Image constantly reloading and freezing after external editing

After going through the following steps:
Select an image in LR3
Edit in an external application - doesn't seem to matter which one
Select "Edit Original"
Save and Exit external application
Return to LR,
Any further edits - crop, noise reduction, brush stroke, doesn't matter what, triggers LR to convulse.
By that I mean, if I attempt to apply a crop, the image blinks, zooms in, and you see the word "Loading" appear. In other actions, it just blinks, the sliders freeze, "Loading" appears, and after a few seconds, it releases. Then a few seconds later, it goes through the cycle again.
Only by exiting LR and reopeing it can I continue to work on the image without constant interruptions like the above. I know that in Develop mode, the program has to load the adjustments but why is that they don't occur with nearly the same frequency if you exit and reenter LR.
Is this bug in the program?

Try the following:
In Edit > Catalog Settings in the Metadata Tab uncheck "Automatically write changes into XMP".
If you want to save your changes into XMP do it manually via Ctrl/Cmd + S or via Metadata > Save Metadata to File.
WW

Similar Messages

Images change position and dimension after client edits on admin console!

Hi,
1. After my client uploaded his images onto the site using the admin console they changed position slightly and did not fit exactually into the image frames i had set when i first made the site.
2. When i opened the site on muse and merged changes the images positions and dimensions changed even more than what was being diplayed on the live site? (E.g I originally had two columns of square thumbnails for some slideshows and now i have a single column of rectangle images)
3. I republished to see what would happen it now displays the way it was diplaying in Muse. The site is: www.jacobbuckland.co.uk
My understanding was that when i create an image frame or gallery in muse that any image uploaded via the admin console should fill that frame no matter what the size or dimensions of that image?
Any help gratfully received. Thanks

Our technical team managed to find the immediate cause for the problem, and a solution.
According to them there was a corruption on a speciffic OLAP file. By deleting it, they allowed it to be recreated on the next application processing. The file in question was found in \Microsoft SQL Server\MSSQL.2\OLAP\Data\UGF.0.db\<APPLICATION>.38.cub.xml
Where <APPLICATION> is the name of the problematic cube.
After that everything is working.

CPU is constantly overheating and freezing Satellite Pro A30

Hi guys,
It appears my CPU is constantly overheating and freezing the PC.
(is this what happens when a CPU overheats?)
The fans are switching on/off eratically.
The heatsink seems quite hot but still touchable - although just.
As a trial I'd like to change my 2.6Ghz CPU for
a slower, cooler one to see if it solves the problem.
Can I just swap them, or do I need to change something
to ensure the new CPU runs at the slower speed ?
Is there anyway I can tell the current CPU to run
at a slower speed ?
(I cannot even get windows installed as
the PC stalls before finishing)
Thanks,
Ray.

As mentioned by James the Power saver controls the CPU speed and the cooling method.
You can change the settings and check if it will help.
But one question; How long do you use this notebook or how old is it?
Sometimes after long usage the dust and debris could has a bad influence on the cooling modules and fan rotation.
Mostly a cooling module cleaning could help to prevent from the overheating. But I would not recommend to clean the notebook yourself if you have no experience.
In my opinion a technician should do that.

I install Mountain Lion on my MacBook Pro and freezing after waking up and is impossible restart

I install mountain lion on my macbook pro late 2009 and freezing after waking up and is impossible restart

Restart your mac in Safe Mode by holding down the 'shift' key while it powers up. You'll know if you've entered Safe Mode correctly if you see a progress bar underneath the grey Apple logo screen. Let go of the shift key when you see that, wait for the progess bar to complete then log in.
After log in, go to
 > System Preferences... Users & Groups and remove everything from the 'Login Items' tab.
If you have any anti-virus software installed (Sophos, F-Secure, VirusBarrier, Mackeeper) uninstall it while in Safe Mode.
Restart your mac normally and test.
Any improvement?

MacBook Pro makes a noise and freezes after I open the lid and awake it from it's sleep after installing Mt. Lion. How do I fix this?

Eversince I installed Mt. Lion my Macbook Pro has been making a long "beeeeeeep" noise and freezes after I try to awake it from it's sleep by opening the lid. How do I fix this problem?

Either the license files were not transferred or it has to be relicensed.
Remove and then re-install aperture. On an rMBP this should take only a couple of minutes.

IPad crashing and freezing after 8 ios updates

My iPad 1 has been crashing and freezing after completing the most recent ios updates, what could be wrong?

