Image Ready Flash Tween Problem
I have created a SWF in Image Ready that previews correctly, but once uploaded the motion does not fade from one to screen to another - it is a cut. I previewed it in Firefox and Explorer. I am on XP.
I am on CS2 (I am cheap). Here is the current test link. http://operahousegourmet.com/index-hotflash2.htm Here is a link to the current page I made the same way. http://operahousegourmet.com/
Any help would be fantastic.
Thanks to all who read this - I finally figured it out.
At least how to resolve this one. The files were set up in groups with multiple layers. Image Ready/Dreamweaver was not having any of that. Once it got into Dreamweaver it ignored the tween commands. I created another PSD file and flattened all the layers. Tried again and exported as preserve appearance and lossless 32 with rasterized fonts and it works.
Similar Messages
-
Images corrupted. flash player problems.
I have just upgraded to Snow Leopard 10.6.5 and a number of things seem to have gone haywire.
Safari 5.0.3 (6533.19.4) is displaying many images in websites with corrupted parts - usually a line through the middle and some pixelation. As you can see, this isn't happening in Firefox.
http://twitpic.com/3e0ppx
http://twitpic.com/3e0pyv
At the same time Flash Player (latest version) is sometime working and sometimes not. YouTube won't play any videos (Flash error is Movie not loaded) directly but some embedded videos on other sites seem to work. But plenty of Flash based audio players are working fine. This is true for both Safari and Firefox
Also, Software Update will not work - says there's a network problem, when i'm still able to browse normally.
What I've done so far. Repaired permissions, used Techtool Deluxe (nil problems with drive), deinstalled and reinstalled Flash Player, fixed permissions again, deleted software update preference files, rebooted. All to no avail.
So... help!HI,
Login to another user account. Try Safari there. If you see the same behavior, boot from your install or Snow Leopard disc. Follow the instructions at this link where you see: *Try Disk Utility*
http://support.apple.com/kb/TS1417
I see that you ran TechTool to check the drive, but use Disk Utility from your install disc.
Whenever "Software Update" tells you there's a problem, use the Apple standalone downloads here instead. http://support.apple.com/downloads/
Something else to try is to delete the Flash cache, instructions here.
http://discussions.apple.com/thread.jspa?messageID=11672709�
Carolyn -
Animated .gif file correction and image ready help.
Hi,
I have an animated gif created in an early verison of Image Ready & Photoshop. I need to make some changes. I have two problems.
A: Can't figure how to do it in the current version of Photoshop.
B: Open in the old image ready version, can't find the Layers pallet. I turn it on and off and it doesn't appear.
Trying to recreate a rotating .gif file any pointers or how to's?
Thanks,
JohnYou didn't say which version of ImageReady, but cs5 should open
most animated gifs from ImageReady and show the frames in the
Window>Animation panel. Some may not work right depending on
how old the version of ImageReady was that created them.
(you may have to resave the animation in ImageReady as a psd file)
In ImageReady try Window>Workspace>Reset Palette Locations and the layers
palette should be visible.
In ImageReady, in the actions palette, are several actions to rotate (spin) images.
MTSTUNER -
Hi All image ready issue on an old photoshop 7 program
I am using photoshop 7 I know its an oldie but it works for me,whenever I try to jump to image ready I get the message could not fully start the application because an unknown error has ocurred,
I have been using the programs for some consideral time and never had any problems, until now. I have all the original discs packaging and key codes..... I have uninstalled and re installed I have plenty of memory but IR just wont open, Im sure this happened after an adobe update I cannot understand why if photoshop 7 continues to work fine and which is compatable with IR7 and came with the package just wont fire up. any ideas?This forum deals with Adobe Digital Editions, not Photoshop....
=========== -
How to make a link to an image in flash?
Hi,
I´m new in Flash CS3 and I´m trying to get some
answers to my problem.. The question is
that how do I create a link to an image in flash??
I know how to make a link to a text field but I really
don´t know how this could get working properly.. :/Link to an external URL image? In AS 2 the code is
'getURL("putaddresshere")' and in AS 3 it's 'navigateToURL("")' ...
If it's a simple image, it's easier just to import it to the
stage, save it as a symbol, put it in a timeline frame and then
code your link so on click or rollover it goes
'gotoAndPlay(framenumber)'. -
Tween problems in ActionScript 3.0
Hello!
