IMAPConnection was deallocated while key value observers were still reg....

Every so often my IMAP connect hangs to the point I have to Force Quit the application to get it back. It appears to be hanging on
*Saving Draft*
STOPPING: Opening "ClickMarkets"...
*Sending message*
Archiving copy to mailbox "Sent Messages"
I looked in the Console and found several messages of the form:
12/24/09 11:35:43 PM Mail[138] An instance 0x128899ee0 of class IMAPConnection was deallocated while key value observers were still registered with it. Observation info was leaked, and may even become mistakenly attached to some other object. Set a breakpoint on NSKVODeallocateBreak to stop here in the debugger. Here's the current observation info:
<NSKeyValueObservationInfo 0x117664760> (
<NSKeyValueObservance 0x121d98f50: Observer: 0x1005b1080, Key path: isDisconnected, Options: <New: NO, Old: NO, Prior: NO> Context: 0x0, Property: 0x1164db1a0>
<NSKeyValueObservance 0x121d98f50: Observer: 0x1005b1080, Key path: isDisconnected, Options: <New: NO, Old: NO, Prior: NO> Context: 0x0, Property: 0x1164db1a0>
Followed ultimately by the last entry which was an exception:
12/25/09 11:06:59 PM Mail[138] An exception was thrown 'Cannot remove an observer <IMAPConnectionPool 0x1005b1080> for the key path "isDisconnected" from <IMAPConnection 0x103c476f0> because it is not registered as an observer.' during invocation of -[IMAPMailboxSyncEngine _goWithMessagesIfNeeded:]. Stack trace:
0 CoreFoundation 0x00007fff82685444 __exceptionPreprocess + 180
1 libobjc.A.dylib 0x00007fff85d330f3 objcexceptionthrow + 45
2 CoreFoundation 0x00007fff82685267 +[NSException raise:format:arguments:] + 103
3 CoreFoundation 0x00007fff826851f4 +[NSException raise:format:] + 148
4 Foundation 0x00007fff84d28ede -[NSObject(NSKeyValueObserverRegistration) _removeObserver:forProperty:] + 597
5 Foundation 0x00007fff84d28c2b -[NSObject(NSKeyValueObserverRegistration) removeObserver:forKeyPath:] + 135
6 Message 0x00007fff82e41b90 -[IMAPConnectionPool _setConnection:forMailbox:clear:inDictionary:] + 1181
7 Message 0x00007fff82f1dd24 -[IMAPConnectionPool _suspendGatewayOfConnection:mailbox:forMailbox:resumingGateway:] + 499
8 Message 0x00007fff82e64b32 -[IMAPConnectionPool yieldGateway:] + 247
9 Message 0x00007fff82e64106 -[IMAPGateway yield] + 54
10 Message 0x00007fff82e48f76 -[IMAPMailboxSyncEngine _goWithMessages:] + 1433
11 CoreFoundation 0x00007fff8265b0dc _invoking__ + 140
12 CoreFoundation 0x00007fff8265afad -[NSInvocation invoke] + 141
13 Message 0x00007fff82dff3f1 -[MonitoredInvocation invoke] + 214
14 Message 0x00007fff82de6888 -[ThrowingInvocationOperation main] + 31
15 Message 0x00007fff82de61c8 -[_MFInvocationOperation main] + 275
16 Foundation 0x00007fff84d4206d -[__NSOperationInternal start] + 681
17 Foundation 0x00007fff84d41d23 ___startOperations_block_invoke2 + 99
18 libSystem.B.dylib 0x00007fff86df9ce8 dispatch_call_block_andrelease + 15
19 libSystem.B.dylib 0x00007fff86dd8279 dispatch_workerthread2 + 231
20 libSystem.B.dylib 0x00007fff86dd7bb8 pthreadwqthread + 353
21 libSystem.B.dylib 0x00007fff86dd7a55 start_wqthread + 13
Any clues on what might be triggering this issue to arise and how I can resolve it?
Thanks!

