operating System, pls contact Apple."
I am confused again...
The popup "About this Mac" shows the correct version 10.6.8, Update does not find anything to be installed.
This f*cking software from redmond is the only piece of software making some trouble, all other applications wors quite well.
any hints?
My iMac (C2D 2.66, 4 GB RAM, Early 2008) is running under 10.6.8, all available Updates from Apple are installed, there are no hacks, no partitions, no Preview-Versions of Anything ... it is a plain vanilla iMac.
(Sorry 4 bad english, writing from germany...)
Thanks!

Hello,
for other people having the same problem:
Just delete die file
/Macintosh HD/System/Library/CoreServices/ServerVersion.plist
and the Install whill work again.
I dont know how this file find the way to my mac.... it's a stand alone system.

New features for BSP since release 7.0

Hi all!
Could anyone just tell me what exactly are the new features since the 7.0 release for BSP-Programming (if any exist) or tell me where to get that information (am a little confused again searching through the SAP-Site-Universe).
Thanks in advance and regards
Jan

Hi Jan,
there aren't any new features for BSP in 7.0, as there is no further devolpment for the BSP framework.
Regards,
Rainer

CS5 and Other Programs

I asked this in another discussion but shouldn't have because it was under the wrong topic. Hopefully the answers here can help myself and many others. I'm trying to build a business website, I'm using dynamic data because I don't feel like building the entire corporate inventory of around 20,000 items one page and link at a time.
I'm aware that there's some issues in trying to combine DW and VS 2010 in certain regards. I'm also aware of various other IDE's such as Netbeans.
Ok, if I built a SQL (or MySQL) database using something like C#, could DW read from it? I don't need to transfer anything other than the structure (table set up, contents, and the entity relationships). So if I filled in about 200 products worth of information in VS for testing purposes, could Dreamweaver read that and could I make it do query statements without compatibility popping up? All DW needs to do is read and query it, as far as I know, that doesn't need anything like stored procedures from VS. Secondly, if I updated that database using VS, would I have to rebuild my DW connection, if not, how do I do it?
I've found the PHP code to make Dreamweaver display dynamic data, would this interfere?
That leaves the other question. Netbeans has PHP editing capability, if I wrote the code in Netbeans, I could just copy and paste that into DW, right? I just want the debugging feature that won't make me guess at the problems, and netbeans shows me right in the code where it's wrong.
Any answers welcomed and appreciated.

Iphp, I think you are confused (again).
The form script, (that was not posted in this post, yet you bring it up), was in a turorial that I wrote, and again (third time I think now it has been brought to your attention) has the following langage in it.
""A couple of other points, there is no validation on the form you see here, so it opens the door to spam and other attacks. A submitter is not required to input an email address and can input anything they like with the form as written. There is no security on this form or script, if you were to add a database to this script, it would be very vulnerable to malicious attacks. It is strongly suggested you research form security, in particular if you are adding a database.""
Now I am unclear if it your reading or comprehension that you are having a problem with, but it seems clear to me.
The tutorial link is http://www.paulgdesigns.com/learncontactform.php
And again, in your failing to read, there was a follow up tutorial called Securing your form, (as well as a few others) which is at http://www.paulgdesigns.com/secure.php, which deal with email injection attacks. Please note it deals with email attacks, not database attacks.
Now for some reason, I have yet to see you post anything, other than critisism, regarding security on forms. You had mentioned in one of your post that a single line would make the form scripts safe, are you delusional, do you really think that one line of code would secure anything on the internet?
And no, you still can not hold my hand...
Gary

Connecting AirPort Express using Fire Wire

Hi, can't see this posted anywhere else. Have been running my MacBook Pro off my AirPort Express quite happily for some time. However recently purchased a Sonos S5 that needs to connect to my wireless router via ethernet. Only problem is the Airport Exp. only has the one ethernet port. So figured I could use the FireWire connection for the Airport/Modem and then the ethernet for the Airport/Sonos.
Only problem is I need to configure the FireWire in System Preferences and despite my attempts at guessing configuration I have no idea what I am actually doing. Not sure if it's an easy answer, but if anyone can help with config I would be very grateful.

Hi, thanks for the response and sorry that I am unclear - not my area of specialty.
Currently I have my airport express router that connects to my modem via ethernet.
I purchased a sonos unit that streams music over the internet and plays it through the unit. It uses its own base station/router to connect to my wireless network so the main unit then becomes wireless and I can move it any where in my house.
As I understand this base unit needs to connect into my router via ethernet. The problem is the Airport Express has one ethernet port and one fire wire port. I was hoping to get around this by using the fire wire to connect to my modem, and then that would leave the ethernet port free for the Sonos base unit.
In case I have just been confusing again the manual for the Sonos refers to the ethernet connection 'use category 5 ethernet cable to connect to a router, computer or additional network device'
This might not be possible, just assumed fire wire would work but no idea how to configure. Possibly it will involve me having to buy a hub (or extreme) to get multiple ethernet ports.
Thanks for your help - I am (obviously) lost here so any advice is great!!

Im confused again

Similar Messages

Maybe you are looking for