Image Loading Problem with Sharp S770H

Hello Friends,
I am developing game for SharpS770H device, its working fine but incase i try to increase resources(Images) its getting hang.
I have created All images in a Single function, i think before all images creation game is trying to use image object. The same Game is working fine on anather device.
Could u plz suggest some solution as soon as possible.

Similar Messages

Image loading problem with weblogic security page

I developed an j2ee application on tomcat server. After successful working in tomcat I migrated to weblogic server.
So problem is the application is working properly with out security in weblogic. Later security is added to the application, then the back ground images are not loading in .jsp pages. Please suggest me what i have to follow to display back ground images in the .jsp pages. I was unable to find solution.
Thanks
Ananda

Hi,
There is a BADI (TRIP_IMP_EXP) that can help you to restrict trip amount by set delimit date.
Use RESTRICT_TRAVEL_RANGE method ot do this.
BR, Jurijs

Texture:illegal image size problem with loading texture

i have used the method of loading an texture into a scene as shown in chapter 7 of java 3d tutorials. My image size is of the power 2. But why am i still getting the illegal image size error, pleeeeaaaase help, i will be greatful for any suggestions thank you. i have pasted the source code for the method of loading a texture below
Thank you
BranchGroup scene= new BranchGroup();
QuadArray plane = new QuadArray(4,GeometryArray.COORDINATES|GeometryArray.TEXTURE_COORDINATE_2);
Point3f p = new Point3f();
p.set(-1.0f,1.0f,0.0f);
plane.setCoordinate(0,p);
p.set(-1.0f,-1.0f,0.0f);
plane.setCoordinate(1,p);
p.set(1.0f,-1.0f,0.0f);
plane.setCoordinate(2,p);
p.set(1.0f,1.0f,0.0f);
plane.setCoordinate(3,p);
TexCoord2f q = new TexCoord2f();
q.set(0.0f,1.0f);
plane.setTextureCoordinate(0,0,q);
q.set(0.0f,0.0f);
plane.setTextureCoordinate(0,1,q);
q.set(1.0f,0.0f);
plane.setTextureCoordinate(0,2,q);
q.set(1.0f,1.0f);
plane.setTextureCoordinate(0,3,q);
TextureLoader loader = new TextureLoader("C:\\Documents and Settings\\Ozcan\\Desktop\\Java 3d\\examples\\texture\\brick.GIF",this);
ImageComponent2D image = loader.getImage();
Texture2D texture = new Texture2D();
texture.setImage(0,image);
Appearance appearance = new Appearance();
appearance.setTexture(texture);
Shape3D shape = new Shape3D(plane,appearance);
scene.addChild(shape);
return scene;

GridBagLayout will make arrangements to display the JPanel at the size its layout manager says that it needs. To help the JPanels layout manager we can let it know that we need extra space to show the rendered image.
class tt extends JPanel{
    Image pic1;
    tt(){
    public void paintComponent(Graphics comp){
    public Dimension getPreferredSize() {
        return new Dimension(pic1.getWidth(this), pic1.getHeight(this));
}

Bizarre image load problem in InDesign CS2

Hi, I am having a problem with bringing in some images into InDesign CS2. I have a document file that has many images in place, and I just received some new images that are screenshots from video. They are saved as rgb jpgs. They are 2700x1963 pixels and 300dpi (so someone obviously did some conversion from screen res.)
When I try to bring them into an image box in InDesign, I do command D, then select the image. It acts like its loading it but then nothing is in the box. I thought perhaps the image was just hidden outside of the edge of the box but when I go to "fitting" under the "OBJECT" menu, all the options are greyed out as if there is no image there. It also shows no image linked in the links panel.
I tried opening in photoshop and resaving, and also tried resaving as another name. I tried changing it to cmyk and adjusting the levels and resaving as tif. I tried making a new photoshop file and copy-and=pasting the image into it and saving. Still, no image will load in the image box.
I feel like the images must have corrupted since they were sent to me as email attachments, but its so odd that they open in photoshop just fine. Any ideas?

nevermind, people.
my computer was having memory overload. on a whim I restarted the computer.
BAM...no issue.
You know what they always say, "When all else fails, restart your computer!"

