Read payload for error messages and throw a red flag in SXMB_MONI
Hello All,
I am calling a synchronous web service from PI ccBPM and getting a response back to PI ccBPM itself.
So the steps in BPM are receive(from CRM), sync step (to call web service) and a control step (to end the BPM process).
The requirement is to check if error_list node in the response from web service call has a value in it and throw an error in SXMB_MONI so that they can easily identify how many messages errored out out of thousands of messages.
This is the response structure for web service if there are errors.
<manageResponse>
<result>
<ErrorList>
<object>
<hyatt>partnerupdate--NR</hyattt>
<Message />
<Operation>jukio</Operation>
<User>atuser</User>
</object>
</ErrorList>
</result>
</manageResponse>
Again I only need to see if error_list is not empty and throw a red flag error in SXMB_MONI.
Thanks
Mike
Hi Mich,
In Response map when Error segment appear's fail the maping so that you can see the list of message in MONI. and do not need to put any conditions in MONI.
I mean in your Respoinse when ERROR_LIST segment coman under that one manatory field you select and take that field length say 20 characters.
source field->Substring (0,100) get the 100 characters from source in that case case from source it won't get 100 characters mapping will fail so that you can see the Error messages in SXMB_MONI.
Finally what I am saying do the wrong condition mapping in the response mapping so that mapping will fail.
Regards,
Venu.
Similar Messages
-
I have had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
-Griff W. -
I run windows 7/8 and lightroom 5.7 I am getting an error message and here it is " lightroom encountered an error when reading from its preview cache and needs t quit" How do I fix this.
THANKS
Hank Wilkinson
Please visit my web site <http://www.hankwilkinson.com/> www.hankwilkinson.com for the latest of my photos
For information on any of these photos please email me or call 612-756-9970 -
I have had an eMac for a few years. I don't know any of the specs. Every time I try to download or install a new version of itunes or OS I get any number of error messages and cannot complete. Help!!!!
It's best to start with figuring out your eMac model and OS in order to answer the question. This article will help you determine your model:
How to locate the serial number and identify your model
And to get the version of Mac OS that's installed:
From the Apple Menu at the left end of your menu bar, select "About this Mac..."
In the resulting Window, you can see the Mac OS version just under the big "Mac OS X":
If the eMac is older and you have never upgraded the system software, it's possible that your OS version is too old to run the current iTunes. The current version requires OS 10.5 (Leopard)or higher, which is a pay-for system upgrade. -
I was at 30% on the arvato downloader and it messed up, suddenly sent a error message and said "download canot continue, plese contact adobe support" I have been sitting here for 2 hours dowloading. I am upset. I didnt pay over 100 bucs not to be able to use it. I have customers waiting!! what do I do???
You can have direct download from this link:
<Download Photoshop Elements products | 13, 12, 11, 10>
Make sure you select the correct version for your operating system. You also need to have a reasonably faster reliable Internet connection.
Good luck.
elemntsmessup=upset wrote:
I was at 30% on the arvato downloader and it messed up, suddenly sent a error message and said "download canot continue, plese contact adobe support" I have been sitting here for 2 hours dowloading. I am upset. I didnt pay over 100 bucs not to be able to use it. I have customers waiting!! what do I do??? -
I got a request from apple to update my itunes and while uploading the update, the program gave an error message and now I can not open my itunes and fear that all my music etc is gone? what do I do to correct this problem?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
In downloading iTunes onto my PC (Dell XPS 8700) with Windows 8.1 trying to sync my iPhone but receive keep receiving following error message and I just don't know how to fix: iPhone cannot be synced. You do not have enough access privileges for this operation.
I would greatly appreciate help with this matter.See if the user tip helps: https://discussions.apple.com/docs/DOC-6562
-
I am not able to open your answer for some reason my computer is not opening it in Explorer, it’s not responding and I keep getting error messages and I don’t know how to open it in another browser when Explorer experiencing issues.
HeatherIf you have IE version 10 go to TOOLS and change the option to use Compatibility View
-
Every time I try to install Adobe Reader, I get error message "object already installed". Tried all the fixes and suggestions. I need help.
If you haved tried all the fixes and suggestions, there is not much to add. Just in case: did you really try using this tool http://labs.adobe.com/downloads/acrobatcleaner.html to first eliminate all traces of Reader, and then use the full offline installer from http://get.adobe.com/reader/enterprise/?
-
So I download photoshop cc (2014) and when I go to open the program, it gives me an error message and shuts the program down. It says," A problem cause the program to stop working correctly. Windows will close the program." Can someone help me please?
I've got the same issue and it affects all my adobe software. You are not alone as I have seen several postings looking for the answer to this help request.
-
My iPhoto won't open keeps on giving me an error message and my microsoft office two
my iPhoto won't open keeps on giving me an error message and my microsoft office two
There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Basic stuff:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.
With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. More information means you get better assistance. (And no, more exclamation marks do not get help faster or make your issue seem urgent. They just make it seem like you have a stuck key ) -
Why am I receiving the "Unfortunately, Messaging has stopped" error message and how do I fix it?