Similar Messages

NullPointerException was thrown while extracting a value from an instance

Dear all,
We have got a null point exception during commit call. According to the stack trace shown below, it seems that it is a problem due to instance variable accessor. As we know toplink use reflection to access the instance variable value. I am curious whether the exception we got is related to any class-loader setting. Thanks a lot.
=================
Stack Trace:
Exception [TOPLINK-69] (OracleAS TopLink - 10g (9.0.4.5) (Build 040930)): oracle
.toplink.exceptions.DescriptorException
Exception Description: A NullPointerException was thrown while extracting a valu
e from the instance variable [versionID] in the object [com.oocl.csc.frm.pom.tes
t.model.Company].
Internal Exception: java.lang.NullPointerException
Mapping: oracle.toplink.mappings.DirectToFieldMapping[versionID-->COMPANY.VERSIO
NID]
Descriptor: Descriptor(com.oocl.csc.frm.pom.test.model.Company --> [DatabaseTabl
e(COMPANY)])
at oracle.toplink.exceptions.DescriptorException.nullPointerWhileGetting
ValueThruInstanceVariableAccessor(DescriptorException.java:1022)
at oracle.toplink.internal.descriptors.InstanceVariableAttributeAccessor
.getAttributeValueFromObject(InstanceVariableAttributeAccessor.java:68)
at oracle.toplink.mappings.DatabaseMapping.getAttributeValueFromObject(D
atabaseMapping.java:304)
at oracle.toplink.mappings.DirectToFieldMapping.iterate(DirectToFieldMap
ping.java:355)
at oracle.toplink.internal.descriptors.ObjectBuilder.iterate(ObjectBuild
er.java:1438)
at oracle.toplink.internal.descriptors.DescriptorIterator.iterateReferen
ceObjects(DescriptorIterator.java:258)
at oracle.toplink.internal.descriptors.DescriptorIterator.startIteration
On(DescriptorIterator.java:407)
at oracle.toplink.publicinterface.UnitOfWork.discoverUnregisteredNewObje
cts(UnitOfWork.java:1368)
at oracle.toplink.publicinterface.UnitOfWork.discoverAllUnregisteredNewO
bjects(UnitOfWork.java:1290)
at oracle.toplink.publicinterface.UnitOfWork.assignSequenceNumbers(UnitO
fWork.java:326)
at oracle.toplink.publicinterface.UnitOfWork.collectAndPrepareObjectsFor
Commit(UnitOfWork.java:664)
at oracle.toplink.publicinterface.UnitOfWork.commitToDatabaseWithChangeS
et(UnitOfWork.java:1130)
at oracle.toplink.publicinterface.UnitOfWork.commitRootUnitOfWork(UnitOf
Work.java:956)
at oracle.toplink.publicinterface.UnitOfWork.commit(UnitOfWork.java:771)
====================
====================
Mapping Description:
<?xml version = '1.0' encoding = 'UTF-8'?>
<project>
<project-name>POM-TEST</project-name>
<login>
<database-login>
<platform>oracle.toplink.oraclespecific.Oracle9Platform</platform>
<driver-class>oracle.jdbc.driver.OracleDriver</driver-class>
<connection-url>jdbc:oracle:thin:@sjcngdb2:1521:cdrfrmdv</connection-ur
l>
<user-name>pomowner</user-name>
<password>BB742416276274A47F360CCDD2711570</password>
<uses-native-sequencing>false</uses-native-sequencing>
<sequence-preallocation-size>50</sequence-preallocation-size>
<sequence-table>SEQUENCE</sequence-table>
<sequence-name-field>SEQ_NAME</sequence-name-field>
<sequence-counter-field>SEQ_COUNT</sequence-counter-field>
<should-bind-all-parameters>false</should-bind-all-parameters>
<should-cache-all-statements>false</should-cache-all-statements>
<uses-byte-array-binding>true</uses-byte-array-binding>
<uses-string-binding>false</uses-string-binding>
<uses-streams-for-binding>false</uses-streams-for-binding>
<should-force-field-names-to-upper-case>false</should-force-field-names
-to-upper-case>
<should-optimize-data-conversion>true</should-optimize-data-conversion>
<should-trim-strings>true</should-trim-strings>
<uses-batch-writing>false</uses-batch-writing>
<uses-jdbc-batch-writing>true</uses-jdbc-batch-writing>
<uses-external-connection-pooling>false</uses-external-connection-pooli
ng>
<uses-external-transaction-controller>false</uses-external-transaction-
controller>
<type>oracle.toplink.sessions.DatabaseLogin</type>
</database-login>
</login>
<java-class>com.oocl.csc.frm.pom.test.model.Company</java-class>
<tables>
<table>COMPANY</table>
