Image re-naming issue

I wanted to make a site-wide image change. I made a smaller image than the previous one and labeled it the same as the original image. I uploaded it to my DW folder, "put" it and for some reason it's a mess now. It appears that it reatined the size dimensions of the old image. I thought the new one would replace the old one and that would be it. Is there a better way to do this? This particular image is on my site hundreds of times, so I don't wnt to have to change it one by one.

When you first place the image, the dimensions of that image automatically get set into the coding. What you need to do is use the Edit>Find and Replace and do a sitewide change in the code. Highlight the code first then hit Edit>Find and replace.
IE:<img src="images/001.JPG" width="300" height="225" alt="whatever" />
to: <img src="images/001.JPG" width="10" height="20" alt="whatever" />
Just replace the dimensions with the proper dimensions of your image, and voila!
Remember to choose in the drop down menu: Find in: "Entire current local site"

Similar Messages

Orgchart export to image: special characters issue

Hello,
Using Orgchart Accelerated 2.01.
We have an issue when exporting to image. The issue happens when org unit name or attributes contains some special characters like é or ë (common in French). In the jpg export, these characters are being replaced by some square characters. In the preview and in the application, everything is displaying just fine.
This doesn't happen for ppt export (pdf export still not functionning)
Thanks,
Laurent

HI Laurent,
This is quite unusual. As far as I am aware the OrgChart Accelerated solution only supports English at present. However, you should raise an OSS message via Service Marketplace as I would expect it to export these characters okay.
Many thanks,
Luke

Random Image PHP Scipt Issue

I am using a
PHP random image
script on a site in which I have 2 different images on each
templated page (random images throgh a site). The two images call
to 2 different folders with the random image script in them (to get
2 distinct images). Thus, 2 different random images. My issue is
that it seems that most browsers at some point do not call for a
new image but use what was there in the last page as it is the same
name:
http://ansano.com/asl/images/random/top/random_image.php
or
http://ansano.com/asl/images/random/bottom/random_image.php
Any idea of how to force a browser to call the PHP script? Or
how to change it so it works site wide?
Thanks!!

I've now been sitting looking for this for a while. I don't seem to be able to get it to work.
Do I need to host to a folder first and then to the FTP server after?
I don't seen to be able to find the new page (TEST PAGE) in the folder I used to publish the site to before I went online. Tried searching for it in finder but I don't get any results on (TESTPAGEfiles).
I can see what you are talking bout I only publish to a local folder but I want to publish via the FTP option in iWeb.
Thank you very much for helping me

Iscsi lun (devise/disk)naming issue

disk naming issue ,showing two different names in format and powermt output
in format the emc lun pseudo name comes as emcpower0d
in powermt o/p Pseudo nameas emcpower0a
bash-3.2# echo|format
Searching for disks...done
c7t0d0: configured with capacity of 599.98GB
c7t1d0: configured with capacity of 599.98GB
c7t2d0: configured with capacity of 599.98GB
c7t3d0: configured with capacity of 599.98GB
emcpower0d: configured with capacity of 599.98GB
AVAILABLE DISK SELECTIONS:
0. c0t5000CCA0258D2994d0 <SUN600G cyl 64986 alt 2 hd 27 sec 668> solaris
/scsi_vhci/disk@g5000cca0258d2994
1. c0t5000CCA025923A9Cd0 <SUN600G cyl 64986 alt 2 hd 27 sec 668> solaris
/scsi_vhci/disk@g5000cca025923a9c
2. c7t0d0 <DGC-RAID5-0223 cyl 61438 alt 2 hd 256 sec 80>
/iscsi/[email protected]%3Acx.fcnmm123301003.b10004,0
3. c7t1d0 <DGC-RAID5-0223 cyl 61438 alt 2 hd 256 sec 80>
/iscsi/[email protected]%3Acx.fcnmm123301003.b00002,0
4. c7t2d0 <DGC-RAID5-0223 cyl 61438 alt 2 hd 256 sec 80>
/iscsi/[email protected]%3Acx.fcnmm123301003.a10003,0
5. c7t3d0 <DGC-RAID5-0223 cyl 61438 alt 2 hd 256 sec 80>
/iscsi/[email protected]%3Acx.fcnmm123301003.a00001,0
6. emcpower0d <DGC-RAID5-0223 cyl 61438 alt 2 hd 256 sec 80>
/pseudo/emcp@0
Specify disk (enter its number): Specify disk (enter its number):
bash-3.2# powermt display dev=all
Pseudo name=emcpower0a
CLARiiON ID=FCNMM123301003 [tnpmsun4.persistent.co.in]
Logical device ID=6006016002053200401C39F6320DE211 [tnpmsun04_vol]
state=alive; policy=CLAROpt; queued-IOs=0
Owner: default=SP A, current=SP A Array failover mode: 1
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
4608 iscsi c7t2d0s0 SP A1 active alive 0 0
4608 iscsi c7t3d0s0 SP A0 active alive 0 0
4608 iscsi c7t1d0s0 SP B0 active alive 0 0
4608 iscsi c7t0d0s0 SP B1 active alive 0 0
is their any issues or can i ignore it???
else is tehir any way to make both names common?
Thanks

