Image Resize into thumbnail

How to resize a big image (uploaded images) into a thumbnail
(size wise as well) on a run time...

I use
cfx_image quite a
lot. The IML commands are very powerful, but best of all its free.

Similar Messages

How do you paste an image into a rectangular marqee forcing it to resize into the marqee?

How do you paste an image into a rectangular marqee forcing it to resize into the marqee?

Not sure this would address your issue, but the Crop Tool works that way: set the width and height, plus resolution, and Crop does everything. You could then paste the result into another file if that completes your process.

Slideshow image resizing when adding new images

I am creating a series of slideshows on multiple pages. I created one slide show using the "basic" slideshow and resized it to the dimensions and settings I wanted. I have many pictures all of different proportion, therefore, I selected the "fill frame proportionally" so they would all fit the dimension I set. I wanted to use this first slideshow as a template for all of the rest. I added images to this first slideshow with no problems. All of my different sized images scaled or cropped to fit within the dimension I set. The problem comes in when I do two things: 1) When I add other images of different dimensions to this same slideshow gallery, they come smaller that the intended dimensions I set previous. I check the setting and it is still on "fill frame proportionally" similar to the first batch of pictures. 2) The second issue is when copy this slideshow as a template to other pages. When I try to replace or add to the slideshow gallery, the images come in cropped or smaller rather than filling the frame. Again, the settings are still the same from my very first slideshow that worked just as i intended.
I could resize all the images to all the same dimensions using another program like photoshop, but that is another step that is very tedious and it would seem that it should be something built into Muse.
Is there a way around this?. Am I doing something wrong? Or is this just one of those glitches that happens with Muse? I appreciate any help that I can get.
Thanks!

Hi, I got it to work like this:
Using background colours in Photoshop so that all sizes are the same in pixels. Then manually adjusting thumbnails by double-clicking on them so that a red square appears.
Cheers,
Elsemiek
Op 26 dec. 2014, om 00:50 heeft MediaGraphics <[email protected]> het volgende geschreven:
slideshow image resizing when adding new images
created by MediaGraphics <https://forums.adobe.com/people/MediaGraphics> in Adobe Muse Bugs - View the full discussion <https://forums.adobe.com/message/7043933#7043933>
Hi there Elsemiekagain,
I had to fiddle around with my slide show to get it to work. That is, it worked at first, then went funky, and I had to fiddle. So much fiddling that I can't possibly know what actually made it start to work again.
And to some degree, this is the way that I find Muse to be in general. That it requires finessing to get it to work as expected. This adds a good deal of time to every development project, though I am getting better at this with practice and experience.
Most of it is not even things that could be easily put in words as instructions, as many are nanced. But in fairness, this version of Muse is a complete code re-write this year. So we do need to cut Adobe some slack, and give the team time to iron things out.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7043933#7043933 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7043933#7043933
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Muse Bugs by email <mailto:[email protected]ftware.com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 59>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

Can't Resize a Thumbnail?

...and isn't that what I'm supposed to be able to do with the "Thumbnail" slider in the Button Info pane?
If I drag an image into the little "Custom thumbnail" zone just below that slider, it immediately appears both there and inside the button on my main menu. Moving the "Size" slider located just below that magnifies or reduces the entire menu button, but has no effect on the size of the thumbnail WITHIN the button itself.
But moving the Thumbnail slider doesn't seem to do anything -- unless I slide too far to the left and the image suddenly goes to black, or too far to the right and the image is suddenly replaced by a generic folder icon.
Have tested with several different images of different sizes and proportions, and the results are always the same. Which makes me wonder:
1) Is there in fact any way to resize a thumbnail which has been dropped into that "Custom thumbnail" spot (relative to the menu button in which it now appears)?
and
2) If not (aside from that being an obvious Feature Request), then what the heck is that "Thumbnail" slider control in the Button Info pane (and which also appears on its own when you just select the menu button into which the image is now being displayed) supposed to be for?
This is the last thing I need to set before burning, so any suggestions would be welcome!
Thanks,
JB
P.S. -- just noticed that when I move that slider control -- even though nothing appears to change on screen (and regardless of whether I'm looking at the menu with the motion on or off), the Undo info under the File menu refers to "Set Button Thumbnail Time". But I still don't get it, since I only seem to be able to drag a single image into the "Custom thumbnail" zone, and the Thumbnail slider control still appears to do nothing useful. Yet it must be there for a reason?

