IMac not connecting to network when booted into Mountain Lion Installation Partition

My iMac for some reason won't connect to any networks in the list when I'm booted into the installer using a partition, I cick my network, but it does nothing! I even tried clicking a random network with a password it didn't even ask for the password after I clicked it, it wouldn't do anything! What do I do? How do I get this working in the installler partition?

Reset the PRAM > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.

Similar Messages

Cannot boot into mountain lion after I have set the start volume to CD drive

Previously I need to boot from CD so I have set the start volume to CD drive by pressing command+option+P+R at the same time and change the start up volume to CD drive.
But right now, it can just start from CD but cannot boot into Mac OS (Mountain Lion) which is installed in the hard disk.
I have tried to press command+option+P+R at teh same time during bootup but seems like right now it doesn't recognize this command. I have tried pressing "X" or "option" or spacebar, etc during bootup but still it tries to boot from CD.
Anyway I can change the start volume back to my internal hard disk?
I have even disassembled my iMac and the CD drive to remove the previous CD as well. Then it still tries to boot from CD drive but now saying the device is not bootable and ask me to insert a bootup disk. I then tried to put the Mountain lion installation DVD (I previously created the installation DVD by following the DIY way from this link http://www.cultofmac.com/180925/how-to-make-a-bootable-disk-or-usb-drive-of-os-x -mountain-lion/) there in the drive but it still said the device is not bootable.
I have disassembled my iMac again to remove the mountain lion disk right now. So the CD drive is now empty. Anyway I can change the start volume back to my internal hard disk?
This is really frustrating .. Hope someone can help.
thanks!

Have you ejected the CD/DVD by holding mouse button on bootup?
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964

IMac loses connection to network when waking from sleep

Hi There,
We are a small mixed environment of Macs and PCs running on a Windows 2008 domain. One of 2 iMacs that now run Mountain Lion 10.8.5 is having problems when waking from sleep. One of our designers will go for lunch and the machine will sleep for about 30 to 40 minutes. Upon her return the iMac will kick her off of the 3 shares she usually logs into (2 are on Win2008 machines, and 1 is a MacPro running 10.6.8 Server).
If she has files open in any of the Creative Suite Apps, the app will crash and she will have to restart the whole machine. If no files are open then she can usually reconnect to the shares after a short while. Obviously I told her not to leave any files open, but its causing her some headaches.
Its also creating srv errors (id 2012) on our domain controllers, when she tries to wake her machine.
This Imac is a late 2009, and we have a 2011 model that has no issues at all. Both are set exactly the same.
I have reset SMC, Pram, and rebinded to the domain, and searched through these forums quite a bit to no avail.
Any thoughts or suggestions would be much appreciated.

