Im tring to authorize my toshiba PLEASE help!!!
It's a toshiba with windows 8 and the support thing said to go to the store menu, but i dont seem to have it.
There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Then you'll find the control in the Store menu:
Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:
Similar Messages
-
Authorization challenge. Please help.
Songs purchased via iTunes on an old computer won't play on my new computer. Already authorized the new computer. I don't have the email anymore that authorized the old computer so I'm unable to re-authorize those songs. Please help.
Error -50 usually has to do with Firewall, Web Accellerator, or Anti-Virus software settings. This article should help you:
iTunes for Mac: Possible iTunes Store errors
http://www.info.apple.com/kbnum/n93459 -
Authorization blues. Please help
Hi I have a few macs. My latest is a macbook pro. Itunes works fine but I can't authorizr it to use the itunes store. According to me account info I have used 3 of my 5 authorizations but whenever I goto the Store menu and click authorize this computer is give me an 'Error -50 Has occured'. And I can't buy music or play music I have purchased.
Please helpError -50 usually has to do with Firewall, Web Accellerator, or Anti-Virus software settings. This article should help you:
iTunes for Mac: Possible iTunes Store errors
http://www.info.apple.com/kbnum/n93459 -
Authorization Issues - Apple, please help
There have been several posts regarding users not being able to play their iTunes music due to authorization issues. Solutions have been provided, including the following:
1. Deauthorizing the account several times until the following message appears "This computer was not authorized. To authorize this computer, to play a song or video you have purchased using this account."
2. Deleting the "SC info" folder.
3. Authorizing the music using the original account (File > Get Info).
Nothing seems to be working. I've contacted Apple support, and they have been more than responsive and helpful, but they keep asking me to do the same things over, and over.
Everytime I enter my account authorization info, I get a message indicating that the computer is now authorized...however, the music still won't play.
I have now gone 3 months without being able to solve this issue (I've tried everything in the forums), and I am about to give up. Unfortunately, this also means flushing over $300 down the toilet. I still have all the files, so I am not asking to download them again (they are on my hard drive). I just want a fix...Hi,
For the BW consultant use the following objects :
B_ALE_MAST
S_ADMI_FCD
S_APPL_LOG
S_ARCHIVE
S_BDS_DS
S_BTCH_ADM
S_BTCH_JOB
S_BTCH_NAM
S_CTS_ADMI
S_C_FUNCT
S_DATASET
S_DEVELOP
S_DOKU_AUT
S_FIELDSEL
S_FOBU_MTH
S_GUI
S_IDOCCTRL
S_IDOCDEFT
S_IDOCMONI
S_IDOCPART
S_IDOCPORT
S_LDAP
S_LOG_COM
S_OC_DOC
S_OC_FOLCR
S_OC_ROLE
S_OC_SEND
S_OC_TCD
S_PROGRAM
S_PROJECT
S_QUERY
S_RFC
S_RS_ADMWB
S_RS_COMP
S_RS_FOLD
S_RS_HIER
S_RS_ICUBE
S_RS_IOBJ
S_RS_IOMAD
S_RS_ISET
S_RS_ISOUR
S_RS_ISRCM
S_RS_MPRO
S_RS_ODSO
S_RZL_ADM
S_SCD0
S_SCRP_ACT
S_SCRP_FRM
S_SCRP_GRA
S_SCRP_STY
S_SCRP_TXT
S_SPO_ACT
S_SPO_DEV
S_SPO_PAGE
S_TABU_CLI
S_TABU_DIS
S_TABU_RFC
S_TCODE
S_TMS_ACT
S_TOOLS_EX
S_TRANSLAT
S_TRANSPRT
S_TWB
S_USER_AGR
S_USER_AUT
S_USER_GRP
S_USER_PRO
S_USER_TCD
S_USER_VAL
S_WFAR_OBJ
S_WFAR_PRI
For users :
S_ADMI_FCD
S_BDS_D
S_BDS_DS
S_GUI
S_OLE_CALL
S_RFC
S_RS_COMP1
S_RS_FOLD
S_RS_HIER
S_RS_ICUBE
S_RS_ISET
S_RS_ODSO
S_SPO_DEV
S_TCODE
S_USER_AGR
You also need to give the end user objects to the BW consultant. All of these objects have activities and values that need to be populated.
Cheers,
Kedar -
I am downloading the memory card from my camcorder into my MacBook Pro with Retina display. It usually popped to the file called AVCHD then CLIP to show all the videos. But not this time, it automatically changed to BDMV. I do not have idea how this happened while I left my notebook on and I was away for a couple of hours then back to the living room to work on each video as to type name of file etc.
