Orgchart export to image: special characters issue

Hello,
Using Orgchart Accelerated 2.01.
We have an issue when exporting to image. The issue happens when org unit name or attributes contains some special characters like é or ë (common in French). In the jpg export, these characters are being replaced by some square characters. In the preview and in the application, everything is displaying just fine.
This doesn't happen for ppt export (pdf export still not functionning)
Thanks,
Laurent

HI Laurent,
This is quite unusual. As far as I am aware the OrgChart Accelerated solution only supports English at present. However, you should raise an OSS message via Service Marketplace as I would expect it to export these characters okay.
Many thanks,
Luke

Similar Messages

Special Characters issue---u00FA ,u00A3---- in Reciver SOAP Adapter

Hi ,
I am facing issues with Spceial Characters ú ,£ at the reciver SOAP adapter ,the messages was stuk in XI with to the following error :An invalid character was found in text content. Error processing resource
I tried in several ways buy using XMBWS.XMLEncoding=iso-8859-1,
but it was not resloved still I am getting the same error,
Any one plz suggest me how to resolve this issue....
Regards,
Teja.

Hi ,
My scenario is RFC--SOAP ,the messages was successfully rached to RFC adapter and I am facing the issue at the receiver SOAP Adapter ......
I am getting error messages such as :
1) 400 Bad Request
2) In the XML Payload ......It is showing as Invalid Character found ....
For this I tried ...
1) In the source payload XML I done the chages in the encodding part
encoding part as iso-8859-1instead of utf-8.
2) I have triggered the message from Integration Engine ....then it was successfully processed through SOAP Adapter
3) with special characters...means there is no issue at target end.
4) the issue lies in XI so we have to resolve it.
I tried by using Adapter paramters which was provided by SAP but the result is same..
so the paramters which was provided by SAP are incorrect(for encoding)
Please help me in resolving this issue .........
Regards,
Teja.

Special Characters issue in DEV and QAS

Hi,
I am uploading a file that has special characters (Japanese).
In the DEV system the special character is converted to #. Which the business wants.
In QAS system the special character is not converted and is as it is, which makes the business users difficult to find out if any speical characters are there and they don't want the special character as it is
The file consists millions of record with a possibility of four or five records with special characters
The special characters on keyboards is not an issue.
The programs in DEV and QAS system are same and the file tested is also the same but different results.
Tried in Tcode SNLS to find something but didn't know what and where to look into.
What could be the issue in this? Looks like this is Basis issue but would like to know if anyone can let me know.......
Regards
Sandeep

Hi ,
i want to check ur open dataset statement in the program which is being used here if at all in ur case.
Can you please check the relavant code page in both the D and Q systems and search with the appropriate hexa decimal values(for the special characters ) in both the systems ..
u can use code page by tcode scp ..
ex -> as u say a special char sp1 is having entry in q and code page which is being used (like 4200 )
is not having in d03 .
then if in d03 this page has no entry then it shows as # , since it is showing in q then it has an entry over there. this is my guess..
so if at all the client wants not to see this special char's , u need to remove them from this code page.. and check ..
Cant say if this can solve but u can take this as one more way of dealing with code pages and special chars....
br vijay..

Special characters issue in output XML - file adapter - SOA 10.1.3.4

Hi,
I use a DB adapter and File adapter to retreive data from database and create output XML file.
For the database record which have special characters (for example ' , <, >), it will just output the same character in XML file, which cause other system to reject this XML file because of those characters.
Anyone have this issue ? How can i resolve that ?
Thanks

Try converting the characters to < and >. This should work. Make sure the stand-alone & character is converted to & amp; (written with space as HTML will convert it back to &).
-AR

How export datas with special characters from SQL Developer?

