Im making a photo slide show using imovie. how will i make a dvd copy that can play in both pc and dvd player.  i dont have an idvd anymore. m using a mbp early 2011 osx 10.8.5

im making a photo slide show using imovie. how will i make a dvd copy that can play in both pc and dvd player.  i dont have an idvd anymore. m using a mbp early 2011 osx 10.8.5.
after making the photo slide show, i clicked share>export movie.  after which i burned using toast. the file became a .mov.  i tried playing it in my mac and it worked. my fear now is will it also play in a regular dvd?... i read from google that mov files won't run in dvd players.  what format should i convert it to so it'll play in a dvd player.  can you suggest a faster way i can burn my projects for it takes me almost an hour to export.  im going to make 28 slideshows for my kids in school. *=( if i need to do this process 28 times, i may not be able to finish it on time.  please suggest a software or an alternative as to how i should do this... m more comfortable using imovie than iphoto.  thanks and i hope to hear from someone soon *=j

Thank you QuickTimeKirk...used toast to burn project... my project was in .mov, i tried to play it a dvd player, it did play... will try again tomorrow using another dvd player just to be sure it'll will really work with dvd players.  thank you again for your reply *=)

Similar Messages

  • Making a Photo Slide show with Final Cut Express

    Hello, I am trying to incorporate pictures into my timeline mixed with video, how do I add movement to the pictures similar to how a photo slide show would look ?...Thanks in advance for your help!

    See if this helps at all
    http://www.fcpbook.com/Motion_Control_in_FCE.html

  • Some videos are not showing in Apple TV playlist after upgrade to 6.0.  Can play on Macbook itunes and using airplay to Apple TV.  Anybody else have this issue?

    Some videos are not showing in my Apple TV playlists after upgrade to 6.0.  They were there prior to upgrade and I can play on Macbook itunes and also using using airplay to Apple TV.  Anybody else have this issue?

    Ok, so I'll try again.  Thank you for the idea of looking in Home Videos, which is where all my "lost" videos are listed.
    Is there a way to get them to display under their appropriate genre in the Movie section, which is where they all were listed prior to the os6 update?  It does me no good to have hundreds of movies categorized in iTunes via a genre only to have them appear in Home Videos on ATV.  These are not "home movies." They are legit mp4 movies that worked great under v5.

  • Using iMovie, how do you transfer your project so that it becomes a movie with a .mov extension?

    I have a few projects.  Some of them have ended with a .mov extension, but others have not.
    Not sure if i did anything different, but how would I get a .mov extension on a project I already created?

    No, transferring between machines does not work.  You need to install using installation files.  You can download thru the following and use your serial number to activate...
    CS5.5 - http://helpx.adobe.com/creative-suite/kb/cs5-5-product-downloads.html

  • How do I burn an imovie to a DVD so I can play it on my TV DVD?

    I burned it onto a dvd but it doesn't work because the file isn't recognized by my dvd player.  It's a MOV file.  I don't know how to save it in a format my dvd player will recognize.
    Thank you

    I don't know how to save it in a format my dvd player will recognize.
    I do!
    Use iDVD.
    IDVD is specifically designed to work with iMovie.
    With iDVD you can easily and quickly create DVDs with menus and graphics almost on the level of what Hollywood can do.
    IDVD is easy to get. It is available on disk ONLY as part of iLife 11.
    IDVD is a wonderful piece of software and well worth the low cost of $40.
    http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
    http://dealmac.com/lw/artclick.html?1,527850,1872219

  • I need to do non-constrained crops for Ken Burns effect in photo slide show

    I am making photo slide shows in imovie '09. I understand the Ken Burns effect and how to set a start and an end point. I want to use the effect on vertical or portrait mode photos. i would like to have the entire photo displayed in portrait mode and have it zoom in a bit. The problem is The start and end points seem to only be horizontal or landscape mode. I can't ever get the entire image selected. How can I do this?
    Thanks,
    Tim

    You need to add the letterbox (black space) in another application. iMovie's Ken Burns effect will not do it for you. You can do it in Photoshop if you like.
    However, there is a way to do it in Automator, and you can do hundreds of vertical photos very quickly. That is the way I do it.
    Here is more detail:
    There is also a quick way to pad your images without using Photoshop. This method will pad hundreds of images in just a few seconds.
    You do it with a tool that comes with OS/X called Automator. It should be in your Applications/Utilities folder.
    Automator is basically a workflow tool. It allows you to string together commands and actions into a workflow and then execute the entire sequence at once. If you have Snow Leopard, you can even add these workflows to your contextual menus that come up when you right-click.
    There are many workflows that would work to pad your images. Here is an example:
    In Automator, start a photo workflow and drag the following actions into the workflow from the Action palettes on the left.
    You should have something like:
    1)Ask for Photos (You must select one or more photos and hit Select - you can make this easier by putting them in an album beforehand)
    2) Copy Finder Items (give it a folder to copy to- so you can find them easily)
    3) Pad Images. (put a check mark in "scale image before padding" Pick the pixel dimensions of your project...like 640x480 or 960x540. or 1920x1080
    Hit Run and a dialog box will come up asking you to select photos. When you are finished, press SELECT and the Automator script will keep running.
    Then at the end you should have padded images in the folder you created in step 2.