Now, I cannot even open them into CLIP because I am still getting BDMV with a popped sign that said BDMV can't be opened because it is from an unidentified developer. (I do not even understand what this is supposed to mean??) also with the bottom message that stated "Quicktime Player created this file yesterday at 1:52pm" I am like uhhh how can QT player do this without my authorization??
Please help me how to solve these and get all of my videos back that I saved in my camcorder. Let you know that I tried to insert the memory card back into my camcorder and all these videos are gone. Now I am having a HUGE headache because of this!!
What should I do now???HI,
Did you ever figure out how to get them back? The same thing happened to me yesterday. I was able to open the file in VLC media player (you can download this app), but the file had been corrupted. It was only the last clip I had recorded, all the others were lost. Even the clip that will play is messed up -
Question on security in ABAP. Please help!
Hi Experts,
I have a question on security in ABAP program.
I have a ABAP program which has a transaction attached.
I have added authorization check in ABAP program(Progran level security).
I have also attached the authorization object to the transaction.(Transaction level security)
If an end user runs the transactionm, then which authorization check will fire first? Will it be transaction level?
If I have web enabled my ABAP program via SICF (in other words, ITS). Then when I try to run my ITS service in the browser will the transaction level authorization fire? or Will the program level authorization fire?
Please help me understand this security aspect.
Thanks
GopalHi gopalkrishna,
1. if an end user runs the transactionm, then which authorization check will fire first? Will it be transaction level?
Yes, transaction level first !
2. In ITS scenario also,
a) first tcode level,
b) then, program level
regards,
amit m. -
Question on security in ABAP program with ITS. Please help!
Hi Experts,
I have a question on security in ABAP program.
I have a ABAP program which has a transaction attached.
I have added authorization check in ABAP program(Progran level security).
I have also attached the authorization object to the transaction.(Transaction level security)
If an end user runs the transactionm, then which authorization check will fire first? Will it be transaction level?
If I have web enabled my ABAP program via SICF (in other words, ITS). Then when I try to run my ITS service in the browser will the transaction level authorization fire? or Will the program level authorization fire?
Please help me understand this security aspect.
Thanks
Gopal<i>I have added authorization check in ABAP program(Progran level security).</i>
i assume you have coded call authority within the program.
<i>If an end user runs the transactionm, then which authorization check will fire first?</i>
if he calls the transaction, then first authorization attached to the transaction will be checked.
but if he executes the program attached to the transaction, then the authorization attached to the transaction dosent help here, the one coded in side the program is checked.
<i>If I have web enabled my ABAP program via SICF (in other words, ITS).</i>
it depends,
if you are calling your transaction like
webgui/?~transaction=<tcode> then first tcode level authorization.
if you generate the templates for the program and callign the same, then i guess its progam level. (i need to check this)
Regards
Raja -
My computer(A toshiba) crashed and when I bought a new computer(a Mac), my previous apple ID does not word and I was only able to get songs that I bought in 2004. I am unable to authorize my account to get to songs that I purchased recently. Please help.
Steve Taylor1 wrote:
If you have exceeded your allowance of 5 machines then Apple will not allow you to authorise additional Computers. If you still have access to your old toshiba fire it up de-authorise it and then try again with the new computer.
While this won't help if you are having password problems, I did want to point out that you do not need to access old machines to de-authorize them. Once you are signed in at the iTunes store, access "my account" by clicking on your username in the top navigation bar. Then "manage devices". You can remove any old machines that way. -
okay so my cousin downloaded a bunch of songs to my ipod and i couldnt listen to them so i decided to sync my ipod, i thought everything went well but i guess i was wrong because i saved all my apps to my laptop and my music also. but now i cant get any of it back on my ipod it says i have to authorize my computer so when i go to itunes and attempt to authorize my laptop it doesnt give me that option ive tried everything someone please help thanks...
Open itunes, Click the word Store at the top of your computer screen
On a windows computer, if it does not show, then click Alt-S -
Toshiba Satellite L555 freezing up! (Tech Head Challenge) Please Help!
It's been happening lately. My Toshiba Satellite(windows 7 home permium 64 bits) has been freezing up with multiple, thin, multi-colored lines with a noise similar to when a sound track on a CD sticks or freezes and no mouse response or any kind of response at all. I have to press and hold the power botton and force it to shut down. I noticed it does this more often when I try to play a video game,virus scan,video call on Skype and less frequently on youtube (youtube might just be a coincidence). Sometimes after the computer restarts and I virus scan or Skype then I have no problems. I think it happens when I virus scan or skype when I have both multiple firefox and google chrome windows open at once but I cannot be sure. I've tested the theory a few times but it's inconclusive however I am confident that virus scans or video game are most likely to trigger the freeze even if they are the only thing I have open on the screen.