I'm stuck with my problem and I have no idea what is wrong. I'm making movement of movie clip via creating new Tween in Action Script 3, Flash CS4 and it happens, when I mouse over button in another movie clip. The problem is that movement sometimes work perfectly, but sometimes it gets stuck in middle of movement and continues only if I mouse over again. Here is the code of function of first frame in main scene:
import fl.transitions.Tween;
import fl.transitions.easing.*;
function btnOver(I:Number) {
var tw: Tween = new Tween(somemovieclip, "x", Strong.easeOut, somemovieclip.x, I, 1, true);
Here is how I'm calling that function from another movie clip when I mouse over a button:
function over(eventObject:MouseEvent) {
(root as MovieClip).btnOver(288);
btn.addEventListener(MouseEvent.MOUSE_OVER, over);
I have several motions like this - for each button different variable for x position (number "I"). I also have another movie clip playing at the same time, but it isn't connected with any of movie clips mentioned above.
Does anybody have an idea what is wrong?
P.S.: I'm on Mac with latest flash player and movie works better in Windows - it has less mistakes, but still they happen very rare. Probably the problem is somewhere inside player or something like that?
Thanks!It looks like the problem is that you only have one Tween instance to work with. If you start one tween and start another before the first has completed, the first one has to stop working because that one Tween instance has to jump over to the new tween that's just been called.
You probably want to set up an individual tween for each button. You might also want to look into using something like TweenLite/TweenMax instead of the built in Flash tweening. Have a look at: http://blog.greensock.com/tweenmax/ -
I'm currently porting a game from flash to the DS and having
difficulties exporting the images and was hoping someone out there
might be able to help. The images in flash are all vector based and
I need to export them and place them on a background (colour
255,0,255). The reason for the background colour is it is removed
programmically within the game (blue screening if you will).
Problem is, if I export them as png's and then add the background
in photoshop, or do a screenshot in flash with the image over the
background then it leaves a halo around the character.
Anyone know how to get around this?
Take care,
S.Can you upload an example of the png or a visual of the halo
you are seeing? -
Cannot apply style to layers in Adobe iMage Ready CS2
Can anyone help? I am trying to create rollovers in Adobe Image Ready CS2 and then apply a style. In this case an inner shadow and bevel & emboss. I have done this in the past without any problems. I can apply the styles, but they do not show on the layers and when I save the rollovers you still can't see the styles that I have added. What am I doing wrong?
If anyone has an answer, I'd be most grateful to hear it!!!!
Many thanksThis is not an Acrobat question. Please repost in the Photoshop forum.
-
I have windows 8.1 recovery image in flash drive ,i want to burn the recovery in dvds
i have windows 8.1 recovery image in flash drive ,i want to burn the recovery in dvds.by mistake i deleted the partition drive which was on my computer ,please help me with this problem.
This question was solved.
View Solution.rohit1317 wrote:
i have windows 8.1 recovery image in flash drive ,i want to burn the recovery in dvds.by mistake i deleted the partition drive which was on my computer ,please help me with this problem.
Hi,
Unfortunately you can create only 1 set of recovery media.
Copying and burning the recovery USB to DVD and then using DVD to do system recovery will not work.
What you can do is back up all your data to an external drive. Do a Factory Reset with the Recovery USB to get back all the partitions including the recovery partition into the HDD.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP** -
Flash player problem after updating to belle on my...
flash player problem after updating to belle on my nokia c7.when I try to play .flv videos screen goes blank as show in image,previously these videos runs fine on symbian anna plz help plz help or tell me the way to downgrade to anna
Attachments:
scr000002.jpg 10 KB1) product code 059B7W0
2) software version 111.030.0609
3) it is actually stored .flv files on my phone workes fine on symbian anna
Attachments:
Scr000003.jpg 17 KB
Scr000004.jpg 15 KB -
Hi all,
Posted a question the other day and still no answer to solve my problem and it is driving me mad
I am trying to use an image created in Fireworks that has gradients in it (please see attached pic).
For some reason Flash makes the image look real bad. I have tried importing into Flash as a PNG and as a JPEG, it still looks dreadful.
I am now wondering if I can create a Flash document using 'transparency' as a background then import over the image on the website however from what I can see I cannot create a transparent stage that is transparent in Flash, it has to be a colour. Is this the case or am I missing something????
Please can someone give me some idea on how to overcome this.
I cant believe I can make an image in Fireworks that Flash can then not maintain the quality. Seems soooooooo simple but yet doesn't work.
HelppppppppppppppppppppppppppppppppppppHi Ned,
Thank you for sorting my other post out, good of you.
Not sure how to post a screen of what I see on here, will have a go.
I will also try your option imports however I am sure I have played and imported every way I can and it still isn't keeping the image clear.
If your able to import my image and it looks fine then I guess I 'must' be doing something wrong!
All I can say is it is like the resolution in Flash is not right. In Fireworks I can increase the resolution to make images better in quality, it seems in Flash I can't so the result, to me anyway, is that the imported image isn't clear.
