IMac won't restart after installing OS X 10.6

All I get after installing Mac OSX 10.6 Lion, is a spinning wheel of death. What is going on that it won't restart properly?

Nevermind, I have found a work around. Have to start in "safe mode" then the Setup Assistant will launch properly and the Software Update also works properly.
On to Lion & 10.8!
Thanks for reading my post.

Similar Messages

  • MacBook Air won't restart after installing Mavericks

    My MacBook Air (v Fall 2011) won't restart after installing Mavericks.  I have done the instal several times, done the disk repair, I have had 2 visits to the local Apple store where they installed Mavericks with their software only to return home and have it fail again.  Does anyone know of issues with the SSD or memory?
    Next visit to the Apple store is Tuesday morning 12-17-13.  Anywthing that can help us would be appreciated.  Tks David

    Ok. Nevermind. I guess I had to Force Quit/Relaunch Finder.

  • IMac Won't restart after Wi-Fi update 1.0

    I installed the Feb. 24 Wi-Fi Update 1.0 and got the prompt to restart now, which I did.  Now my iMAc will not restart.  It hangs on the gray screen with the Apple logo.  Any help?
    Thanks!

    Try restarting in Safe Mode , then navigate to System Preferences - Startup Disk and make sure the internal drive is highlighted. When it's highlighted then restart using the restart command in the preference and let the machine re-start normally.
    If that does not help then attempt restarting, when you hear the startup tone hold down the Option key and choose the Recovery partition and then choose Disk Utility. While in DU Repair Disk Permissions (do it 2x to be safe) and while you are in DU it won't hurt to run Repair Disk as well. After you have completed both quit DU then restart normally to test.

  • 20" imac won't restart after rebooting under bootcamp running Windows XP. I get a black DOS screen with an error message.

    My imac has been running without problems under OS X Snow Leopard and bootcamp running Windows XP for a long time. I had received a Sony MP3 player and wanted to install the software on my computer. At the time I had a CD in my drive slot because I was getting ready to install some brother's software for a printer I wanted to use. I restarted my imac under bootcamp and started installing the Sony software in Windows XP. I was having problems with the install  and decided to restart XP to see if that would help. It's been several days since this originally happened so I'm not of sure of any more specifics at this point other than I've had to use windows machines for a long time and know that basically when in doubt "restart".
    When my imac was restarting I heard everything spinning up, the white light came on, but I heard no chime, a blue screen came up for about 15 to 30 sec. and then it went to a black screen with DOS characters giving the following message:
    Windows could not start because the following file is missing or corrupt: <Windows root>\system32\hal.dll. Please re-install a copy of the above file.
    I do have a copy of Windows XP, but my first problem was that I still had a CD in the slot and it would not eject. I tried every keyboard combination I could find including: eject button, F12 and holding down the mouse button at start-up and nothing worked. I also tried every other start-up keyboard combination I could find at Apple Support jut to see if I could get my imac to start up under OS X . I finally went on youtube to find out how to remove the CD. I ended up opening up my imac and taking off the cover of the CD drive to remove the disk. After putting everything back together I put in my Windows CD and tried restarting again. The exact same thing happened and I ended up at the DOS screen. Then I thought maybe my keyboard wasn't working so I replaced it with a new one. Same result. I also thought to plug both of my apple keyboards into my windows 8 laptop (hate it!) to see if they worked there at all. They both did so I'm sure the keyboards are not the problem.
    At this point, since I do now have a windows 8 laptop (hate it!) there is no remaining reason for me to keep a bootcamp partition on my hard drive. My question is where do I go from here? I have a current time machine back-up on an external hard drive and I have my install CD for OS X Snow Leopard. How do I get my imac back up and running? Thanks.

