IMAP sync server folders doesn't work

I have IMAP set up w/ my mail service, fastmail.  I can download my inbox, but I can't download any other folders.  In particular I have a filter set up on fastmail to move some email to a folder and I would like to sync that w/ my palm TX.  The only folder that seems to get synced is inbox.  Any suggestions?
Palm TX
versamail 3.1C
Post relates to: Palm TX

I have used IMAP IDLE for years with no problem having new mail sound. However in the last few days the alert sound has stopped working. I guess its related to a software update we had recently.
Very annoying to loose the alert sound.

Similar Messages

  • Calendar sync via cable doesn't work with now I've updated to Maverick and ios7

    Calendar sync via cable doesn't work now I've updated to Maverick and ios7.

    I am sorry you are having this trouble. 
    Here is an article on troubleshooting calendar syncing with iCloud.  See if the suggestions there are of help.
    http://support.apple.com/kb/TS3999

  • TS1398 What would be the reason why when i try to connect my iphone to a wifi server; it doesn't work? It also doesn't pick up any wifi connections.

    What would be the reason why when i try to connect my iphone to a wifi server; it doesn't work? It also doesn't pick up any wifi connections.

    go to settings>general> reset network connections  and then try again

  • IPhone 5 contacts local sync via usb doesn't work - updated

    Syncing an iPhone 5, AT&T 64GB, with Macbook Air 11" mid-2011, 1.8GHz / 4GB.
    OS X 10.10.2; iTunes 12.1.0.50; iOS 8.1.3.
    I am trying to sync my contacts from my OS X Contacts App to my iPhone 5 via USB. The contacts do not sync. The contacts are local, "on my mac". I am using a usb cable through iTunes.
    The iPhone 5 was just restored by Apple Configurator, set up as new iPhone, and is supervised by the MacBook Air.
    I am also synchronizing my local Calendars from the OS X Calendar app; these transfer just fine. This makes me think it is probably not to do with the entire setup of the iPhone, i.e. that it is managed by apple configurator, since some of the sync works correctly.
    Under "info" in the iTunes sync dialog, I have selected the "sync contacts" and "all contacts" and "sync calendars" and "all calendars" options.
    Interestingly, while the Calendars sync options displays options of "selected calendars" and a list of my calendars available to sync, the Contacts section "selected groups" is grayed out. I have one group in Contacts, and it does not show up by name for "selected groups". Instead, the area where groups should be listed for selection is empty. Perhaps iTunes does not have access to my local contacts? It is not listed under apps with access to my contacts under security and privacy, and it has not requested access to my contacts.
    I created a fake contact on the phone and synced it with iTunes. I then turned off contact syncing in iTunes and told it to remove previously synced contacts. The fake contact disappeared. When I turned contact syncing on again, the contact was again pushed to the phone. However, the fake contact did not appear at any point in the OS X Contacts App, and none of my OS X Contacts appeared on my phone -- only the fake contact I had created on my phone and then synced with iTunes.
    I also created a (different) fake contact in OS X Contacts. iTunes sync did not transfer this contact (or any others) from OS X Contacts to iPhone.
    SUMMARY:
    - syncing iPhone 5 via USB with iTunes
    - Calendar sync works
    - Contacts sync doesn't work
    - iTunes appears to have no communication with the OS X Contacts app; in system prefs > security and privacy > privacy > contacts, Pages and Word have access to Contacts, but iTunes is not listed. iTunes Contacts sync "selected groups" does not display my OS X Contacts group names.
    - Contacts created on iPhone sync back to iTunes and are restored back to the iPhone if deleted and resynced.
    - Contacts created on iPhone do not sync back to OS X Contacts; Contacts in OS X Contacts do not sync to iPhone.
    (apologies for premature posting to "Using iPhone"; I accidentally submitted and now can't delete or edit).