</tables>
<primary-key-fields>
<field>COMPANY.COMPANY_KEY</field>
</primary-key-fields>
<descriptor-type-value>Normal</descriptor-type-value>
<identity-map-class>oracle.toplink.internal.identitymaps.SoftCacheWeakI
dentityMap</identity-map-class>
<remote-identity-map-class>oracle.toplink.internal.identitymaps.SoftCac
heWeakIdentityMap</remote-identity-map-class>
<identity-map-size>100</identity-map-size>
<remote-identity-map-size>100</remote-identity-map-size>
<should-always-refresh-cache>false</should-always-refresh-cache>
<should-always-refresh-cache-on-remote>false</should-always-refresh-cac
he-on-remote>
<should-only-refresh-cache-if-newer-version>false</should-only-refresh-
cache-if-newer-version>
<should-disable-cache-hits>false</should-disable-cache-hits>
<should-disable-cache-hits-on-remote>false</should-disable-cache-hits-o
n-remote>
<alias>Company</alias>
<copy-policy>
<descriptor-copy-policy>
<type>oracle.toplink.internal.descriptors.CopyPolicy</type>
</descriptor-copy-policy>
</copy-policy>
<instantiation-policy>
<descriptor-instantiation-policy>
<type>oracle.toplink.internal.descriptors.InstantiationPolicy</ty
pe>
</descriptor-instantiation-policy>
</instantiation-policy>
<query-manager>
<descriptor-query-manager>
<existence-check>Check cache</existence-check>
</descriptor-query-manager>
</query-manager>
<event-manager>
<descriptor-event-manager empty-aggregate="true"/>
</event-manager>
<mappings>
<database-mapping>
<attribute-name>companyKey</attribute-name>
<read-only>false</read-only>
<field-name>COMPANY.COMPANY_KEY</field-name>
<type>oracle.toplink.mappings.DirectToFieldMapping</type>
</database-mapping>
<database-mapping>
<attribute-name>contact</attribute-name>
<read-only>false</read-only>
<reference-class>com.oocl.csc.frm.pom.test.model.Contact</referen
ce-class>
<is-private-owned>false</is-private-owned>
<uses-batch-reading>false</uses-batch-reading>
<indirection-policy>
<mapping-indirection-policy>
<type>oracle.toplink.internal.indirection.NoIndirectionPoli
cy</type>
</mapping-indirection-policy>
</indirection-policy>
<uses-joining>false</uses-joining>
<foreign-key-fields>
<field>COMPANY.CONTACT_OID</field>
</foreign-key-fields>
<source-to-target-key-field-associations>
<association>
<association-key>COMPANY.CONTACT_OID</association-key>
<association-value>CONTACT.POID</association-value>
</association>
</source-to-target-key-field-associations>
<type>oracle.toplink.mappings.OneToOneMapping</type>
</database-mapping>
<database-mapping>
<attribute-name>createdBy</attribute-name>
<read-only>false</read-only>
<field-name>COMPANY.CREATED_BY</field-name>
<type>oracle.toplink.mappings.DirectToFieldMapping</type>
</database-mapping>
<database-mapping>
<attribute-name>creationClientID</attribute-name>
<read-only>false</read-only>
<field-name>COMPANY.CREATION_CLIENTID</field-name>
<type>oracle.toplink.mappings.DirectToFieldMapping</type>
</database-mapping>
<database-mapping>
<attribute-name>creationTime</attribute-name>
<read-only>false</read-only>
<field-name>COMPANY.CREATION_TIME</field-name>
<type>oracle.toplink.mappings.DirectToFieldMapping</type>
</database-mapping>
<database-mapping>
<attribute-name>employeeList</attribute-name>
<read-only>false</read-only>
<reference-class>com.oocl.csc.frm.pom.test.model.Person</referenc
e-class>
<is-private-owned>false</is-private-owned>
<uses-batch-reading>false</uses-batch-reading>
<indirection-policy>
<mapping-indirection-policy>
<type>oracle.toplink.internal.indirection.NoIndirectionPoli
cy</type>
</mapping-indirection-policy>
</indirection-policy>
<container-policy>
<mapping-container-policy>
<container-class>com.oocl.csc.frm.pom.impl.FWPersistentArra
yList</container-class>
<type>oracle.toplink.internal.queryframework.ListContainerP
olicy</type>
</mapping-container-policy>
</container-policy>
<relation-table>EMPLOYEMENT</relation-table>
<source-key-fields>
<field>COMPANY.COMPANY_KEY</field>
</source-key-fields>
<source-relation-key-fields>
<field>EMPLOYEMENT.EMPLOYER_KEY</field>
</source-relation-key-fields>
<target-key-fields>
<field>PERSON.POID</field>
