Image Hosting Problem
Beware! When attempting to upload some images to post a report concerning a BIOS flash, this is what I got at Photobucket's Website;
There is a problem with this website’s security certificate.
The security certificate presented by this website was not issued by a trusted certificate authority.
Security certificate problems may indicate an attempt to fool you or intercept any data you send to the server.
We recommend that you close this webpage and do not continue to this website.
Recommended to close this webpage.
Not recommended to continue to this website (not recommended).
Quote from: Sea Dog on 25-September-14, 10:01:39
Beware! When attempting to upload some images to post a report concerning a BIOS flash, this is what I got at Photobucket's Website;
There is a problem with this website’s security certificate.
The security certificate presented by this website was not issued by a trusted certificate authority.
Security certificate problems may indicate an attempt to fool you or intercept any data you send to the server.
We recommend that you close this webpage and do not continue to this website.
Recommended to close this webpage.
Not recommended to continue to this website (not recommended).
Thanks! I'll pass this on to the admins and see what they say.
Similar Messages
-
Problem: codebase, jar and image reloading problem please help!
Hi Java Gurus,
I have written an applet that extends JApplet for viewing webcam. In order to reduce the download time I put my classes into a doorcam.jar file. The following is my <applet> tag in my html file.
<applet code="CameraApplet.class"
archive="doorcam.jar"
codebase = "webcam/classes"
width="375" height="475">
<param name="imagePath" value="http://judge/webcam/images">
<param name="webCamImage" value="door.jpg">
<param name="COMPort" value="COM2">
<param name="frameRate" value="10"> <!-- could not exceed more than 10-->
<param name="host" value="judge">
</applet>
The fist problem is that my class file does not get loaded from the jar file if i provide the "codebase" attribute as above. Instead the browser load every single class file from the webserver. This has some problem too. Coz the browser sometimes just thorough NullPointerException or ClassNotFoundException. After much of debugging I found out that the problem is the IE browser which seldom fails to load classes or image file from the server. If i referesh the browser the applet and all its classes loaded successfully and runs smoothly. This behaviour never occurs when running with "appletviewer".
I wanted all my classes to be loaded from my jar file. After much of trial and error I found out that if i remove "codebase" attribute the browser loads the classes from my jar file and applet loads very fast. This is where the second problem comes in. The browser does not reload my webcam image file so that the webcam become alive with live images, like before.
If I run on "appletviewer" everything works fine my web cam is displayed properly. But in IE browser the image does not get reloaded when I refresh my image to give live to my webcam display. The refresh method is given below.
private void refresh(final URL url) {
Image webCamImage =getImage(url);
webCamImage.flush(); // flush out the previous image
webCamImage = getImage(url); // get a new image
webCamImageIcon.setImage(webCamImage); webCamImageIcon.paintIcon(webCamLabel, webCamLabel.getGraphics(), 15, 15);
When I add the "codebase" attribute back, the image gets reloaded for every refresh() and everything works fine. But the classes are also loaded from the server. And occasionally also suffers Class loading and image loading problem. As I presented earlier, when I do refreshing in the browser everything gets loaded and the applet function correctly with web cam displaying very well.
The problem is so strange that I could not find any way to solve it.
It would be a great help to me if somebody provide me some work around to the problem.
I tested on Windows 2000, Windows XP, IE 5.5, IE 6 with J2SDK 1.4.0.
Thank you all very much in advance.
best regards,
JudgeThank you so much for the suggestions. I did tried the way u suggested. The problem still the same.
I think its the problem between IE browser and Java Plug-in.
I which SUN would find these incompatibilities and solve these problems.
I even tried using java SDK and plug-in 1.4.1 it even worst. It can't even load an applet. And it does not show any loading messages nor any error messages. It just show a cross sign on the upper left coner.
I would be so glad, if Sun would try to eliminate the inconsistancies such as caching, loading, initializing etc between browser and its Java plug-In. For example, applets behave well in appletviewer and behave unpredictably in browser environment.
I have seen so many people in the forums with all sorts of problems because of this.
Right now I m desperately looking for work around to my problem.
If somebody would provide me with the solution to my problem it would be a great help to me.
thank you all so much.
best regards,
Judge -
i have LR5 on a mac book pro with a WD external hard drive with my with my LR5 images . my problem is my external drive is corrupted .i was told by apple that my macshow the hard drive is there but it is not moumting and have to be reformat. i have to use recovery data to save my images on my external before i can refomat.iam willing to lose my images on my extenal hard drive but i would like to know can i erase my LR5 images and start over or delete LR5 and download it again
Simply start a new catalog:
File >> New Catalog
Choose a new name and save.