    Can you OPTION boot? If so, then choose the OS X volume to boot back into OS X. From there you can use Boot Camp Assistant to remove the Windows volume and restore the drive.
    Boot Using OPTION key:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the
          "OPTION" key.
      3. Release the key when the boot manager appears.
      4. Select the desired disk icon from which you want to boot.
      5. Click on the arrow button below the icon.
    Five ways to eject a stuck CD or DVD from the optical drive
    Ejecting the stuck disc can usually be done in one of the following ways:
      1. Restart the computer and after the chime press and hold down the
          left mouse button until the disc ejects.
      2. Press the Eject button on your keyboard.
      3. Click on the Eject button in the menubar.
      4. Press COMMAND-E.
      5. If none of the above work try this: Open the Terminal application in
          your Utilities folder. At the prompt enter or paste the following:
            /usr/bin/drutil eject
    If this fails then try this:
    Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

  • Won't restart after installing updates

    Hi everyone,
    I downloaded the 10.5.2 upgrade through the software updater, and my computer crashed during installation.
    When I tried to restart it, it got stuck on the grey apple logo screen, with the progress cycle spinning. It stays stuck like this for an hour.
    I tried safe mode restart then (with the shift key help down), and that didn't help anything. Is there anything else I can try?
    Thanks!

    Hi there,
    I have had the same problem after installing the update. The system hang at this position with all fans running for which I have shut down the computer each time but with the same outcome after new booting. Lastly, I booted holding the C key and this worked. Might be a coincidence, worth a try.
    Cheers

  • My Early 2009 Mac Pro won't restart after installing Mavericks

    I have installed Mavericks on my Early 2009 Mac Pro and all seemed to install just fine but when I restart the Mac then it won't get past a grey screen with Apple logo. It seems that it does get reasonabley far into the startup, it gets passed the grey screen with cricling progress thingmy under the Apple logo, then it flashes very quickly and after that it is a grey screen with the Apple logo and no further.
    I did try installing Mavericks when it first came out and I had this problem so I just abandoned and reinstalled Mountain Lion from my Time Machine backup. However I thought that with Mavericks now at 9.1, maybe it would work okay this time but no change. However this time I do want to get it working because the lastest Final Cut Pro X requires Mavericks and I do a lot of video editing.
    Here are the things I've tried which have made no difference:
    Removed all peripherals, so that now nothing is plugged in except the original Apple Keyboard, my Apple trackpad and my Eizo monitor.
    I tried starting it in Safe Boot mode but this made no difference.
    I started it up in Recovery mode and it will start in Recovery mode. While in Recovery mode I checked the startup hard drive with Disk Utility, the drive is fine, as and I repaired disk permisions which made no difference.
    I zapped the PRAM.
    I connected it to my MacBook Pro in Target Disk mode and used ProSoft's Drive Genius 3 to check over the startup hard drive again and check disk permissions and all is well.
    It still will not startup
    I would be most grateful if someone could assist.

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
         a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 3
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 4
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 5
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 6
    Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 7
    Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 8
    Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 9
    Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
    Step 10
    This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 11
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • IMac won't restart after latest security update

    I have a late 2007 20" iMac with OS 10.10.2. While we were away last week I asked my son-ln-law to send me a photo off my iMac. He started the iMac and sent the file no problem. While he was on there he asked if he should run the security update while he checked the house so I said sure why not. He ran the update and came back in a few minutes and mac was off. He tried to restart it but it won't continue. It starts, the chime sounds, the Apple logo appears, it goes about 1/3 the way through the progress bar then sits there about 2 minutes and then shuts down. Trying to help with good intentions he found my Snow Leopard disk and inserted it thinking he might be able to use Disk Utility to eject the disk but since the disk is mounted an error message says the disk cannot be ejected. Not knowing what to do he just held the power button and it turned off.
    Now that I'm back home I can't eject the SL disc and not sure what to do next. I've tried everything Kappy suggested here but nothing works. Unknown to my son-in-law I do have a Yosemite USB bootable drive but how do I run it with the SL disc in the DVD drive? I'm assuming I can restore from a time machine back up but with the SL disk in there does that cause a problem? I can see the Yosemite USB disk along with the SL disk in Disk Utility but not sure what to do if anything at this point. Suggestions?