The + sign is usually associated with a Text Box that is not big enough to see all the text. It will show up even if there is just an extra return, so you may be able to see all your text but added an extra return in there and that is causing the text box to think there is something you can't see. You can ungroup everything and select the text box and make it bigger and click at the bottom to see if there are extra lines you can delete.
Then if you want to be able to resize everything, including text, at once, select the grouped item, open Preview and get a New From Clipboard (command n or File>New From Clipboard). Copy this and paste back into Keynote. You will not be able to change the text, but it will resize with the image.

Advanced image resize

I hope someone can help me with this.
Working on a e-commerce site for a client, and they gave me around 2000 large sized pictures.
I need to generate a standard size image and a thumbnail image for each product. But here's the tricky part. They're all in their own directories i.e. (brand/product/xlarge/main01.jpg).
Is there a way i could use automator or even another tool, to resize the pictures and put them into their own directory? i.e. (brand/product/standard/main01.jpg)
Thanks in advanced.

Look at these links. Some of the apps may do what you want.
Resizing Photos for Emailing
http://www.apple.com/pro/tips/emailresize.html
Resize!
http://kstudio.net/
PhotoToolCM
http://www.pixture.com/software/macosx.php
SmallImage
http://www.iconus.ch/fabien/smallimage2/
ImageTool
http://www.macupdate.com/info.php/id/23281
ImageWell
http://www.xtralean.com/IWOverview.html
Resize JPEG Files
http://www.macworld.com/weblogs/macgems/2006/09/jpegresize/index.php
 Cheers, Tom

Ways to implement image resizing using plug-ins?

Hi Photoshop developers,
I'm a developer with a few Photoshop filter and selection plug-ins under my belt, and I have a good understanding of the SDK and tools and suites it provides. My next project is an algorithm for enlarging/resampling images to different pixel dimensions. I'm wondering if anyone has any suggestions for or experience with the best combination of plug-in types to implement this.
Clearly, I can't just write it as a filter plug-in, since there is no way to change the image dimensions from within a filter.
I'd like the resized image to remain within Photoshop (as a new window or in the original one), so an export plug-in on its own is not sufficient.
Import plug-ins seem promising, since they allow the creation of a new document of the required size. However, as best I can tell from the Photoshop 6.0 SDK documentation, import plug-ins cannot access the image data from other open documents (or even the clipboard), nor do they provide any support for channel ports and the Channel Port suite.
My best idea at this stage is to create an export plug-in to provide the user interface and calculate the resized image, and then an import plug-in to import the resized image back into a new window. (I'm supposing a further automation plug-in would then be written to perform this export/import sequence.) The difficulty I see with this approach is how to communicate the resized image data between the two plug-ins. Since the resized image will potentially be very large, the ideal solution would be to store it in channels managed by the Channel Ports suite. However, I cannot see how the channel ports created in the export plug-in could be communicated to and used by an import plug-in. The alternative would be for the export plug-in to save the resized image to a temporary file on disk, however this seems unnecessary.
So, my questions, specifically, are:
a) Is it possible to create new channels using the Channel Ports suite (sPSChannelPorts->New()) in one plug-in, and have those channels persist to be used in another plug-in?
b) If so, how would the channel ports be communicated between the plug-ins?
c) Alternately, are there any alternative architectures available for implementing an image-resizing algorithm using the plug-in types that are available for Photoshop developers.
Any responses would be greatly appreciated; I know this is a low-traffic forum...
Thanks,
Matthew.