</target-key-fields>
<target-relation-key-fields>
<field>EMPLOYEMENT.EMPLOYEE_ID</field>
</target-relation-key-fields>
<type>oracle.toplink.mappings.ManyToManyMapping</type>
</database-mapping>
<database-mapping>
<attribute-name>lastUpdateClientID</attribute-name>
<read-only>false</read-only>
<field-name>COMPANY.LAST_UPDATE_CLIENTID</field-name>
<type>oracle.toplink.mappings.DirectToFieldMapping</type>
</database-mapping>
<database-mapping>
<attribute-name>lastUpdatedBy</attribute-name>
<read-only>false</read-only>
<field-name>COMPANY.LAST_UPDATED_BY</field-name>
<type>oracle.toplink.mappings.DirectToFieldMapping</type>
</database-mapping>
<database-mapping>
<attribute-name>lastUpdateTime</attribute-name>
<read-only>false</read-only>
<field-name>COMPANY.LAST_UPDATE_TIME</field-name>
<type>oracle.toplink.mappings.DirectToFieldMapping</type>
</database-mapping>
<database-mapping>
<attribute-name>name</attribute-name>
<read-only>false</read-only>
<field-name>COMPANY.NAME</field-name>
<type>oracle.toplink.mappings.DirectToFieldMapping</type>
</database-mapping>
<database-mapping>
<attribute-name>partner</attribute-name>
<read-only>false</read-only>
<reference-class>com.oocl.csc.frm.pom.test.model.Company</referen
ce-class>
<is-private-owned>false</is-private-owned>
<uses-batch-reading>false</uses-batch-reading>
<indirection-policy>
<mapping-indirection-policy>
<type>oracle.toplink.internal.indirection.NoIndirectionPoli
cy</type>
</mapping-indirection-policy>
</indirection-policy>
<uses-joining>false</uses-joining>
<foreign-key-fields>
<field>COMPANY.PARTNER</field>
</foreign-key-fields>
<source-to-target-key-field-associations>
<association>
<association-key>COMPANY.PARTNER</association-key>
<association-value>COMPANY.COMPANY_KEY</association-value>
</association>
</source-to-target-key-field-associations>
<type>oracle.toplink.mappings.OneToOneMapping</type>
</database-mapping>
<database-mapping>
<attribute-name>persistentCtxt</attribute-name>
<read-only>false</read-only>
<reference-class>com.oocl.csc.frm.pom.impl.FWPOMPersistentContext
</reference-class>
<is-null-allowed>false</is-null-allowed>
<aggregate-to-source-field-name-associations>
<association>
<association-key>OWNERID</association-key>
<association-value>COMPANY.OWNERID</association-value>
</association>
<association>
<association-key>ROOTID</association-key>
<association-value>COMPANY.ROOTID</association-value>
</association>
</aggregate-to-source-field-name-associations>
<type>oracle.toplink.mappings.AggregateObjectMapping</type>
</database-mapping>
<database-mapping>
<attribute-name>poid</attribute-name>
<read-only>false</read-only>
<field-name>COMPANY.POID</field-name>
<type>oracle.toplink.mappings.DirectToFieldMapping</type>
</database-mapping>
<database-mapping>
<attribute-name>version</attribute-name>
<read-only>false</read-only>
<field-name>COMPANY.VERSION</field-name>
<type>oracle.toplink.mappings.DirectToFieldMapping</type>
</database-mapping>
<database-mapping>
<attribute-name>versionID</attribute-name>
<read-only>false</read-only>
<field-name>COMPANY.VERSIONID</field-name>
<type>oracle.toplink.mappings.DirectToFieldMapping</type>
</database-mapping>
</mappings>
<type>oracle.toplink.publicinterface.Descriptor</type>
</descriptor>
</descriptors>
</project>
====================
====================
Session Creation Method:
SessionBroker broker = (SessionBroker) manager.getSession(brokerName, Thread.currentThread().getContextClassLoader());
broker.getLogin().getPlatform().getConversionManager().setLoader(Thread.currentThread().getContextClassLoader());
====================
===================
Class Hierarchy:
Object extends> ..xxx.. extends> FWObject extends> Company
The problematic attribute -- versionID -- is defined at "FWObject" level.
===================
===================
Environment Configuration:
Application Server version: 10.1.2
TopLink version : 9.0.4.5
TopLink classpath: specified at container level
FWObject classpath: specified at container level
Company classpath: specified at application level
===================
Thanks and regards,
William