  • Help! during my photo slide show/some screens are green and/colored-why

    This is my first photo slide show in IMOVIE 8, when I go to "play" my slide show, some photo are NOT showing up INSTEAD a "colored" screen comes up. WHY? Not sure what I did wrong.

    I to have the same problem. It is very annoying, I name my photos so that they would be in a specific order or grouping.
    It appears that a programmer slipped? When I write code to copy files I would sort the list by filename as done in OS versions prior to 4.0.
    The order of the photos is now in the order that they were added to the folder which is then sync'd to our pods.
    I for one am not willing to remove and rebuild my whole photo library re-adding the photos to the sync'd in the order I wish to see them every time I wish to add more photos.
    It is a disappointment, but I have not been online in a couple of weeks and maybe Apple has caught on and put filename sorting back into the code.

  • Moving iPhoto slide show to iMovie

    Using iPhoto, I created a slide show from a series of photos. I used the Ken Burns effect to add motion to the photos and got everything just right. I wanted to export or move the slide show to iMovie so I could add titles between certain of the photos in the slide show. I found an option to export to iDVD but not iMovie. Shouldn't I be able to move the slide show between iPhoto and iMovie? Eventually, I'll want to move my slide show from iMovie to iDVD, but I want to add the titles between the clips first. Does anyone have any advice regarding this matter?

    Using iMovie HD 6, IMO it gives the user much better control over clips, stills and adding audio, you click on a still clip and then click on the Show photo settings button at the bottom of the Media pane. A translucent pane will come up where you can set the KB effect parameters.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.≤br>
    Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • After EFI Firmware update 2.3, MBP Early 2011 will not boot. During restart it all went wrong please help!

    Hello,
    I've done an ample amount of Internet research to find an answer to this problem however nothing yet found is quite like this. I will start from the beginning.
    I am traveling through Europe, and I normally live in California. When I arrived in Ireland my MBP early 2011 15 inch, began crashing constantly when I had several tabs open on Chrome and maybe one or two low CPU/Memory using applications, nothing the 8gb RAM &750gb hard drive can't normally handle. Thus I began trouble shooting.  I ran disk utility once started up and repaired both disk and permissions. Still crashing. It didn't seem like it had anything to do with a kernel panic shut down, I never would receive the usual message indicating so. After that I did an SMC reset. It was still crashing. I then upgraded the OSX from 10.8 to 10.8.4 believing it could help. It did momentarily, but then crash again. (When it crashes screen goes black suddenly and upon pressing power button does a regular boot on my single partition). I decided attempting to repair using the Internet recovery option but it appeared my MBP had not yet have it installed, so I downloaded from Apple and began installing. Here I made a mistake, I unplugged the power source as it was restarting. When the gray screen and apple appeared, the loading bar shows up as it says it will when installing the update, but when the bar fully loads it crashes every time. I've tried starting in safe mode, which then loads but never goes further (I let it stand for two hours such as that and nothing). Then I decided to allow the MBP to fully charge overnight to give it time and charge. This morning the problem has stayed the same, even with power source plugged in. Please help I need this to work.
    Thank you and please ask any questions!

    Your constant crashing problem is probably some type of hardware fault which no update can fix. Doing the 10.8.4 update and then the firmware update just caused further problems. you need to take thr system to a apple store to be diagnosed and fixed if cost effective.

  • Photo Slide Shows - inconsistent quality

    Last summer I burned a very complicated idvd photo slide show using digital photos in RAW format from my Nikon D70 and the slides looked really great. I just tried to do it again - same camera, same lens, still in RAW and the photos - while looking good during construction and test runs, come out very fuzzy on the burned dvd. I'm really puzzled. Can anyone explain what I might have done differently to yield such different results? [and how I get back to the good results?)
    iMac   Mac OS X (10.4.9)   different photo quality in different burns

    Tom,
    I hope you have read Preparing images for DVD slideshows at http://docs.info.apple.com/article.html?path=iDVD/6.0/en/17.html
    The best you can do is get about a 640x480 equivalent image on a DVD - that's about 0.3 megapixels - so there is NO way you can match the image quality of your high resolution digital images.
    Despite their names, you will get slightly better image quality using the 'Best Performance' mode than you will with the 'Best Quality' mode. Perhaps you used BP before and BQ now.
    I have used FotoMagico for creating slideshows and feel I got better image quality than iMovie or iDVD and some people like Photo to Movie.
    F Shippey

  • Trying to overlay photo slide show over video

    Hi, I'm relatively new to iMovie but couldn't seem to work this one out myself.
    I've have video of myself talking, and without disrupting the audio track, I would like to overlay a photo slide show of still images over part of my dialog, but can't figure out how to do this. Ideally, the video would fade out/fade in to the photo slide show, but the audio track would remain constant, and then when the photo slide show is completed, fade out/fade in to the straight video again.
    Anyone know how to do this?
    Thanks!