Weird image distortion // Problem with game

Hello,
Im making a tiled based multiplayer game and everything is going fine however Im having a problem with image displaying.
Here is how it looks like when I play it on my server computer as well as on my laptop:
[http://s278.photobucket.com/albums/kk112/beloxx/?action=view&current=ss.jpg]
And here is how it looks when I play it on my brother's computer:
[http://s278.photobucket.com/albums/kk112/beloxx/?action=view&current=ss2.jpg]
The image on the latter computer is distorted.
I used to test my game on that computer before and everything was fine. I tried rebooting it but its still not displaying right. Right after I run the game the image is fine for a split second and then it becomes distorted...
Did anyone have a similar problem?
Here is the link to my home computer server:
[http://belox.gotdns.com]
or just go to:
[http://74.56.212.14]
The server may be slow or down so dont get frustrated if it take slong to load.
Could you tell me whats your images look like when u run the game?
Id really appreciate it if you helped me.

Ok, the server is up and running right now so could you guys go to [ http://belox.gotdns.com| http://belox.gotdns.com] and see if your background image is distorted like in the screen shot above?
Thanks

Image loading problem in OS X browsers

This is a really perplexing.
When I'm surfing around, Safari refuses to load some images on pages. It happens randomly but most reliably on MySpace.
Here's what I typically see on a user's MySpace page...
http://img198.imageshack.us/my.php?image=ss0zv.png
Safari states in its activity window for the two blue question marks that it "can't connect to host".
If I cut and paste the URLs in question to Mozilla or Firefox, I get the same "cannot connect to host" messages.
However, if I were to open the same profile on my Windows PC, all browsers, here at work it shows just up fine.
In fact here's a link of one of those pics which doesn't show for me using any browser on my Mac.
http://myspace-421.vo.llnwd.net/00677/12/41/677381421_m.jpg
Safari's full bomb on the naked URL is:
"Safari can't open the page http://myspace-421.vo.llnwd.net/00677/12/41/677381421_m.jpg because it could not connect to the server myspace-421.vo.llnwd.net"
Thanks in advance for your help.

You are welcome.
BTW, is it just MySpace you are having problems with? If so, the way their pages are coded may be the cause of problems with non-Windows browsers.
In Safari, you can always go to Safari > Report Bugs to Apple when you are on a misbehaving page to report the problem. Clicking on "More Options" will allow you to attach page source code and/or a screenshot (you will not get an acknowledgment, but they do look at all bug reports).

Image loading problem in all OS X browsers

This is a really perplexing.
When I'm surfing around, Safari refuses to load some images on pages. It happens randomly but most reliably on MySpace.
Here's what I typically see on a user's MySpace page...
http://img198.imageshack.us/my.php?image=ss0zv.png
Safari states in its activity window for the two blue question marks that it "can't connect to host".
If I cut and paste the URLs in question to Mozilla, Firefox or IE, I get the same "cannot connect to host" messages.
However, if I were to open the same profile on my Windows PC, all browsers, here at work it shows just up fine.
In fact here's a link of one of those pics which doesn't show for me using any browser on my Mac.
http://myspace-421.vo.llnwd.net/00677/12/41/677381421_m.jpg
Safari's full bomb on the naked URL is:
"Safari can't open the page http://myspace-421.vo.llnwd.net/00677/12/41/677381421_m.jpg because it could not connect to the server myspace-421.vo.llnwd.net"
It has to be an OS issue if it's a problem across all browsers right?
I'm really stumped at this one and would be appreciative if anyone has any ideas.
Thanks in advance for your help.
PowerBook G4 Mac OS X (10.4.6)

You are welcome.
BTW, is it just MySpace you are having problems with? If so, the way their pages are coded may be the cause of problems with non-Windows browsers.
In Safari, you can always go to Safari > Report Bugs to Apple when you are on a misbehaving page to report the problem. Clicking on "More Options" will allow you to attach page source code and/or a screenshot (you will not get an acknowledgment, but they do look at all bug reports).