Sometimes I get that message in the blue box that says "Windows is shutting down to prevent damage to your computer....." The strange thing is that after I force it to shut down if I try to restart it immidiately then it will boot. All the lights will come on except the orange one in the left hand corner,the screen does not come on and windows does not load. If I leave it for 30 minutes or sometimes less after it crashed then it will restart .The funny thing is that I had this problems about 8 months ago when I tried playing a video game called A.V.A. About 2 minutes into play it would freeze with the same noise I mentioned earlier.I repeatedly tried to play the game and it happened every single time and everytime I force shut down the laptop and try to restart it right after then windows will not load and the orange light does not come on. I removed the game and reinstalled it and I never had that problem again.Since I got the laptop it has randomly restarted like 4 times and I've had it for about 1 year and 2 months but now it is just freezing up (mostly) or I get that message in the blue box. At around April of this year the game stopped working. I keep getting error reports when I try to reinstall it and my windows no longer recongnized the digital signature of the company that made the game.
I'm not sure if it's overheating,I have a hard drive or motherboard problem or if it's a software problem. I've tried:
System Restore
Defrag
Disc Clean up
Non of these have helped. I've also tried using SeaTool for Windows to try to look for errors in my hard drive and it has not found any. I've also done that thing where Windows,with the black screen and white text, check through your files for errors and corrupted stuff but that report says that it hasn't found any errors at all. My computer has no slow down in performance that I can notice. It doesn't take long to start up nor does it take long to shut down. I don't get random error reports or anything like that. It works fine except for the freezing bit.
The fan seems to be working just fine and the latop doesn't get that hot. Sometimes it freezes when it's barely warm to the touch and other times it would be significantly warmer but it would not freeze even if I have multiple firefox and googlechrome windows open. Before all of this when my game was working I use to play for hours with the exhaust at the side significantly heating up the desk and the computer would run perfectly without problems except that brief period I mentioned earlier where the game froze 3 minutes in to actually playing the game,reinstalled it and solved the problem. Yesterday it froze on me while I was on skpye and today it froze on me about 5 minutes after windows log in on youtube without the computer getting hot,just barely warm. I just don't get it!
I've try using a vaccum to clean the vents without opening the computer. I've removed and reinserted my memory just incase they were loose and I've also removed and reinserted the hard drive to be sure that it was in properly and that has not stopped the problem either.
N.B. I did do a virus scan with a trial version of Kaspersky Pure that I installed less than a month ago and it does say that I have a virus called "virus heur trojan.script.iframer" and a medium and high risk events. I've tried to remove or quarantine them but nothing happens and when I scan again with Kaspersky Pure or Kaspersky Virus removal tool they find no viruses BUT the trojan report is still there with the option of removing and quanrantine.
As I've said before I've seen no slow down in performance and it works just fine except for the freezing and the blue box message. The only noticeable problem is that both firefox and googlechrome have been just a little,little bit buggy in that sometimes I would have to close down a window and reopen it again because the pages were not loading but that's only on Facebook and a few other websites and I thnk that's because of my internet connection. As I said, I've gotten no random error reports,not from windows 7 or my browser.
Please help!It sounds sort of like it could be related to overheating, but on the other hand, you specifically said that it doesn't always feel warm. If you're okay with backing up your files, you might want to perform a full recovery back to factory default conditions. At that point, you'd at least know whether it was due to hardware or software.
- Peter -
Please Help PI Data Dependent Integration Builder Authorizations NOT Workng
Dear Friends / Experts,
I had spend many days and explored all Weblog and links on this website and implemented all the steps required to acheive Data Dependent Integration Builder Security and I am not successful so far. I am just giving up now - Please Help Me ---
As I said, I already read all the important Forum Links and SAP Web links and Followed Each and Every Step - service.sap.com/instguidesNW04 ® Installation ® SAP XI
Security Requirement - Data Dependent/Object Level Authorizations in XI / PI
In distributed teams or in a shared PI environment it might be necessary to limit authorization for a developer or a group of developers to only one Software Component or objects within a Software Component or to specific Configuration Objects.
Our Environment - PI 7.0 SP 16
Created a new role in the Integration Builder Design
u2013Add Object Types of any Software Component and Namespace
- Enable usage of Integration Builder roles in Exchange Profile
Integration Builder u2013Integration Builder RepositoryParameter com.sap.aii.util.server.auth.activation to true
Assign users to the newly created Integration Builder roles
u2013Create dummy roles in Web AS ABAP, these roles are then available as groups in Web AS Java
u2013Assign users to these roles
u2013Assign the Integration Builder roles to the above groups in Web AS Java
u2013Assign unrestricted roles to Super Users
Please help - How to validate whether Data Dependent Authorizations are Activated?
I am working with XI Developers and Basis Team and we did updated all the Required Exchange profile parameters.