    Select the clip with the audio and use Clip>Detach Audio. You have to put the stills on the main video track because you can't add transition to stills or clips on the overlay or B-roll track. Once the audio is separated you can replace the picture with stills and start building your slideshow on the video track.

  • What is stepbystep procedure to make finest quality slide show in iMovie?

    After spending many hours of trial and error, like many others it sounds like, and after much time reading through this forum I have concluded that maybe one of the experts on iMovie, and this recurring question, could come up with a step-by-step guide on how to prepare photos for a high quality slide show in iMovie starting from downloading the digital image from the camera.
    I find myself very confused as to how to prepare the photos in Photoshop (step by step here would be great also - how do you format the photo, size, pixal ratio, resolution, RGB or CMYK, ) and how to import them into iMovie while maintaining the highest quality possible. Then how to export to or import into iDVD. I think anyone who is attemping to produce a slide show wants to end up with a visually pleasing final product. No jaggies or blurriness. It seems to me that there should be, from start to finish, a fairly simple guide that would make it easier for all of us.

    Maybe it's me, but... scoobie... i don't think your reply has anything to do with her question lol. I believe she's saying she is having trouble figuring out how to do something, not that the program is crashing.
    Anyway, I'm starting a similar slideshow project. I think it's easiest to simply edit the photos in iPhoto. Photoshop is on a different level from iPhoto and obviously has capabilities iPhoto lacks, but I think it should be fine for just editing digital photos.
    One of the things you said was "how do you format... resolution"
    I don't think iPhoto can change the resolution of a photo like photoshop can, but since you want to make the FINEST quality slide show I assume you'd want to scale the resolution up... and although photoshop can do that, I don't think you'll see a significant increase in quality. It won't look anything like if you had actually taken the photo at a higher resolution.
    As far as importing pictures into iMovie goes, that should be pretty easy. If you click on the "media" button in iMovie, and then click on the "Photos" tab on the upper right of the window, it will display your iPhoto library the same way it would display it in iPhoto (organized by albums). You can then drag whatever photos you want to include to the "timeline" at the bottom of the screen.
    I'm not sure what to tell you about pixel ratio and RGB vs. CMYK....
    The last step, exporting to iDVD is just as simple as adding pictures... just click on the "Share" menu at the top of the screen and select "iDVD". What you do from there depends on what kind of final product you want... and I haven't actually used iDVD so I would just be guessing on that part lol.
    Also, I suggest going here: http://www.apple.com/ilife/tutorials/imovie/index.html and looking at the tutorial. I viewed most of the movies there and they were helpful.

  • 1080p render for mbp early 2011?

    im going to get into the youtube video makeing business with an intensity extreme capture card which connect to my macbook pro through thunderbolt
    i remember once i used to render a few videos i think it was imovie does anyone know the early mbp early 2011 is capable to render a 1080p video because i remember i once rendered a few videos in imovie and it owuldnt let me pick 1080p is it because mbp early 2011 cant handle it or something?

    Well, I ran the progran anyway, TechTool that is and looked for updates within the program and it said I was running the latest version 3.1.3. I ran the program and it crashed. I was the crash test dummy.
    JAW

  • Can I make a slides show with imovie(8,0,6)

    Can I make a slides show with imovie (8,0,6). If so, how?

    Hi
    Yes and No
    No - if Quality is important AND You want a DVD as result - no iMovie'08 to 11 can handle or export - Interlaced SD-Video to any DVD authoring program - When going from Event's to Project every second line in the Picture is lost and this will be a noticeable quality loss in the final DVD
    YES - If You don't want a DVD -
    • Just start a new Project
    • Import Photos from Media button / Photos
    • Insert transition of choice
    • Insert Audio at Your liking - I convert all to .aiff and not use any .mp3 or from iTunes directly (converted they work OK)
    If DVD - Then use
    • iMovie HD6 - or -
    • FinalCut any version
    • FotoMagico™
    • iDVD - BUT this is limited in several ways
    - max 99 photos per show
    - one transition possibly
    - audio - one audio tract (but this can be created outside iDVD to contain more than one tune
    Good Luck
    Yours Bengt W

  • In iOS 4, you could make separate photo slide shows with separate songs.   In iOS 5, this has changed. Now only 1 song is allowed at a time. It will not save separate song selections for each slide show.  Is there any way to fix this? This is something I

    In iOS 4, you could make separate photo slide shows with separate songs.
    In iOS 5, this has changed. Now only 1 song is allowed at a time. It will not save separate song selections for each slide show.
    Is there any way to fix this? This is something I use every day.
    I am on an iPad 2, 32gb, wifi...
    Thank you

    My Photos app works the same on iOS 5 as it did on iOS 4 i.e. I can have a different track for each album. When I select a track for a photo album I then start the slideshow so that it shows the first couple of photos with the track playing - I'm not sure it's necessary to start the slideshow but I always do and it remembers that track for that album.

Maybe you are looking for