Image Gallery giving LoadNeverCompleted on Server side
Ok so I have a basic site set up, I have a gallery page. When
I go to it....I have buttons on that page that you can choose
different galleries. My galleries load images via XML....when I
click on a gallery, and it doesn't load all the pictures first
within the thumbnails and I try to go to a different gallery on
that page or even try to go to a different page within my SWF, it
gives me this:
Windows Internet Explorer:
An error has occured while trying to load file ! [Error
code: LoadNeverCompleted][HTTP status: 200]
Is there anyway to code my swf so that it will still go to
the next gallery or page without throwing that error up, as to seem
..... seamless? Even if it didn't load the previous gallery and
images completely? I really need help on this one.
Thanks much in advance.
Is there anyone that is even going to attempt to try and help
me or does everyone just want to skip this one....I know I'm not
the only one out here who has run into this issue. Please
help!
Similar Messages
-
Create image from byte[]array on server side
Hello everyone..
I'm developing an application which will take snapshots from a mobile device, and send it to my pc via bluetooth. I have my own midlet which uses the phone camera to take the snapshot, i want to transfer that snapshot to my pc.
The snapshot is taken is stored in an array byte.
The image can be created on the phone itself with no problem using : image.createImage(byte[])
my problem is that when i send the array byte via bluetooth, and receive it on the server, i cannot create the image using the :image.createImage() code
The connection is good since i have tested by writing the content of the array in a text file.
Piece of midlet code:
try{
stream = (StreamConnection)Connector.open(url);
OutputStream ggt = stream.openOutputStream();
ggt.write(str);
ggt.close();
}catch(Exception e){
err1 = e.getMessage();
}where str is my array byte containing the snapshot
And on my server side:
Thread th = new Thread(){
public void run(){
try{
while(true){
byte[] b = new byte[in.read()];
int x=0;
System.out.println("reading");
r = in.read(b,0,b.length);
if (r!=0){
System.out.println(r);
img = Image.createImage(b, 0, r);
//other codes
i get this error message:
Exception in thread "Thread-0" java.lang.UnsatisfiedLinkError: javax.microedition.lcdui.ImmutableImage.decodeImage([BII)V
at javax.microedition.lcdui.ImmutableImage.decodeImage(Native Method)
at javax.microedition.lcdui.ImmutableImage.<init>(Image.java:906)
at javax.microedition.lcdui.Image.createImage(Image.java:367)
at picserv2$1.run(picserv2.java:70)
Please anyone can help me here? is this the way to create the image on the server side? thx a lothere is exactly how i did it :
while(true){
byte[] b = new byte[in.read()];
System.out.println("reading");
r = in.read(b, 0, b.length);
if (r!=0){
Toolkit toolkit = Toolkit.getDefaultToolkit();
Image img = toolkit.createImage(b, 0, b.length);
JLabel label = new JLabel(new ImageIcon(img) );
BufferedImage bImage = new BufferedImage(img.getWidth(label),img.getHeight(label),BufferedImage.TYPE_INT_RGB);
bImage.createGraphics().drawImage(img, 0,0,null);
File xd = new File("D:/file.jpg");
ImageIO.write(bImage, "jpg", xd);
System.out.println("image sent");
}Edited by: jin_a on Mar 22, 2008 9:58 AM -
My company currently has a back end image rendering engine
built in Java. The rendering engine serves up images on request to
a Flex User Interface through web services. What we have discovered
through benchmarking is that Flex (or the Flash Runtime) is able to
complete simple renders even faster than Java.
So I wondered... can we tap into some of these Flex image
manipulation libraries on the server side?
We would love to develop the entire rendering engine in Flex.
Unfortunately there are some downsides to this such as increased
bandwidth usage since the large raw images used to create the final
rendered image would all need to be transfered over the internet to
the client.
The ideal solution would be to develop the rendering engine
in Flex but have the Flex code run on the server.
Is this possible? Can anyone comment?
Thanks,
Leo LeeWell, you can create a Flex component/module/app/etc. and put
it on the server. Client can so something that results in request
to server, and part of server response is to do processing on
server using that rendering engine. Just a matter of calling it on
the server from the initial point of client request contact. -
What is happening to my image gallery?