When I import the image to Flash the beveled highlighted line is not clear, as it should be, it looks slightly out of focus. -
Help with image ready on ps3 extended
I am pretty new to photo shop and have cs3 extended.
I have a Yorkie website where I cut out my Yorkies and paste them to differnet backgrounds.... a lady that does the ANIMATED pictures HAS DID A COUPLE FOR ME ....BUT I NEED TO LEARN TO DO THIS MYSELF. She will not tell folks how to do:)
The problem is once you work with a pic that is animated already then try to add a dog.....by pasting....it removes the animation in the background pic.... and the picture no longer moves once the dog is added ?....She said she puts thru IMAGE READY...which I do not see anywhere on CS3 extended. I will try to insert a pic she did for me and any help would be greatly appreciated....as I can do but then the picture is no longer animated once altered in my photoshop but she is doing somehow.....so has to be poss ? If I were to do this pic it would stop moving once the dogs were added....plus not as good as her but practicing........could it be the fact she is doing in layers and I am doing copy and paste...I do know she puts thru Image ready and I do not know where this is located on cs3 extended or how to do?
amwell...........l when I try to open Gif with the import and chose the video frames to layers...am getting a message saying I need Quicktime 7.1 to be able to do??? and when selecting import that is the only option I have to open my animated picture?...YOU HAVE BEEN SO MUCH HELP! THANK YOU SO MUCH...!
BLUE MONDAY EXCLUSIVES
Date: Sat, 17 Apr 2010 20:23:27 -0600
From: [email protected]
To: [email protected]
Subject: Re: Help with image ready on ps3 extended
I'm not sure anyone mentioned this but if not to open GIFs using the import you have to enter the GIF name as GIF isn't listed as one of the options.
It sounds like you are viewing the images in a maximized screen mode. To view more than one document, press F to cycle through the screen modes. FYI, only the contents of the currently selected document can be viewed in the layers palette.
I'll just talk about copy/paste so as not to confuse...
If you are going to copy/paste, click the frame around the dog document to target it. Your layers palette will now contain the contents of the dog document. Click on the layer in the layers palette with the selected dog over transparency. With that layer highlighted in your layers palette, press Ctrl A; then Ctrl C. (Select<Select All; Edit<copy if you prefer using the menu.) This will copy that layer into your clipboard.
Next, click the frame of the document containing the animation. Click the topmost layer in the layers palette because we want you dog to be in the top layer. Press Ctrl + V. (Edit<Paste if you prefer using the menu).
Your dog is most likely going to be too big. Use Edit<Free Transform to size and move the dog to the desired location.
At this point, your dog should be showing in each frame in the animation palette.
Example:
http://forums.adobe.com/servlet/JiveServlet/downloadImage/25315/with-palettes-open.jpg
I'm using the older Image Ready me method. The highlighted place in the palette is where you switch methods between the old method and the new timeline. Notice, I have the layers and animation palette both in the workspace...and I'm not in a maximized mode. The red arrow shows the correlation between the frame and the layer represented by it in the layers palette.
Image:second-image.jpg
Here I have a second image to slip into my animation. I have the creature selected and on it's own layer with transparency around it. Notice that the the layer with the isolated creature is highlighted. At this stage, I'll press Ctrl + A; then Ctrl + C to select and save this image to my clipboard.
Image:creature-added.jpg
Here, I've pasted (Ctrl + V or Edit<Paste) in my creature and resized it (Ctrl + T or Edit<free transform) so he can be jumped. I also added a shadow under my creature which I added to a layer under my creature. Notice that when Frame on is selected in the animation palette that the eye is on both the creature and the shadow. If I click the eye to turn them (creature and shadow layer) off, they disappear from the entire animation. I can make them appear at any frame by clicking the desired frame in the animation then turning on the eye icon for the creature and shadow layer in the layers palette. I can also adjust opacity if desired.
You could even more than the one image if you want the dog to appear to move. Use the eyeball visibility to determine which pose will be used for that frame.
Example:
Image:jump-creature-gif.gif
Here, I used transform warp to adjust the pose of the creature for a few frames as he's jumping the creature...just for fun.
> -
Dreamweaver CS3 Image Viewer Flash Element
Here at Cleveland State University, I offer basic training
classes for most Adobe products. We are in the middle of a complete
overhaul of the
http://www.csuohio.edu space. Our
goal to is to create an attractive, website with a consistent look
and feel that makes it easier for our faculty and staff to update
on a more frequent basis. In doing so, we have created a series of
pages that can be easily edited in Dreamweaver CS3. One item we
would like to fully support is the DW CS3 Image Viewer - Flash
Element. However, we have hit a small layout snag.