I am continuing to work on this issue, and have tried a number of things based on searching here and elsewhere.
And Lucky Me, I have been able to replicate this behavior on one of other Macs (imac 2011, on 10.8.5). I also see errors on 2 separate Windows file servers on the domain (Event ID: srv 2012).
Below I am posting what seems to be the relevant area of the log.
Nov 14 11:48:04 PrePressMac2 kernel[0]: Wake reason: EHC1
Nov 14 11:48:04 PrePressMac2 kernel[0]: Previous Sleep Cause: 5
Nov 14 11:48:04 PrePressMac2 kernel[0]: The USB device HubDevice (Port 1 of Hub at 0xfd000000) may have caused a wake by issuing a remote wakeup (2)
Nov 14 11:48:04 PrePressMac2 kernel[0]: 18323.795216: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
Nov 14 11:48:04 PrePressMac2 kernel[0]: 18323.795224: switchVap from 1 to 1
Nov 14 11:48:04 PrePressMac2 kernel[0]: The USB device Keyboard Hub (Port 3 of Hub at 0xfd100000) may have caused a wake by issuing a remote wakeup (3)
Nov 14 11:48:04 PrePressMac2 kernel[0]: The USB device Apple Keyboard (Port 2 of Hub at 0xfd130000) may have caused a wake by issuing a remote wakeup (3)
Nov 14 11:48:04 PrePressMac2 kernel[0]: HID tickle 117 ms
Nov 14 11:48:04 PrePressMac2 kernel[0]: TBT W (1): 0 [x]
Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: handle_will_sleep_auth_and_shield_windows: no action for lock state 1
Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: Created shield window 0x1e1 for display 0x003f003d
Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: handle_will_sleep_auth_and_shield_windows: no action for lock state 1
Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: Created shield window 0x1e2 for display 0x003f003e
Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: handle_will_sleep_auth_and_shield_windows: no action for lock state 1
Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: Created shield window 0x1e3 for display 0x003f003f
Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: handle_will_sleep_auth_and_shield_windows: no action for lock state 1
Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: Created shield window 0x1e4 for display 0x003f0040
Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: handle_will_sleep_auth_and_shield_windows: no action for lock state 1
Nov 14 11:48:05 PrePressMac2 kernel[0]: AppleBCM5701::selectMedium - autoselect, any duplex, EEE allowed, flow control allowed
Nov 14 11:48:05 PrePressMac2 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
Nov 14 11:48:06 PrePressMac2.local KernelEventAgent[47]: tid 00000000 received event(s) VQ_NOTRESP (1)
Nov 14 11:48:06 PrePressMac2.local KernelEventAgent[47]: tid 00000000 type 'smbfs', mounted on '/Volumes/PrePress', from '//aconti@GAIA/PrePress', not responding
Nov 14 11:48:06 PrePressMac2.local KernelEventAgent[47]: tid 00000000 found 1 filesystem(s) with problem(s)
Nov 14 11:48:10 PrePressMac2 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,0321,0de1,0300,c5e1,7800]
Nov 14 11:48:12 PrePressMac2.local configd[19]: network changed: v4(en0+:192.168.1.184) DNS+ Proxy+ SMB+
Nov 14 11:48:12 PrePressMac2.local SophosAntiVirus[67]: reloading scheduled scans...
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net configd[19]: setting hostname to "prepressmac2.cutpasteandprint.net"
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]: label: default
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]:           dbname: od:/Local/Default
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]:           mkey_file: /var/db/krb5kdc/m-key
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]:           acl_file: /var/db/krb5kdc/kadmind.acl
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]: digest-request: uid=0
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net rpcsvchost[1049]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]: digest-request: init request
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]: digest-request: init return domain: CPP server: PREPRESSMAC2
Nov 14 11:48:12 prepressmac2 kernel[0]: Sandbox: sandboxd(1050) deny mach-lookup com.apple.coresymbolicationd
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net sandboxd[1050] ([1049]): rpcsvchost(1049) deny file-read-data /private/var/root/Library/Preferences/ByHost/.GlobalPreferences.037506C4-0B10-5 70D-A7B6-B3B8F7AE0CC6.plist
Nov 14 11:48:12 prepressmac2.cutpasteandprint.net sandboxd[1050] ([1049]): rpcsvchost(1049) deny file-read-data /private/var/root/Library/Preferences/.GlobalPreferences.plist
Nov 14 11:48:13 prepressmac2.cutpasteandprint.net nsupdate[1055]: krb5_sendto_context is called on main thread, its a blocking api
Nov 14 11:48:13 prepressmac2.cutpasteandprint.net nsupdate[1055]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:13 prepressmac2.cutpasteandprint.net nsupdate[1056]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:14 prepressmac2.cutpasteandprint.net nsupdate[1057]: krb5_sendto_context is called on main thread, its a blocking api
Nov 14 11:48:14 prepressmac2.cutpasteandprint.net nsupdate[1057]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:14 prepressmac2.cutpasteandprint.net nsupdate[1058]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:15 prepressmac2.cutpasteandprint.net nsupdate[1060]: krb5_sendto_context is called on main thread, its a blocking api
Nov 14 11:48:15 prepressmac2.cutpasteandprint.net nsupdate[1060]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:16 prepressmac2.cutpasteandprint.net nsupdate[1061]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:17 prepressmac2 com.apple.launchd[1] (com.apple.smb.preferences): Throttling respawn: Will start in 5 seconds
Nov 14 11:48:17 --- last message repeated 2 times ---
Nov 14 11:48:17 prepressmac2.cutpasteandprint.net nsupdate[1063]: krb5_sendto_context is called on main thread, its a blocking api
Nov 14 11:48:17 prepressmac2.cutpasteandprint.net nsupdate[1063]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:18 prepressmac2.cutpasteandprint.net nsupdate[1067]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:18 prepressmac2.cutpasteandprint.net netbiosd[92]: name servers down?
Nov 14 11:48:19 prepressmac2.cutpasteandprint.net nsupdate[1068]: krb5_sendto_context is called on main thread, its a blocking api
Nov 14 11:48:19 prepressmac2.cutpasteandprint.net nsupdate[1068]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:19 prepressmac2.cutpasteandprint.net nsupdate[1069]: gss_init_sec_context is called on main thread, its a blocking api
Nov 14 11:48:22 prepressmac2.cutpasteandprint.net digest-service[1048]: digest-request: uid=0
Nov 14 11:48:22 prepressmac2.cutpasteandprint.net digest-service[1048]: digest-request: init request
Nov 14 11:48:22 prepressmac2.cutpasteandprint.net digest-service[1048]: digest-request: init return domain: CPP server: PREPRESSMAC2
Nov 14 11:48:22 prepressmac2.cutpasteandprint.net KernelEventAgent[47]: tid 00000000 received event(s) VQ_NOTRESP (1)
Nov 14 11:48:22 prepressmac2 kernel[0]: smb_iod_reconnect: Reconnected share PREPRESS with server GAIA
Nov 14 11:48:32 prepressmac2.cutpasteandprint.net ManagedClient[1077]: ODUGetMCXRecordWithCache(): record unique ID for 'PrePressMac2' not set
Nov 14 11:48:32 prepressmac2.cutpasteandprint.net ManagedClient[1077]: ODUGetMCXRecordWithCache() Accessing network user record from Active Directory not allowed because no authentication information was supplied.
Nov 14 11:56:25 prepressmac2 com.apple.launchd.peruser.1997381720[389] ([0x0-0x4a04a].com.adobe.InDesign[630]): Exited: Terminated: 15
Nov 14 11:56:34 prepressmac2.cutpasteandprint.net spindump[1100]: Saved hang report for Adobe InDesign CS5.5 version 7.5.3.333 (7530) to /Library/Logs/DiagnosticReports/Adobe InDesign CS5.5_2013-11-14-115634_PrePressMac2.hang
This is from the 2011 iMac, and I see something very similar to this on the 2009 machine.
I continue to think this is a software issue related to 10.8.5 and Adobe CS (CS5 on the 2009 machine and CS 5.5 on the 2011) as this appears to have come up only since the recent update.
Any help would be appreciated.