Hi.
I'm doing an import of datas of a table, but this table have special characteres in specific accents (á,é,í,ó,ú), my source table have for example "QRCN Querétaro, Candiles" but when I done an export from opcion Tool --> Export DLL (and Datas) from SQL Developer generate the next script
Insert into tablexxx(CADENA,NUMERO_FARMACIA,SUCURSAL_REFERENCIA) values ('C002','20280','QRCN Quer?ro, Candiles');
How can I do for export my datas and generate the script correct?
Insert into tablexxx(CADENA,NUMERO_FARMACIA,SUCURSAL_REFERENCIA) values ('C002','20280','QRCN Querétaro, Candiles');
thanks.

Hi sybrand_b,
1. In my SQL Developer I select Tool-->Export DDL (and Data).
2. I Select name file, connection (this is a remote DB), objects to export in this case I select 'Tables and data' and table name to export
3. Run the procedure and generate the script following:
-- File created - jueves-julio-01-2010
-- DDL for Table TABLEXXX
CREATE TABLE "BOLINF"."TABLEXXX"
(     "CADENA" VARCHAR2(50 BYTE),
     "NUMERO_FARMACIA" VARCHAR2(50 BYTE),
     "SUCURSAL_REFERENCIA" VARCHAR2(200 BYTE)
-- DATA FOR TABLE TABLEXXX
-- FILTER = none used
REM INSERTING into TABLEXXX
Insert into TABLEXXX (CADENA,NUMERO_FARMACIA,SUCURSAL_REFERENCIA) values ('C002','20280','QRCN Quer?ro, Candiles');
Insert into TABLEXXX (CADENA,NUMERO_FARMACIA,SUCURSAL_REFERENCIA) values ('C002','20281','QRCG Quer?ro, Corregidora');
Insert into TABLEXXX (CADENA,NUMERO_FARMACIA,SUCURSAL_REFERENCIA) values ('C002','20282','QRFU');
Insert into TABLEXXX (CADENA,NUMERO_FARMACIA,SUCURSAL_REFERENCIA) values ('C002','20283','QRFU');
Insert into TABLEXXX (CADENA,NUMERO_FARMACIA,SUCURSAL_REFERENCIA) values ('C002','20284','SAUN San Lu?P, Universidad');
Insert into TABLEXXX (CADENA,NUMERO_FARMACIA,SUCURSAL_REFERENCIA) values ('C002','20285','SAEV San Lu?P, Eje Vial');
Insert into TABLEXXX (CADENA,NUMERO_FARMACIA,SUCURSAL_REFERENCIA) values ('C002','20286','SALB San Lu?P, Los Bravo');
Insert into TABLEXXX (CADENA,NUMERO_FARMACIA,SUCURSAL_REFERENCIA) values ('C002','20287','SAAL San Lu?P, Alvaro Obreg?');
Insert into TABLEXXX (CADENA,NUMERO_FARMACIA,SUCURSAL_REFERENCIA) values ('C002','20288','SACA San Lu? Callej?n de Cod');
4. But my source table have the next datas.
Select * from TABLEXXX.
CADENA     NUMERO_FARMACIA     SUCURSAL_REFERENCIA
C002     20280     QRCN Querétaro, Candiles
C002     20281     QRCG Querétaro, Corregidora
C002     20282     QRFU
C002     20283     QRFU
C002     20284     SAUN San Luís P, Universidad
C002     20285     SAEV San Luís P, Eje Vial
C002     20286     SALB San Luís P, Los Bravo
C002     20287     SAAL San Luís P, Alvaro Obregó
C002     20288     SACA San Luís, Callejón de Cod
5. I have done a query to table nls_database_parameters.
NLS_LANGUAGE     AMERICAN
NLS_TERRITORY     AMERICA
NLS_CURRENCY     $
NLS_ISO_CURRENCY     AMERICA
NLS_NUMERIC_CHARACTERS     .,
NLS_CHARACTERSET     UTF8
NLS_CALENDAR     GREGORIAN
NLS_DATE_FORMAT     DD-MON-RR
NLS_DATE_LANGUAGE     AMERICAN
NLS_SORT     BINARY
NLS_TIME_FORMAT     HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT     DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT     HH.MI.SSXFF AM TZH:TZM
NLS_TIMESTAMP_TZ_FORMAT     DD-MON-RR HH.MI.SSXFF AM TZH:TZM
NLS_DUAL_CURRENCY     $
NLS_COMP     BINARY
NLS_NCHAR_CHARACTERSET     AL16UTF16
NLS_LENGTH_SEMANTICS     BYTE
NLS_NCHAR_CONV_EXCP     FALSE
NLS_RDBMS_VERSION     10.2.0.4.0
6. I have revised in Regedit-->HKEY_LOCAL_MACHINE-->SOFTWARE-->ORACLE-->ORACLE HOME and value for NLS_LANG=AMERICAN_AMERICA.UTF8
where should I change for export my datas correct?
or exist any form for export my datas?
thanks a lot.
regards