Partition report and zpool create
Partition table as report:
partition> print
Current partition table (default):
Total disk cylinders available: 2558 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 0 0 (0/0/0) 0
1 swap wu 0 0 (0/0/0) 0
2 backup wu 0 - 2557 5.00GB (2558/0/0) 10477568
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 usr wm 0 - 2557 5.00GB (2558/0/0) 10477568
7 unassigned wm 0 0 (0/0/0) 0
root@email-test-v440:/# zpool create luminis_pool c5t64d0s6
cannot open '/dev/dsk/c5t64d0s6': I/O error

[naming issue] how to call a method...

Now, this may sound silly, but believe me, for a non-english guy sometimes those naming issues are really serious (especially when you know someone else is to see your code). So what I'm doing is a network simulation software (my b.sc. project). How would you call a method that takes traffic into a queue/network node (let's call it METHOD1 for now) and a method that pushes that traffic out (METHOD2). It's more or less like this:
class TransmissionLine{
   private Node node1;
   private Node node2;
   public void performAction(){
      node1.METHOD1(node2.METHOD2());
      node2.METHOD1(node1.METHOD2());
}Right now they are called TrafficUnit push(), and void pull(TrafficUnit tu). Seems good for me since the first pushes its traffic out, and the second pulls it in, but I dont know - it doesn't sound pro ;) Please let me now what you think and what would you call them. Thanks!
Best Regards,
M.

I think when you're talking about some functionality that links two classes together, one of which needs to generate data and the other which needs to receive data, send and receive is probably still a good choice. Even if you're not talking about a network, you're talking about two independent parts of a system. Think of them as little machines that build up your program, and that might give you a good idea of how you should name them.
On the other hand, if you're just looking for readable code, pick something that makes sense to you if you were describing the method to someone else, and then make sure you write clear comments. Even if you pick a name that's not perfect, the comments will make up for it. Something like:
* Gets the traffic coming in so that it can be processed.
* @param node The sending node
* @return The traffic data from the sending node
public TrafficData pull(TrafficUnit node)
* Sends the traffic data out to the target after processing.
public void push()
..This will always be better than...
public TrafficData receive(TrafficUnit node)
public void send()
...

Card Image Number and Issuer Id Number

Hi
I want to get card image number and issuer id number of jcop card, I have tried GP command as below but getting error. Any help
cm> /send 80CA0042
=> 80 CA 00 42 ...B
(9096 usec)
<= 6A 88 j.
Status: Reference data not found

hi Thanks for replying,
Command you guys have suggested gives information as below, but it still does not gives issuer identification number and card image number. (unique to chip)
IC Fabricator : 4070
IC Type : 5072
Operating System ID : 4051
Operating System release date : 4204 (22.7.2004)
Operating System release level : 2200
IC Fabrication Date : 5049 (18.2.2005)
IC Serial Number : 00606190
IC Batch Identifier : 7113
IC Module Fabricator : 4070
IC Module Packaging Date : 0000
ICC Manufacturer : 0000
IC Embedding Date : 0000
IC Pre-Personalizer : 0317
IC Pre-Perso. Equipment Date : 1430
IC Pre-Perso. Equipment ID : 36303631
IC Personalizer : 0000
IC Personalization Date : 0000
IC Perso. Equipment ID : 00000000

Weird iTunes naming issue

So I've got this bizarre naming issue in iTunes that is driving me crazy. Any help would be much appreciated.
Occasionally, and somewhat randomly, when I drag a folder of mp3's into my iTunes, it automatically adds a square [that wingding-looking symbol that usually denotes an unreadable character] to the end of every song, artist name, and album. Renaming wouldn't be a big problem, except it won't seem to work. When I go into the file info and try to rename, there's (1) no square that shows up in any of the fields for me to delete, and (2) no effect even if I retype each song, artist, album, etc.
It's driving me nuts, because especially in the artist field, iTunes reads the artist name with the square at the end as a different artist, which has the effect of making my library and iPod a mess.
I would be incredibly grateful for any help that anyone could provide. I'm going nuts trying to figure it out. Thanks in advance.
-Josh
Compaq Windows XP Latest version of iTunes

Dave
A certain number of Genres are hard wired into the app and can't be gotten rid of. However, all you need is one track to be given a genre like - Hip-Hop Classical Opera - for that to turn up in the genre list. The best way to track these down is to use the Browser (apple-b). Selecting a genre in the left hd column will list the tracks that carry that genre, and you can then edit them using the apple-i command.
Regards
TD

Disk Utility doesn't finish creating new disk image - naming issue??

