Image quality of iDVD material

I use AfterEffects, as well as Final Cut Express, to create content. Recently I put together a program that was all AE, 24 fps, and output as a 16 bit per channel animation 'movie', ie high color resolution. When this program is played directly via Quicktime, everything is smooth.
However, after processing it to a DVD via iDVD 6.0.3, I see artifacts such as massive 'color' banding, as if the colors a subsampled to 4 bits. This is especially noticably in 'smooth gradient' areas of the image.
What of course is intersting when I 'play' the preview of the material, all looks correct, it is only after the conversion via iDVD to Mpeg2 that the results look like crap.
What is the format to give to iDVD which has the highest quality, and does the least damage to the resulting content.
Thanks,
John Clark.

There are several issues when creating media from 'something other than DV'. My work is predominantly stills at the moment, so some of these items may affect what you are trying to do.
For the most part my usual 'main goal' is to make computer/internet playable media, and so I don't usually worry about two things Pixel Aspect Ratio, and Frame Rate. Computers use 'square' pixels, and Video because of historical reasons, uses a rectangular pixel. This 'necessarily' introduces some changes in the image when converting. If one just forces the square pixels into the the rectangular, one gets distortion, ie round circles turn into elispses.
However, at the moment I need to make a 'promo' DVD and so I need to findout what the limitaitons, and what are the ways to make things as good as possible on DVD, and given that I don't have the money or even the call for making DVD's with more expensive tools, and perhaps actually more suited for my quality needs...
The next item is frame rate. I usually do 24 fps, that in itself is a form of compression, but I have been lately using the H.264 codec and it seems to be pretty good for my purposes.
Depending on the hardware being used to play, I will see some artifacts from dropping frames. But usually this is not so overwehlmingly objectionable... otherwise I'd figure what codecs and parameters to use to make things smoother.
DVD's use 'Mpeg 2' as their underlying format. Mpeg 2 is capable of handling 24 fps material, as well as 'high resolution', 'square pixels', etc. However, most of the Mpeg 2 compressors targeting DVD often are setup only to produce pixels in 4:3 or 16:9 aspect ratios.
In order for 24 fps to be correctly played at 29.97 fps it has to be converted.
In addition to any of the above, there is the 'compression' rate of the media. A Standard Definition video can be compressed to 6 Mbits/s data rate, with almost no 'human preceptable' loss. Going lower than this, usually introduces certain types of artifacts. Blocky 'big pixels' especially at the egdes of items in the image (usually very visible on 'photos'...), and of course the other way to compress is to make the color palette very 'small'.
I did an experiement where I took my 24 fps 16 bit/channel media, and then used Final Cut Express to encode it using the Apple HD intermediate codec. I saw some of the same artifacts as what I have seen on the iDVD output. However, it was far less than what iDVD produced.
I'm going to experiement with taking the Apple HD media and selecting the 'Best Quality' on the encoding, as opposed to 'Best Performance' (and as a subnote, background encoding... why these are somehow tied together is beyond me...)
On that topic when talking about encoding, it would be nice to know if iDVD produces a 2 pass variable bit rate package, or is it 1 pass and constant bit rate... while these probably were left out of any discription as being 'too obscure' for most casual users it would help analyze problems...

Similar Messages

Poor Image quality in iDVD from iMovie

After creating a video in iMovie using photos, video clips, transitions, music, and Ken Burns, things look great. Everything looks fine in iMovie ('09). I then export it to iDVD to create the menus, etc. So far so good. After burning the disc, the picture quality is really horrible, especially the photos using Ken Burns. I do not know how to describe it....wavy, pixilated, something. The video used, taken using a digital camcorder is tolerable if I remember to deinterlace. What do I have to do to get these pics to look right? IF I export in iMovie using Quicktime, the resulting .MOV is fine....looks great. After exporting to iDVD, it looks awful.....Any help would be appreciated....thank you.
jrsorte

Chris,
not using any de-interlacing
Both iMovie 08 and iMovie 09 only use one field of a DV video frame. iMovie 5 and earlier used both frames. I'm not sure that using just one field makes a lot of difference when the content goes through mpg-2's heavy compression to make a DVD in iDVD.
As far a still images are concerned, the best sizes for NTSC DVDs are 720x540 pixels for standard video and 854x480 pixels for widescreen. Going to larger image sizes can actually reduce the image quality on a DVD.