Image loading problem

I've been having a problem with my app that is designed to take an image, scale it into 3 different sizes and then save it.
The problem seems to be that the image doesn't load correctly as when I look at the width and height of it, they come back as -1. I've tried both:
try
            image = ImageIO.read(new File(url));
        catch(IOException e)
            e.printStackTrace();
            throw new RuntimeException("Error loading file: " + url);
        }and
image = Toolkit.getDefaultToolkit().getImage(url);my code at present looks like this:
package resizeImage;
import com.sun.image.codec.jpeg.*;
import javax.imageio.*;
import java.awt.image.*;
import java.awt.*;
import java.io.*;
import javax.swing.ImageIcon;
public class resizeImage
    public BufferedImage convert(Image im)
        BufferedImage bi = new BufferedImage(im.getWidth(null),im.getHeight(null),BufferedImage.TYPE_INT_RGB);
        Graphics bg = bi.getGraphics();
        bg.drawImage(im, 0, 0, null);
        bg.dispose();
        return bi;
    public String resize(String url, String id)
        // Try and load image -------------------------------------------------
        this.url = "hobbes.jpg";
        this.id = "1";
        try
            image = ImageIO.read(new File(url));
        catch(IOException e)
            e.printStackTrace();
            throw new RuntimeException("Error loading file: " + url);
        //image = Toolkit.getDefaultToolkit().getImage(url);
        //BufferedImage temp = convert(image);
        int temp1 = image.getWidth(null);
        int temp2 = image.getHeight(null);
        return ("Width = "+temp1+"\tHeight = "+temp2);
...

Your code loaded an image okay. It could be that the image you are trying to load has
corrupted data. Using the 'getResource' method simplifies the process of making up urls.
The Swing tutorial page "How to Use ImageIcons" has a discussion on its use. If you use
the Toolkit 'getImage' methods be sure to use a MediaTracker to load the image since these
methods return immediately. The MediaTracker api has demo code.
import com.sun.image.codec.jpeg.*;
import javax.imageio.*;
import java.awt.image.*;
import java.awt.*;
import java.io.*;
import java.net.*;
import javax.swing.ImageIcon;
public class ImageLoading
    public BufferedImage convert(Image im)
        BufferedImage bi = new BufferedImage(im.getWidth(null),
                                             im.getHeight(null),
                                             BufferedImage.TYPE_INT_RGB);
        Graphics bg = bi.getGraphics();
        bg.drawImage(im, 0, 0, null);
        bg.dispose();
        return bi;
    public String resize(String path, String id)
        BufferedImage image = null;
        try
            URL url = getClass().getResource(path);
            image = ImageIO.read(url);
        catch(MalformedURLException mue)
            System.err.println("mue for : " + path + " = " + mue.getMessage());
        catch(IOException e)
            e.printStackTrace();
            throw new RuntimeException("Error loading file: " + path);
        int imageWidth = image.getWidth(null);
        int imageHeight = image.getHeight(null);
        BufferedImage bi = convert(image);
        int biWidth = bi.getWidth();
        int biHeight = bi.getHeight();
        return ("imageWidth = " + imageWidth + "\timageHeight = " + imageHeight + "\n" +
                "biWidth    = " + biWidth +    "\tbiHeight    = " + biHeight);
    public static void main(String[] args)
        ImageLoading test = new ImageLoading();
        String s = test.resize("images/cougar.jpg", "1");
        System.out.println(s);
}

Image printing problem with Photoshop and Lightroom specifically with 11X14 cuts off top of image and moves bottom border up. Windows 7 OS - Epson Printer is working properly.

Have an unprecedented problem with printing 11X14 photos in both PS and Lightroom. The printer is operataing properly. Printing 81/2X11 correctly. Have double and triple checked all the printing settings and they are correct. Have checked with friends to no avail. This problem started yesterday. Widows 7 OS. Need help.

You show the OS receiving an image from Photoshop, and the OS starting the Epson print driver and handing it part of the image, the driver connects to the printer, then the print driver fails. It looks like a bug in the Epson rasterizer, or the printer communication.
You really need to talk to Epson. Photoshop isn't involved in that error.