Recently I upgraded to Snow Leopard and carried along an empty disk image created in OS 10.4.11. I use these for archiving data on read-only DVDs and password protect the images.
In the earlier OS, I found the practical limit for the dmg was 4.3 GB, containing 4.27+ GB of data (anything larger failed when attempting to burn data DVDs). Today, when I looked at my empty dmg file, the OS 10.6.6 Finder showed it to be larger both inside and outside (just under 4.7 GB inside I think - didn't write it down). I suspected that it may be corrupted or at least not give correct directory information, so I deleted this dmg as a precaution and tried to make a new one with the old size by selecting custom size within Disk Utility. Now every time I try to create a new dmg this it stalls at about 100 MB.
The image format panel has several additional settings in OS 10.6 . There are two places for names - in the "Save as" field above and in the "Name" field below. (Haven't yet found any documentation where the reason for this is explained or which lists possible name limitations. The Help info appears to be identical to what was in 10.4) I've tried making both names the same, but it still stalls
Disk Utility settings:
Save as __Diskname
Name in lower field __Diskname (have also left it blank no difference)
Custom 4.3 GB
Mac OS Extended (journaled)
128 bit encryption
single partition
read/write format* (also tried CD/DVD master - no difference)
* All files are not necessarily added at once so I'm pretty sure I want this to be read/write
Message was edited by: James Kilgore
In case this isn't obvious I mean read/write formatting on the hard drive, but when burned the format will remain the same whether or not the disk used is rewritable

Hi Michael,
Did you reformat it HFS+ or something else?
Some USB2 Flash Drives Write at a disappointing USB1 speed, but Read at USB2 speeds.
From what I can find, that isn't one of them and should take maybe an hour & a half to transfer 30 GB to it. Of course if write speed IS USB1, then you could expect 2 days or more.
I'd stop it. Reformat it, then make the Image on the HD and try transferring it.

Saving images and catalogue issues.

Hi,
I have been using LR for a few months now and have watched countless tutorials (a lot of Adobe.tv) I am having major issues with staying on top of my numbering and filing system and really need some tips. I try and explain.
When I first open the import box I have a look through and uncheck all the photos I have decided are no good and import the rest, I use the convert to DNG route. I also shoot in both JPEG and RAW, but I don't import the JPEGs, I use them for reference, I add generic keywords and rename with the date (I've still not decided on a naming convention yet)
I then use the compare function and delete some photos that were otherwise identical, then I work through the photos and edit them. The trouble I have generally begins here. I am happy with the export box and choose my settings, but if I decide to edit any in photoshop I do it through LR and save it as a PSD. So now I have both the PSD and the DNG. If I try and rename them the numbering systemn goes to pot because there's a PSD in there. I also find occasionally that it renames each JPEG and associated DNG file seperately so 40 photos becomes 80
Then I export my images only to discover the colour is over saturated so I need to re-edit/ import and then this adds to the confusion as I can't replace the current image as I need to figure out what the hell I need to correct!
In short, I seem to be getting in quite a pickle! I'm not sure I've explained it very well. All I want to do is rename, edit, export to show off to family and friends, without taking four hours to do eight photos
Many thanks in advance for any help offered.

Sorry you've been overlooked.
Yes you are making things difficult for yourself.
I recommend you watch some videos on AdobeTV to find out how to get the most from Lightroom with the smallest effort!!
http://tv.adobe.com/product/lightroom/

