Images in RTF file do not display in WordPad
I inserted some images into a flowdocument, then save it as a rtf file.
Image photo = new Image();
BitmapImage photoFile = new BitmapImage();
photoFile.BeginInit();
photoFile.UriSource = new Uri("image.bmp", UriKind.Relative);
photoFile.EndInit();
photo.Source =photoFile;
Paragraph pPhoto = new Paragraph();
pPhoto.Inlines.Add(photo);
flowdoc.Blocks.Add(pPhoto);
When I open the rtf file with wordpad, all the images are lost. But they can be displayed in Word.
Why does that happen?
Thx.
WordPad (at least version 6.1 on W7) cannot display linked images, MSWord can. WordPad
can display embedded images. But the format seems to be some uncompressed WindowsMetaFile8 format, which may increase the storage footprint, compared to eg. PNG graphics, drastically. (Open a Wordpad RTF in Notepad, you'll see...)
A cross-check against the DotNET 1.1 RTF control shows the same as in Wordpad, linked images do not show up. That leads to the assumption that Windows Forms as well as Wordpad are based on the Windows Common RTF Control, and that control seems
not to support linked images.
I'm not quite sure yet, but WPF converts RTF content to XAML (which is very similar to HTML), so it does not rely on the Windows RTF common control, thus linked images in RTF are not a problem there.
HTH
Ulrich
Similar Messages
-
In FireFox 4.0, PDF files will not display
After updating to 4.0, PDF files will not display in the browser window as before. All I get is blank screen. Everything works fine in IE9. I have updated all the plug-ins, including Adobe Acrobat. Also have enable Display PDF in browser in Acrobat Reader.
If images are missing then check that you aren't blocking images from some domains.
You can use these steps to check if images are blocked:
* Open the web page that has the images missing in a browser tab.
* Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
* Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
* Go to the <i>Media</i> tab of the "Tools > Page Info" window.
* Select the first image link and scroll down through the list with the Down arrow key.
* If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
See also:
* http://kb.mozillazine.org/Images_or_animations_do_not_load -
Some PDF files are not displayed in Bridge
Hello,
here is the problem: I use Adobe Bridge CS2 to browse my large collection of PDF files, and unfortunately some files are not displayed in the Filmstrip View mode; instead a generic icon is shown (bridge1.png). Most PDF files, however, are displayed correctly (bridge2.png). Is this the problem of Bridge or of certain PDF files, and how should I fix them to make them being displayed by Bridge?
Thanks.curt y
In fact, all files have similar type of content (research papers). However, I found out that all files which are not displayed are "protected" by the publisher such that they only can be viewed and printed, but not modified or disassembled. Apparently, this causes the problem with Bridge not displaying them. It's a pity that Bridge cannot handle them...
Thanks for the help, though. -
Adobe PDF files will not display when called via a link in page (FF 4.01)
adobe PDF files will not display when called via a link in page.
This happens when testing new web page from DWeaver CS5 - all other browser tests are OK (IE9, Safari5.05, Chrome etc.)[moved to the Adobe Reader (desktop) forum]
-
Flash Files Will Not Display in Dreamweaver
Flash files will not display in Dreamweaver or in any
browser. If I insert a Flash button, text or other file, when I hit
the "play" button the flash place holder disapears, and the Flash
file never displays. In the Property Inspector, the file is always
"undefined" even when I save the file to my root folder with a
name. When I hit the "Edit" button, I get the message that the file
could not be found on my local disk. It's like Dreamweaver fails to
create or place a Flash file. Help please!fro:
> <img
>
src="file:///Alan's/Users/alanwhelpley/Desktop/MM_DWCS3/Chapter11/Roses.jpg"
You will have to rename the hard drive for dreamweaver to
work properly.
The ' is causing dw to not find the path.
other symptoms would be dw nagging that the "homepage" is not
within the
local site folder so it can't build a sitemap.
technote-
http://kb.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_14452
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/ -
CF8 - pdf files do not display in a browser
We are setting up the multiple instance capability using jrn4 with cf8,
with apache 2.x on Redhat linux 5.X.
For the when browsing to the main cfusion instance I can see pdf files
but if I go to the document root of an instance, pdf files are not displayed.
Infact it hoses whichever browser you are using.
I can see cfm, txt, html files.
Anyone have an idea what is happening?
paulwI tried your recommendation of turning off coldfusion and it
appears the problem of not being able to display
a pdf file has nothing to do with coldfusion or with apache.
The problem appears to be how we are mounting the documentroot on a linux server
from a windows file server using a cifs mount.