Dear All,
We have loaded the toplink.jar to container level instead of application level. Don't know whether it is a possible source of error. Moreover, what is the purpose of loading antlr.jar? What is this jar for?
Thanks and regards,
William

I am facing problem while reading values from properties file ...i am getting null pointer exception earlier i was using jdeveloper10g now i am using 11g

i am facing problem while reading values from properties file ...i am getting null pointer exception earlier i was using jdeveloper10g now i am using 11g

hi TimoHahn,
i am getting following exception in JDeveloper(11g release 2) Studio Edition Version 11.1.2.4.0 but it works perfectly fine in JDeveloper 10.1.2.1.0
Root cause of ServletException.
java.lang.NullPointerException
at java.util.PropertyResourceBundle.handleGetObject(PropertyResourceBundle.java:136)
at java.util.ResourceBundle.getObject(ResourceBundle.java:368)
at java.util.ResourceBundle.getString(ResourceBundle.java:334)
at org.rbi.cefa.master.actionclass.UserAction.execute(UserAction.java:163)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

I got 2 iphone 4 while i was living in the us. they were att. i was told that they were unlocked but they r not. what can i do?

i got 2 iphone 4 while i was living in the us. they were att. i was told that they were unlocked but they r not. what can i do?

iPhones sold by AT&T are never unlocked. Anyone who told you otherwise was wrong. Here are AT&T's official requirements and procedure for unlocking an iPhone:
https://www.att.com/deviceunlock/client/en_US/
You'll have to apply to them for unlocking.
Regards.

Exchange Connector 3.0 (Hotfix Release) Error - Error Message=The key value of an object cannot be changed.