Could not connect to game centre server on mountain lion

Hi Everybody,After Install Mountion Lion ,Everything Fine,Except When I Tried To Login To Game Centre,Its Get This Message "could not connect to game centre server",When I Tried To Login From My IOS Device With The Same Password ,Everything OK. I also Tried To Reset My PRAM(Command,Option,P,R)It's Didn't Work For Me.
Is There Anybody Have Any Solution For Me, Thanks!

Hi,Rastusik, I have Found a Solution From The Internet, Try This, 1). U Must Login At The Root Account(Adminstrator) 2), Go To Application/Utilities/Terminal, When The terminal Open,Type ;
sudo nano /private/etc/hosts ,Then Press Enter,
Enter The Root Account Password,
Check if you have edited the file sudo nano /private/etc/hosts (using terminal)
If you did, temporarily remove all custom edits from it till it looks like this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1       localhost
255.255.255.255 broadcasthost
::1             localhost
fe80::1%lo0     localhost
After this try logging in to Game Center again and it should work.
Once the login in succesful, you can reapply the custom settings in the
After this try logging in to Game Center again and it should work.
Once the login in succesful, you can reapply the custom settings in the
sudo nano /private/etc/hosts file. Game Center will continue to work.

Others can not see my attachments when i use Mountain Lion Mail.

When I use Mail to add attachments, the attachments all goes to the body of the mail.
how ever, my receivers all can not save my attachments in one time because they never see my attachments in the title,( they use MS outlook in Machontoshi ) but only see the files in the body of my mail. they all have to pull the attchment files one by one, and then edit the file names one by one again (when pull out the files, all files named "untitled"
any idea how to solve it?

you're in the wrong forum. This is for final cut pro studio users.

Can not print pdf files when upgraded to Mountain Lion?

I can see my pdf file until I go to print...then the page goes blank in review and my printer spews out blank pages. HELP! I never had this problem until I upgraded to Mountain Lion.

Let's try this:
You said;
then the page goes blank in review and my printer spews out blank pages
I'll take a guess that review should read Preview, is that correct (If it is the answer to Eric's question is Preview)

Not connected to network although it is connected wirelessly

I have a HP Photosmart 7510 All in one printer. I can print from computers wirelessly but it says not connected to network when i try to use web services, facebook, or efax. I cant even run an update because if no internet connection. i have tried rebooting routers and printer. Nothing else has issues with internet with router. I have also tried typing in the Ip address in the web address bar but when i go to networking it is asking for admin user name and password that i do not know. How can i fix this issue? I have downloaded drivers and software from HP site also.