SQL Loader Problem with Date Format

Dear all,
I am dealing with a problem in loading data with SQL Loader. The problem is in the date format.
More specifically, I created the following Control File:
file.ctl
LOAD DATA
INFILE 'D:\gbal\chatium.log'
APPEND INTO TABLE CHAT_SL
FIELDS TERMINATED BY WHITESPACE
TRAILING NULLCOLS
(SL1 DATE "Mon DD, YYYY HH:MI:SS FF3AM",
SL2 char,
SL3 DATE "Mon DD, YYYY HH:MI:SS FF3AM",
SL4 char,
SL5 char,
SL6 char,
SL7 char,
SL8 char,
SL9 char,
SL10 char,
SL11 char,
SL12 char,
SL13 char,
SL14 char,
SL15 char)
The data we want to load are in the following file:
Apr 29, 2007 12:05:49 AM 1060615 Apr 29, 2007 12:05:35 AM 306978537730 24026384 chatium.user.userinfo WAP 0
Apr 29, 2007 12:12:51 AM 1061251 Apr 29, 2007 12:12:27 AM 306978537730 24026384 chatium.channel.list WAP 0
Apr 29, 2007 12:12:51 AM 1061264 Apr 29, 2007 12:12:32 AM 306978537730 24026384 chatium.channel.listdetail WAP 0
Apr 29, 2007 12:13:51 AM 1061321 Apr 29, 2007 12:13:31 AM 306978537730 24026384 chatium.user.search WAP 0
Apr 29, 2007 12:13:51 AM 1061330 Apr 29, 2007 12:13:37 AM 306978537730 24026384 chatium.user.userinfo WAP 0
The error log file is the following:
SQL*Loader: Release 9.2.0.1.0 - Production on Mon Apr 30 11:29:16 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Control File: file.ctl
Data File: D:\gbal\chatium.log
Bad File: chatium.bad
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 64 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Table CHAT_SL, loaded from every logical record.
Insert option in effect for this table: APPEND
TRAILING NULLCOLS option in effect
Column Name Position Len Term Encl Datatype
SL1 FIRST * WHT DATE MonDD,YYYYHH:MI:SS
SL2 NEXT * WHT CHARACTER
SL3 NEXT * WHT CHARACTER
SL4 NEXT * WHT CHARACTER
SL5 NEXT * WHT CHARACTER
SL6 NEXT * WHT CHARACTER
SL7 NEXT * WHT CHARACTER
SL8 NEXT * WHT CHARACTER
SL9 NEXT * WHT CHARACTER
SL10 NEXT * WHT CHARACTER
SL11 NEXT * WHT CHARACTER
SL12 NEXT * WHT CHARACTER
SL13 NEXT * WHT CHARACTER
SL14 NEXT * WHT CHARACTER
SL15 NEXT * WHT CHARACTER
Record 1: Rejected - Error on table CHAT_SL, column SL1.
ORA-01840: input value not long enough for date format
Record 2: Rejected - Error on table CHAT_SL, column SL1.
ORA-01840: input value not long enough for date format
Record 3: Rejected - Error on table CHAT_SL, column SL1.
ORA-01840: input value not long enough for date format
Record 4: Rejected - Error on table CHAT_SL, column SL1.
ORA-01840: input value not long enough for date format
I wonder if you could help me.
Thank you very much in advance.
Giorgos Baliotis

SQL> select to_date('Apr 29, 2007 12:05:49 AM','Mon DD, YYYY HH:MI:SS FF3AM') from dual;
select to_date('Apr 29, 2007 12:05:49 AM','Mon DD, YYYY HH:MI:SS FF3AM') from dual
ERROR at line 1:
ORA-01821: date format not recognized
SQL> ed
Wrote file afiedt.buf
1* select to_date('Apr 29, 2007 12:05:49 AM','Mon DD, YYYY HH:MI:SS AM') from dual
SQL> /
TO_DATE(
29/04/07
SQL> Then, you defined blank space as separator, but there is spaces in your date inside your file. So, you should add double-quotes around the date field like below, and add optionally enclosed by '"' into your ctlfile.
"Apr 29, 2007 12:05:49 AM" 1060615 "Apr 29, 2007 12:05:35 AM" 306978537730 24026384 chatium.user.userinfo WAP 0
"Apr 29, 2007 12:12:51 AM" 1061251 "Apr 29, 2007 12:12:27 AM" 306978537730 24026384 chatium.channel.list WAP 0
"Apr 29, 2007 12:12:51 AM" 1061264 "Apr 29, 2007 12:12:32 AM" 306978537730 24026384 chatium.channel.listdetail WAP 0
"Apr 29, 2007 12:13:51 AM" 1061321 "Apr 29, 2007 12:13:31 AM" 306978537730 24026384 chatium.user.search WAP 0
"Apr 29, 2007 12:13:51 AM" 1061330 "Apr 29, 2007 12:13:37 AM" 306978537730 24026384 chatium.user.userinfo WAP 0Example :
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14215/ldr_concepts.htm#sthref477
Nicolas.