    Well I managed to get the Snow Leopard disk out and restarted the mac using OS X Recovery. I've selected the option to reinstall OS X. I'm at a screen that is asking me to 'Select the disk where you want to install OS X'. I'm presented two options one labeled 'EFI' and the other 'Recovery HD'. I chose the later but it's been sitting on a spinning beach ball for 30 minutes now so I can't select 'Install' to proceed. Any idea what has happened to my mac? A hard drive failure I assume or something else?

  • IMac won't restart after latest Safari update.

    I just downloaded the latest Safari update (5.1.2) on my iMac (27", i7, latest Snow leopard).  The download (via software update) and install went smooth but when asked to restart, it hangs up at the gray screen...after the blue screen/start up chime, but before the apple logo appears. I tried shutting down and rebooting but it keeps hanging at the same place. 
    Thank you in advance for any successful solutions!
    Kind regards,
    Mark

    Hi all,
    Thank you for the replies...
    I did manage to solve the problem right away by following the instructions offered by Apple:  Remove all USB cables, then do a hard reboot.  Then to isolate the cable causing the problem, plug in one at a time and reboot until the problem happens again.  In my case, the issue was caused by a Flip Camera that was plugged into a USB hub. 
    I hope this helps those with a similar problem.
    Regards,
    Mark

  • IMac won't restart after crash

    Hi all,
    While surfing the Web with Safari, the system crashed, that is the display was blocked, it was possible to move the cursor with the mouse but nothing else, <option><Command><esc> was inactive as well, so I restarted the computer with the power button.
    Then I got a very funny screen, with a kind of "Vichy" pattern, that is full of small pink squares. I could see the apple logo with the turning wheel for while, then nothing, no reaction to the mouse or the keyboard (I plugged a USB KB).
    I restarted the imac several times, with the same result each time.
    Eventually, I launched the full Apple Hardware Test utility. After a 45 minutes, the test did not detect any HW problem.
    I restarted then the mac again, and everything was fine again.
    So the basic problem is solved but I don't have any idea of what can have been wrong and why it's OK again.
    In the system log I only have that that seems suspicious:
    +Aug 28 14:29:44 imac-g5-de-david kernel[0]: 0x96e0a9fe+
    +Aug 28 14:29:44 imac-g5-de-david kernel[0]: ** ASIC Hang Log End **+
    +Aug 28 14:29:45 imac-g5-de-david kernel[0]: ATIRadeon9700::waitfor_rbspace: Overflowed block waiting for FIFO space. Have 2, need 5. RBBM_STATUS 0x80036100+
    +Aug 28 15:25:03 localhost kernel[0]: standard timeslicing quantum is 10000 us+
    Does it ring a bell to somebody? Is there something I should check to understand what happened?
    I feel I have had several crashes while surfing the web since the last OS update...
    Thanks for your help!
    David

    Unfortunately I don't have yet another Mac (though this can be the chance!)
    i found another way: when I boot on the install disc, I can open a terminal and I have then access to my 'Macintosh HDD, with all its data (basically the 'Users' folder, and I have access as well to external HDD (as long as they are formatted OSX apparently, those formatted for windows cannot be mounted by the disk utility).
    I tried a basic "CP -R adirectory_inUsers destin_firewireHDD" and it seems to work. As soon as I get a new external HDD I'll try to copy all my data in this way.
    Thanks a lot for your help.
    David

  • Won't restart after installing Mavericks update

    i have a Mac Mini that's about 1.5 years old.  I ran time machine and downloaded Maverick and installed it.  It went to restart and never came back on.  Any ideas?