Poor image quality -slideshow iDVD-need help asap

Hello
does anybody know how to create a better quality slideshow???? It sim,ply does look totally unprofessional .. when the dvd is burned.
We have supersharp images .. but once the DVD is burned and you pop it back in the unit .. the images look fuzzy .. and not as crisp as when you actually run them in iPhoto, or iDVD...
this is really urgent .. I'd appreciate if somebody give us a hint ... what to do .. or is there an alternative to created 100% quality slideshows on a dvd.
We need to play the burned DVD's on a computer (to show to clients) as well as on a TV .. in case the client wants to view the DVD at home.
please respond to
[email protected]
Thank you!
I understand that it might look fuzzy on a TV screen .. but why does it look so bad on a computer screen? That is not a good way to present work/images .. please help!

Don't count on FCE or DVD Studio Pro to be better. I think your issue is with MPEG-2 compression.
I build my slideshows within iDVD, not iPhoto or iMovie HD. Here's an example:
Ireland 2004 iDVD Project
Nearly 800 images dragged into iDVD as organized folders from the hard drive. Transitions on each image, and menus, sub-menus, and sub-sub menus. The sub-menus are created by clicking on the Folder icon on the iDVD interface.
Main Menu has 6 buttons: Downpatrick, Antrim Coast, Letterkenny, Sligo, Trim, and Extras. Behind each button are additional buttons ranging from 3 to 6 buttons. The Extras button goes fairly deep. When you click on Extras, it gives you 3 choices on a new menu. The "B&Bs" button opens a new menu with 5 buttons. The "Movies" button opens a new menu with 4 buttons. If you click on the "Irish Music" button, you open a new menu with 2 buttons. At that point, you are at a "sub-sub-sub menu."
Music was on 95% of the slideshows. Some movies converted to QT DV from Canon S400 digicam .AVI files (iDVD 4). Now convert to H.264 with QuickTime 7. Images are original 4MP (2MB) JPEG images from the same digicam. This DVD project is around 4GB with all pictures as DVD-ROM content.
G4 DP 1.25 GHz 4 Drives 720GB Mac OS X (10.4.4) 2 SuperDrives (SL 8X & DL 16X)

Low image quality on idvd slide show DVD

Hi, I am trying to create a DVD that will play wildlife images. I have the images (In high ressolution, edited at photoshop CS2) and an audio file (Wildlife sounds)
I went to IDVD, choosed a theme, added an image as the entrance, add a slide show, added the images to the slide show, added the sound to the slide show and exported.
My settings in idvd are set to best quality.
The resulting DVD presents very low quality, saturation has decreased immensly, sharpness is gone. Audio VERY loud.
Is this the best quality iDVD can provide? Shall I use FCP (I wish to avoid it since I will like to make new versions of the cd as long as new images arrive, iDVD, if it provides good quality, will make life much easier.
By the way, I tried exporting a slide show from iPHOTO to iDVD but the resulting quality is extremely poor. I also tried to prepare the slide shows on iMOVIE but the results I get are not good either...
Is there anything I ma doing wrong? Should I change the settings somewhere womehow? or Should I forget about iDVD?
Hope to receive an answer soon. Thanks for your time. Cheers.
Jorge

See Preparing images for DVD slideshows at http://docs.info.apple.com/article.html?path=iDVD/6.0/en/17.html
I have the images (In high ressolution ...
Basically, that's an overkill. At this point (pre-HD capable burners) we are limited to the less than 640x480 pixel resolution of the NTSC system (or 768x576 pixel resolution of PAL).
You slide show should look 'fairly good' on a TV set or on your computer monitor viewed at 640x480.
Sorry.

IDVD 6 slideshow image quality

Still image quality in iDVD slideshows is a topic that comes up again and again on the iDVD forums.
Two and a half years ago, I made a test with an earlier version of iDVD. Now, with the release of iDVD 6, it was time to repeat the test.
Go to my page: http://homepage.mac.com/profpixel/iDVD_6size.html to see the test.
The results represent pretty much the best posible quality results you can get with still images in iDVD 6 because I used TIFF files and High Quality JPEG files (Photoshop level 10) in the test.
You can see just how much quality loss occurs in the iDVD 6 MPG-2 compression process.
Take a look and we can discuss the test further here.