I am so upset. Please read my messages from my postings. This has nothing to do with SIM Card, Hard Reset, Apps, Google Gmail Account, nothing. I have gone thru all of this and NOTHING has fixed this. I went to the store today and spoke to the manager on duty. He said he had to try and duplicate the problem before he could help me. I showed him "screen captures" I did, told him it's out here on the board, etc. etc. Needless to say I ended up coming home with the same phone, "he" erased the phone and started over again. Well guess what, it's not a error with "MY" Gmail account being corrupted because if that is the case Mrs. Hayden14 has a bad Gmail account too. If you guessed it, the phone just crashed again! I was able this time to capture a report with ALL the history in it and saved screen captures to PROVE to him this is not a joke. Even the report says "Crash". This time it was something else I don't even or ever have used. I have also wasted over a day , yes a full work day on this without question.
I have had to get the run around for the last day. This is totally ridiculous, including them putting me on hold for 55 min. Oh, that's another funny story. Anyways, tomorrow morning I am going to the Verizon store one last and final time and I hope they decided to do the right thing and give me a phone that does not crash and works. It would be handy at work for me, especially where I work at. I hope hope hope someone listens to and helps me. I would love for them to see me walk in, take my phone and say to me were going to get you another phone, hand it to me, see if it works and prove it's the device. I don't hear anyone having this issue on other phone types so sounds like its the phone type.
I have had 3 phones now in the matter of 2 weeks. I am sure the FedEx charges will add up to a cost of a new phone at some point and start to outbalance your requirement to give me the same phone when it has the same problem.
Can't wait to see what happens tomorrow. -
I set up a passcode to ensure the security of my iPhone 5 but, when I enter it on the home screen, I repeatedly receive an error message and my phone locks. Is there a way to reset the passcode when I am unable to gain access to my phone?
I figured that was the case, but I've used the same passcode for years and I can't seem to figure out how I managed to screw it up when I set up my phone. Without being able to access my phone for a restore, how would I accomplish this? iTunes? Thank you very much for you help!
-
How to catch error message and show it in VC?
I want to catch the error message and show it in VC.For example, if there is no data row in table view queryed from data service, then popup a window to show the message "No Data Found".I don't konw how to implement it!
Hello Kane
use expression{disble this after defining erroe messege} box in that popup there u can define your own message as error or warning accordingnly it display message
I hope it work or Let me know it
Regards
````Satish```` -
BPM for error handling and acknowledgements
Hi,
Can any one tell me how to handle BPM for error handling and acknowledgements in one scenario.
Please send me the link if you have other wise give me the solution on the same.
Thanks,
NageshHi !
Just check out these links This might help you.
Usually Application Level Acknowledgement is considered during Sync communication. If you are using RFC, you can make use of Sync communication. So you can handle it without bpm, provided your both sender and receiver are sync interfaces.
To know about Ack-
http://help.sap.com/saphelp_nw2004s/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
you can not dirrectly access the content of the ACK, however the BPM shows different behaviours based on the ACK status. E.g. if the ACK contains a success message the BPM will continue in its normal process, if the ACK contains a permanent error, it will either stop or go through an exception branch (provided such a branch has been defined). Have a look at the documentation: http://help.sap.com/saphelp_nw04/helpdata/en/43/65ce41ae343e2be10000000a1553f6/content.htm It doesnt"t state the above mentioned behaviour in detail but says that you need to define an exception branch.
The trickiest part is always to find out, when you will get a transient vs. as permanent error ack. If you are using ACKs with Proxies refer also to this link http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/content.htm and this http://help.sap.com/saphelp_nw04/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/7b/94553b4d53273de10000000a114084/content.htm
<b>The following link has entire configuration of Receiver XI Adapter (including acknowledgements)</b>
http://help.sap.com/saphelp_nw04/helpdata/en/f4/0a1640a991c742e10000000a1550b0/content.htm
<b> eror handling in BPM.
</b>
1. CCMS monitoring
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/42fb24ff-0a01-0010-d48d-ed27a70205a8
2. BPM Monitoring
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
3. Monitoring XML Messages http://help.sap.com/saphelp_nw04/helpdata/en/41/b715045ffc11d5b3ea0050da403d6a/frameset.htm
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
monitoring BPm https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
Reconciliation of Messages in BPM - /people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm
Also see the below BPM related links
check list for BPM https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Many other examples can be found under the following link at help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
And some weblogs
https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm *****
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps *****
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements *****
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
Also have a look at these seminars,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
Thanks !!!
Regards
Abhishek Agrahari
Questions are welcome here!!
<b>Also mark helpful answers by rewarding points</b>
Maybe you are looking for
-
Hi all . THis is how I built my Jtree:' public class AECategory public String name; public String description; public String value; public AECategory(String name, String description, String value) this.name = name; this.description = description; thi
-
hy, does anyone know why my computer doesn't recognise my iphone? I can't seem to make it see the personal hot spot any suggestions? thanks
-
Hi, I'm a student and I must do a migration from Sql Server to Oracle. But , I want to know what is more used on the market place ? Oracle 7 or Oracle 8 ? Thanks a lot
-
I'm on Mac OS X 10.6.8 and bought QuickTime Pro from the Apple store, but discovered I couldn't register it as the QuickTime icon wasn't appearing in System Prefs for me to click on and enter the registration details. I've reinstalled QuickTime from
-
Cannot use my Apple ID to log into Support Communities
I can't log into support communities using my Apple ID. I have to log in using an older e-mail address I used when Apple first started cloud-like services MANY YEARS ago. The e-mail address I have to use is obsolete and I'd just like to abandon its u