Can there be any person who can say that Apple treats customers as valuable persons ?
Way how IPAD 2 users are treated, served and issues solved shows clearly how they just care of new purchases. All crashes, slowness, battery consumption, extremely bad user experience with slow and jamming UI etc... Anyway this is over now with me as I'm moving out from IPAD / IOS due this experience. Ride was a good but now its over as trust is totally destroyed by Apple.
br JJ

Skype constantly buffers and freezes on my phone (...

My phone constantly buffers and freezes. I have a Nokia Lumia 530 phone and I'm always having problems.

This phone is probably not the best one for Skype, but if you were using 3G then please try to use Skype over Wifi. Also make sure you have the latest Skype for Android.
If the call quality is still not good and constantly dropping out then you may request a refund. There's not much we can do on our side regarding connection.
https://support.skype.com/en/faq/FA297/How-do-I-request-a-refund
Andre
If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

My FCP7 application is constantly lagging and freezing during playback.

I am working off of a 4TB external HD with nearly 2TB of free space. I am constantly getting no playback after about 30 seconds of uninterrupted playback, sometimes less. I have trashed my preference files and still have had no luck. This is bringing my workflow to a standstill and I am about to start missing deadlines. I need help ASAP. any suggestions?

do you have at least 20% free space on your startup drive?
Do you have multiple external drives connected? Try disconnecting everything but the media drive.
How is the g-tech drive connected? Firewire? Thunderbolt?
You might be having a drive problem. Run applications: disk utility: drive repair on all drives. You'll need to boot of your install disk or restore partition to run it on your startup drive. I'd also suggest getting and running DiskWarrior. It's saved my life a few times
http://alsoft.com/
You might do some googling and find a drive speed test application to see if there's an issue with the g-tech.
And here's a user tip with a bunch of troubleshooting steps
https://discussions.apple.com/docs/DOC-2591

Problem with filters not finding an image in LR 4.0 after being edited in Photoshop CS6 beta

I am running Lightroom 4.0 on a Win7 Professional 64-bit system. I have come up with a strange problem I can describe but don't know how it can more generally be duplicated, unless this is a Photoshop CS6 beta bug.
I am looking through in Library module at a shoot. When I filter by a keyword that some of the pictures have, a recently edited image does not show up. Here is what I mean; let X=IMG_6260:
1) For X.CR2, edit in Photoshop CS5. All works well - X-ed.tif gets created and added to my LR previous import set.
2) Clicking on X-ed.tif, edit in Photoshop CS6 beta. All seems fine - X-ed-2.tif gets created and added to my LR previous import set.
3) The keywords on all three images - the original and the two edits - are the same. I can confirm that by, in grid view, selecting these three and noting no asterisks in the composite keyword view. One of the keywords is the person's name - let's say it is "Sara".
4) Now, when I click in the keyword list on "Sara", all images in this most recently imported set show up with her *except* X-ed-2.tif - the one created by CS6 beta.
Strange! Should this be reported in a CS6 forum? Thanks.

Yep, it returns nothing. Debug output seems to be largely irrelevant except this oddity:
-- Debug: Received Message:
-------------------------- BEGIN NETLINK MESSAGE ---------------------------
[NETLINK HEADER] 16 octets
.nlmsg_len = 36
.type = 2 <ERROR>
.flags = 0 <>
.seq = 1421583995
.port = 1853883468
[ERRORMSG] 20 octets
.error = 0 "Success"
[ORIGINAL MESSAGE] 16 octets
.nlmsg_len = 16
.type = 16 <0x10>
.flags = 5 <REQUEST,ACK>
.seq = 1421583995
.port = 1853883468
--------------------------- END NETLINK MESSAGE ---------------------------
Message type = "error" with a message = "success"? Not sure if this is normal or not

s:BitmapImage get image scaled size and position after it loaded and scaled

I am try to know the dimensions of the uploaded image into <s:BitmapImage without success.
The data coming back to me are isthe real image size and not size after it was scaled to fit the component size.
I can see that the image scaled down and fit to the maxWidth, but I can't get the actual/real scaled width from the BitmapIMage properties.
I tried:
<s:BitmapImage id="mainBitMap" ready="mainBitMap_readyHandler(event)" complete="bitmapimage1_completeHandler(event)" source="{data.Thumbnail.URL}" maxHeight="250" maxWidth="250" scaleMode="letterbox"/>
protected function bitmapimage1_completeHandler(event:Event):void{
trace("----------------------Start-----------------------");
trace("mainBitMap.bitmapData.width" + mainBitMap.bitmapData.width);
trace("mainBitMap.width" + mainBitMap.width);
trace("mainBitMap.measuredWidth" + mainBitMap.measuredWidth);
trace("mainBitMap.displayObject.width" + mainBitMap.displayObject.width);
trace("mainBitMap.explicitWidth.width" + mainBitMap.explicitWidth);
trace("mainBitMap.preliminaryWidth" + mainBitMap.preliminaryWidth);
trace("mainBitMap.sourceWidth" + mainBitMap.sourceWidth);
trace("-----------------------End------------------------");
Result:
----------------------Start-----------------------
mainBitMap.bitmapData.width=435
mainBitMap.width=0
mainBitMap.measuredWidth=0
mainBitMap.displayObject.width=0
mainBitMap.explicitWidth.width=NaN
mainBitMap.preliminaryWidth=NaN
mainBitMap.displayObject.preliminaryWidth=435
-----------------------End------------------------
Thanks,
Nimrod.