I have updated some of my comments on the web page.

Image quality issues - Sony Handycam (MPEG) to iMovie / iDVD

I have read through dozens of posts but the recommendations vary widely and am hoping I can get some guidance specific to my situation. The image quality I am getting from home movies I edit in iMovie11 and burn to DVD in iDVD are far inferior to the original material.
I have a Sony DCR-TRV17. This camera is a little over 10 years old. It is a miniDV with 500 lines resolution, 680K gross pixels and uses MPEG. While not HD, the image quality is exceptional. The DVDs I used to create using my Sony Viao likewise looked fantastic. But the results I get from iMovie and iDVD are on par with VHS -- very poor, especially in low-light.
I hope the issue is just the settings when I import, edit (iMovie) and share to iDVD. I generally use the default settings, and often alternate settings don't seem to be selectable. It also sounds from other posts like iMovie sacrifices quality for reduced file size and increased simplicity? I would appreciate help with the following:
1) Please list the settings I should be adjusting from default when I a) import, b) edit in iMovie11 and c) share to iDVD and burn -- and the recommended settings for each
2) Is there a process I should be trying? Should I be creating test DVDs using different settings at each stage and then reviewing various setting combinations to find the best one?
3) I will most probably buy an HD camcorder very soon, and plan to burn to Blue Rays. I have no problem with going ahead and buying Final Cut and an external drive to burn Blue Rays. Should I just go ahead and do it and get away from iMovie / iDVD entirely. Will Final Cut solve this issue for my old miniDVs without a whole lot of hair pulling? Or will I still have to tinker with a bunch of settings or convoluted processes to get it "right." I never had to tinker with settings on my Viao. Really expected Mac software to be more user friendly…
Thanks very much for any help or advice!

On Import you could try unchecking Optimize video and choose Full Size. Your disk space however will get eaten up incredibly quickly choosing these settings as each hour of video = 40GBytes of disk space. So be forewarned about how big those files will expand as they come off the MiniDV tapes.
Another thing you will immediately see a difference in is how you move files from iMovie to iDVD. Share to iDVD while named in an intuitive way, is NOT the best way to get good quality DVDs out of iMovie. Instead you want to Share to Media Browser. Choose the Large Size setting. Then quit iMovie. Open iDVD, click the Media button, the Movies button. Find your project listed under the iMovie star icon and drag it into the iDVD project. Burn the Disc and see if you get a higher quality disk by Sharing to Media Browser instead of Share to iDVD.
If you choose a Blu-Ray burner, also get a copy of Roxio Toast. The encoding to Blu-ray that Toast provides will be top notch and prevent you from making mistakes as the recordable Blu-ray disks are more expensive than DVDs. So every mistake will be expensive.

IDVD and poor image quality on TV

I imported old VHS/VHS-C tapes into iMovie via Elgato Video Capture, using standard 4:3. I then edited my project iMovie and "shared" it to iDVD. However, on TV, image quality is horrid. What am I doing wrong?

As Old Toad writes BUT
• Share to Media Browser - AND as Large - not HD or the other resolutions as quality will degrade.
• burn on high quality media - I only use Verbatim DVD-R (as they play on more DVD-players)
• Set down burn speed to x4 = Less burn errors
• Encoding quality matters - I use Pro Quality most
else read my long long list on this.
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audsio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W

I want to make a copy of slide show create from my own photographs and with a an audio track behind them. I have carefully followed the iDVD tutorials and burnt the result to a disc but image quality is very poor. What is wrong?

I want to make a DVD of a slide-show with an audio track behind the photographs. I have carefully followed the iDVD video tutorials but the result is far from satisfactory. The quality of the images on the resulting DVD are blurred and indistict although the original photographs are of a very high quality. Where am I going wrong? Would I have better results from a different program than the inbuilt iDVD and if so so what programs have others found to be better? I should be grateful for some expert guidance.

Hey Falcopebo,
Thanks for using Apple Support Communities.
Looks like you have image quality issues when using iDVD to burn.
iDVD 7.0: Burned DVD has interlacing, pixelation, or image quality issues
http://support.apple.com/kb/ht4078
A standard DVD made by iDVD is made to the standard DVD resolution of 720 X 480, which is smaller than most HDTVs and monitors. When expanded to fit the entire screen or monitor, the image will distort slightly due to upscaling to fit the screen or monitor.
Have a nice day,
Mario

Idvd image quality problems??