I have created the layout for my site and I have an image gallery on the right hand side. By default the upper left thumbnail opens as the main picture. If you click on that thumbnail, it swaps the image, yet the thumbnail disappears and a question mark appears. This only happens on that thumbnail and it happens on every page.
This is my site in development stage.
http://test.taffyproductions.com/index.htm
Thanks,
GaryYou have the rollover wrong on that first thumb.
Here is its code:
a href="#">
<img id="thumb_01" width="80" height="60" onmousedown="MM_swapImage(''thumb_01','','large_image','photo_large','','_images/home1_lg.png',1)" name="thumb_01" alt="home_1sm" src="large_image"/>
</a>
and here it is from another thumb:
<a href="#">
<img width="80" height="60" onmousedown="MM_swapImage('photo_large','','_images/home3_lg.png',1)" alt="thumb_3" src="_images/home_3sm.jpg"/>
</a>
Your first thumb is being told to swap ITSELF out with another image, followed by another partial copy of the arguments - it's simply malformed so remove the behavior on the first thumb completely and do it again.
That said, your gallery would be better set up with the onmousedown behavior (onclick is better actually) on the <a> tag around the <img> rather than on the image tag itself.
Hope that helps.
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia -
How to get path of image from server side in form of URL
Hello,
I want to access images stored on server side local folder. How do I create a URL for that. Images in the folder changes dynamically, so I should be able to display the new modified images. Please help me.
Thanks in advanceAre you asking from client side to access server (local folder) images...
if yes
where the security goes....
please be in detail... -
One of the banes of my existence is resizing the same image several times because of the various contexts it appears in. For example, the main image in an article will appear bigger than it will on the index page, where many article teasers are placed. Then there's the image that goes in the Facebook "share" og. Then there's... you get the idea.
Same image, different contexts, lots of Photoshop resizing, lots of files to keep track of... but I save on bandwidth.
On the flip side, I can target the same (large) image and simply downsize via traditional HTML (width/height) on the browser end, but that will mean downloading a file that is 50-75% larger than what is actually needed. If the front page teaser displays a 1280px image at 500px, that's a huge (and potentially costly) waste of bandwidth.
HOWEVER...
If I could do the same thing on the SERVER side... in other words, tell the server to take only the pixels it needs from the (large) image and serve only THOSE to the end user... then the same image could be used in each and every context, and only the necessary bandwidth is used.
Is this do-able? If so, what is the process formally called, and where would I begin to learn how to do it?
Thanks!That's amazing. I didn't think it was possible without saving files on the server first.
This will suit my needs just fine, but allow me to push my luck even further with the following "hail mary" question : would it be possible for the server to serve the PNG with a width of 100% of the container? In other words, the behavior would mimic width=100% but the server would still only serve as many bytes as are needed to fill that space.
Not only would I not have to create separate files for every resize (we fixed that problem with your suggestion) but I wouldn't even have to customize every link to a specific size.
I'm not expecting an affirmative on this one, but it was worth asking. =) -
Copy and paste images in server side folder
Hi ,
I want to copy & paste the images in server side folder .
Have you any idea than please send me.
Thanks.
Have a nice dayClient side: Reading/Sending file contents
FileInputStream in = new FileInputStream(filePath+"\\"+fileName);
int size = in.available();
byte data[] = new byte[size];
in.read(data,0,size);
in.close();
//calling remote method for sending file
uploadFile(fileName,data);
Server side method
public boolean uploadFile(String fileName,byte []data) throws IOException, ServerNotActiveException {
FileOutputStream out = new FileOutputStream(fileName);
out.write(data);
out.close();
} -
Copy & paste the images in server side folder
Hi ,
I want to copy & paste the images in server side folder .
Have you any idea than please send me.
Thanks.
Have a nice day[http://java.sun.com/docs/books/tutorial/essential/io/].
-
Image gallery: Open browser w/ 'Next/Back' button?
Howdy people. I am planning on making a photo gallery. I want
to have the user click on the first image - have a browser window
open then have a 'NEXT' 'BACK' and "CLOSE WINDOW" button in that
browser window. I know how to do all except the arrow part. Can
anyone help? Thank you so much!Create your second page so it's layed out the same way as the
first. The
next link simply points from one page to another as per
normal hyperlink.
You'll need to change the next link (and previous link) on
each page
manually.