    Here's the resolution: I went to my local Apple store and spoke to the guy. After some discussion it turned out that one of the staff had had a similar problem. He suggested this course and I can report that it seems to work. So, (1) open your system preferences and then the print & fax setting and delete the printer in question (2) disconnect the USB between the printer and the TimeCapsule (3) shut everything down and turn off power to your modem, your TimeCapsule and your whole system (4) power on each item in its normal sequence (5) wait for your iMac to complete its boot-up, (6) re-connect the USB between the printer and the TimeCapsule (7) open system preferences and search for and install the relevant printer (8) try printing.
    This is hardly elegant, but it worked. I am told (by the same Apple store) that hitting the "reset" button in the TimeCapsule might also work. If this is intuitive or obvious to anyone else then my compliments to them ...
    Cheers
    OzHutz

  • After upgrade to IOS 8.3 sync with iTunes doesn't work

    After upgrade iPhone 6, iPad Air to IOS 8.3, the sync (over wifi, as well) to iTunes doesn't work anymore.
    On iMAC iTunes, the last sync's hour and day appear different from what is recorded on mobile devices (iPhone and iPad); with IOS 8.2 and the previous iTunes' version the sync worked correctly: the dates are the same only for few seconds after syncronization, then the IOS devices show the syncronization's dates related to two weeks ago.
    Thanks

    you'll need to contact your carrier.

  • Search in Outlook 2010 with Exchange Server 2010 doesn't work properly

    Hi all,
    I have a problem with a clients Exchange 2010. Search function in Outlook 2010 doesn't work properly, the employee can't search mails and contact - he doesn't get any result :-(
    In application syslog/protocol I get this error:
    Function  'CISearch::EcGetRowsetAndAccessor' found, content indexing for database  'Mailbox Database 0139257080' caused by MSSearch-Error '0x80041820' deactivated
    Can anybody help me with this, if its necessary I can give further information :-)
    Thomas
    Thomas Deinert

    Hi,
    What’s Exchange Version? Sometimes, after Installing Exchange 2010 SP 1, Searching via OWA or Outlook Online Mode may Fail. If so, please try the following solution:
    Download the script
    Repair-ExchangeSearchSymlinks.ps1 from the Script Center.
    Copy the Repair-ExchangeSearchSymlinks.ps1 script to the Scripts directory on the Mailbox server (default installation is C:\Program Files\Microsoft\Exchange Server\v14\Scripts).
    On the afflicted Mailbox server, open the Exchange Management Shell by right-clicking the shortcut and selecting “Run as Administrator”.
    Within the Exchange Management Shell, navigate to the Exchange Scripts directory.
    Within the Exchange Management Shell, run the following script: .\Repair-ExchangeSearchSymlinks.ps1
    Within the Exchange Management Shell, run the following script (without the symbols [] and substitute the database name(s) for any databases you wish to reset: .\ResetSearchIndex.ps1 [-force] <dbname> [<dbname>]...
    You will receive an Event ID 109 when the rebuilding of the index starts for each database and an Event ID 110 for each database when the index rebuild has completed.
    After receiving Event ID 110 for each database, test to make sure search functions correctly with both OWA and Outlook operating in Online Mode.
    Similar thread:
    https://social.technet.microsoft.com/Forums/exchange/en-US/35db030c-277f-49d6-83d6-772f839a47f8/owa-2010-sp1-search-problems?forum=exchange2010
    Best Regards.

  • Safari & OS X Server Wiki - Doesn't Work on iPad (64GB)

    I was very disappointed to find that Safari on iPad wouldn't even display our OS X Server pages. I could log in and navigate the top page but it began to fail as I drilled down resulting in a grayed out screen with the spinnig gear.
    I've heard that Apple's development groups work in silos and do not talk with each other or work to ensure interoperability between Apple systems. The OS X Server group seems to be especially isolated. The was true with iPhone and now seems to be with iPad.
    If anyone finds a workaround please post it here.

    Hummm... looks like it is some kind of question of speed because if I wait long enough it looks like the pages load after all. What I was considering "Doesn't work" is actually long load times... and I would say unexpectedly long load times. I'm doing a few more tests to verify this before I pull back the question or mark it answered.
    Is anyone else experiencing very long load times for nested wiki pages?