Hello,
I am running Service Manager 2012 with the Exchange Connector 3.0 RTM (Re-release Version). The issue I have is that when an e-mail is processed that is trying to update the status or event log of an incident, the Exchange Connector encounters an error
and will not update the object. The Operations Manager log denotes:
Exchange Connector: Unable to process mail item. Subject="Close Ticket: [IRXXXXX]", Error Message=The key value of an object cannot be changed.
This will happen on a seemingly random selection of Incident work items. I cannot correlate them with a specific template, exchange connector, or incident tier queue that could be causing the issue. I can recreate the way a specific ticket
was created and update it through e-mail without issue, and the next ticket can cause the error to trigger.
I have already opened a Microsoft Support Case using our Software Assurance agreement. After a few months of troubleshooting the issue and trying different fixes, Microsoft support said they were unable to fix the problem and that we would need to
purchase Premier support to go further. At this point I thought I would reach out to the community for ideas.
The setup I have for the Exchange connectors is as follows.
I have three separate Exchange connectors set up to three different mailboxes. One Exchange connector processes external support tickets and applies a specific template. Another processes client support tickets and applies a different template.
And the last Exchange connector processes internal tickets and also processes the updates of tickets created by the other two exchange connectors.
Here are the fixes I've attempted so far:
1. Changed the templates that each Exchange connector applies.
2. Changed the management pack that each template is stored in.
3. Checked my management pack(s) for extended classes by searching for Extension="true" (This was also checked by Microsoft support)
4. Deleted each Exchange connector and recreated each connector
5. Deleted each Exchange connector, deleted the management pack, and reinstalled the management pack and connectors
6. Repeated Step 5, deleted Microsoft.SystemCenter.ExchangeConnector.dll and Microsoft.SystemCenter.ExchangeConnector.resources.dll and then installed the Exchange connector Re-release version 3.0 Published 10/7/2013 (which is supposed to address this
issue)
7. Deleted the HealthServiceState folder and restarted the Management Service
I'm not really sure what to do at this point. I've put many hours into customizing my installation to get it working for my organization so reformatting and starting from scratch would be a nightmare scenario. This environment is in production.
I do have a band-aid in place using Orchestrator. Basically I have a monitor task searching for the error message and when it finds one it searches the mailbox for the offending e-mail and applies either the Resolve or Close status change that is requested
from the user. However, I do not have it working to update the ticket if a comment is applied to the incident. If anyone is in this position and needs to know how to apply this Orchestrator task I am willing to provide my workflow.
I am new to the community and am already impressed with the amount of help and effort there is in this forum. I appreciate in advance any help that is provided and am open to any ideas at this point. I can post more information as needed.
Thank you,
John