Turkish Special characters issue in ECC 6.0, while uploading into table

HI All,
We are working with Turkish special characters in ECC 6.0
We are uploading a CSV file containing characters like : İ, Ğ, Ş, Ü, Ö, as soon as the file gets uploaded to application server,
it gets converted to ? or # or Ý.
Also, we are reading the file using OPEN DATASET, ENCODING NON-UNICODE, IGNORING CONVERSION ERRORS, the same characters gets uploaded into the custom table i.e. Ý.
I have also tried saving the file in UNICODE / UTF-8 format, but the issue still remains.
I tried searching SAP Notes as well.
Any pointers to resolve the same will be helpful.
Regards,
Siddhesh Sanghvi

Dear Siddhesh,
Perhaps OSS note 508854 could help here.
Also please be aware that Turkish only runs on ISO codepage 8859-9 (aka Latin-5 / SAP codepage 1610).
I hope this helps.
Best regards,
Ian Kehoe

Special Characters Issue

Hi,
I am trying to load text data from a flat file which has some special characters in the text description like ö ø æ ü å. I have entered this in RSKC. Now when I look in the preview these characters are replaced by this symbol #. Can you help me out in figuring out what I am doing wrong and if there is anything I should be doing. I have loaded the same data in North America BW instance and it works fine. Now when I do the same in Europe system it is giving me the above error.Europe is on a unicode system whereas North America is not. May be if this helps.
Thanks,
Kal

Hi Kal,
Checkout the link below,
RSKC
Regards
Sajeed

Special Characters issue in JAXB Classes generated

Hi,
I have generated Java bean classes from an xml schema using JAXB 2.0 Content Model feature in Jdeveloper 11g. I have another class, which has a method testMethod which takes the Java Bean class object as input. I have exposed this method as java webservice. I am just printing the FirstName from the input I have got.
public String testMethod(TestBean testbean) {
testBean,getContact().getFirstName();
When there are some special characters like ï¿½, my java bean accepts and displays as Ã¯Â¿Â½. I printed the value directly in my getter method, but it prints differently.
How can I set my Java Bean class to use ISO-8859-1 as encoding.

Sorry but this has nothing to do with ADF. Please try in the right forum here https://forums.oracle.com/forums/category.jspa?categoryID=285