Crystal 11 - Latest Service Pack loaded - problem with Kyocera printer

Post Author: sorrock
CA Forum: Integrated Solutions
Hi
We are using Crystal 11 Report Writer, and Sage ACCPAC. Since Upgrading our ACCPAC all the crystal reports that ACCPAC utilises are coming up as garbage on the preview screen. I have ruled out a sage issue by opening crystal directly and opening the respective report, the garbage still appears, if I change the printer that it is set to then the report appears fine.
The printer is a Kyocera - fs-c8026n the driver is a Kyocera Mita extended Driver.
Any other printer is fine - so I am looking for anyone who has had problems with a Kyocera printing garbage.
I have loaded the latest service pack for Crystal.
Can anyone please help - apologies if I have put this on the incorrect forum
Thanks
Stacey

Hi Jim,
You can upgrade to CR XI R2 for free by downlaoding the trial version, install using your XI keycode and then getting a keycode for XI R2 to enable all features.
Or to upgrade XI only then install the latest service pack will bring you up to date.
Thank you
Don

Iwl3945 module loading problem (with workaround)

I've been experiencing problems with my intel wireless card (iwl3945) not loading at boot time. The problem arose after a fresh install from a Chakra (kdemod) live CD after I got a new harddrive for my notebook. It worked fine from the live CD and immediately post-install but when I upgraded the system with "pacman -Syu" (the kernel was upgraded as part of this) the card no longer loaded during boot (i.e. wlan0 would not show up under "ifconfig -a").
I checked some threads on the iwl3945 (e.g. http://bbs.archlinux.org/viewtopic.php? … 18#p638618 and http://bbs.archlinux.org/viewtopic.php?id=73876) but couldn't find quite the same behaviour so decided to start a new thread.
It's also similar to this thread (http://bbs.archlinux.org/viewtopic.php?id=82357), but this is not for the iwl3945.
The following is a log of the problem:
$ ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:15:C5:46:C6:6A
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:17
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:24 errors:0 dropped:0 overruns:0 frame:0
TX packets:24 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1240 (1.2 Kb) TX bytes:1240 (1.2 Kb)
$ ifconfig wlan0 up
wlan0: unknown interface: No such device
$ lsmod | grep iwl
iwl3945 89020 0
iwlcore 107100 1 iwl3945
mac80211 155532 2 iwl3945,iwlcore
led_class 4000 3 sdhci,iwl3945,iwlcore
cfg80211 90428 3 iwl3945,iwlcore,mac80211
$ dmesg | grep iwl
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
iwl3945: Copyright(c) 2003-2009 Intel Corporation
iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwl3945 0000:0c:00.0: setting latency timer to 64
iwl3945 0000:0c:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:0c:00.0: irq 28 for MSI/MSI-X
iwl3945 0000:0c:00.0: Failed to register hw (error -2)
iwl3945 0000:0c:00.0: PCI INT A disabled
iwl3945: probe of 0000:0c:00.0 failed with error -2
Here is my rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_GB.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Dublin"
KEYMAP="uk"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(b44 mii !ipw3945 iwlcore pcspkr snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-codec snd-hda-intel soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="alex-xps"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
eth0="dhcp"
# Wireless: See network profiles below
wlan0="dhcp"
#Static IP example
#eth0="eth0 134.226.144.162 netmask 255.255.0.0 broadcast 134.226.255.255"
INTERFACES=(!eth0 !eth1 !wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng hal !network wicd !networkmanager avahi-daemon avahi-dnsconfd alsa cdemud kdm)
I read somewhere that there was an issue with kill switches and that rfkill may help so I installed it from AUR. However, there didn't seem to be any block:
$ rfkill list
1: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
2: dell-wifi: Wireless LAN
Soft blocked: no
Hard blocked: no
3: dell-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
I also tried creating a modprobe.conf file as suggested in some quarters (/etc/modprobe.d/iwl3945.conf):
alias wlan0 iwl3945
options iwl3945 disable_hw_scan=1
Sadly still no luck on a reboot.
After much pulling of hair the following workaround finally did it for me. Basically even though the module doesn't load during boot I can remove it and then modprobe it manually and it then works so that I can bring up the interface:
# rmmod iwl3945
# modprobe iw3945
# ifconfig wlan0 up
# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:15:C5:46:C6:6A
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:17
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:24 errors:0 dropped:0 overruns:0 frame:0
TX packets:24 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1240 (1.2 Kb) TX bytes:1240 (1.2 Kb)
wlan0 Link encap:Ethernet HWaddr 00:18:DE:1E:7B:46
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
wmaster0 Link encap:UNSPEC HWaddr 00-18-DE-1E-7B-46-00-00-00-00-00-00-00-00-00-00
UP RUNNING MTU:0 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
I can then use wicd to connect to my router at home (networkmanager doesn't seem to work for me with the same settings).
Hopefully this may be of some use to someone with the same issue and to any kernel gurus that may be scanning this section of the forum.