On the main pages of most college and departmental sites, a
specific space with a finite size is set on a web page for the
image viewer. A site editor then creates images in Photoshop that
are that exact size. The image viewer element is configured to be
that exact size as well. Furthermore, the picture "frame", title,
caption and controls are hidden in the Flesh Element panel.
However, when the page is previewed either in Dreamweaver or in a
browser, the images have been shrunk. There is always a border,
whether it is white or some other color. I assume the color is the
stage color of the Flash .swf file. This causes a misalignment of
the images and the other text.
Another issue is the links that automatically created. Some
of our editors have asked me why, even though they specifically
leave the imageLinks area blank, links seem to be created pointing
to the Adobe.com website.
My questions: is there no way to force the Flash element to
respect the size of the pictures so that no border is showing? Is
there no way to leave the Im
I've done a search on the Adobe.com support site and on the
web and noted that several people have posted questions concerning
this. Unfortunately, no one seems to know what to do about it.
I can send links if you would like to see an example. I'd
greatly appreciate any help you can give me.>I sent a message directly to Murray - one of the Adobe
techs that has been
>on
> the forum several times.
I'm just a user, like you. And I'd rather you not send things
directly to
me unless I request you to do this. If you have a problem
that cannot be
solved here, then your next option would be to contact Adobe
Tech Support
directly. I'm not very familiar with the Flash side of DW, so
I cannot be
of much help in this regard.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"pixelfixer" <[email protected]> wrote in
message
news:g0i4ih$r8t$[email protected]..
>I sent a message directly to Murray - one of the Adobe
techs that has been
>on
> the forum several times. I'm hoping he has a solution. I
can't believe
> Adobe
> hasn't fixed this one yet. It's been out there for a
long time it
> appears.
> Allwebco has an image viewer as well that I'm working
with and having
> similar
> results. So, I don't know what to think at this time.
I'm going to try
> to
> work with their tech support today.
>
> Steve
>
> -
Creating multiple links from one map image in Flash CS4
I have been tasked with creating multiple links from one map image using flash. Each link would go to the main website page with that location. I assume I could create a button for each location on the map but not having a lot of experience any help / tutorial you know of would be super helpful.. Thanks! Not looking for someone to work me thru it but a little guidance would be great!
If I was to answer the problem, I would be giving you what you asked not to be given... the solution. So I'll suggest that you start by researching the getURL() function. That is what AS2 uses for opening web pages.
As for coding a button, I'll recommend the following article for you... it will explain the proper approach to coding a button, which will give you an advantage over others who don't follow it, but instead use the way the article says not to.
http://www.adobe.com/devnet/flash/articles/as_bestpractices_04.html
Google is one of the best resources available for learning how to do things with Flash--it's the first place I go when I have a wondering. In general, if you type in the right keywords, you get fairly good search results. In your case, combinations of "AS2", "button", "getURL", "tutorial" would probably work well. -
How to place a still image for Flash Player for a website
Hello,
I have CS3 suite and am using Dreamweaver and Flash for a new project. I am working on a website and would like to have small flash movies on several different pages. I would like to know how to get a still image in flash player before the user clicks the movie so that they will not see a black box on the pages before and after they click the movie. Any help would be appreciated. Thanks.Hi, You can go to this test site to see if you have Flash Player Installed on your 10.6.5 Mac.
http://www.adobe.com/software/flash/about/
Then this link has info on how to Uninstall Flash Player (if needed) and Install the latest version. It is a step by step.
http://kb2.adobe.com/cps/865/cpsid_86551.html
After reading that info and you just need to Install, then this link would be easier:
http://www.adobe.com/products/flashplayer/fp_distribution3.html
Flash Player is a browser plugin and as long as your browser is supported by Adobe Flash Player, then you shouldn't have any problem.
Hope that helps,
eidnolb
Maybe you are looking for
-
Was the amount of free accounts activated in this iPhone, as to proceed?
Was the amount of free accounts activated in this iPhone, as to proceed?
-
Using a Cube (remember those?) as an external drive
Okay, please don't laugh -- I inherited a Mac Cube with what I think are all the cables (power supply, power cord, firewire) and I'd like to explore the possibility of using it as an external drive. However, when I connected it to my G4 laptop via fi
-
All those printers & Epson not showing up
I have a two questions. First, I my Epson 2200 does not show up in the drop-down menu under Printer Description from Quark, but I can print to this printer using HP 2200. What do I need to do to make this show up? I'm trying to print a 13x19 sheet fr
-
Tabular Material consumption with batch char info in PI Sheet
Hi, I am currently creating PI sheet for blending in a mining company. We blend several coal with some grade to get the grade we obtain. coal with different grade maintain in different material with classification, not in batch classification In PI s
-
when i try to access itunes store..i get a message saying 'cannot connect to itunes store..PLEASE HELP!!!