Oracle text search - special characters issue

Hi.
I'm facing a real annoying problem with text search query, and everything I've tried failed...
I have a table with a varchar column indexed by text index. The column contains special characters like '&', ',' and mainly- '-'. Since I want to disregard these special characters for searches I have created a basic lexer of type skipjoins for the column index. So now, the phrase 'aaa-bbb something'. for example, can be searched without '-', like this: 'aaabbb'. But I want to make it possible for this phrase to be searched with and without '-'. So, that when the user enters 'aaabbb' he will get the same results as when he enters 'aaa-bbb'.
In other words, This condition:
WHERE CONTAINS(column, '<query> <textquery grammar="context"> <progression><seq>'
||'aaabbb'
||'</seq></progression> </textquery> </query> ' ,1)> 2
Will return the same results as this condition:
WHERE CONTAINS(r.POI_NAME, '<query> <textquery grammar="context"> <progression><seq>'
||'aaa-bbb'
||'</seq></progression> </textquery> </query> ' ,1)> 2
Since text query treats the '-' sign as a minus sign and searches for 'aaa' which doesn't contain 'bbb', the only way I found to fix this was to wrap the search text with {}. like this:
WHERE CONTAINS(r.POI_NAME, '<query> <textquery grammar="context"> <progression><seq>'
||'{aaa-bbb}'
||'</seq></progression> </textquery> </query> ' ,1)> 2
This all went very well, until I wanted to create a relaxation query. like this:
WHERE CONTAINS(r.POI_NAME, '<query> <textquery grammar="context"> <progression><seq>'
||'{aaab}'
||'</seq><seq>'
||'{aaab}'
||'%</seq></progression> </textquery> </query> ' ,1)> 2
In this case, I would expect the first part of the query to return no results (since it's not the whole word) but the second part, using '%' should have returned the record of 'aaa-bbb'. It doesn't. It will only return my result if I remove the '{}' for the second part. I can't do that, because the exact same search, when containing '-', will not return the expected results when I remove the braces (the sign is treated as minus sign):
WHERE CONTAINS(r.POI_NAME, '<query> <textquery grammar="context"> <progression><seq>'
||'{aaab}'
||'</seq><seq>'
||'aaa-b'
||'%</seq></progression> </textquery> </query> ' ,1)> 2
So I now have no solution. My question is- How can I create a query that will disregard the minus sign and treat it as a regular sign, but would still handle percentage sign as a special sign. So that I could run a query like the last example and will get the results of searching the phrase 'aaa-b%'?
In short, and to simplify my question, I'm looking for a way to escape all characters (not only the minus sign) except for a specific character. Kind of like 'unescaping' a specific character (the '%' sign) within braces {}. Or, another way would be to remove the space that is added to the phrase inside the braces at the end of the word, preventing me from adding "%" at the end of the word, outside the braces.
Thanks you,
Nili

I'm looking for a way to escape all characters (not only the minus sign) except for a specific character. Kind of like 'unescaping' a specific character (the '%' sign) within braces {}What about if you apply a function like regexp_replace to escape all known "specific characters", and then unescape the particular specific character again back as e.g. in
SQL> select 'a.da-df%df*' str, replace (
 regexp_replace (
 'a.da-df%df*',
 '([[:punct:]])',
 '\\\1'
 str2
from dual
STR STR2
a.da-df%df* a\.da\-df%df\*
1 row selected.i.e. don't escape with curly brackets but with the backslash character.
You can then use this string in your query like in
WHERE CONTAINS(r.POI_NAME, '<query> <textquery grammar="context"> <progression><seq>'
||'aaab'
||'</seq><seq>'
||'aaa\-b'
||'%</seq></progression> </textquery> </query> ' ,1)> 2

WiFi Network Name with Underscore Special Characters Issue

Turns out that iPod Touch doesn't like wireless network names with special characters (e.g. underscores) in them (I had 2 underscores in mine).
It will establish a connection, get an IP address, even use WEP but won't talk to the Internet if the wireless access point name has an underscore in it. If you can change your wireless network name to remove the special characters the iPod Touch becomes very and will connect using the Internet.

I'm looking for a way to escape all characters (not only the minus sign) except for a specific character. Kind of like 'unescaping' a specific character (the '%' sign) within braces {}What about if you apply a function like regexp_replace to escape all known "specific characters", and then unescape the particular specific character again back as e.g. in
SQL> select 'a.da-df%df*' str, replace (
 regexp_replace (
 'a.da-df%df*',
 '([[:punct:]])',
 '\\\1'
 str2
from dual
STR STR2
a.da-df%df* a\.da\-df%df\*
1 row selected.i.e. don't escape with curly brackets but with the backslash character.
You can then use this string in your query like in
WHERE CONTAINS(r.POI_NAME, '<query> <textquery grammar="context"> <progression><seq>'
||'aaab'
||'</seq><seq>'
||'aaa\-b'
||'%</seq></progression> </textquery> </query> ' ,1)> 2

