IMac G5 w/new Extr card barely connects (w/WEP...ASCII opt?!) to home netw

I just purchased and installed an Extreme card on our iMac G5, and am having troubles with it connecting.
Currently, both iBooks (blueberry & G4) connect just fine to the Extreme base station, which is hooked to the cable modem. (We used to use an ethernet cable to connect with the iMac, but we had to relocate some things around the house, so it's time to go wireless.) The airport firmware is updated.
I installed the extreme card (twice -- yeah, I had to go back and re-do to get the card and the antenna clicked securely in, so I've seen the pictures of what the connected parts are supposed to look like, and I think I'm well hooked in), turned on the iMac, and at first got the message "error occurred joining selected wireless network." Or, through an alternate route, some message about the password not being accepted. (Our password has 5 characters; when I'd type it in, the input box would flash over to show seven character-blips?)
I searched based on that error message phrase and found some posts from iFelix and others last year about the various WEP settings. So I noodled around and switched the login for the iMac to go via WEP...ASCII, and I was able to get on -- sort of. (Airport station is currently configured to 40 bit WEP; the other computers log in via ordinary WEP.)
But the connection to the iMac is really weak -- it starts at full signal, drops quickly to almost nothing, and eventually drops to no signal at all. (Even though my iBook sitting right next to it has a perfectly strong signal.)
I'll open up and take one more look at the antenna connection, but if that's not it I'm really stumped.
thanks!

Similar Messages

  • HT1212 I found an iphone over one year ago. Its locked with a passcode. I kept waiting for the owner to call it. They never did. I went to ATT store today, they put a new sim card in it. but now itunes needs the passcode to reset it to factory settings.

    I found an iphone over one year ago. Its locked with a passcode. I kept waiting for the owner to call it. They never did. I went to an AT&T store today, they put a new sim card in it. and told me to go home, log on to itunes, and restore the phone to "factory settings".But itunes says the phone is locked and it needs the passcode to reset it to factory settings.
    Any workaround? Or, am I doing something wrong here?
    Thanks so much.
    Joe

    Sounds like you may be the owner of a new phone!  If you don't need or want it and no one claims it you probably can sell it. Check eBay to see what the going rate is.
    You are to be commended for at least trying to find the owner. Many wouldn't. 
    Best.
    GDG

  • I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

    I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

    I tightened all HD screws and it didn't help. With the machine running and side of the case off, I physically stopped both the video card fan and the front case fan with my finger for a couple seconds and the noise continued. I also took all hard drives out one by one and rebooted each time. Again, the noise continued until I took out the Mac HD in Bay 1, rebooted, and I had a very quiet, silent machine. The issue is the hard drive in bay 1 that shipped with the computer, it's without a doubt causing the hum/woosh sound. I still need to know if I can safely swap the Mac HD from bay 1 to bay 4 without any issues to the operating system. I would like to try that to see if it dampens the noise but I also want to make sure this swap won't screw up my machine at all.

  • We just added a new printer and bluetooth connection to our iMac.  Now iTunes does not recognize our iPads as devices.  Have already tried restarting everything.  Any other suggestions?

    We just added a new printer and bluetooth connection to our iMac.  Now iTunes does not recognize our iPads as devices.  Have already tried restarting everything.  Any other suggestions?

    You can try the steps recommended here: http://www.apple.com/support/ipad/assistant/itunes/

  • How do I connect an older imac to my new imac to use as a second monitor?

    Hi !
    I was wondering if it were possible to  connect an older imac to my new imac to use as a second monitor?
    My older imac is from 2006. The new one is a 2012 imac.
    Any advice would be appreciated.
    Thanks,
    JC

    http://support.apple.com/kb/PH4469
    Look this article over, the key is to connect either mini display port or thunderbolt and using CMD+F2, let me know if this helps or if it doesn't work out. I'll find another solution if this doesn't work Joel ^_^

  • I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    Hi mshields1162,
    Great question, and welcome to Apple Support Communities.
    First, you may want to choose to have the sidebar displayed for familiarity:
    iTunes 11: Frequently used features
    http://support.apple.com/kb/HT5649
    Afterwards, your device should be displayed if connected:
    We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
    Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
    iTunes 10: Sync to your iPod
    http://support.apple.com/kb/VI72
    Thanks,
    Matt M.