Will the length of video on a dvd created with idvd affect the quality of the image? I have just created a dvd which is pretty packed 3.7 GB are used on the dvd. Most of the video looks great. However some sections later in the movie (which when shot at night were much darker anyway) are pretty pixelated. I have created a DVD with a main movie, chapter selections and an extras folder which contains a bunch of 3 minute clips. The only place I really see teh pixelated image problem is while viewing these 3 minute "extras" clips.
I am wondering if by creating a "packed" disk, the overall image quality was degraded. And, is it a general rule of thumb that you should not try and cram in as much video onto a disk as possible?
Thanks for any help.
Pete

IDVD looks a the length of things ... technically you can put two hours total video on your dvd (this includes motion menus, slideshows, music, etc) You select Best Quality to do this
And yeh, generally a longer video will affect the quality of the DVD. In general, tho, you need the "strongest" video you can get to stand up to the MPEG2 compression
DVD Studio Pro with Compressor, gives you more encoding options and you can become adept at "fudging the numbers"
But in my opinion, with iDVD, anything longer than 90 minutes total can lead you to potential probs

Poor image quality after burning with idvd

I used Final Cut Express to make a 45min movie. When I preview the finished product as a Quicktime file it looks great. BUT when I burn it with idvd, the quality of the video is terrible! Jagged diagonal lines, some color loss, some dancing pixels,...
I have been trying to find the solution to this problem for days on end, I have burned about 20 dvd's now, all in different settings and so on, but the quality is not improved.
First I thought it was my tv, but then I put the dvd in my mac and compared the same scene from my quicktime file with the scene on the dvd, and the difference in quality is staggering! For instance, diagonal white road markings are crisp on the quicktime file, but jagged on the dvd.
What is idvd doing with my movie????? Help me!

My Final Cut Express movie (.mov file) is crisp, and interlaced.
You are missing the point - your CRISP FCE movie is mpg-2 compressed by iDVD - that's what DVDs are - mpg-2 compressed video content. Unfortunately, mpg-2 is a very low quality CODEC compared to modern CODECs like h.264.
The best image quality out of iDVD will result in using the 'Best Performance' mode of encoding - this requires your content be under 60 minutes for a single-layer disc.
'Best Performance' encoding uses fixed bit-rate encoding that produces a DVD with about as high playback bit-rate as can be supported by set-top DVD players.
You have three choices: (1) live with the mpg-2 compression on a DVD because you can't do anything about it, (2) use the h.264 CODEC out of FCE and create a data DVD with the file that can be played back in computers, (3) make a Blu-ray disc if you have the equipment and buy the software.

Poor image quality using iMovie 8 or iDVD after importing DV file via FW

Hello,
i am a complete newby and asking for help. I have bought a Panasonic NV-GS320EG-S miniDV Camcorder. First i connected it via S-Video to my Pioneer Plasma which worked fine.
I have connected the camcorder via Firewire to my iMac 20/2,4 GHz, camcorder will launch import window, streaming works but in iMovie the image quality is already rather poor. I can cut files and all but after using Import film and burning it with latest Toast, picture quality is even worse, that means colors are natural but no sharpness, lots of shivering lines as soon as the angle is moving.
I've tried to import directly into iDVD with the direct transfer function for Firewire which works technically as well but the result is mainly the same, when i burn the DVD the picture quality gets far worse than via S-Video connection.
Last thing i tried is importing to iMovie, importing for media browser and reopening file in iDVD which burns the DVD later, all that works technically fine, but the image result remains absolutely poor, my wife meant inacceptable...
Any ideas what that could be??? I've always imported and exported the film with the largest picture mode possible...

I am using the Panasonic HDC-SD5 camcorder which records in AVCHD.
I also have a JVC miniDV camcorder.
The following is available in iMovie 08 help:If the larger sizes are not available, the original project media isn’t large enough to render in that size. The largest media size used in the project determines the final movie sizes you can render.
Tiny: Always 176 by 144 pixels.
Mobile: Always 480 by 272 pixels.
Medium: Varies in size from 640 by 480 pixels (standard aspect ratio) to 640 by 360 pixels (widescreen), depending on the size of the media in your project.
Large: Always 960 by 540 pixels (widescreen). No large size is rendered if your original video isn’t high definition (HD).