I would make an automation plug-in and a filter plug-in. 1) Run the automation which runs your filter to gather current image information 2) Create a temp file of the new document 3) Make a new document 4) Call the filter again to reload the temp data on disk <[email protected]> wrote in message news:[email protected]... > Hi Photoshop developers, > > I'm a developer with a few Photoshop filter and selection plug-ins under > my belt, and I have a good understanding of the SDK and tools and suites > it provides. My next project is an algorithm for enlarging/resampling > images to different pixel dimensions. I'm wondering if anyone has any > suggestions for or experience with the best combination of plug-in types > to implement this. > > Clearly, I can't just write it as a filter plug-in, since there is no way > to change the image dimensions from within a filter. > > I'd like the resized image to remain within Photoshop (as a new window or > in the original one), so an export plug-in on its own is not sufficient. > > Import plug-ins seem promising, since they allow the creation of a new > document of the required size. However, as best I can tell from the > Photoshop 6.0 SDK documentation, import plug-ins cannot access the image > data from other open documents (or even the clipboard), nor do they > provide any support for channel ports and the Channel Port suite. > > My best idea at this stage is to create an export plug-in to provide the > user interface and calculate the resized image, and then an import plug-in > to import the resized image back into a new window. (I'm supposing a > further automation plug-in would then be written to perform this > export/import sequence.) The difficulty I see with this approach is how to > communicate the resized image data between the two plug-ins. Since the > resized image will potentially be very large, the ideal solution would be > to store it in channels managed by the Channel Ports suite. However, I > cannot see how the channel ports created in the export plug-in could be > communicated to and used by an import plug-in. The alternative would be > for the export plug-in to save the resized image to a temporary file on > disk, however this seems unnecessary. > > So, my questions, specifically, are: > > a) Is it possible to create new channels using the Channel Ports suite > (sPSChannelPorts->New()) in one plug-in, and have those channels persist > to be used in another plug-in? > > b) If so, how would the channel ports be communicated between the > plug-ins? > > c) Alternately, are there any alternative architectures available for > implementing an image-resizing algorithm using the plug-in types that are > available for Photoshop developers. > > Any responses would be greatly appreciated; I know this is a low-traffic > forum... > > Thanks, > Matthew.

Images as Buttons and Image Resizing in mxml

Sorry for all the questions but I've run into a problem when trying to create buttons that are just an image in mxml. When I first tried this I couldn't find a way to get the border around the button to dissapear so it ended up looking like my image had an extra black border around it. Then someone here suggested I just set the buttonMode property of an mx:Image to true which ended up working fine to a point. The problem I'm having is that even if I make the tabEnabled property of the image (that I'm using as a button) true, I can't tab over to it. Is there a way to either get rid of the black borders of a button or to make it so I can tab over to an image I'm using as a button?
My second question has to do with image resizing. Lets say I have an image of a horizontal line that I want to put at the top of the mxml page, and I want it to extend the full length of the page, even after the user has resized the browser. Is there a way to do that? I've tried putting the width as 100% or giving the image a "left" and "right" value so that presumably it would be stretched to fit within those but nothing has worked so far. Is there no way to do this or am I doing something wrong?
Thank you for any help you guys can give.

Of course, sorry about that. So the following is a barebones example of how I currently implement buttons and images as buttons:
<mx:Button id="facebookButton" icon="@Embed(source='image.png')" width="30"/>
<mx:Image buttonMode="true" id="button" source="anotherimage.png" enabled="true" click="{foo()}"/>
And within the image I've tried making the tabFocusEnabled property true but to no avail.
The following is how I've tried stretching out an image across the whole page:
<mx:Image source="yetanotherimage.png" width="100%" scaleContent="true"/>
<mx:Image source="yetanotherimage.png" left="10" right="10" scaleContent="true"/>
Is this more helpful?

Permissions issue with image resize

Ok I'm hoping someone may be able to help with this because it is really frustrating.
I realise this issue has already been posted in these forums however there was no solution offered that has rectified it for me. I am getting an error when trying to display thumbnails "Error converting image (create thumbnail). The "" folder has no write permissions". And this error when trying to upload and resize images "Image upload error. Error resizing image: Error converting image (image resize). The "" folder has no write permissions. (IMG_RESIZE)". All folders on server have full read, write and execute permissions, so I am really confused why this happenning. I have removed and updated the includes folder on the server with no joy. I altered the tNG_custom.class.php, tNG_insert.class.php, tNG_update.class.php files to remove the tNG_fields line to just tNG as this was throwing errors with PHP5.3. I also changed everything else per http://forums.adobe.com/message/2357443#2357443.
This is the tNG execution trace (why the tNGUNKNOWN??):-
tNGUNKNOWN.executeTransaction
STARTER.Trigger_Default_Starter
tNGUNKNOWN.doTransaction
BEFORE.Trigger_Default_FormValidation
BEFORE.Trigger_CheckForbiddenWords
tNG_insert.prepareSQL
tNGUNKNOWN.executeTransaction - execute sql
tNG_insert.postExecuteSql
AFTER.Trigger_ImageUploadtNGUNKNOWN.afterUpdateField - DefaultPic, P8280176.JPG*
ERROR.Trigger_LinkTransactionstNGUNKNOWN.doTransaction
tNGUNKNOWN.executeTransaction
tNGUNKNOWN.getRecordset
tNGUNKNOWN.getFakeRsArr
tNG_insert.getLocalRecordset
tNGUNKNOWN.getFakeRecordset
tNGUNKNOWN.getFakeRecordset
tNGUNKNOWN.getRecordset
tNGUNKNOWN.getFakeRsArr
tNG_insert.getLocalRecordset
tNGUNKNOWN.getFakeRecordset
tNGUNKNOWN.getFakeRecordset
And is causing the following php warnings when executed:-
Warning: Parameter 2 to Trigger_Default_FormValidation() expected to be a reference, value given /testing/includes/tng/tNG.class.php on line 228 Warning: preg_split(): No ending matching delimiter ']' found in /testing/includes/common/lib/image/KT_Image.class.php on line 2034 Warning: array_pop() expects parameter 1 to be array, boolean given in /testing/includes/common/lib/image/KT_Image.class.php on line 2035 Warning: implode(): Invalid arguments passed in /testing/includes/common/lib/image/KT_Image.class.php on line 203
Is it the preg_split() that is causing the issues here??
Any Ideas?