When the empty catalog launches you are ready to start over. -
My iMac 27" Late 2012 has Image Persistence Problem
I'm wondering what to do about an annoying image persistence problem on my 27" late 2012 iMac. I got the iMac just a few days ago. Monday actually, so 4 days ago.
It's the 3.4GHz i7, 8GB, NVIDIA 680MX 1TB fusion drive model.
Overall it has become the love of my life, but the image persistence thing is getting harder to ignore. This happens after only a few minutes of use. If I follow Apple's instruction on dealing with LCD image persistence, I can make it go away for a while, but it comes back very quickly.
It is extremely noticeable on a plan dark background. It looks as thought he screen has been left on for a very long time with the same windows open, but it occurrs in less than 5 minutes of use with nothing more intense than a bit of web surfing.
I've read that this is happening a great deal on these new iMacs, particularly teh 27" machines.
While the problem seems to be known to those of us afflicted I don't know if Apple has acknowledged an issue or not.
Here is a sample of the complaints: http://forums.macrumors.com/showthread.php?t=1509571
I can make the ghost image vanish by bringing up an all white scree for a minute or so or using LCD Scrub.
I'm wondering if anyone else has foun a solution other than asking for a replacement computer, which Apple seems to be granting on this issue?Avoiding image persistence on Apple (IPS) displays
Avoiding image persistence on Apple LCD displays
If you cannot resolve the issue yourself, then return the computer for a replacement. You may do this freely within 14 days from date of purchase, so don't delay. -
SSRS indicator image display problem!!
Hello ALL;
I am having problem with displaying indicator image in DEV report manager. but same rdl works in QA environment. Both server has SP1 installed. Any Idea? Appreciate for your help. Thanks,Hi Techchi,
Based on the limited information, I cannot figure it out for this issue. As per my understanding, I think this issue can be caused by the browser that run the report manager. If you use IE explorer to render the report, I suggest that you can try to run
it in compatibility mode. If you are using another browser, I recommend that you should use IE explorer to render the report to check the issue again.
If this issue still exists, in order to solve the problem more efficiently, I need to clarify some information.
Are all reports with indicator image cannot render well in DEV report manager? Or just this one report?
What is the phenomenon about the indicator image display problem? Could you please post a screenshot about this?
It is benefit for us to do further analysis. Thank you for your understanding.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Having a image alignment problem using clearbox
Hi,
I'm having an image alignment problem. I cannot figure it out. I'm using the clearbox - lightbox dreamweaver widget. Using Dreamweaver CS6.
Actual page located here. Any help would be appreciated.
http://dirtysouthink.com/gallery/dustin2.htmlThis has very little to do with Dreamweaver. DW is merely a tool to assist you in building a web site. It is purely a matter of styling (CSS).
When I look at the structure, I see
BODY-CONTENT (width: 490px)
GALLERY (width: 452px)
CONTAINER (width: 500px)
ITEM (width: 150px)
From this I can deduce that:
GALLERY will fit inside BODY-CONTENT
CONTAINER will NOT fit inside GALLERY or BODY-CONTENT
ITEM will fit three times into CONTAINER
To start with, I would reduce the size of the CONTAINER so that it fits inside of its parent. Then I would adjust the width of the ITEM so that only two of them fit inside of the CONTAINER. -
How to solve the image display problem in the iTunes Store
Hi guys!
I just want to give a work-around for all of you having the image display problem in the iTunes Store. In my case only the square images in the slider sections won't load:
I had this in my last W7-installation and got it again in W8 after the first few weeks.
There are a lot of reports about this problem out there and adhoc solutions like 'clear the cache' or 'reinstall and drink ice tea' that do not work. It is obviously a file request error. It is all about finding out which server addresses get blocked by your computer.
Solution: Go to your firewall and your Anti-virus-program. There must be a whitelist option. In Kaspersky, check the web-options, the banner-options and the firewall-options, because the all have whitelists. The following addresses have to be whitelisted:
*.apple
*.mzstatic.apple.com.akadns.net
*.mzstatic.com.edgesuite.net
*.da1.akamai.net
*.itunes.apple.com
se.itunes.apple.com
upp.itunes.apple.com
ax.init.itunes.apple.com
xp.apple.com
*.mzstatic.com
client-api.itunes.apple.com
www.apple.com.edgekey.net
www.isg-apple.com.akadns.net
Press Ctrl + R in the iTunes Shop then and browse throught the music sections. All images should be displayed correctly now.
If not, there might be more Apple servers involved in your case. You can find them by running a DNS sniffing tool like the DNS query sniffer by Nirsoft or Wireshark.Phone restarting randomly could be loose battery. Tighten by putting a small strip of electrical tape on the back edge.