IPhoto Slideshow Image Quality when export to IDVD

Aloha ... I have two issues that I am having problems with when I export to IDVD. My images look very fuzzy (originals are very high res and print quality images} when exported to iDVD and a DVD is made. Also in the show my vertical images look fine and fill the screen yet on iDVD they are made shorter/squatier and upper and lower parts of the original image are lost. The format is wide screen as is the show. I am using a LCD wide screen TV if that helps. Any ideas out there?

Welcome to the Apple Discussions. Are you cropping your photos to the 16:9 ratio before creating the widescreen slideshow in iPhoto and exporting them to iDVD for a widescreen project? Most digital camera images are in the 4:3 size ratio and don't convert well to the widescreen. Also check the aspect ratio that you're playing the dvd in as that can have an effect on how the slideshow looks.
Also remember that the images going to iDVD will be reduced to 640 x 480 (normal TV) and slightly larger for the widescreen version. So the pixel dimensions of the original image are not that relevant.
Happy Holidays
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Image Quality Issues from FCE to iDVD

I've been attempting to take a 16 minute video shot in DV to a DVD and have been disappointed with the results. Using Final Cut Express, I've tried every codec but have found the image quality to be quite a bit less than the original DV footage. Also having a difficult time retaining the original 4:3 aspect ratio of the footage, despite specifying NTSC 4:3. When converting the footage to a Quicktime movie, the quality of the movie appears fine when played back on the Mac, but degraded when the final DVD is burned. Haven't used iDVD much, so the issue may lie there, but it's hard for me to believe that such a relatively small amount of footage would require so much compression that the final DVD image would show this much degradation from the DV footage.
Is there some magic combination of codec and size that I'm missing when converting to Quicktime?

Your FCE Easy Set should be DV NTSC.
Your FCE Sequence Settings should also be DV NTSC.
Export a QuickTime Movie using Current Settings, Self Contained.
Bring that file into iDVD where it will be converted internally to MPEG 2.

Hi all, my first time on. I shared my imovie project to Media Browser. Fine. Then after it downloaded it 'disappeared.' Where did it go? Having found it, how do I then share it with idvd? I am told the image quality will be much better this route.

Hi all, my first time on. I shared my imovie project to Media Browser. Fine. Then after it downloaded it 'disappeared.' Where did it go? Having found it, how do I then share it with idvd? I am told the image quality will be much better this route.

Hi
I do
• In iMovie - select a project
• Share to Media Browser and as Large (not HD or other res.)
• Close iMovie
• Open iDVD and select to start a New iDVD Project
• Import movie - from Media button - down to the right - and here from Movies
Yours Bengt W

Really bad image quality when burning

Hi, i am very new at this discussion thing and am a french speaker so hope i do this ansking question ok.
I'm having problems with image quality of my 1h46 min movie imported from imovie (initially from quicktime made from final cut pro). I am having pixelly images when camera is moving... Although have read some things about this on the forum none of the answers seem to resolve my problem.
I have selected best quality in my prefs but with no success. I figure it's a compression / codec problem but i do not have a clue about all this technical stuff. I don't know what next move i should make.
Thanks for any help...
V
I'm using iMac G5 divided my 250 GB in 2 disks wich has 31 Go of free space on my HD at the moment. Using iDVD and i Movie 6.0.2
Imac G5 Mac OS X (10.4.7) 2.1 GHz Power PC G5, mémoire 1.5 GO DDR2 SDram

Hi ! Thanx for responding...
In FCP i did choose export DV/NTSC and imported from camera with apple firewire NTSC (720x480). Should i have imported material in (640x480/30fps/interlaced...) ?
I have had this problem with smaller projects of 20 min of video also so i don't think it has to do with size... At the moment i am making a disc image of my dvd on my desktop hoping to burn through Toast. Otherwise i am also thinking about exporting movie from FCP to tape then importing back to iMov through camera...
I'm kind of desperate and don't really know what to do... I'm also gonna start reading compressor 2 and maybe forget about iDVD an d just burn it through toast. Wich is kind of dissapointing cause without interface, menu and all...
V

Image quality of iDVD material

Similar Messages

Maybe you are looking for