Per this Document - User Authorizations in Integration Builder Tools - Do we need to update the server.lockauth.activation in Exchange Profile. When We updated, It removed Edit Access from all XI Developers in PI
In both the Integration Repository and the Integration Directory, you can define more detailed authorizations that restrict access to design and configuration objects.
In both tools, you define such authorizations by choosing Tools ® User Roles from the menu bar. The authorization for this menu option is provided by role SAP_XI_ADMINISTRATOR_J2EE. Of course, this role should only be granted to a very restricted number of administrators. To activate these more detailed authorizations, you must set exchange profile parameter com.sap.aii.ib.server.lockauth.activation to true.
The access authorizations themselves can be defined at the object-type level only (possibly restricted by a selection path), where you can specify each access action either individually as Create, Modify, or Delete for each object type, or as an overall access granting all three access actions.
http://help.sap.com/saphelp_nw04/helpdata/en/f7/c2953fc405330ee10000000a114084/frameset.htm
I was able to control display and maintain access from ABAP Roles, but completely failed to implement Integration Builder Security?
Are there any ways to check Whether Data Dependent authorization or J2EE Authorizations are activated?
Thanks a lot
SatishHello,
so to give you status of our issue.
We were able to export missing business component .
But we also exported some interfaces after that and we had some return code 8, due to objects still present in change list on quality system (seems after previous failed transports , the change list was not cleared completley...).
So now we have checked that no objects is present in the change list of quality system and we plan to export again our devs on quality system.
Hope after that no more return code 8 during imports and all devs transported correctly on quality system.
Also recommending to read that, which is pretty good.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7078566c-72e0-2e10-2b8a-e10fcf8e1a3d?overridelayout=t…
Thanks all,
S.N -
my ipod touch 4g is not being recognised on my new toshiba laptop or itunes. Its not being shown on my computer and its not shown as 'unspecified' in the 'devices window'. The ipod touch starts charging then stops this keeps continuing like a ongoing circle. Please help.
I have tried on my family members laptop and its seems to be picking up. So the ipod or the usb wire is not the issue.
I have tried everything from reinstalling itunes and updating windows.
I have tried the diagnostics test and its still says the ipod cannot be found.See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
I have the newer version of the macbook pro and I have read the directions on how to authorize your computer to let you download previous song purchases from icloud onto your laptop, but I cannot find where it says "authorize this computer" at all. I have looked for it everywhere and still cannot find it. Please help!
Authorization and Deauthorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.
More On De-authorizing Computers (contributed by user John Galt)
You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us. -
Toshiba External Hard Drive not recognized by computer. Please help!
I was wondering if anyone could help me. I have an external hard drive and it will not show up in "My computer" when I plug it in. I have tried other USB drives and other computers. I am starting to think it is a hardware issue but I don't want to lose hope. The blue light is coming on when you plug it in but it doesn't blink and there is no noise whatsoever. Is there anything I can do to fix this issue so that I can recover the information on it? Thanks in advance for any help. It is greatly appreciated.
Additional information: I'm not sure how old this thing is but the model number is HDDR160E03X.Same problem: I can't see my Toshiba PH3100U-EXB (Gen 2) external hard drive when I plug it in. After awhile I get this error message (see attachment): USB Device Not Recognized. One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. FOr assistance in solving this problem, click this message."
When I click it, I get a list of USB ports and devices, with Unknown Device in bold face. No real information there.
Yes, I ran Disk Management and the Toshiba did not show up when I plugged it in and hit Refresh.
Does it make a difference that the last time I used the external hard drive, we were in Windows XP and now we're in Windows 7?
Please help! It's not just the backing up I'm worried about...it's being able to retrieve files later!
Thanks!
Attachments:
USB-NotRecognized.jpg 28 KB -
I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD
To delete files from your external HDD, attach it to your MBP and drag the unwanted files to trash and then empty trash.
Then you select the files that you want to transfer by 'drag and drop' to the external HDD and trash the files on your MBP.
Ciao.
Maybe you are looking for
-
Movement type 342 O is not listing in MB1b T.code, hw to make it active
Movement type 342 O is not listing in MB1b T.code, hw to make it active. i need to transfer post the materials to vendor.
-
can you give me resources and example programs to create XML schema in abap
-
Finally i decides to send the problem, after having hard time 1 week, sure that you can help me now i tried my best coming through all the prerequisites on both the servers SQL server and SCOM server: save my days plz thank u Alex [15:49:46]: Always
-
My facetime connects and I can see the other person perfectly. However, they only see a black screen from me. I have checked my camera and it is working fine.
-
Hi Does anybody know the syntax for changing the text color for workspace customization ? like for backgorund color ,we have color = "background-color:IndianRed" Ritu