Hi,
I tried the ready event, But I still receive the same results.
I expect to get the new scaled width And height according to the maxHeight and MaxWidth.
I see that the image scaled to fi it But I can't recive the new size of it.
Thanks,
Nimrod

MBP 13" Screen Flickers and Freezes After Upgrading HDD

Hi There,
I have seen on here and a few other forums that people are having issues with graphics cards or overheating that is making the MBP screen flicker and freeze.
Mine has been fine until yesterday when I installed a new Seagte 1tb HDD. It works ok, but every now and then the screen starts to flicker, half of it goes black and the system freezes. Sometimes it's just for a few minutes, but sometimes I need to do a hard reset by holden the power button down for 5 seconds.
Here are the details:
MBP 5,5 13" (2008 I think - Can't remember)
Boot ROM Version:
MBP55.00AC.B03
SMC Version (system):
1.47f2
Version 10.6.8
2.26Ghz Intel Core 2 Duo
8gb 1067 Mhz DDR3 (Just upgraded, but before the hard drive and no issues)
1TB Seagate Momentus SATA HDD
As mentioned, I upgraded the RAM a week or so ago and it has been running fine. I put the new hard drive in last night and after a few hours, the flickering started.
I cloned the hard drive using SuperDuper and it all started up fine.
So far, I have verified and repaired permissions, checked SMART status and run a SMART Utility diagnostic. All comes back ok.
I cleared the PRAM and installed smcfan control as another forum with similar issues said it was a overheating problem and running the fan control program should fix it. I did that at 8am this morning and it has run great all day. Come 5.30pm, the flickering started and then it froze.. GREAT!!!!
It's so frustrating, I was really looking forward to having my MBP upgraded and running fast again.
Any ideas or tips would be very welcome.
Thanks in advance.

set old HD. If problem will gone - you have weakened power supply or internal power converters. Yours new HD draw more power during spinup or something - so voltage on internal bus lowers and memory or videocard freaks.
5.30 PM looks like a time when there begins a lot of load on city energy grid - so voltage in wall socket goes a bit unstable, it may also add to problem.
if problem is gone when you are on battery power - its power supply. If it persists or get worse when on battery - its internal power convertors.

Adobe 8.1.2 Hangs and freezes after opening

Every time I open a document or Adboe itself, it will freeze and hang after 30 seconds.

I am having the same issue in acrobat 9. I though it was the alst update, but no.
http://forums.adobe.com/thread/567998

Quicktime video skips and freezes after exporting from FCP

I have tried exporting from Final Cut a few different ways, but my QT file had short skips and freezes in the video (the audio is perfect).
I have done this same thing several time with no problems at all. What am I doing wrong?

DETAILS
What are you exporting?
How are you exporting... QT Movie, Conversion, what settings?
What drive are you exporting to?
What version of FCP and QT?

Why do re-named images changed back to original name after external editing

I batched re-named a number of images, but when i took one of the renamed images into PS by via the Aperture external editor the retouched file reverted to its original name when it came back into Aperture..... Why is this so? eg Original name was "STE_2200" then i added "2009" to all files to make this files new name "STE_22002009" but when it came back from PS via external editor it was "STE_2200" again. Why might this happen?

The above answer is correct. Renaming in Aperture after import only changes Aperture's VERSION NAME. The FILE NAME on your hard drive remains unchanged. Officially you can rename file names on import or export, but you can also do it when just moving the photos. For instance, from Managed to Referenced or from one managed location to another managed location, etc. I can give more details if anyone likes.

Why has my native windows 7 Pro-64 network to a windows 7 Pro-64 VM has slowed to a crawl and freezes, after the new Arris cable modem was installed?