So, page2.htm will have a previous link to page1.htm and a
next link to
page3.htm, and
page3.htm will have a previous link to page2.htm and a next
link to
page4.htm.
Or are you looking for more automated way using a server-side
language?
HTH,
Piers -
Hello All!
I am creating a dynamic image gallery, but when my external
images load in the empty movie clip, all the images are loading in
the same size/dimension. Does anyone know how I can command the MC
to load the images in different sizes, another words - to load them
according to its own size?
here's the AS
onClipEvent (load)
function imageMove()
var _loc1 = this;
for (i = 1; i <= num_of_image; i++)
mc = _loc1["image" + i];
if (i < hit)
tempx = small * (i - 1) + 30;
temps = small - 5;
mc.useHandCursor = true;
else if (i > hit)
tempx = big + small * (i - 2) + 30;
temps = small - 5;
mc.useHandCursor = true;
else
tempx = small * (i - 1) + 150; //distance of how far out the
displayed image jumps.
temps = big - 5; //distance between the displayed image and
thumbnails.
mc.swapDepths(1000);
display = txt
mc.useHandCursor = false;
} // end else if
mc._x = mc._x + (tempx - mc._x) / 3; //number of pixals on
x-axis the displayed image moves over to right side before growing
big.
mc._width = mc._width + (temps - mc._width) / 3; //number of
pixals on x-axis the displayed image moves over to left side before
growing big.
mc._height = mc._width * 4 / 3;
if (Math.abs(mc._width - temps) <= 1)
title._x = hit < 5 ? (_loc1["image" + hit]._x + big / 2) :
(_loc1["image" + hit]._x - big / 2 - 100);
title._y = 100;
} // end if
} // end of for
} // End of the function
function loopHye()
if (hit != num_of_image)
++_global.hit;
else
_global.hit = 1;
} // end else if
} // End of the function
getURL("FSCommand:allowscale", false);
big = 300;
//Large image width (400 works best for my portfolio site)
small = 60;//Small image width (40 works well for my
portfolio site)
num_of_image = 8;//Total number of images
timeGap = none;//Speed (speed of gaptime when each image is
displayed automatically. "2000" is default of this original file.
larger the number the slower the image changes. (type in "none"
will stop automatic images from changing.
_global.hit = 0;//First displyed image number (type "0" to
stop images from growing out)
txt = [" ", "image1", "image2", "image3", "image4", "image5",
"image6", "image7", "image8"];//insert text of each images between
for (i = 1; i <= num_of_image; i++)
attachMovie("image", "image" + i, i);
loadMovie("image/" + i + ".jpg", this["image" +
i].tar);//image folder path
mc = this["image" + i];
mc._x = small * (i - 1) + 30;
mc._y = 200; //where on the axis should the displays be.
mc._width = small - 5;
mc._height = mc._width * 4 / 3;
this["image" + i].onRelease = function ()
clearInterval(interval);
_global.hit = this._name.substr(5);
interval = setInterval(loopHye, timeGap);
} // end of for
interval = setInterval(loopHye, timeGap);
onClipEvent (enterFrame)
imageMove();
check out the file
http://www.wendiland.com/Gallery122b.fla
this is what the current gallery looks like
http://www.wendiland.com/print2.html
I'd appreciated if someone replies with any sort of
suggestions! thanks in advance!!!
- W£NDIif you google with "dynamic image gallery", you'll find a lot
of
tutorials & examples including pre-programmed solutions
if you prefer to do it yourself, you need to deal with
dynamic sites. DW
help chapters Preparing to Build Dynamic Sites, Making Pages
Dynamic &
Developing Applications Rapidly can also help to understand
in fact you don't need a database, the images can be read
from the
folder they're stored. that way to update a gallery you only
need to
remove/replace/add images. one folder for each gallery
and the application development forum is best suited for your
question
BTW, some nice photos in your page
hth,
jdoe
uvi wrote:
> I'm trying to create a dynamic image gallery that is
updated from a database, i
> managed to create a simple mysql database
> using phpmy admin, so I could update my image gallery
more often, I saw
> something that I like but I have no idea how to create
it here is the example:
>
http://flight001.com/store/trip.htm?itemid=307&sid=201&page=2
> I didnt manage to create this with dynamic table from
within dreamweaver 8,
> maybe I just don't know how,
> this is the link to a gallery on my website:
>
http://www.yuvallavy.com/work/scenic/scenic.htm.