Yes that is the whole template. However, I did confirm that this is only happening to incidents where either of two situations triggers a runbook to fire and modify the incident. When I remove the activity from the incident it does clear the
issue. For some background the first Runbook Activity set's the first response date when an incident is resolved if the first response value is null. The second assigns the incident to a user upon creation if the title contains assignto:username;
1.)
<ObjectTemplate ID="Template.d33b5bbcaf3c49b18d8b72bc1e5e1ee4" TypeID="IncidentManagement!System.WorkItem.Incident.ProjectionType">
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Escalated$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/NeedsKnowledgeArticle$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/HasCreatedKnowledgeArticle$">False</Property>
<Object Path="$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' TypeConstraint='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity']$">
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/RunbookId$">4085f0da-ab83-48e5-bbe3-1f3b5fa2dc4a</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/TemplateId$">Template.d33b5bbcaf3c49b18d8b72bc1e5e1ee4</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/IsReadyForAutomation$">True</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/PropertyMapping$"><?xml version="1.0" encoding="utf-16"?>
<ParameterMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<ParameterList>
<RunbookParameterItem>
<Name>Get RA Guid</Name>
<Id>344b15effc1a44528e517c5b4227179c</Id>
<Type>String</Type>
<Value>Generic::Id</Value>
<Direction>In</Direction>
<ContextInfo />
</RunbookParameterItem>
</ParameterList>
<RunbookId>4085f0da-ab83-48e5-bbe3-1f3b5fa2dc4a</RunbookId>
</ParameterMapping></Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/ChildId$">1906</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$">$MPElement[Name='CustomSystem_WorkItem_Activity_Library!ActivityStatusEnum.Active']$</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Skip$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Library!System.WorkItem']/Title$">Set First Response on Resolve</Property>
</Object>
</ObjectTemplate>
2.)
<ObjectTemplate ID="Template.b311e1f9126e4e19bbbbeb65ddb220ba" TypeID="IncidentManagement!System.WorkItem.Incident.ProjectionType">
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Escalated$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Status$">$MPElement[Name='CustomSystem_WorkItem_Incident_Library!IncidentStatusEnum.Active']$</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/NeedsKnowledgeArticle$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/HasCreatedKnowledgeArticle$">False</Property>
<Object Path="$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' TypeConstraint='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity']$">
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/RunbookId$">ca88b13b-861a-4d39-a3cb-fd912d951e35</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/TemplateId$">Template.b311e1f9126e4e19bbbbeb65ddb220ba</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/IsReadyForAutomation$">True</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/PropertyMapping$"><?xml version="1.0" encoding="utf-16"?>
<ParameterMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<ParameterList>
<RunbookParameterItem>
<Name>RA Activity GUID</Name>
<Id>5677d117a0294a2c898a695032f26c72</Id>
<Type>String</Type>
<Value>Generic::Id</Value>
<Direction>In</Direction>
<ContextInfo />
</RunbookParameterItem>
</ParameterList>
<RunbookId>ca88b13b-861a-4d39-a3cb-fd912d951e35</RunbookId>
</ParameterMapping></Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/ChildId$">1120</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$">$MPElement[Name='CustomSystem_WorkItem_Activity_Library!ActivityStatusEnum.Active']$</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Skip$">False</Property>
<Property Path="$Context/Property[Type='WorkItem!System.WorkItem']/Title$">Execute Orchestrator IR - Autoassign</Property>
</Object>
</ObjectTemplate>

Db adaptor for insert- SQLException: [SQL0803] Duplicate key value specified

While invoking db adaptor for insert on table 1 selecting values form another table, i am gtting error ; before3 insert i am updating table 2nd using db adaptor
QUERY insert into CRPDTA.F5504579 (SELECT * FROM CRPDTA.F5504571 WHERE PAHDC=#v_updatedRecord_HDC)
Error :
Non Recoverable System Fault :
<bpelFault><faultType>0</faultType><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'insert_Ledger_F5504579' failed due to: Pure SQL Exception. Pure SQL Execute of insert into CRPDTA.F5504579 (SELECT * FROM CRPDTA.F5504571 WHERE PAHDC=?) failed. Caused by java.sql.SQLException: [SQL0803] Duplicate key value specified.. The Pure SQL option is for border use cases only and provides simple yet minimal functionality. Possibly try the "Perform an operation on a table" option instead. This exception is considered not retriable, likely due to a modelling mistake. To classify it as retriable instead add property nonRetriableErrorCodes with value "--803" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary></part><part name="detail"><detail>[SQL0803] Duplicate key value specified.</detail></part><part name="code"><code>-803</code></part></bindingFault></bpelFault>
Please suggest....

Easter1976 wrote:
Hi please can you help me. I think I am having problems with tranactions. I am deleting from a table and then inserting in the same table with the same key that I have just deleted. Simple then - don't do that. It suggests a flaw in the design. Either use a new key or do an update.
Note that you would get a duplicate key error if the table is set up such that it doesn't
actually delete but doesn't something such as creating a log entry with a delete flag set.