Batch Exporting File Naming Issue

I have to batch export about 30 images at a time, but I am having an issue now that the "Export" piece of the action includes a specific file name in the "save in" property, where as it's supposed to only include the name of the containing folder. This causes all the images included in the batch to be saved with the same file name thus saving over the previous export each time. I cannot figure out how to execute the Save for Web and devices action without it recording the specific file name.
My process is:
- Open one image
- Create a new Action (it begins recording)
- Crop the image
- Save for Web and devices (I leave the file name as is, but save it to a different folder) Ex. "annoying_child_screaming.jpeg"
- Close without saving
- Stop the action
- File > Automate > Batch
- I select the source folder with all the original photos
- Specify a Destination folder (a different folder where all the cropped ones will be)
- I don't select any checkboxes
- File Naming: I leave the default "Document Name" + "extension" Starting serial#: 1
When I hit okay, I can see Photoshop going through each image and doing the specified actions, but instead of preserving the original file name, it saves each one with the file name that I saved the first one when originally creating the action (Ex. it rewrites "annoying_child_screaming.jpeg" for each file)
I just upgraded to CS5 from CS4 (where I hadn't been having this problem). I have compared my settings to a coworker's who's computer it does work on, but we can't figure out what's wrong. The difference is in the Export details in the Actions dialog box - where it has the "IN" property, usually only a folder location is specified, but on my comp, it also specifies the file name.
Please help.

When you record the save for web step use the original file name
(you noted you did that in post 1)
Is the name you used the same as the file
you opened when recording the save for web step?
Don't specify any destination in the batch dialog or the files will possibly
be overwritten and you'll see the results your seeing.
The destination is the folder you specified during the save for web step while recording the action.
MTSTUNER
Message was edited by: MTSTUNER

Anyone know Disk Utility, Ignore Ownership, and disk image DL DVD issues?

I am currently having issues with backup DVD's I burned using Disk Utility. I can put the dual layer DVD's in and the system reads them. When I try to pull a file off the Dual Layer DVD a circle with an X appears notifying me that I cannot copy the files to my desk top.
When I check the DVD's permissions it reads Admin (me) read and write with the ignore ownership checkbox checked...which means I should be able to pull files off the DVD. The only way I can currently get information off the DVD is to duplicate the entire disk to a new folder by selecting the DVD while holding down the Cntrl key and selecting duplicate. I have had other issues with DVD's and disk images in Leopard....including having to eject either through disk utility or by selecting the image with the Cntrl key held down. Finder eject, keyboard eject, and the menu eject selections suddenly report that the disk is in use.
The DVD's were burned by creating a dual layer dvd image through disk utility with the read/write option checked.
After duplicating 2-3 disks, the system itself is unable to mount any more disks from the series of backups. When I look at disk utility it reads that the disk is not mountable. I have to restart my computer so the system can continue to read the backups.
My Itunes disk backups are marked the same way (ignore ownership) with admin read/write privlages....I have no problem pulling files off these disks.
I have tried both logging in as root and booting from an external drive...same problem. Is this some nasty Disk Utility bug? Is anyone else having bizarre permission related issues with Disk Utility and Disk Images.

When you create the image in Disk Utility, did you
change the 'Partitions' setting?
If you leave it to read 'CD/DVD', it will create a ISO9660/UDF image.
To be able to maintain permission and extended file attributes, you
need to select 'GUID Partition Map'.
I assume you used iTunes to create your music backup?
It seems it creates the correct image type for you.
Before sending this message, I actually created a single layer image,
copied some files to it and gave additional permissions to other users on my system.
Afterwards I copied the files to my Desktop, verifying that the attributes are still intact.
Best regards
(It took quite a while to burn this 4x DVD-RW Anyways, I hope I could help)

IStore Images Batch Load Issue

Hello All,
We have been working on setting up a Batch load for product images for our iStore and have run into an issue. First off, this is more of a batch association since we are using already existing items.
The issue we are having is that we are using APPS.IBE_LOGICALCONTENT_GRP.SAVE_DELETE_LGL_CTNT API to tie the images to the items. The process runs without error, but on inspection of the iStore page, the link to the image is bad causing no image to be displayed. Going through the iStore Admin and checking the Catalog / Content everything looks fine.
If I remove the association to the content for the item, apply the change, then re-associate the content and apply, everything works fine. So, it would appear that the content is not the issue. We will be loading 1000+ image associations, so having to manually fix each one is not a very good option.
After creating the Item - Content association, is there another API or something else that needs to be run so that the image correctly shows up on the iStore?
Thanks
Kyle

1. Did you try using save_logical_content API.
2. Did you verify the table IBE_DSP_OBJ_LGL_CTNT, IBE_DSP_LGL_PHYS_MAP. If data exists, Please send me an email to [email protected]
Thanks
RK
925 998 1494
[email protected]
Independent Consultant