It seems to handle text files properly but not pdf files (it may have problems
with other types of files), perhaps it is an issue with end of line or end of
file which is confusing things.
This is the mount command we are using
//win_file_server/xyz /data/xyz cifs user,ro,credentials=credentials,uid=48,gid=48,file_mode=0755,dir_mode=0755
The credentials file contains
username=some_name
password=xxxxxxxx
uid=apache
gid=apache
filemode=0660
dirmode=0770
nosuid
nosetuids
It works file if the documentroot is on a mounted unix file system, but not windows.
Does anyone know if mounting a windows file system can work properly?
(Perhaps we are missing some additional settings).
paulw -
HT2493 How to change preview image of a file and NOT the icon ?
Hello dear Mac users
How to change preview image of a file and NOT the icon ?
I know how to change the icon of a file, but I wish to know how to change the preview of any file.
For example: my file is "mysong.aif", I changed the icon to be "mylogo.png" using cmd+i, cmd+v on the icon. But the preview of the file still remain the same.
I know it can be changed using iTunes, but I don't want to import all my files in iTune, and iTune cannot import all type of files.
I hope someone will understand my needs...
Thanks!Thanks BeerbarX
You can't change the preview image for anything
hoo
QuickLook plugin
what are the plugin ?
In the case of a music file, it will be that generic black box with a note on it
That is exactly what I'm asking about !
MP3 which has a special tagging standard that can include artwork
How can I "tag" my MP3 without going thru iTunes ? Is it possible to do it dirrectly in the Finder ? Is there other type of files that can include such tags ?
Thank you for answering my question , wich I have to admit may seem useless, but I wish I could put something like a signature logo on each of the different file I produce (as AIF for music and MP4 for video clip) instead of that generic black box with a note on it, and by the meantime keeping a different icon for all of them in order to illustrate theire content. -
After upgrading MacBook Pro to OS X Yosemite, "Today" files are not displayed in Finder / Favorites / All My Files. It worked prior to the upgrade.
After further investigation, it is not the displaying of "Today" files that is the issue. It appears that Finder / Favorites / All My Files is not correctly finding & displaying files when using the View / Arrange By / Date Last Opened criteria. If I switch the criteria to / Date Modified, it finds & displays the file correctly. See attached screen shots. (It is possible that this problem existed before Yosemite, as I don't recall which criteria Finder was using before the upgrade.)
-
My pdf files do not display the full page on Creative Cloud (side of pages missing)
Hello
My pdf files do not display the full page on Creative Cloud (side of pages missing).
Does anyone else have this problem?
ThanksCreative Cloud is the process used to download and install programs... which program are you using?
If Acrobat, http://forums.adobe.com/community/acrobat may be a better place to ask -
File icons not displaying in dock folders
I'm having trouble seeing File icons in the folders added to the dock in Lion. For example I am used to seeing a file icon that isa preview of the file e.g. for a pdf the icon would show the content of that pdf. For many files (but not all) I just see a black box with a white dashed line around it (see image).Eventually these icons may refresh and display properly and if I open the folder in finder the icon is correct but not in stacks. It's not a file type specific issue because in the attached image some jpegs are displaying other are not. Any advice?
Solved.
Reset the p-ram. -
Some JPG images, stored in DB, do not display on screen/image item.
Hi friends,
I have a form to save and retrieve images (JPG, GIF, TIF) to and from DB, using WEBUTIL_FILE_TRANSFER.CLIENT_TO_DB and CLIENT_IMAGE.WRITE_IMAGE_FILE respectively.
It’s working fine, but with few JPG images, it stores in DB but do not display on screen/image item.
Secondly, if I try to retrieve and write this JPG to OS (using CLIENT_IMAGE.WRITE_IMAGE_FILE), it prompts error “FRM-47101: Cannot write image file”.
Environment:
Forms [32 Bit] Version 10.1.2.0.2
OS XP Pro 2002 SP3
Oracle DB 11g Enterprise Edition Rel. 11.1.0.7.0 - 64bit
Any help will be highly appreciated.Hi,
I have done a workaround here, which worked for me.
My requirement is to direct save images in DB. So my system was just saving images without knowing if picture would display on form or not later.
I created a (non-DB) image item on form and added a code (CLIENT_IMAGE.READ_IMAGE_FILE) to place image in this image item, if it successfully display image then save image directly in DB using code (WEBUTIL_FILE_TRANSFER.CLIENT_TO_DB).