THE BITTERNESS OF POOR QUALITY, LINGERS LONG AFTER THE CHEAPNESS OF PRICE, IS SOON FORGOTTEN. -
Image reading problem in servlet
Image reading problem in servlet
I am reading an image in servlet and writing it to ServletOutputStream
The following code works fine unless I change the size of the byte array (for increasing download speed) from 8 to something like 128 or any other higher value
If I change the value of byte array size the image does not get downloaded properly, I mean the quality of the image changes, it does not looks like the original imageURL url = new URL("http://www.mysite.com/images/img1.jpg");
URLConnection con = url.openConnection();
con.setUseCaches(false);
BufferedInputStream in = new BufferedInputStream(con.getInputStream());
BufferedOutputStream out = new BufferedOutputStream(response.getOutputStream());
byte b[] = new byte[8];
while(in.read(b) != -1)
out.write(b);
out.flush();
out.close();
in.close();what do I change
byte array size
or use the constructor of BufferedInputStream with 2 parameter
or use the constructor of BufferedOutputStream with 2 parameter
or use flush outside while loop or what elseChange your while loop to:
int count;
while((count = in.read(b)) != -1)
out.write(b, 0, count);
out.flush();
}The penultimate time read is called, it may not fill the entire byte array. You only want to write out however much was read into the array.
For better performance, you should move the flush() outside of the loop too. BufferedOutputStream will flush automatically when its internal buffer is full. -
hi, i have an image inside an iframe that i'm trying to
change upon the click of a button. i use the following code:
<SCRIPT language="JavaScript" type="text/javascript">
function swapImage(intImage){
var
imgs=["images/pic0.jpg","images/pic1.jpg","images/pic2.jpg","images/pic3.jpg","images/pic 4.jpg",
"images/pic5.jpg"];
parent.frames['cont'].document.getElementById('mgmnt_pic').src =
imgs[intImage];
alert(parent.frames['cont'].document.getElementById('mgmnt_pic').src)
</SCRIPT>
then in body:
<p><a href="javascript:; "
onclick="frames['cont'].swapImage(0);">Management
Team</a></p>
i know from the alert that it is changing the source of my
image, the problem is that the image itself is not changing at all.
has anyone experienced this before? what can i do to fix it?Hi,
chk the link
http://javascript.internet.com/miscellaneous/random-image.html
shanthi -
Netinstall image installation problem
Hi, I'm new in MacOSX Server and trying to do image file with System Image Utility 10.6.2 - MacOS10.6 and additional packeges (MacOSXUpdCombo10.6.2, iWork'09, iLife'09) with "AddPackages and Post-Install Script". By making a image no problem but when I start the installation occurs the following problem.
MacOs10.6 install correct but other programs added in "AddPackages and Post-Install Script" is not installed, and in Macintosh HD is created a folder named Install.76443 with locked directories.
Where is the problem why the additional packages not installed.
My SIU configuration is :
Define Image Source: MacOSXInstallDVD
Add Packages and Post-Install Scripts
- MacOsx10.6.2. Update Combo
- iLife'09.pkg
- iWork'09.pkg
Create image
type: Netinstall
Install Volume: Macintosh HD
Save to: Documents
Image Name: Netinstall of Mac OS X Install DVD
Network Disk: Netinstall of Mac OS X Install DVD
Image Index: 1533
Description: Netinstall of Mac OS X Install DVD
i want to create one image for all packages and updates and install it from network to all computers in my office.
thanksI think this is covered in a different thread but, in short, the 10.6.2 update will fail to install on top of the 10.6 DVD. YMMV with the iLife & iWork packages as they may run pre-install scripts that will also cause them to fail.
-
I created an image map back in RoboHelp 6 and it worked perfectly. When I converted my project recently to RoboHelp 8, the image map pop-ups are not working correctly. I've checked the properties of the image map and they are correct. But the pop-up boxes do not display correctly. I'm going to attached an example of how the same one displays in RH6 and RH8 and a screen shot of my settings.
Can anyone help me with this?After much trial and error testing around this image map issue, I cannot seem to find a fix for image maps within RoboHelp 8. No matter what I've tried (and it was a lot), nothing seems to fix the image map problem. Even creating a new image map on a new page with totally different info, pop up pages, image, etc. and turning OFF all breadcrumbs - the image map does not display correctly once generated (nor in preview).
I have found a VERY TEDIOUS workaround for this (that I'm not happy about). If I take my original pop-up topic htm pages (9 of them) from my RoboHelp 6 project and the original eHlpDhtm.js file from RH6 and place them in my output Help file from RH8 (overwriting the RH8 with the RH6 files), then the image map works correctly.
The eHlpDhtm.js file has many more scripts in it than just the image map triggers, so I'm not sure what all else I'm affecting when I'm fixing one problem (i.e. not sure how many more problems I'm creating at the same time when fixing one problem.)
It's almost like the "breadcrumbs" feature in RH8 has broken the image maps feature in RH8.