Image gallery tweening issue

Hi,
I use this smooth, nice (and simple) image gallery, and I am very happy with it. However sometimes some of the images stops when rolling in, and I have to press Fw again to jump to the next one. I can't figure out where the bug lies, as I mentioned it appears rarely but it blows up the whole thing.
Maybe somone could take a look at it:
Thanks!
import fl.transitions.Tween;
import fl.transitions.easing.*;
import flash.utils.Timer;
import flash.events.TimerEvent;
var currentImg:uint = 0;
image_2.x=-1500;
var imgArrayFw:Array = new Array(image_2, image_1, image_3, image_4, image_5, image_6);
var imgArrayBw:Array = new Array(image_2, image_1, image_3, image_4, image_5, image_6);
buttonFw_btn.addEventListener(MouseEvent.CLICK, doNextTween);
function doNextTween(e:MouseEvent):void
    imgArrayFw[currentImg].x = -imgArrayFw[currentImg].width;
    var myTween:Tween = new Tween(imgArrayFw[currentImg], "x", Strong.easeInOut, imgArrayFw[currentImg].x,0, 2, true);
    addChild(imgArrayFw[currentImg]);
addChild(buttonFw_btn);
addChild(buttonBw_btn);
currentImg = (currentImg+1)%imgArrayFw.length;
buttonBw_btn.addEventListener(MouseEvent.CLICK, doPrewTween);
function doPrewTween(e:MouseEvent):void
    imgArrayBw[currentImg].x = imgArrayBw[currentImg].width;
    var myTween:Tween = new Tween(imgArrayBw[currentImg], "x", Strong.easeInOut, imgArrayBw[currentImg].x,0, 2, true);
    addChild(imgArrayBw[currentImg]);
addChild(buttonBw_btn);
addChild(buttonFw_btn);
currentImg = (currentImg+1)%imgArrayBw.length;

I'd recommed never using the included Tweening classes and start using a good tweening engine like TweenLite/TweenMax from greensock.com. The Adobe ones are slow and problematic - one of the issues they have is tweens stopping like you described. It should be pretty simple to swap out to using tweenlite and once you do, you'll find the syntax much easier.

Image Field - Scaling Issue

Hi,
I'm using Interactive Forms for priting sales orders. For each line item I display a small product image in an image field. For this image field I use the setting "Sizing - Scale Image Proportionally". If I use this form as a print form evrything works fine, the image is being scaled correctly. But if I use it as an interactive form (parameter /1BCDWB/DOCPARAMS-FILLABLE = 'X' ) the following occurs:
The image is being resized to fit into the image field. It looks like using "Sizing - Scale Image to Fit Rectangle". The funny thing: If I use a default image for this field, it is being displayed correctly in the "Body Pages" tab, but not in the "PDF Preview". It's only being scaled proportionally if in the form properties the preview type is "Print Form" (or parameter /1BCDWB/DOCPARAMS-FILLABLE = ' ' ).
In my eyes it looks like an ADS issue. But maybe somebody of you got an idea how I could fix that problem.
Thanks & regards,
Matthias

hi,
the process which u followed is correct but the thing is u hv forget to enable the check box called "embedded image"........ which will be present in the image properties.......... if u enable this check box then the image will be displayed in pdf preview.
I hope i solved the issue.
Thnx,
Vishnu

File naming issue/workflow help needed...

I shoot weddings and am continually frustrated with A2's file naming. Any suggestions or help would be greatly appreciated as it's killing my workflow.
THE GOOD: I import the images with the file name I want and the metadata I want. I then edit out, deleting bad images and leaving borderline images (as outtakes) in the project while putting my selects together for the client in a smart album. I put the selects in a smart album based on their rating and keywords. The selects are not sequential, so I "select all" and make "batch change" putting them in sequence.
THE BAD: Here is where I always encounter my first problem. Any images I have have worked on (in Photoshop) for my website now have different names. So when I export all in the album, the worked-on versions don't fit in sequentially. And some stacks have the edited image on top, and others do not.
The other problem is when a bride places an order. I find the corresponding file and externally edit it. It now resides in the smart album with a different name than all the files around it. I put the print size in the exported version name and I have to open the dialog box for every single image and re-type the size in the custom name space. I have an order with 295 different images and it's killing me. The other problem is when the bride goes to re-order a print she has, the number on the back has no connection to the numbers on my site or the smart album.
I find I'm going back to Photomechanic more often just to organize and name images because it actually changes the name of the file instead of "masking" it as A2 seems to do.
Is there a way to keep A2 from doing this and how do I get the adjusted image to be the pick of the stack?
Thanks-Kevin

I happily paid the 20 bucks for 'A Better Finder Renamer' and was able to have it batch rename RAW files to my needs. It uses simple Boolean logic to cut or add to a file name and can read time stamps from the file.
http://www.apple.com/downloads/macosx/productivity_tools/abetterfinderrename.htm l

Image re-naming issue

Similar Messages

Maybe you are looking for