Note: - If CLIENT_IMAGE.READ_IMAGE_FILE fails it raises exception and it means image has invalid format/internal data header and system does not save image in DB.
Now I have a kind of a filter to stop saving pictures which do not display later on form. :)
Edited by: user12173428 on 29/09/2011 16:38 -
Icons files will not displaying when running web-based forms locally
My icon files (jpgs) are not displaying from within Forms Developer 10g or when I run the web-based forms from within Developer. I have tried the following without success:
6.4 Deploy Icons for Forms Running on Web
Option One: For Running Web Based Forms from Within the Forms Builder in Oracle 10g Developer Suite
1) Copy all the icon image files (*.jpg) to the directory of <Oracle_10g_Developer_Suite_Installation_Root_Dir>\forms\j2ee\formsapp\formsweb\icons
2) Make sure to set imageBase=DocumentBase in the file < Oracle_10g_Developer_Suite_Installation_Root_Dir >\forms\server\formsweb.cfg.
3) Edit the < Oracle_10g_Developer_Suite_Installation_Root_Dir >\forms\java\oracle\forms\registry\Registry.dat file, specify the icon image file extension by modifying the following line:
default.icons.iconepath=icons/
default.icons.iconextension=jpg
Save this Registry.dat file.
4) Restart the OC4J Instance.
5) Launch the form from Forms Builder.
I just got a new laptop and am setting everything up again. I have everything setup the same way as on my old machine (same as above). It worked fine on my old computer but not on the new one.hi
try to create jar file for u r all jpgs but also u have to check the size of u r images
and if possible try to resave the same images by using Acdsee or use any other image viewer softwares.
hope this helps u...
sarah -
XML Publisher report output in RTF format does not display full page
Hi,
We have one XML Publisher report, the output of report in RTF format is not getting displayed in Full Page in normal way (MS Word -->View menu --> Print layout) but we can see full page display when we do MS Word -->View menu --> Outline.
Appreciate your valuable inputs on this.
Is this a template issue or any profiles needs to be set.
Thanks
VijayDo you have any header and footer on your template?
If you have any header and footer then try to adjust it as of to display full page.
Thanks
Yasar -
Text File Data not Displaying completely
Hi All,
Have one issue. The program correctly extracts the data & export to Excel. All column /field data's are dispalying.However while saving this data in a text file in Aplications server file path, though all column/ field data are extracting bit it is not displaying complete column/field data's i.e last 3 or 4 column data's are not displaying after 257 character space (but actually it extracts data.It is just not dispalying while i am checking text file via AL11).
What could be the reason of not dipslaying the all column/filed values in text file wherea as while exporting to excel it is displaying? is there any character length constraint for text file?
Thanks>
Debabrata wrote:
> What could be the reason of not dipslaying the all column/filed values in text file wherea as while exporting to excel it is displaying? is there any character length constraint for text file?
There is no restriction on the file size which you can upload on the app server. AL11 is nothing but a report program & there is a limitation on the max number of characters displayed on the page.
BR,
Suhas -
.mov file does not display on the web-site
iWeb is easy to use but my simply link to a .mov file does not work. I am working on the Domain file on my Desktop so I can move it between computers, and it renames the media file in the inspector from name.mov to name-1.mov. In the end the site does not display the animation.
Are you linking to this file so that it can be downloaded from your website?
Maybe you are looking for
-
JFX 2.0 -fx-highlight-text-fill style has no effect
When I try to set the highlight-text-fill style for a TextBox, it has no effect. The highlight-fill style, however, works as expected. public void start(Stage primaryStage) { final TextBox tb = new TextBox(100); tb.setStyle("-fx-font-size: 3e
-
Icons wont drag and drop onto particular area
Ok on my desktop there is a section of my desktop on the left side (basically the area underneath where my dock comes out) where i cant put any icons or documents of any description. The rest of my desktop is active and can be used but this one littl
-
I have cleared my cookies and cache and disabled some add ons, but when in Facebook and specifically for Farmville, I keep getting the pop up box, "This web page is being redirected to a new location. Would you like to resend the form data you have t
-
Free qty mention in AR Invoice ?
Our client business needs the following in AR Invoice when they sell item1 10 pcs , then 1 pc is free. when they sell item1 20 pcs, then 2 pcs are free. Now, how to incorporate it while making Invoice. Please advise Thanks in Advance
-
Linking Word documents/Open in Word
I am working in Dreamweaver 8. I have a link to a Word document (template with a dot extension). I would like to know if there is a way to have the document open in Word rather than Microsoft Internet Explorer. Thanks, Jamie