I'm still up for more suggestions as how to fix this if anyone has any ideas. -
How can I save the images and movies on a external Disk from iphoto program, to protect the images when problems occur in the laptop,
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store
If you want to back up the Photos only:
Export them using the File -> Export command.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue. -
Pre 2010 Macs not seeing netboot images hosted on 10.6.7 server
I'm having an interesting issue where any pre-2010 Mac will not see available images hosted on OS 10.6.7 Server. Anything later than mid-2010 has no issues and sees all of the available boot images when option booting. Does anyone have any insight as to why this might be happening. I'm still searching but not having any luck.
Just a shot in the dark but is it possible you have enabled some kind of filtering under Netboot/Settings/Filters? My box to enable is unchecked.
Thanks -
Image loading problem in OS X browsers
This is a really perplexing.
When I'm surfing around, Safari refuses to load some images on pages. It happens randomly but most reliably on MySpace.
Here's what I typically see on a user's MySpace page...
http://img198.imageshack.us/my.php?image=ss0zv.png
Safari states in its activity window for the two blue question marks that it "can't connect to host".
If I cut and paste the URLs in question to Mozilla or Firefox, I get the same "cannot connect to host" messages.
However, if I were to open the same profile on my Windows PC, all browsers, here at work it shows just up fine.
In fact here's a link of one of those pics which doesn't show for me using any browser on my Mac.
http://myspace-421.vo.llnwd.net/00677/12/41/677381421_m.jpg
Safari's full bomb on the naked URL is:
"Safari can't open the page http://myspace-421.vo.llnwd.net/00677/12/41/677381421_m.jpg because it could not connect to the server myspace-421.vo.llnwd.net"
Thanks in advance for your help.You are welcome.
BTW, is it just MySpace you are having problems with? If so, the way their pages are coded may be the cause of problems with non-Windows browsers.
In Safari, you can always go to Safari > Report Bugs to Apple when you are on a misbehaving page to report the problem. Clicking on "More Options" will allow you to attach page source code and/or a screenshot (you will not get an acknowledgment, but they do look at all bug reports). -
Image loading problem in all OS X browsers
This is a really perplexing.
When I'm surfing around, Safari refuses to load some images on pages. It happens randomly but most reliably on MySpace.
Here's what I typically see on a user's MySpace page...
http://img198.imageshack.us/my.php?image=ss0zv.png
Safari states in its activity window for the two blue question marks that it "can't connect to host".
If I cut and paste the URLs in question to Mozilla, Firefox or IE, I get the same "cannot connect to host" messages.
However, if I were to open the same profile on my Windows PC, all browsers, here at work it shows just up fine.
In fact here's a link of one of those pics which doesn't show for me using any browser on my Mac.
http://myspace-421.vo.llnwd.net/00677/12/41/677381421_m.jpg
Safari's full bomb on the naked URL is:
"Safari can't open the page http://myspace-421.vo.llnwd.net/00677/12/41/677381421_m.jpg because it could not connect to the server myspace-421.vo.llnwd.net"
It has to be an OS issue if it's a problem across all browsers right?
I'm really stumped at this one and would be appreciative if anyone has any ideas.
Thanks in advance for your help.
PowerBook G4 Mac OS X (10.4.6)You are welcome.
BTW, is it just MySpace you are having problems with? If so, the way their pages are coded may be the cause of problems with non-Windows browsers.
In Safari, you can always go to Safari > Report Bugs to Apple when you are on a misbehaving page to report the problem. Clicking on "More Options" will allow you to attach page source code and/or a screenshot (you will not get an acknowledgment, but they do look at all bug reports).
Maybe you are looking for
-
Hi, I unlocked my phone about an hour ago using a legitimate unlock code from unlocks.co.uk. I entered the code and it seemed to work fine and now my network shows up as Vodafone uk (I have unlocked it from T-Mobile) It looks as though it is unlocked
-
In Substitution rule view only one task "All" is coming
Hi! All, I am facing very strange problem in UWL. Recently we upgraded our SAP Portal from SP10 TO SP15 but in Manage Substitution Rule view under Assign these task drop down we are getting only one task i.e 'All'. Remaining 3 tasks are gone. Can you
-
With the new webpage set up are they a way to tell the difference between a text and a pic under view my usage?
-
Filter Function Not Working Properly on iOS App
Spotify Community, The latest version of the desktop app features a filter (Crtl + f) function that allows a user to filter certain tracks from the playlist and "bring them to the forefront." For example, if I filter my largest playlist (which is 3,
-
Why gradients only linear and radial?
I'm in CS3 and have a very simple need. I want to make a photograph fade out on all four sides using a gradient transparency mask. The gradient tool, however, only has linear and radial. Very, very limiting. I also want to make an oval transparency m