I tinkered with the rfkill module as suggested.
First checked what the default behaviour was
$ lsmod | grep rfkill
rfkill 19728 3 bluetooth,dell_laptop,cfg80211
Then blacklisted rfkill in rc.conf using "!rfkill" in the modules line
$ lsmod | grep rfkill
rfkill 19728 1 cfg80211
Unfortunately I still had to manually remove and reload iwl3945 as before.
I tried inserting the options in modprobe.conf suggested by you in your other post
# /etc/modprobe.d/modprobe.conf (for v2.6 kernels)
options bluetooth rfkill=0
options dell_laptop rfkill=0
After a reboot still no wireless activity and checking rfkill module gives same as for blacklisting in rc.conf, i.e. ...
$ lsmod | grep rfkill
rfkill 19728 1 cfg80211
So still manually un/reloading as before. At least the workaround is not too labour intensive.

Image Capture problems with my MacBook

When i plug in my camera macbook three different icons show up with it in finder and two different icons show up with it in image capture. my problem is that none of my pictures will show in my image capture. ive never had a problem with this before. please help

when i plug my camer into my macbook*

Image size problem with Retina Macbook Pro

I exported raw images to Jpg and then resized as 1200 x 800 resolution images through "Easy batch Pro" app. When I uploaded them, they were extremely large. I've tried it several times and the result was always the same. Is it a problem with "Easy batch Pro" app, or something with Retina Display resolution? I also resized them as small size like 600x400, but the image was totally broke, and apparently had different look when I saw the original via aperture. What should I do?

What's the problem exactly? Call and complain. It's up to them on how they want to handle it, but if it's something normal or minor, they'll just fix the issue under warranty and send you on your way. That's how warranty works. In instances where a user has had repetative failure of the same kind or others with the same system, a complete replacement was done, but those were issues that border on the "it's a lemon" idea.