I need all the help I can get
> I'm using dreamweaver 8 on a Mac and using PHP/MySql
server model.
> -
What server side objects to pin in shared pool?
On the first invocation of Java-based image.process(...), processing can take up to 30 seconds. Second run takes less than a second, but a final invocation a few hours later is back to 30 seconds. My DBA suspects that the server side objects are cached in the shared pool by the time of the second invocation, and then flushed out by the time the code is run a few hours later.
We tried "pinning" ORDSYS.OrdImage pl/sql package in the shared pool using dbsm_shared_pool.keep , but no success. What are the the Java server-side objects referred to the Intermedia Java Client that really does the work when the client-side image.process(..) is executed?
Thanks,
Brandonhi Mr.kesavan!
i tried .but i am getting some error.
when i give lookup (jndi) that time it is giving some error.
for example :
ic.lookup("Bean2");exactly this line i am getting some unmarshalling error.
Can u give me some sample code.?
thank u...
Shalinipriya. -
Image Gallery Created in Bridge & Dreamweaver CS4
Hello! I created an image gallery using Bridge and embedded the gallery html into a page on my website. The gallery, however, is not showing up live. Everything works fine locally.
Might anyone be willing to help me with my page?
I have my gallery embedded in this page:
http://www.stompandcrush.com/quisomnian.html
This is the gallery index html:
http://www.stompandcrush.com/graffitigallery_newyork_netaacc.html
Any help would be greatly appreciated!Hi Guys, This turned out to be a Unix server-side issue. Apparently the compression software being used by the ISP on this server was in some way incompatible. The ISP turned the compression off and the problem was cured.
Cheers, Daviddhg -
How do i use numbers for image gallery and arrows?
Hello there,
I'm hoping someone can advise me on the best possible way.
I would like to use numbers to help the user navigate through the image gallery i'm creating and arrows on either side of an image (one image viewed at any one time). I have attached an image of what i'm trying to acheive. I feel like the arrows will help aid the user to navigate and the numbers will inform them on the number of images to view.
I have so far created the site with a template (logo and nav bar) and child pages for: home/about/work/contact.
Hope to hear from someone soon.
NicolaWith so many pre-built image galleries available to you, there's no reason to re-invent the wheel.
CSS Image Viewer (view source to see the code)
http://alt-web.com/DEMOS/CSS-Image-Viewer.shtml
jQuery slideViewer 1.2
http://www.gcmingati.net/wordpress/wp-content/lab/jquery/imagestrip/imageslide-plugin.html
57 + Image Gallery, Slideshow & Lightbox solutions
http://www.1stwebdesigner.com/css/57-free-image-gallery-slideshow-and-lightbox-solutions/
In addition to the ones above, log-in to Adobe's Widget Exchange with your Widget Browser
http://labs.adobe.com/technologies/widgetbrowser/
* jQuery Cycle Widget
* Lightbox Gallery Widget
* Spry Content Slides
* Spry Image Slideshow
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
Problem with skin for server side buttons.
Hi,
I have a problem with the skin for server side renderd buttons.
In my CSS file I have :
.AFButtonStartIcon:alias
content:url(/skins/images/btns.JPG);
.AFButtonEndIcon:alias
content:url(/skins/images/btne.JPG);
.AFButtonTopBackgroundIcon:alias
content:url(/skins/images/btntb.JPG);
.AFButtonBottomBackgroundIcon:alias
content:url(/skins/images/btnbb.JPG);
JPG files in project are in dir "public_html/skins/images".
In WAR file,the JPG files are in "/skins/images" directory.
Skin configuration is correct because other settings from CSS
file are functioning fine after deploying.
But buttons are standard browser buttons and are not taking the images i have used.
In document provided by Oracle it says:
(Note: These icons must be specified using either context-image or
resource-image icons. Text-based icons are not allowed.)
I am nt able to understand what this means?Perhaps this thread will help.
JSF Skining Button Images
The doc should say whether or not the width/height is a requirement. But since it doesn't mention it, try adding a width and height.
- Jeanne -
Please Help, I can't figure this stuff out!