Hello BoarderLineLtd
I have noticed that on some servers when you upload the first image to the images folder using the ADDT image upload function the thumbnail directory that gets written to the images directory is written but the permissions are not set.
If you use an FTP program such as CuteFTP or WSFTP to login to your web site you can manually set the permissions for the thumbnail directory.
This should eliminate the permissions error.
Stan Forrest
Senior Web Developer
Digital Magic Show

Batch Psd image conversion into jpegs in pse 10 or 11?

I want to batch convert some .psd images into jpegs in pse 10 or 11. I know you can batch convert for image resizing,but don"t see the ability to convert images from one format into another. Thanks!!

Unfortunately, you have posted to the Photoshopn (PsE's big-brother) General Discussions Forum. There is a very good, and active Ps Elements Forum, where your question will be answered. I will Move your thread to the Ps Elements Forum, and your link, plus any e-mail subscriptions will follow.
Good luck,
Hunt
[Moved to Photoshop Elements Forum]

Image-resize servlet

Hi,
I�ve been working on an image-resizing servlet on and off for quite some time now, and I just cant seem to get it to load the image correctly.
I guess its very simple once you figure it out. The following is the interesting part:
Image image = Toolkit.getDefaultToolkit().getImage("../pictures/pic" + pictureId + ".jpg");
MediaTracker tracker = new MediaTracker( new JFrame() );
tracker.addImage(image, 1);
// Load image
try {
tracker.waitForAll();
} catch (InterruptedException e) {}
// Scale image
image = image.getScaledInstance(width, height, Image.SCALE_DEFAULT);I then copy the Graphics from the Image to another Graphics before it is sent to the client (have some cache-stuff going on in the middle), but all images turn out beeing plain black.
Anyone with ideas/sample code?

hi flaperman
i did something similar in my resizing servlet:
BufferedImage image = ImageIO.read(new File(path));
Image im = image.getScaledInstance(width, height, Image.SCALE_FAST);
BufferedImage thumbnail = toBufferedImage(im);
ImageIO.write(thumbnail, "jpeg", response.getOutputStream());
i found the code of the method toBufferedImage() on the following page http://developers.sun.com/solaris/tech_topics/java/articles/awt.html
maybe this will help you. but i'm afraid it is slow and it seems to be leaking memory (a lot).
cheers

Image Resize Menu not available

According to Mail Help, when I insert an image into an email, there is supposed to be an image resize menu in the lower right portion of the window and a message size indicator in the lower left of the window. Neither of these are appearing for me. I have tried attaching an image in a number of different ways with the "insert attachment at end of message" both on and off. Any ideas out there?

I've got the same problem. It only occurred after upgrading to Leopard.
Before it worked fine. (Leopard is for me not a success on this moment: my pages just stopped working, can't connect via bleutooth to my phone anymore using addressbook, eyeTV also stops at random and restarts are occurring often. I'm starting to get that 'trow this stupid thing out the window' feeling i had during my MS windows era.

LR3-Library-Export-Image Resizing: Specifying Pixel WxH results in different WxH - tips please?