Hi @Sniper187
Welcome to the HP Support Forums. I gather that you have encountered some difficulties with your Photosmart 7510 printer.
I have included a link to a post by @PrintApper regarding the Printables titled HP Apps Service Retired on several printers. It has the information regarding the apps on your printer. I have also included a link to a post by @PrintApper regarding eFax titled eFax users - please read. It has the information regarding the eFax feature.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

IMac does not connect to wifi on boot

I own an iMac and run it with OS X 10.7.5. Ever since system update 10.7.3 (February 2012) my mac more often than not does not connect to wifi on boot. I have to select diagnostics and connect manually. I did a design of experiment and have now discovered that I do not have this problem if I wait about a minute to log in after the login prompt displays. I like my mac for it's fast startup. It is a shame to have to wait unecessarily for it to connect to wifi before logging in. I kenw this was a problem with the system update and this confirms it. Does anyone know how to prevent this from happening so I don't have to wait?

It has been a month now and waiting a minute always works for connecting to my airport extreme on boot. I was cleaning behind my desk and realized that the ethernet cable was still attached to the back of the iMac even though I had moved the airport upstairs. I disconnected it. I also opened network preferences. The wifi was moved a long time ago to the top for priority, but the inactive ethernet and firewire were still listed. I removed both the ethernet and firewire so the only connection listed is wifi. My computer has now found the internet on 4 consecutive boots without waiting. It appears that having the other two options disrupts the connection process on boot. I will continue checking over the next week and let you know how it goes. Wish me luck!

My Apple TV recognises my wifi network but will not connect to it, when I enter the password

Help please - my Apple TV recognises my wifi network but will not connect to it, when I enter the password - it just says 'there was a problem connecting to the network - check your settings and try again (5).' What should I do next?

people repport that apple products in general I believe have problems with support for the outdated encryption type called wep encryption which is also pretty useless and easy to break
if you use that try disabling it or changing to wpa encryption
if you use MAC address filtering in your router then you need to add the appletv's MAC address to the positive list

My ipad2 will not connect to network since last iOs update.

My iPad 2 will not connect to network since last iOs5 update.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Macbook pro won't wake up when booted into Windows 7

Macbook Pro (Late 2010) with Snow Leopard and Windows 7 64bit. Bootcamp 3.3
When booted into OS X, then close the lid, let the machine sleep and later, if I connect to power source and USB keyboard and mouse, and then tap keyboard, machine wakes up.
If booted into Windows 7, if I follow same sequence, the machine won't wake up. The only way I can wake the machine up is by opening the lid.
Not a big problem, but certainly an annoyance.
Can anybody help?

Did you use a geniune windows installation disc? I ask this because I worked on a computer today where someone had tried to use a Windows XP disc that came with a Dell computer. These do not work.
If it was a genuine install disc, did you get all the way through with the installation, or did something go wrong during the install?

I had no problem with my IPad 3 connecting to my wi-fi but for some reason lately it tell me can not connect to network. I reset both my wifi and my ipad and I still get the same error.

I've had my IPad 3 for awhile and had no problems with it. The other day I went to connect to my wi-fi and it told me could not connect to network. It recognizes my wi-fi but won't connect. I have shut off my wi-fi and still the same problem. Today I reset my ipad back to factory and when I get to the wifi setup I still get unable to join the network. What is wrong

Dont use a password to connect the ipad and try if unable to join happens try another network. After that it is a repair. Now most likely it is the password on router. typically you access your router with http://192.168.1.1/ BUT it may be different if you changed it or your router uses different one.

HP Color LaserJet CP1520nw will not connect to network (time out repeatedly)

My HP LaserJet CP1520nw won't connet to my wireless router upon installation, no many how many times I've been asked to connect it to the computer via a USB printer cable. I uninstalled and reinstalled all software, and each time I try to set it up for wireless connectivity by connecting my computer and the printer via a USB printer cable, it gets to 99% installed on the progress bar and sits there until it times out. I suspect one of the follow but am open to other ideas from those more knowledgeable:
1. Is the printer locked onto some old, initial configuration from a previous wireless network that needs to be purged of addresses, etc. before it can accept the new ones?
2. Could my WPA WPA2 PSK AES encrytion be messing it up? Are the modern firmware and updates designed to accept these ? I never have gotten to a screen where it asks for my encyption key or even a WPS pass phrase. What to do if so?
3. Could Church Lady be correct and that it is Satan preventing the installation? If so, what icons does he use to watch out for and will my Norton anti-virus and malware quarantine him to Hell automatically or does it require manual enforcement?