  • Sync apps button doesn't work

    The "SYNC APPS" button in itunes doesn't work. I've been trying to depress it in itunes but it doesn't place a check mark. the Iphone 3g is now updated. still doen't work. Nope, not jailbroken.

    Additionally, I downloaded a few apps and i can't drag them to the phone either. I also did the "Transfer purchases.."
    Thanks!

  • IMAP Account - Mail Sound doesn't work

    Hi I'm a new user and I already checked in this forum if there was a solution about my problem, but I haven't found it.
    If I set my account with IMAP protocol, incoming email sound doesn't work... if I set it with POP3 protocol, it works...
    OS X ver. 10.6.7
    Mail ver. 4.5 (1084)
    Thanks!
    PS sorry for my bad english...

    I have used IMAP IDLE for years with no problem having new mail sound. However in the last few days the alert sound has stopped working. I guess its related to a software update we had recently.
    Very annoying to loose the alert sound.

  • Mail sync via iCloud doesn't work

    Emails I send on my iPad are not showing up in the Sent items box in Mail on my iMac at home.
    I am using Gmail, and they of course show up in the Sent items mailbox there in Mail.
    Any thoughts welcome.

    I have all my account listed under Inbox, including iCloud and Googlemail. The latter is POP, and the 'sent' messages appear only on the Mac from which they were sent as this is a local mailbox. The iCloud 'Sent' mailbox is actually store on the iCloud server and read from there, so that sent message appear on all devices, because iCloud is IMAP whereas my Google account is POP. If you want 'syncing' of sent messages you have to use IMAP.
    It appears Gmail does offer IMAP - I'm not sure whether you have to request this or whether it's just a question of different settings. You could start with this Help page:
    http://support.google.com/mail/bin/topic.py?hl=en&topic=1668961&parent=1669040&c tx=topic

  • Test content server connection doesn't work

    Hello,
    I have installed Content Server 6.40 in windows2008 and the test connection does not work. The URL http://onecsrdev:1090/ContentServer/ContentServer.dll?serverInfo
    says
    Internet Explorer cannot display the webpage
       Most likely causes:
    You are not connected to the Internet.
    The website is encountering problems.
    There might be a typing error in the address. 
    I loof for the contentserver.dll file and it does not exist in the server. When I installed the content server I mark the flag install website, so I don't understand what the problem is.
    I have updated the MAXDB software to 7.6.06.11 because the DVD installation release is not valid for windows2008. SAP has guided me through this issue.
    Thanks and best regards,
    Ana

    > I have installed Content Server 6.40 in windows2008 and the test connection does not work. The URL http://onecsrdev:1090/ContentServer/ContentServer.dll?serverInfo
    >  says
    > Internet Explorer cannot display the webpage
    You get a connection to  "onecsrdev"? Can internet explorer resolve the name? Proxies activated?
    Markus

  • Drag & drop regions into existing folders doesn't work?! Bug?

    Here is a direct quote from the logic manual on what I want to do and how it should be done:
    Adding and Removing Regions from Folders
    You can easily add regions to, or remove regions from, an existing folder. This is fairly commonplace as you will often experiment with your arrangement, and find that you need to add or remove parts.
    To move regions into a folder
    At the top level of the Arrange hierarchy (outside the folder) drag the regions onto the folder, at the desired position.
    If the folder does not already contain a track that uses the same channel as the source region, Logic Pro creates one. If it does, this channel is used. When you enter the folder, you see the dragged regions at the drop position.
    http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=13%26se ction=27%26tasks=true
    When I do this, it moves the midi region but does NOT create "a track that uses the same channel as the source region," like it should! However, if I use the Pack folder command, it DOES create the necessary tracks.
    Any ideas? Are folders broken in Logic 9.1.3? Can someone try the following and report back:
    1. Create a new logic session and add 4 files from the loop browser (2 blue audio loops, 2 green apple loops).
    2. Select one of the audio and one of the midi and run key commend -"pack folder" (go into the folder and you should see both the regions and their tracks are now in the folder)
    3. exit the folder and now try individually dragging (just like the manual says you can) the remaining audio file and midi file from the arrange page into the folder.
    The result (in my song at least) is a new track called "no output," when according to the manual it should duplicate the track that the region came from in the folder!
    Seems like a bug to me, and I would appreciate it if someone could verify it. Thanks