  • Can I upgrade the video card in my 2009 iMac with the new ATI 2 GB VRAM card?

    I am looking for more video RAM for video, CGI and animation work in Blender.
    I may purchase Final Cut Pro X in the near future and I need to make sure there is enough video RAM to be able to work with this version of FInal Cut.
    I, currently, use Final Cut 4 Express and though this runs fine, through Rosetta, on my current setup, I fear this much newer version may need more graphics power than I have, now.
    I, also noticed some lag when working with Blender.
    No where near as much graphics or video/animation lag as when I using Blender on my old G4m but it's still slightly noticeable.
    I realize I may have to install this myself.
    Can I purchase, somewhere, Apple's 1 or 2 GB ATI card seperately or from a third party vendor and install, myself.
    I have seen posts that tell that the 27 inch iMac has a removable video card and is not soldered to the logic board like in the 21 inch models.
    If true, is there a complete procedure for the iMac breakdown, installation of the video card and reassembly procedure?
    My iMac only has the stock 256 MB VRAM graphics card.
    If the take down looks more difficult than I feel I can attempt, I have an Apple authorized reseller, repair facilty here, in my area.
    Could I purchase the card and have them install it for a fee?
    ThanX for all of the info and advice, in advance
    Michel

    You will need to check if your model originally was offered with a custom build option that included a different graphics card. If so, you may be able to have it done; here is a fellow who managed to do it on a 2011 iMac (graphics card not soldered) and the model originally offered a better card option:
    https://discussions.apple.com/message/18919734#18919734
    Is this yours:
    http://everymac.com/systems/apple/imac/specs/imac-core-2-duo-3.06-27-inch-alumin um-late-2009-specs.html
    In particular, click on the link in this section of the specs:
    I'd check either with Apple and/or an AASP to see if it can be done with yours or if yours is one of those where it is part of the Logic Board/soldered to it.

  • IMAC 2007 has broken crackly sound after new graphics card

    My 2007 iMac recently had a black screen and has had a new graphics card installed by a local company. I've picked it up today but when I got the IMAC home the sound only seems to come out of the right speaker and is very broken and low, hardly audible, also the chime at start up was like this.
    Does anyone know why this could have happened and is there anything I can do without having to take it back in?

    Well one piece of advice I can offer is to always take a Mac (any Mac) to an Apple Authorized Service Provider (AASP) or an Apple Store. If you took it somewhere that is not an AASP you never know the level of service you are getting. I would be willing to guess there is an AASP in your general area. If you don't know of one click https://locate.apple.com/lac/en/

  • Have new iMac OSx10.8.2, and when I connected my Epson Stylus pro3880, loaded printer drivers, and tried to print, the printer utility opens, then crashes. Any ideas? (it worked fine on my last iMac)

    Have a new imac OSx10.8.2, and when I connected my Epson Stylus pro 3880, loaded print drivers, and tried to print, the printer utility opened and then crashed; happened several times. Any ideas? (it worked fine on my older imac)

    I believe so. the driver version I have is 8.64
    The person gave me the instructions to reset the printing system and I followed it. That's what corrected the printing drop down windows.
    I am also having trouble finding the downloaded icc profiles for the papers I use. I see them in the Color Sync Utility, but not in the drop down window for Color Management. There is a thread on this forum relating to that, but I don't understand how to "copy" the profiles and put them elsewhere.

  • Hello.  i have a 2011 iMac G4 with OSX10.9.2  and I can't find AirPlay .   is it on this version of iMac?  i just got a new soundsystem expecting to connect via AirPlay

    hello.  i have a 2011 iMac G4 with OSX10.9.2  and I can't find AirPlay .   is it on this version of iMac?  i just got a new soundsystem expecting to connect via AirPlay but don't know where to find it....?