Special characters issue with Nokia Maps on N95

Hi there,
when using Navigation in conjunction with Nokia Maps on my N95, all streets and towns which contain any special character in their name (for example: é, è, ü, ä, ö, etc…) do appear as unreadable garbage on the screen of the N95.
I only noticed the problem after having purchased the 3 years license Navigation upgrade (EUR 99.99) and immediately notified Nokia. That was back in October. Since then I have called them at least 10 times and ultimately I have asked for a refund as no solution is still available.
In all these calls with Nokia, the only reasonable argument I heard was that maybe (!!!) the new software update version 20.0.015 released back at the end of November could solve the issue. Unfortunately, for my phone (which is a branded one) the update is not yet available.
Today, after calling them again, I was told that Nokia’s policies do not foresee refunds and therefore my request has been rejected. I was told to bring my phone to a Nokia Store and see if they can help me (I don’t see how). I was also told that maybe I would have to send-in the phone for repair.
This is soooo frustrating that despite the 3 months of patience and all the money spent for the N95 (not quite cheap), the navigation upgrade and the phone calls to Nokia, I still have the same issue. I will probably end up filing a complaint with a monthly consumer’s magazine in the hope they will publish my story.
After all, it may not even be Nokia’s fault but rather the guys who are responsible for the maps, but if Nokia accepts to have a commercial venture with a vendor, than they also accept liability for the joint product. And by turning down my legitimate request for refund, they have proven not to give a **bleep** about people like you and me.
Forgive me for the long post - needed to release some of the frustration...

I have been using an N95-8GB since Nov.'07. From my experience with this phone that has a built-in mass memory besides the phone memory. I had trouble retrieving some of the softwares I have installed. For eg. I have saved some themes in the mass memory & I could not find it when I want to delete it. There are some 3rd parties games software inside where I cannot even delete
This is what I don't like about the phone. I have bought an N82/Black recently as it uses an external memory card.
Coming back to Nokia maps. Personnaly, I don't think they are that good & I have problem downloading it into my phone from my PC after having downloaded it from Nokia.
By the way the Nokia map is not even the latest map 2.0. Is still a 1.0
I used Navfone map software & it works OK in the 8GB. You have to purchase it.
I have used a couple of N-series phones in the past ie. N-90, N-70, N-71, N-73, N-80/Black, N95, N-95/8GB & now N-82.
Common with all N-series phones. After you have disconnected when you are done with your call you have to wait for a while before the word "disconnected" disappears.
The more features it has, the more problem you are gonna to encounter.
Unless you want to download softwares into your phone & have a good camera thats where the N series phones come in.
For normal usage, a 40 series phone will suffice.

XSLT transformation in XML to ABAP: special characters issue

Hi,
I am parsing well-formed XML file that has the following data (:
<projects><project><name>Wallis & Futuna</name></project></projects>
I use XSLT transformation:
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:sap="http://www.sap.com/sapxsl" version="1.0">
<xsl:strip-space elements="*"/>
<xsl:template match="projects">
 <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
 <PROJECTS>
 <xsl:for-each select="project">
 <PROJECT>
 <NAME>
 <xsl:value-of select="name"/>
 </NAME>
 </PROJECT>
 </xsl:for-each>
 </PROJECTS>
 </asx:values>
 </asx:abap>
</xsl:template>
</xsl:transform>
If I use the above example without &amp; everything works fine, but the original XML fails with exception CX_XSLT_DESERIALIZATION_ERROR and message "Error during deserialization". Googling around did not give an answer.
Any words of wisdom?
Edited by: Alexei Isaev on Apr 26, 2011 5:04 AM
Edited by: Alexei Isaev on Apr 26, 2011 5:05 AM