Question about image loading problem

Dear Java Gurus,
I am writing a simple Java Applet application. Basically what it does is every 3 seconds, it tries to get an image from a server and display it (also based on the browser�s client size to do some resize of the image to fit the width of the browser�s client area). But frequently I got this kind of exceptions:
----------------------------- Exception 1 --------------------------------------
Uncaught error fetching image:
java.lang.ArrayIndexOutOfBoundsException
at java.lang.System.arraycopy(Native Method)
at sun.awt.image.PNGFilterInputStream.read(Unknown Source)
at java.util.zip.InflaterInputStream.fill(Unknown Source)
at java.util.zip.InflaterInputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read1(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at sun.awt.image.PNGImageDecoder.produceImage(Unknown Source)
at sun.awt.image.InputStreamImageSource.doFetch(Unknown Source)
at sun.awt.image.ImageFetcher.fetchloop(Unknown Source)
at sun.awt.image.ImageFetcher.run(Unknown Source)
----------------------------- Exception 2 ------------------------------------------
sun.awt.image.PNGImageDecoder$PNGException: crc corruption
at sun.awt.image.PNGImageDecoder.getChunk(Unknown Source)
at sun.awt.image.PNGImageDecoder.getData(Unknown Source)
at sun.awt.image.PNGFilterInputStream.read(Unknown Source)
at java.util.zip.InflaterInputStream.fill(Unknown Source)
at java.util.zip.InflaterInputStream.read(Unknown Source)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read1(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at sun.awt.image.PNGImageDecoder.produceImage(Unknown Source)
at sun.awt.image.InputStreamImageSource.doFetch(Unknown Source)
at sun.awt.image.ImageFetcher.fetchloop(Unknown Source)
at sun.awt.image.ImageFetcher.run(Unknown Source)
Which will cause the image goes to blank in the browser and also degreed down the performance, and I do not know where they are coming from. I tried to put try-catch blocks at possible method calls, but still it does not catch these kind exceptions.
---------------------------- My Source Code ----------------------------
import java.io.*;
import java.awt.*;
import java.net.*;
import java.util.*;
import java.applet.*;
import javax.swing.*;
import java.awt.event.*;
// This is for Popup Menu
class PopupListener extends MouseAdapter
JPopupMenu popup;
PopupListener(JPopupMenu popupMenu)
popup = popupMenu;
public void mousePressed(MouseEvent e)
maybeShowPopup(e);
public void mouseClicked(MouseEvent e)
maybeShowPopup(e);
public void mouseReleased(MouseEvent e)
maybeShowPopup(e);
private void maybeShowPopup(MouseEvent e)
if (e.isPopupTrigger())
popup.show(e.getComponent(), e.getX(), e.getY());
// Image Component who contains the image and will be hosted in the ScrollPane
class ImageComponent extends JComponent
Image onscrImage;
Dimension comSize;
ImageComponent(Image image)
onscrImage = image;
setDoubleBuffered(true);
comSize = new Dimension(onscrImage.getWidth(null), onscrImage.getHeight(null));
setSize(comSize);
public synchronized void paint(Graphics g)
super.paint(g);
g.drawImage(onscrImage, 0, 0, this);
public Dimension getPreferredSize()
return comSize;
// Update the image with new image
public void setImage(Image img)
onscrImage = img;
comSize = new Dimension(onscrImage.getWidth(null), onscrImage.getHeight(null));
setSize(comSize);
// The main Applet hosted in the browser
public class MWRemotingApplet extends JApplet
//Media Tracker to manage the Image loading
MediaTracker medTracker;
Image my_Image;
// ScollPane who contains the image component
JScrollPane scrollPane;
ImageComponent imgComp;
// The applet base URL and image filename passed from htm who hosted the Applet
URL base;
String filename;
// Schedules getting the image
private java.util.Timer timer;
private int delay = 3000;
private boolean bFitToBrowser = false;
private int iVScrollbarWidth = 20;
// Popup Menu
JPopupMenu jPopupMenu;
JMenuItem popupMenuItem;
public void init()
// Set the layout to GridLayout then the it can fill in the Applet
setLayout(new GridLayout());
try
// getDocumentbase gets the applet path.
base = getCodeBase();
// Get the image file name from the parameter
filename = getParameter("filename");
catch (Exception e)