I've just built my second website and the code for clickable thumbnails for my image gallery doesn't work in Safari, unless I refresh the page. For some reason, a mouseover on a thumbnails fails to call the large image url. I tried adding an auto refresh to the code, but curiously that did not solve the problem.
Any ideas why this won't work in this Browser, but runs fine in IE and Firefox?
Thanks for any advice.
Here is the code:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="content-type" content="text/html;charset=ISO-8859-1">
<meta name="generator" content="Adobe GoLive 6">
<title>Welcome to Kimerlee Curyl - p h o t o g r a p h y - horses, pets, el faro, headshots, weddings</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<link href="../../web-content/styles.css" rel="stylesheet" media="screen" type+text/css">
<script language="javascript">
<!--
function openLinks(){
var linksURL = "about.cfm";
var linksWindow = window.open(linksURL, 'linksWin', 'menubar=no,toolbar=no,width=1024,height=768,resizable=yes,location=no,scrollba rs=yes,screenX=10,screenY=1,left=10,top=1');
//-->
</script>
<csscriptdict import>
<script type="text/javascript" src="GeneratedItems/CSScriptLib.js"></script>
</csscriptdict>
<csactiondict>
<script type="text/javascript"><!--
CSAct[/CMP/ 'bfc75fbb127'] = new Array(CSSetImageURL,/CMP/ 'first_image',/URL/ 'folder/images/farofinal/f15.jpg');
CSAct[/CMP/ 'bfc75fc8128'] = new Array(CSSetImageURL,/CMP/ 'first_image',/URL/ 'folder/images/faro2005/f14.jpg');
CSAct[/CMP/ 'bfc75fd2129'] = new Array(CSSetImageURL,/CMP/ 'first_image',/URL/ 'folder/images/farofinal/f13.jpg');
CSAct[/CMP/ 'bfc75fdd130'] = new Array(CSSetImageURL,/CMP/ 'first_image',/URL/ 'folder/images/farofinal/f11.jpg');
CSAct[/CMP/ 'bfc75fe8131'] = new Array(CSSetImageURL,/CMP/ 'first_image',/URL/ 'folder/images/farofinal/f9.jpg');
CSAct[/CMP/ 'bfc75ff2132'] = new Array(CSSetImageURL,/CMP/ 'first_image',/URL/ 'folder/images/farofinal/f7.jpg');
CSAct[/CMP/ 'bfc75ffd133'] = new Array(CSSetImageURL,/CMP/ 'first_image',/URL/ 'folder/images/farofinal/f6.jpg');
CSAct[/CMP/ 'bfc76008134'] = new Array(CSSetImageURL,/CMP/ 'first_image',/URL/ 'folder/images/farofinal/f5.jpg');
CSAct[/CMP/ 'bfc76014135'] = new Array(CSSetImageURL,/CMP/ 'first_image',/URL/ 'folder/images/farofinal/f4.jpg');
CSAct[/CMP/ 'bfc7601e136'] = new Array(CSSetImageURL,/CMP/ 'first_image',/URL/ 'folder/images/farofinal/f3.jpg');
CSAct[/CMP/ 'bfc76027137'] = new Array(CSSetImageURL,/CMP/ 'first_image',/URL/ 'folder/images/farofinal/f2.jpg');
CSAct[/CMP/ 'bfc76031138'] = new Array(CSSetImageURL,/CMP/ 'first_image',/URL/ 'folder/images/faro2005/faro1.jpg');
var preloadFlag = false;
function preloadImages() {
if (document.images) {
pre_photographyB = newImage('folder/dec_buttons/photographyB.gif');
pre_KimB = newImage('folder/dec_buttons/KimB.gif');
pre_docBb = newImage('folder/dec_buttons/docBb.gif');
pre_weddingsB = newImage('folder/dec_buttons/weddingsB.gif');
pre_editorialB = newImage('folder/dec_buttons/editorialB.gif');
pre_petsB = newImage('folder/dec_buttons/petsB.gif');
pre_headshotsB = newImage('folder/dec_buttons/headshotsB.gif');
pre_horsesB = newImage('folder/dec_buttons/horsesB.gif');
pre_bioB = newImage('folder/dec_buttons/bioB.gif');
pre_ppB = newImage('folder/dec_buttons/ppB.gif');
pre_contactB = newImage('folder/dec_buttons/contactB.gif');
preloadFlag = true;
// --></script>
</csactiondict>
<csactions>
<csaction name="bfc75fbb127" class="Set Image URL" type="onevent" val0="first_image" val1="folder/images/farofinal/f15.jpg" urlparams="2"></csaction>
<csaction name="bfc75fc8128" class="Set Image URL" type="onevent" val0="first_image" val1="folder/images/faro2005/f14.jpg" urlparams="2"></csaction>