Hi @Marvalina1968,
Welcome to the HP Forums!
I noticed that your HP Color LaserJet CP1520nw will not connect to network with Windows 7. I am sorry to hear this, but happy to help!
First to answer your questions:
It is possible the printer could be locked to an old configuration and needs to be reset.
I don't think your WPA WPA2 PSK AES encrytion could be messing it up, unless you got some really strange characters in your password.
Your Norton antivirus, could possible be causing the installation to fail.
Please take a look through the following guides:
'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
Printer Does Not Maintain Wireless Connection.
If the guides do not resolve the issue, please try the following:
Uninstall the software. Uninstalling the Printer Software.
Clean boot the computer. How to perform a clean boot in Windows.
Disable any antivirus programs. Disable antivirus software.
Disable any firewall programs. Turn Windows Firewall on or off.
Re-install the software. HP LaserJet Full Feature Software and Driver.
Hope this solves your problem, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Bootcamp 5.1 Windows could not prepare the computer to boot into the next phase of installation

I've searched the internet, I've tried solutions on some of the discussions on here:
Windows 8.1 install fails on new 2013 Retina MacBook
https://discussions.apple.com/message/23490854#23490854
How to install Windows 8.1 on Haswell MBP
https://discussions.apple.com/message/23545484#23545484
Windows 8.1 Install Fails on New 2013 Retina MacBook, Users Report
http://wind8apps.com/windows-8-1-install-fails-new-2013-retina-macbook/
(Can't try this one because I don't have physical media or a burner and don't want to upgrade to 8.1)
Tried maskedferret's and jarvil's instructions that might work for others but not for me. Also the process must be older version of disk utility. There is no "minus" to remove a partition in the one I have.
Half the problem is those threads are so long with people posting up their problems that are not even the same problem. So then you have to sift through all these responses that aren't even really releated.
If you're problem isn't this problem then please don't use this thread to solve another issue.
“Windows could not prepare the computer to boot into the next phase of the installation. To install Windows, restart the installation.”
I can't find in the release notes of any beta Maverick update that this is being addressed.
1) Does anyone know if there is a fix coming out for this?
2) Is there some solution that doesn't require to have physical media?
     a) I have Windows 8.1 iso and product key
     b) I have a 32gb USB stick that I had Bootcamp format
     c) I have a spare 16gb USB stick. Both are USB 2.0 so I can't do Windows To Go. Maybe I should get one.
3) I have no idea how tell which MacBookPro I have since no one at Apple seems to believe in model numbers. I just ordered it online two weeks ago and received it this week so I guess it's the "latest" model hardware wise. Running 10.9
The cloest possible solution I came across was to boot up Windows 8 OS on a USB stick (Not the install) and run diskpert or fdisk for mbr thought I can' try this out because I don't have Windows To Go. I'd rather have it worked problem from Apple if I can figure out when they plan to update I might be willing to wait.

Finally got a physical CD and to the third link option still same issue. Even worse actually as even after formating the partition I get a "Windows cannot be installed on this disk. The selected disk is of the GPT partition style"
Found my "-" minus remove parition in Disk Utility. Will attempt maskedferret's again

Galaxy Nexus Not connecting to network

Good Evening,
I just received a replacement phone for Galaxy Nexus. The phone is not connecting to network. I am able to connect to wifi but unable to make calls or send texts since having the phone activated last night. When I was in the store last night I was able to receive and send a few text messages but since then haven't been able to communicate using my phone. I don't know if this an issue with the service in the area North Attleboro, MA or with my phone. Been on hold for 20 minutes with customer service.
Thank you,
James
Private info removed as required by the Terms of Service.
Message was edited by: Admin Moderator

Thanks for the additional information jdeguilio!
No issues noted for North Attleboro. Please reprogram and test. To reprogram please pull the SIM card for one minute, then reinsert and power off/on. I see that you are using the same SIM from previous phone and this should not be a problem; however, if you accidentally touched the golden portion of the SIM card that could cause some issues. If reprogramming does not improve, try a new SIM card. You can get one for free at any Verizon Wireless http://bit.ly/3SdsA corporate store.
AntonioC_VZW
Follow us on Twitter at www.twitter.com/VZWSupport

IMac not connecting to network when booted into Mountain Lion Installation Partition

Similar Messages

Maybe you are looking for