JOptionPane.showMessageDialog(null, "Failed to get the path and filename of the image!", "Message", 0);
return;
// Create the Media Tracker
medTracker = new MediaTracker(this);
// Download the image from the remote server
// If the image width is greater than the width of the current browser client area
// Resize the image to fit the width
// This is because for some reason, this will lead to image not refreshing
DownloadImage();
//Add the popup menu
jPopupMenu = new JPopupMenu();
popupMenuItem = new JMenuItem("Fit to Browser");
popupMenuItem.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent event) {
bFitToBrowser = !bFitToBrowser;
if(bFitToBrowser)
popupMenuItem.setText("Original Size");
FitToBrowser();
else
popupMenuItem.setText("Fit to Browser");
DownloadImage();
if(my_Image != null)
imgComp.setImage(my_Image);
jPopupMenu.add(popupMenuItem);
// Create the image component
imgComp = new ImageComponent(my_Image);
//Add listener to the image component so the popup menu can come up.
MouseListener popupListener = new PopupListener(jPopupMenu);
imgComp.addMouseListener(popupListener);
// Create the scroll pane
scrollPane = new JScrollPane(imgComp);
scrollPane.setDoubleBuffered(true);
// Catch the resize event of the Applet
addComponentListener(new ComponentAdapter()
public void componentResized(ComponentEvent e)
super.componentResized(e);
if(bFitToBrowser)
FitToBrowser();
else
DownloadImage();
if(my_Image != null)
imgComp.setImage(my_Image);
//Add Components to the Applet.
add("Center", scrollPane);
validate();
// Start the timer to periodically download image
// from remote server
public void start()
timer = new java.util.Timer();
timer.schedule(new TimerTask()
//creates a timertask to schedule
// overrides the run method to provide functionality
public void run()
DownloadImage();
if(my_Image != null)
imgComp.setImage(my_Image);
, 0, delay);
public void stop()
timer.cancel(); //stops the timer
public synchronized void DownloadImage()
if(my_Image != null)
my_Image.flush();
my_Image = null;
try
my_Image = getImage(base, filename);
catch (Exception e)
my_Image = null;
return;
medTracker.addImage( my_Image, 0 );
try
medTracker.waitForAll();
if ( my_Image != null )
medTracker.removeImage(my_Image);
catch (InterruptedException e)
JOptionPane.showMessageDialog(null, "waitForAll failed while downloading the image!", "Message", 0);
catch(Exception e1)
System.out.println("Get Exception = " + e1.getMessage());
e1.printStackTrace();
if(bFitToBrowser)
FitToBrowser();
else if(my_Image.getWidth(null) > this.getSize().width)
FitToWidth();
// Resize the image to fit the browser width and height
public synchronized void FitToBrowser()
if(my_Image != null)
my_Image = my_Image.getScaledInstance(this.getSize().width - 5, this.getSize().height - 5, java.awt.Image.SCALE_SMOOTH);//java.awt.Image.SCALE_AREA_AVERAGING);//java.awt.Image.SCALE_SMOOTH);
medTracker.addImage( my_Image, 0 );
try
medTracker.waitForAll();
medTracker.removeImage(my_Image);
catch (InterruptedException e)
JOptionPane.showMessageDialog(null, "waitForAll failed!", "Message", 0);
catch (Exception e1)
System.out.println("Get Exception = " + e1.getMessage());
e1.printStackTrace();
// Resize the image to fit the browser width only
public synchronized void FitToWidth()
if(my_Image != null)
int fitHeight = (int)((this.getSize().width - iVScrollbarWidth)*(my_Image.getHeight(null)+0.0)/my_Image.getWidth(null));
my_Image = my_Image.getScaledInstance(this.getSize().width - iVScrollbarWidth, fitHeight, java.awt.Image.SCALE_SMOOTH);
medTracker.addImage( my_Image, 0 );
try
medTracker.waitForAll();
medTracker.removeImage(my_Image);
catch (InterruptedException e)
JOptionPane.showMessageDialog(null, "waitForAll failed!", "Message", 0);
catch (Exception e1)
System.out.println("Get Exception = " + e1.getMessage());
e1.printStackTrace();
}

[url http://forum.java.sun.com/thread.jsp?thread=518979&forum=14]Please[url http://forum.java.sun.com/thread.jsp?thread=518977&forum=32] do[url http://forum.java.sun.com/thread.jsp?thread=518973&forum=37] not[url http://forum.java.sun.com/thread.jsp?thread=518978&forum=42] crosspost. Or [url http://forum.java.sun.com/thread.jsp?forum=7&thread=518976]double-post. Or post to the wrong forum. Or use non-sense subject.

Image Loading Problem with Sharp S770H

Similar Messages

Maybe you are looking for