<csaction name="bfc75fd2129" class="Set Image URL" type="onevent" val0="first_image" val1="folder/images/farofinal/f13.jpg" urlparams="2"></csaction>
<csaction name="bfc75fdd130" class="Set Image URL" type="onevent" val0="first_image" val1="folder/images/farofinal/f11.jpg" urlparams="2"></csaction>
<csaction name="bfc75fe8131" class="Set Image URL" type="onevent" val0="first_image" val1="folder/images/farofinal/f9.jpg" urlparams="2"></csaction>
<csaction name="bfc75ff2132" class="Set Image URL" type="onevent" val0="first_image" val1="folder/images/farofinal/f7.jpg" urlparams="2"></csaction>
<csaction name="bfc75ffd133" class="Set Image URL" type="onevent" val0="first_image" val1="folder/images/farofinal/f6.jpg" urlparams="2"></csaction>
<csaction name="bfc76008134" class="Set Image URL" type="onevent" val0="first_image" val1="folder/images/farofinal/f5.jpg" urlparams="2"></csaction>
<csaction name="bfc76014135" class="Set Image URL" type="onevent" val0="first_image" val1="folder/images/farofinal/f4.jpg" urlparams="2"></csaction>
<csaction name="bfc7601e136" class="Set Image URL" type="onevent" val0="first_image" val1="folder/images/farofinal/f3.jpg" urlparams="2"></csaction>
<csaction name="bfc76027137" class="Set Image URL" type="onevent" val0="first_image" val1="folder/images/farofinal/f2.jpg" urlparams="2"></csaction>
<csaction name="bfc76031138" class="Set Image URL" type="onevent" val0="first_image" val1="folder/images/faro2005/faro1.jpg" urlparams="2"></csaction>
</csactions>
</head>
<body onload="preloadImages();" bgcolor="#471e12" link="#666666" vlink="#666666" alink="#99CCCC">
<table width="100%" border="0" align="center">
<tr>
<td align="center" valign="middle" bgcolor="330000" width="800">
<!-- TemplateBeginEditable name="horses" --><!-- TemplateEndEditable --><!-- TemplateBeginEditable name="pets" --><!-- TemplateEndEditable --><!-- TemplateBeginEditable name="pets" --><!-- TemplateEndEditable --><!-- TemplateBeginEditable name="doc" --><!-- TemplateEndEditable --><!-- TemplateBeginEditable name="editorial" --><!-- TemplateEndEditable --><!-- TemplateBeginEditable name="etc" --><!-- TemplateEndEditable -->
<table width="778" border="0" cellspacing="0" cellpadding="0" cool="cool" gridx="16" gridy="16" height="953" showgridx="showgridx" showgridy="showgridy" usegridx="usegridx" usegridy="usegridy">
<tr height="304">
<td width="19" height="304"></td>
<td width="758" height="304" colspan="14" valign="top" align="left" xpos="19"></td>
<td width="1" height="304"><spacer type="block" width="1" height="304"></td>
</tr>
<tr height="448">
<td width="108" height="448" colspan="4"></td>
<td width="669" height="448" colspan="11" valign="top" align="left" xpos="108"></td>
<td width="1" height="448"><spacer type="block" width="1" height="448"></td>
</tr>
<tr height="116">
<td width="25" height="116" colspan="3"></td>
<td width="122" height="116" colspan="2" valign="top" align="left" xpos="25"></td>
<td width="1" height="116"></td>
<td width="122" height="116" valign="top" align="left" xpos="148"></td>
<td width="1" height="116"></td>
<td width="122" height="116" valign="top" align="left" xpos="271"></td>
<td width="123" height="116" colspan="2" valign="top" align="left" xpos="393"></td>
<td width="123" height="116" colspan="2" valign="top" align="left" xpos="516"></td>
<td width="138" height="116" colspan="2" valign="top" align="left" xpos="639"></td>
<td width="1" height="116"><spacer type="block" width="1" height="116"></td>
</tr>
<tr height="84">
<td width="23" height="84" colspan="2"></td>
<td width="124" height="84" colspan="3" valign="top" align="left" xpos="23"></td>
<td width="123" height="84" colspan="2" valign="top" align="left" xpos="147"></td>
<td width="123" height="84" colspan="2" valign="top" align="left" xpos="270"></td>