Please appreciate the details, so the complete situation can be visualized:
The office network:
New Mac Mini PC running Win 7Pro 64, (in boot camp), networked to an iMac running the same Win 7 Pro 64, VM, UNDER Fusion 7Pro.
To review: My treatment rooms former dell PC/running vista business/ running the server and network versions of my Dental practice mgmt & X-ray capture apps, had no probs WLAN to the front desk iMac running the same PC client dental network apps under the same vista business, & Fusion 4. The dell slowly fried its power supply .
I could not wait to replace it with a Mac mini/ boot camp/ win7 pro 64 bit, as it has to run natively to capture X-rays. The front desk iMac was also upgraded to os10.10.3/ Fusion 7pro/ and its own matching Win7 pro 64bit. The iMac is wired and WLAN connected to a netgear d600 router and a Time Warner Cable modem. The modem then failed and was replaced by an arris modem. As the Arris was configured out of the box, the network ran much slower slowed, as compared to the original modem. BUT- The Vonage 2 line phone system stopped working- no incoming or outgoing voices could be heard after it rang. Then twc remote configured it and the phone now works, but the network iMac slowed to a crawl, and now freezes when accessing the Mac Mini PC dental server to edit or enter data. The Mini perfectly accesses the internet via wifi. It accesses the front desk canon printer by wifi, and can print share they the iMac that is wired to the printer, as well, BUT, the network connection is a spinning pinwheel. The front desk imac easily finds the Mac Mini PC server on the network. It connects easily by entering the servers IPv4 address SHOULD THAT last value change. But if data isn't entered in slow motion, the window and app freezes, and has to be force quit by Task Manager!
Cause:
1. I think TWC switched the cable modem from the default- Non Bridged, to Bridged mode. Could this be the cause?
2. The network setting in fusion, on the iMac is auto detect, a setting that always worked with vista and with the new Win7 system, before TWC installed the new arris modem. 3. Switching to NAT does not work at all is there a different setting to use?
3. Does the Netgear Router have to have a port or pref configured so as not to block the Server.
4. might in need an Access Point (I have an extra netgear wdr3400) ).
5. Do I need an Extender that plugs into the AC LINE?
I hope this info helps.
PS:(some addtl info:
1. File sharing works fine between the minis -Mac and boot camp sides and between the iMacs- Mac and VM sides and between eother side to or from either of the 2 computers! 2. Also either office computer and all of my my home macs , (& my iPad, & iPhone), can access each other instantly and flawlessly, with splash top streamer and jump desktop remote apps, as controller or as client! In fact, the front desk iMac can remote control the mini PC AS IF YOU WERE DIRECTLY ENTERING INFO I TO IT!
SO I think it's either a misconfiguration in the TWC cable modem &/or some additional pref to config in the router? Thanks so much for your help, (been using VM's since VPC1. & Win95 in a iMac, 1999, DV MODEL! (TWC BLAMES VONAGE FOR NOT OPENING SOME PORTS IN THE TELE MODEM. Vonage blames TWC FOR NOTopeningj ITS PORTS IN THE CABLE MODEM, when they meant the ports on the Netgear. They have passed the buck for 6 weeks with not even a guess at what to do. VERY FRUSTRATING! Again, thanks to all!

Okay Saint Steven, I'll bite:
I read your description multiple times, very carefully, and I am still confused. May I suggest the following:
* Follow basic troubleshooting procedures. Isolate each individual problem. Don't try to get everything working at once. Make one change at a time.
* If I read your description correctly, the Netgear D600 (??) Router is the office LAN (not WLAN). Connect each piece on the LAN separately one-by-one, and test each piece individually. Get your LAN and its devices working first. Forget about the Vonage and the Arris Cable modem.
* Next, look at your Internet connection. Again, try each piece separately. Depending on how the original cable modem and the new Arris cable modem are configured, you may also have to adjust the configuration of the Netgear D600 Router.
* Finally, if you are still having problems, try to organize your thoughts and presentation before you post again. List each element in your network. List how each element is configured. Be systematic.
"Arris cable modem" does not help much - some are simple bridges, others are routers, etc.
To answer your questions:
1. I can't tell from your confusing description, but I don't think so. It seems like the problems are associated with the system changes you made (replacing Dell, etc.) and the problems seem to be isolated to the local LAN.
2. Auto detect should work, but it is easy to change and test, as long as you change one thing at a time.
3. No. The Netgear router should allow all communications on the local LAN. Could you have put the "server" in the DMZ?
Note: I could not find a Netgear "D600" model in a web search. Do you mean N600?
4. No. I doubt that you need an additional access point. Based on your description, everything appears to connect to the LAN.
5. No. See 4.
To repeat myself:
* Do careful, systematic troubleshooting.
* Provide carefully written, detailed description of your network and system configurations when you ask for help.
Good luck!

Image constantly reloading and freezing after external editing

Similar Messages

Maybe you are looking for