Hi,
Please visit the following link for reference.
http://help.sap.com/abapdocu_70/en/ABAPCALL_TRANSFORMATION.htm
Thanks & Regards,
Harish

Time-dependent Vendor Master & Handling Special Characters

Hi,
I need to extract time-dependent Vendor Master.
1. The data source for 0VENDOR does not have fields to hold the valid date range.
2. Does the Master data in R/3 for Vendors will hold the valid date range?
3. The text for 0VENDOR provides time-dependent, but how to map the valid from and valid to fields?
Handling Special Characters:
We are trying to extract data from Legacy system via DB Connect. The item text field consists of special characters. Of course in BW customization we can specify all the special characters to consider. But the special character we observed is 'square' symbol i.e. 'new line character' in Oracle. We are updating this to an ODS object. When looked at error log, observed that green light for the number of records transferred and updated, but finally when it load into ODS object and activates popping up the error message saying 'could not recognize special character'.
Please help me getting the 2 issues resolved.
Thanks in advance.
Regards,
Sudhakar.

Hi Everyone,
Thanks for inputs on Special characters issue...
Finally resolved with below piece of code in the start routine:
DATA: FLAG,
 OFF TYPE I,
 LEN TYPE I VALUE 1,
 ALLOWED_CHAR(95) VALUE
'0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ`~!@#$%^&*()-_=+ ' &
'abcdefghijklmnopqrstuvwxyz:;<>,.?/|\{}[]"'''.
CONSTANTS: C_CHAR VALUE '-'.
LOOP AT DATA_PACKAGE WHERE NOT /BIC/ZI_DESC IS INITIAL .
 DO.
 IF DATA_PACKAGE-/BIC/ZI_DESC CN ALLOWED_CHAR.
 REPLACE SECTION OFFSET SY-FDPOS LENGTH LEN OF
 DATA_PACKAGE-/BIC/ZI_DESC WITH C_CHAR.
 FLAG = SPACE.
 ELSE.
 FLAG = 'X'.
 ENDIF.
 IF FLAG = 'X'.
 EXIT.
 ENDIF.
 ENDDO.
 MODIFY DATA_PACKAGE.
ENDLOOP.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
I have seen the link sent by 'Eugene Khusainov' today. Thought putting my piece of code that may help others...
Regards,
Sudhakar.

Problems with special characters when exporting to LDAP

Hi,
Im using standard report RPLDAP_EXTRACT to export data to LDAP. The problem is that the special characters (in this case polish letters) do not save correctly (we get for instance '?' instead of normal letter)
I tried switching the configuration of the RFC destination (used: 'found communication Code Page option') but I get a message: "Your selection is restricted" and cannot make any changes.
Can anyone please help in this matter?
Regards,
Hubert

1) Your database should be able to handle and properly store all the supported charactersets needed. With UTF you are in the clear regarding storing all that kind off idfferent characters
See http://www.oracle.com/technology/tech/globalization/htdocs/nls_lang%20faq.htm
2) The recieving party (the cleint software) hopefully has a character set that supports all the characters that are offered by the database and can encode them. If not then you get toe upside down question markt or dark squares or something alike. If the client software is a browser, for instance windows internet explorer, then most encoding settings are buildin and you only have to switch. Sometimes you will have to add extra language support on Windows Internet Explorer. This behaviour is also the same on thick clients. Oracle by default sets these parameters in the registry, but on windows the can be overrulled on several levels like on system level, user level (start --> settings -- control panel --> system --> advanced tab --> environment settings) and or during execution via a app. configuration file or an export of the system variable on the command prompt... A unified business approach for how to handle this is needed otherwise you will have too look for these kinds off issues always all over the place (on windows and/or linux etc).
Have a look at Mark's example of how things work regarding UTF and the like on the FAQ URL on this forum and the URL as show above. If completely lost, you will have to read up on it in the Oracel globalization / NLS manuals and see what is appropriate / can be done in your environment.