This is a multi-dimensional question (he he). I understand my problem is related to the original/developed WxH ratio. If the pixel WxH I spec in Export-Image Resizing doesn't match that developed proportion, the results are not what I want. In other words LR3 keeps the original/developed proportion and not what I want for that export. Ok, so I just answered my own question - but..... please give me some library or export tips for doing what I want to do.
What I do:
1 - I edit my images in RAW and like to keep them in their original proportions from my Canon camera as that is the proportion of HxW i use the most
2 - Later, if the image is really good (at least I like it), I may export it for different purposes and then may choose or require a different proportion.
3 - I would really like to not have to re-crop in Develop, then go back and Export, then go back to Develop and change it back to original.
Besides being tedious and time consuming, can anyone recommend a better way for me to do these "one off" exports (seems to happen more often lately) without screwing around in Develop and messing up my original work?
Background:
One of the reasons I do this is to create wallpapers for computers, for various printing/framing proportions, and then for web site situations. Windows XP (and I think the others) gets really slow if the program must re-size an image for wallpaper (why? go ask Mr. Gates... better get in line). So to keep performance high, it is best to create the image in the exact pixel dimensions of the monitor. This is always some weird number and not like anything else I do this for. The other reason is for a quick, custom print job for someone who wants an odd matting setup for framing (don't ask). This results in odd proportions. Regarding the web.... well smooshing a pic into a column etc. etc... Now while I am proud of my art and understand LR3 will expect me to re-crop to preserve my artistic brilliance, but really..... I would be happy with a proportional crop from the parallel sides of the offending dimension.
Also, when I spec a dimension, shouldn't the DPI gray out? What am not understanding here?
One last request: please give me tips on solving for world peace... this one really bugs me.
Thanx in advance!

Bruce,
As you correctly noticed, the WxH ratio in export represents a canvas, into which the exported image is fit. Here are some illustrations on what the different settings mean:
For what you are trying to achieve, you have to crop the image to the correct dimensions before doing the export. If I had to do it, I would create virtual copies of the original image as the last step and give each virtual copy its own crop, then export the virtual copies.
Bruce in Philly wrote:
Also, when I spec a dimension, shouldn't the DPI gray out? What am not understanding here?
The DPI resolution has no meaning for the size of the resulting image if you specify pixels in your export dimensions. But the resolution tag is written into the image, which might affect the way an image is printed, depending on the printing application.
But if you specify your export dimensions in inches or cm, the resolution together with the dimensions in inch/cm determine the size of the resulting image in pixels. I.e. if you specify 5x7" and 300DPI, your exported images size will be 1500x2100 pixels.
Beat

Batch image resizing

Hi,
Can anyone tell me what the limits on the image resizing in Photoshop is. I need to run a regular batch of image resizing on about 38,000+ images (quiet a lot). I've also been looking around for a tool that can handle this number of images to resize, does anyone know if Adobe has such a tool?
Thanks
Stephen

I don't think there is an easy answer for you, if the files are on a server then there could be horrendous problems. You might need a custom script that breaks the batch into chunks and controled by Bridge.
Scripting expert Xbytor, has written scripts for people that does this sort of batch processing over at PS-Scripts.com, he may be able to help.

Converting an image to a Thumbnail

Is there a way, using the ORDSYS.ORDIMAGE datatype, to copy an image into a thumbnail during a bulk load, and load both the original image AND the thumbnail into the database at the same time?
Thanks.

I guess I understand a little better.
I would use PL/SQL if I were you since it is more flexible, and for images there is not a noticable perfomance between the two.
I don't know why you would want a trigger. The general PL/SQL procedure used in most of these cases:
Start
For every row to be inserted
Load data and image into row.
Use processCopy to create thumbnail from original image.
commit
end for;
end;
You would not need a procedure that first creates the rows and then creates the thumbnails.
Since there is are restrictions on using new LOB contents in a trigger, I doubt a trigger would work.
see:
http://otn.oracle.com/sample_code/products/intermedia/htdocs/avi_bulk_loading.html
You can take the load example and add code to create the thumbnail at the same tim ethe image is created.
If the same thumbnail may be used in different tables, you can have it stored in one lob and out the same lob locator in different tables.
Larry

Cold Fusion Image Resize

Does someone know a function or tag in Cold Fusion to resize
images. I need to place a table of thumbnails on the web page.
After clicking on a thumbnail, the larger equivalent of the image
needs to be loaded. The problem, so far, is to dinamically scale
down images to a thumbnail size and output them.
Any help is appreciated.

YAHA1,
These links might help. Or just search the forums for
"thumbnail" or google for "ColdFusion+Image+thumbnail"
http://www.bpurcell.org/viewcontent.cfm?contentID=126
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=1&catid=7&threadid=12 48691
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=1&catid=3&threadid=12 50309

Image Resize into thumbnail

Similar Messages

Maybe you are looking for