<td width="1" height="84"></td>
<td width="122" height="84" valign="top" align="left" xpos="394"></td>
<td width="1" height="84"></td>
<td width="122" height="84" valign="top" align="left" xpos="517"></td>
<td width="2" height="84"></td>
<td width="136" height="84" valign="top" align="left" xpos="641"></td>
<td width="1" height="84"><spacer type="block" width="1" height="84"></td>
</tr>
<tr height="1" cntrlrow="cntrlrow">
<td width="19" height="1"><spacer type="block" width="19" height="1"></td>
<td width="4" height="1"><spacer type="block" width="4" height="1"></td>
<td width="2" height="1"><spacer type="block" width="2" height="1"></td>
<td width="83" height="1"><spacer type="block" width="83" height="1"></td>
<td width="39" height="1"><spacer type="block" width="39" height="1"></td>
<td width="1" height="1"><spacer type="block" width="1" height="1"></td>
<td width="122" height="1"><spacer type="block" width="122" height="1"></td>
<td width="1" height="1"><spacer type="block" width="1" height="1"></td>
<td width="122" height="1"><spacer type="block" width="122" height="1"></td>
<td width="1" height="1"><spacer type="block" width="1" height="1"></td>
<td width="122" height="1"><spacer type="block" width="122" height="1"></td>
<td width="1" height="1"><spacer type="block" width="1" height="1"></td>
<td width="122" height="1"><spacer type="block" width="122" height="1"></td>
<td width="2" height="1"><spacer type="block" width="2" height="1"></td>
<td width="136" height="1"><spacer type="block" width="136" height="1"></td>
<td width="1" height="1"></td>
</tr>
</table>
<!-- TemplateBeginEditable name="bio" --><!-- TemplateEndEditable --><!-- TemplateBeginEditable name="packages" --><!-- TemplateEndEditable --><!-- TemplateBeginEditable name="email" --><!-- TemplateEndEditable -->
</table>
<map name="bio_textBbfc725fb"></map>
</body>
</html>
<!-- text below generated by server. PLEASE REMOVE --><!-- Counter/Statistics data collection code --><script language="JavaScript" src="http://hostingprod.com/js_source/geov2.js"></script><script language="javascript">geovisit();</script><noscript></noscript>Someone else told me to put backticks around the session variable and it solved the problem, so
$q = "SELECT * FROM `{$_SESSION['find']}` WHERE id = $id";
Maybe you are looking for
-
Itunes will not recognize Ipod Touch
Ok, so I tried to install Itunes 8 when it first released the other day. I received the BSOD, I ended up reverting back to the last known working configuration for windows. So back to Itunes 7.7.1 or whatever. Plugged my Touch in, and it would not re
-
Can't Mount External HD, Greyed out in DU, Verifies fine
I have a third-party hard drive enclosure I've been using for years with an IDE drive. I have two identical external HD cases and it does the same thing in both. So I know it's not the case. All of a sudden, I can't get the drive to mount. 1. It show
-
Problems with import and import recent
When I click import or import recent, Premiere says it is importing, but it doesn't. The file type is MOV and it is usually something I just captured into Premiere. If I find the file and drag it to the timeline, it works fine. Also, how can I make
-
Does the ApplTV2 support SNMP?
I have cacti running on my Mac Mini, and I've recently purchased an Apple TV. Is there a way to enable SNMP polling on the Apple TV? I'd love to see CPU/Memory/Interface statistics as I'm watching movies on it! Thanks.
-
Is KDE Framework compatible with Windows?
As the topic says, is it possible to use KDE widgets in Qt to create applications, and run them on Windows? Do the libraries need to be compiled in DLL form first? There are lots of cool widgets for KDE and it'd be totally awesome if I can create Cro