Special characters an issue in reading email from server?

I have an email application that uses javamail 1.4.1 that grabs emails out of flat files and displays the messages on the screen. Until recently, all email was sent within the business, but now they are able to receive emails from any email provider. We've been seeing issues where parts of messages go missing, even links to attachments that don't get displayed to the screen. All of the correct information is in the flat files, but it doesn't get displayed. Does Javamail do anything to handle special characters or is there anything you think I could try to get these messages to display? It's really causing some problems!

As far as I can tell, it's not throwing any exceptions, the only ones I catch in retrieving emails are MessagingException, IOException, and IndexOutOfBoundsException, and I'm not seeing any errors in my log files. The headers are the only thing that come through correctly every time, it's always either the message or attachments that go missing. One of the messages is from a mobile phone, which could be a problem, but we've seen it from our company email addresses too. I'll see if I can get a hold of a sample message to post. In the meantime, what kinds of properties can be set? Is there a good place to look for that?
EDIT: here is a sample message (names have been changed to protect the innocent, also removed attachment encoding)
Return-Path: <[email protected]>
X-Original-To: [email protected]
Delivered-To: [email protected]
Received: from localhost (unknown [IP])
 by company.com (Postfix) with ESMTP id AA0FB52B4F0
 for <[email protected]>; Wed, 17 Dec 2008 12:27:00 +0000 (UTC)
Received: from company.com ([IP])
by localhost (HOST [IP]) (amavisd-new, port 10024)
with ESMTP id 02398-05 for <[email protected]>;
Wed, 17 Dec 2008 06:27:00 -0600 (CST)
Received: from fortimail (unknown [IPADDRESS])
 by company.com (Postfix) with ESMTP id 7EBC7178D95
 for <[email protected]>; Wed, 17 Dec 2008 06:27:00 -0600 (CST)
Received: from atlmtaow03.cingularme.com (atlmtaow03.cingularme.com [IPADDRESS])
 by fortimail with ESMTP id mBHCQvRG003014
 for <[email protected]>; Wed, 17 Dec 2008 06:26:58 -0600
X-Mms-MMS-Version: 18
Date: Wed, 17 Dec 2008 06:31:21 -0600
X-Nokia-Ag-Internal: ; smiltype=true; internaldate=1229517081559
Content-Type: multipart/mixed; boundary="----=_Part_11936491_5421953.1229517081567"
X-Mms-Delivery-Report: 1
Received: from schagw02 ([IPADDRESS]) by atlmtaow03.cingularme.com (InterMail vM.6.01.04.00 201-2131-118-20041027) with ESMTP id <20081217122656.MANG3081.atlmtaow03.cingularme.com@schagw02> for <[email protected]>; Wed, 17 Dec 2008 07:26:56 -0500
X-Mms-Transaction-ID: MMS0000084841772
From: <[email protected]>
To: [email protected]
X-Mms-Message-Class: 0
X-Mms-Read-Reply: 1
Mime-Version: 1.0
Message-ID: <3200553.1229517081568.JavaMail.wluser@schagw02>
X-Mms-Priority: 1
X-Mms-Message-Type: 0
Subject: Multimedia message
X-Nokia-Ag-Version: 2.0
X-Virus-Scanned: amavisd-new at location.company.com
------=_Part_11936491_5421953.1229517081567
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: base64
Content-ID: <slide1.txt>
Content-Location: slide1.txt
Content-Disposition: inline
TG9vawo=
------=_Part_11936491_5421953.1229517081567
Content-Type: image/jpeg
Content-Transfer-Encoding: base64
Content-ID: <1215082150-01.jpg>
Content-Location: 1215082150-01.jpg
Content-Disposition: inline
[Attachment encoding goes here]
------=_Part_11936491_5421953.1229517081567--
Edited by: jlapoint on Dec 22, 2008 9:22 AM

Orgchart export to image: special characters issue

Similar Messages

Maybe you are looking for