    About AirPlay and Airplay Mirroring
    AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
    Several Apple Articles Regarding AirPlay
    Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
    How to set up and configure AirPort Express for AirPlay and iTunes
    iTunes- Troubleshooting AirPlay and AirPlay Mirroring
    iTunes- Using AirPlay
    Apple TV (2nd and 3rd gen)- Understanding AirPlay settings
    About AirPlay Mirroring in OS X Mountain Lion
    iTunes 10- About playing music with AirPlay
    Troubleshooting AirPlay and AirPlay Mirroring
    Using AirPlay
    Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs  that do not support Airplay and mirroring.
    Other solutions are the Air Parrot, StreamToMe, and AirServer.

  • I'm in need for a thunderbolt display before December.  My old Imac is like new (don't want to invest in a new Imac yet).  Can I connect the thund-D to the old Imac via USB for the time being?

    I'm in need for a thunderbolt display before December.  My old Imac is like new (don't want to invest in a new Imac yet).  Can I connect the thund-D to the old Imac via USB for the time being?

    Their are some display adaptors you can get. I have an older Mac Pro with DVI but my monitor is a Thunderbolt Display. This used to be around $250. It is way cheaper now.
    http://www.bhphotovideo.com/bnh/controller/home?O=&sku=810627&Q=&is=REG&A=detail s

  • Hello! I just wanted to connect my new credit card but it said that I should ask apple support to do that

    Hello! I just wanted to connect my new credit card but it said that I should ask apple support to do that

    One approach is http://www.apple.com/emea/support/itunes/contact.html

  • I transferred settings and files from old MacBook air to new one.  New one now gives popup about failing to connect to server (old iMac).  the new Mac air and old iMac have never met and are 2000 miles apart. How do I stop the popups?

    I transferred settings and files from old MacBook air to new one.  New one now gives popup about failing to connect to server (old iMac).  the new Mac air and old iMac have never met and are 2000 miles apart. How do I stop the popups?

    Change your settings in Sharing preferences, for one, and remove the server out of the Finder's sidebar. Obviously, this is the result of transfering all your other computer's preferences to your new computer.

  • When I connected my iPhone 6 to my iMac to download new photographs they were downloaded in .aae format. How can I change them back to jpg? And how can I get jpg in future?

    When I connected my iPhone 6 to my iMac to download new photographs they were downloaded in .aae format. How can I change them back to jpg? And how can I get jpg in future?

    Sync the apps to the iPod via iTunes. Make sure that the apps are chaec to syc and the proler boxes checked in the Apps pane for the iPod in iTunes.

  • My credit card expire. I can't login to Adobe Connect for add my new credit card for payments. What can I do?

    My credit card expire. I can't login to Adobe Connect for add my new credit card for payments. What can I do?

    Oh dear...
    You must be accessing the iTunes Store in the U.S. You can't buy an iTunes card in your country (i need to know this), so try making a new account with the payment option as a Visa Credit Card. Have you bought that Pre-paid Visa credit card yet and loaded money on it? If you haven't, you will probably have to.

Maybe you are looking for

  • Read payload for error messages and throw a red flag in SXMB_MONI

    Hello All, I am calling a synchronous web service from PI ccBPM and getting a response back to PI ccBPM itself. So the steps in BPM are receive(from CRM), sync step (to call web service) and a control step (to end the BPM process). The requirement is

  • Streaming Video in IE

    Hi, I'm evaluating the Flash Streaming Server product for an upcoming website I'm working on, and so far it's working! However, I can't seem to explain why streamed videos viewed in Internet Explorer are skippy. The audio stream is fine. If a user pl

  • Extra Calendars

    Hello, I have quite a full calendar with different names and work schedules on it. Suddenly one day, after printing, my iCal began to add an extra calendar that appears twice in one day. So that I already have mine, "Deanna 12-Close", then it will ad

  • Can you get to homescreen without home button or gestures

    I have three Ipad"3"s Kiosks that block the home button from users, and restrict access to the power button. I want to disable gestures so people can not close out the app randomly, but without gestures and not being able to access the home button wi

  • MSS Org Chart RFC error

    Dear SDN Community,   When I am trying to view the org chart, I get an RFC expcetion on the screen. It dumps in R/3 and the dump says. <b> User "MSS_USER1" has no RFC authorization for function group "SYSU".</b> But the user MSS_USER1 has SAP_ALL as