    Fixing a Mavericks Installation Problem
    How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
    Try these in order:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
         after the chime press and hold down the OPTION key until the boot manager screen appears.
         Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Power Mac G5 won't restart after installing 10.4.10 update

    Good Morning,
    Last night I finally updated my Power Mac G5 to Tiger. That went just fine and I verified that everything was still functional and I could still connect to the web via my DSL. No problems yet...
    I then downloaded the 10.4.10 update from Apple and installed it. When asked for Restart or Shutdown I chose Restart. The beginning of my problem. Upon restart I got the chime and the grey screen with the apple logo followed by the spinning stopwatch icon. It just kept spinning...for like 20 minutes. Then the fans started to wind up louder and louder and the spinning stopwatch icon stopped in it's tracks. I shut it down. It happened again.
    Suggestions?
    Trying to start from a disc (while holding down the "C" key) didn't seem to work any differently and wound up at the same result. Ironically, it just came out of the extended Applecare warranty this past February.
    Thanks for any suggestions in advance,
    Jim

    So you can't use Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk? It won't get there? If it does, does your drive show up, and what is it's S.M.A.R.T. status please?
    You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them.
    Cheers!
    DALE

  • Imac won't restart after time machine restore

    I restored my external firewire 800 hard drive from a time machine restore using my snow leopard insall disk.  The restore function said the restore was successful.  But when the computer restarted I got the folder with the question mark icon.  My internal hard drive went bad a year ago. 
    What to do?

    Did you restore the entire contents of your Mac from the Time Machine backup?  Was Time Machine backing up everything?
    Try booting with an "option" key held down.  That will show the internal disk volume if it has a bootable copy of OS X on it.
    You might try installing OS X over the top of what's currently on the disk.  If that doesn't help, erase the disk, install OS X on it, then use Setup Assistant (unless I'm misremembering and it's actually Migration Assistant) to transfer the TIme Machine contents again.
    Incidentally, after things are working again, the first time Time Machine runs it will back up everything again.

  • IMac won't boot after install of itunes 7.6 with ipod connected

    Just an FYI for anyone that comes across this issue. If you do, just disconnect your
    ipod and the system will boot up.

    Hi Dean, and a warm welcome to the forums!
    Unbeknownst to you, you had problems on your HD before the update.
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
    The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
    Some people get away without Repairing Permissions for years, some for only days.
    If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
    If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
    An Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc...
    http://docs.info.apple.com/article.html?artnum=107120

  • Computer won't restart after installing ITunes

    Hello!
    I really need some help with getting my itunes to work. I go to itunes.com and download the newest version, which I believe is 10.1. I go through the entire install and everything works fine and it seems like there are no issues. Then, when i'm done using the computer, I shut it down. The next time I go to start up my computer it gets stuck on the "please wait" part of the welcome menu and just stays like that forever. So what I have to do it restart my computer and get into the Repair your computer section after pressing F8 and I do a system restore which wipes my computer clean for the entire day.. Anyone know how to fix this problem? I've tried downloading itunes at least 8 times and it always does the same thing!

    So not a issue with the Windows installation. That suggests a conflict between iTunes and another program or driver that is ramifying through to the startup trouble.
    Do you have a version of iTunes of any sort on the PC? If so, in that version, in iTunes go "Help > Run Diagnostics. Leave all four boxes checked, and click "Next".
    When you get through to the final screen, click the "Copy to clipboard" button and paste the results into a reply here.

  • IMac won't restart after updating to 10.6.8

    I just installed the update of Mac os x from 10.6.7 to 10.6.8 and I clicked on install and restart in system updater and my computer usually goes to the blue screen for a split second before it shuts down and restarts, well it stayed for more than a split second. I installed it at around 5, it's now 12. It hasn't shut down yet and it's still stuck on the blue screen. It seems to be stuck on the booting down process. Any suggestions? I'm somewhat computer savvy but use layman's terms please.

    Hi,
    A couple of things to try...
    Firstly... use the Power Switch to turn it Off...
    Then do a SMC Reset... Instructions Here:
    http://support.apple.com/kb/ht3964
    If you are still not happy... Download and Install the Combo Update:
    http://support.apple.com/kb/DL1399
    And it probably wouldn't hurt to do a Permissions Repair (using Disc Utility) and a Restart
    Hope this Helps,
    Cheers,

Maybe you are looking for