    I've experienced this bug, and others, Jonathan. I stopped trying to drag anything in or out of folders several versions ago--just too buggy. Would be great if this functionality gets fixed, but from your report... we're still waiting.
    I've found that folders work great as long as you stick to the pack and unpack feature. Too bad this is one of the many areas in which Logic claims to have more features than it does in practice...
    -James

  • My sync confirmation mail doesn't work

    for the first time when i tried to set my sync option up on my nexus7 device
    my confirmation mail on gmail didn't work.
    when i click werify button this message (below) appeares
    Verification link damaged
    The link you clicked was missing characters, and may have been broken by your email client. Copy the address carefully, and try again.

    Weird,
    Does it look like this?
    https://account.services.mozilla.com/forgot?username=zyvguxxlqlis56zeatzsf53pdpuoztjl&key=KE2Q-WGER-MESZ-1T0B
    or this:
    https://accounts.firefox.com/v1/complete_reset_password?token=e804220435b0d71a0a948041zda884850baa7aa45fb8f95dab5fac79f2da251f&code=0a6fd5eb6614323bb763d5a6af1bd38e&email=username%40mozilla.com&service=sync
    The second one is the newer sync and copying and pasting it into the browser may be tricky. Please make sure all the characters are there.

  • HotFix4 for SQL Server 2005 doesn't work

    I am having problems getting a machine running SQL Server 2008 R2 (Express) to connect to a SQL  Server 2005 (Full Standard Edition) DB on another machine via the LAN. It times out when connecting from a C# application. SSMS on the SQL 2008 machine
    connects fine, but SSMS on the 2005 machine (connecting to a copy of the same DB on the 2008 machine) says it isn't supported and I need a hotfix.
    I downloaded the hotfix link  from Microsoft, but when I paste it into the Browser I get a DNS name failure for the Hotfix4 server. I don't want to paste the full link here because it is not made public by MS and you need to request it. However, the
    first part of the URL is: http://hotfix4.microsoft.com/SQL%20Server%202005...etc.
    I have checked out all of the obvious things in both instances (2005 AND 2008)... Both instances are configured to accept remote connections, both have TCP/IP and named pipes protocols enabled, both are running fine for local connections, both have the SQL
    Browser enabled and the Computer Browser Service running on the network.
    As the hot fix doesn't install, I am kind of out of ideas.
    Any suggestions?
    Thanks,
    Pete
    I used to write COBOL... now I can do anything.

    SQL 2005 is out of
    mainstream support:
    SQL Server
    2005
    SP4
    04/12/2011
    04/12/2016
    Technical support continues till 04/12/2016, yet mainstream (hotfix) support ends as of 04/12/2011; options
    for hotfix support after 04/12/2011:
    ð  Continue
    with self-help
    ð  Upgrade
    to the latest supported service pack for SQL Server 2005 or SQL Server 2008 or SQL Server 2008 R2
    ð  Extended
    hotfix support agreement
    SP4 and CU3 are still available for download, if this helps...
    http://support.microsoft.com/kb/2507769
    http://www.microsoft.com/en-US/download/details.aspx?id=7218
    But you should update your SQL-Server..... SQL 2014 is the latest version

  • Missing sync, pocket PC, and sync conflicts--just doesn't work

    Anyone with experience using missing sync with pocket PC would be greatly appreciated. I simply can't get this to work right. I constantly get the same "sync conflicts" I resolve them only to have them pop right back up--even before I try to sync again. This also immediately crashes iCal. So now I'm pretty much unable to use iCal. It's getting to be a crisis. Sometimes I can do a hard reset on my handheld and things will run smoothly for about 2 or 3 syncs then it gets all screwy again. Any ideas?
    Thanks.
    a.
    macbook   Mac OS X (10.4.6)  

    Did you ever get an answer or help with this problem. I'm suffering the same deal, and would appreciate hearing anything from you if you have found a solution.
    Thanks,
    Bryce

Maybe you are looking for