Dimension based on OLAP source returns text value not key value

Hi,
I have a Business Objects Universe based on a BEX query sitting on top of a BW datasource. I imported the BEX query into Designer and several dimensions were created for me as well as several detail objects. I was hoping the dimension objects created when pulled onto a Webi report would display the KEY value of the info object from BW, but unfortunately it appears to be pulling in the text value of the info object.
Is there a way to change the default behavior so that the default dimension created will pull in the key value?
Example:
Universe dimension Object definition: [ZCPCNTR].[LEVEL01]
When pulled into a Webi report the MDX statement generated contains: NON EMPTY [ZCPCNTR].[LEVEL01].MEMBERS DIMENSION PROPERTIES MEMBER_CAPTION
Somewhere ".MEMBERS DIMENSION PROPERTIES MEMTER_CAPTION" gets added to the MDX statement. I think this results in the Webi report displaying the text of the info object as opposed to the key value. Is this modifiable? If so what do I change to get it to display the key value?
Thanks,
Tim

SAPBO786,
Yes I do see the key value as a detail object under the dimension. Do you kow of a way to change the default behavior so the dimension returns the key value?
I have a bunch of reports (approx. 50) I built based on the dimension assuming the value was going to be key. I don't want to go back and change all those reports if possible. I am aware that I can take the Key detail object, change that to a dimension object and then modify my reports to pull that new dimension onto them, but I don't want to do that if there is a way to change the default behavior.
Thanks,
Tim

Inventory management process key values plz

Hi gurus,
can anyone help me with the process key values
in my update rules i have this for issues
process keys= 100,101,104,105,106,110
and for receipts 000,001,004,005,006,010
what do they mean i am using the standard update rules
its very urgent becoz i am getting the stock values wrong
thanks and regards
neelu

hi Neel,
check oss note 352344 - Process key + reversals in Inventory Management ?
Symptom
This note is a consulting note and describes the use of the process key (0PROCESSKEY) in Inventory Management (MSEG). It focusses on the way the system deals with reversed transactions for DataSources 2lis_40_s279 and 2lis_03_bf.
To be able to use theses DataSources, you ABSOLUTELY MUST activate the transaction key generation (process key, PROCESSKEY) using Transaction MCB_ (from the OLTP IMG for BW: SBIW) (standard, retail or consumption goods).
The following transaction keys are available
(PROCESSKEY/Appl. Component/Description):
000/MM        Misc. receipts
001/MM        Goods receipt / vendor
004/MM        Article transfer posting receipt
005/MM        Stock correction inventory +
006/MM        Stock correction other +
007/IS-R      Receipt value-only article (single article
              posting)
010/MM        Receipt from stock transfer
002/IS-R      Merchandise clearing receipt
003/IS-R      GR from DC
100/MM        Misc. issues
101/MM        Returns / Vendor
104/MM        Article transfer posting issue
105/MM        Stock correction inventory -
106/MM        Stock correction other -
107/IS-R      Issue value-only article (single article
              posting)
110/MM        Issue from stock transfer
102/IS-R      Merchandise clearing issue
103/IS-R      GI from DC
450/IS-R      Generic Article (not relevant)
Remark: Transaction keys 002/003, 102/103 break down the core keys 010/110 in more detail with respect to retail processes. They are only available in an R/3 Retail.
As you can see in the overview, the transaction keys can be divided according to receipts and issues in Inventory Management. Furthermore, the transaction keys are displayed according to reversed and regular transactions.
A regular receipt has a debit/credit indicator "S" (SHKZG, 0DCINDIC), whereas a regular issue has a debit/credit indicator "H".
For reverse transactions the opposite is true.
Transaction                            D/C ind.   D/C ind.
                                        S          H
RECEIPTS
0 Misc. receipts                        regular    reversed
1 Goods receipt / vendor               regular    reversed
2 Merchandise clearing receipt        regular    reversed
3 GR from DC                            regular    reversed
4 Article transfer posting receipt    regular    reversed
5 Stock correction inventory +        regular    reversed
6 Stock correction other +            regular    reversed
7 Receipt value-only article          regular    reversed
10 Receipt from stock transfer        regular    reversed
ISSUES
100 Misc. issues                       reversed   regular
101 Returns / vendor                   reversed   regular
102 Merchandise clearing issue        reversed   regular
103 GI from DC                         reversed   regular
104 Article transfer posting issue    reversed   regular
105 Stock correction inventory -      reversed   regular
106 Stock correction other -          reversed   regular
107 Issue value-only article          reversed   regular
110 Issue from stock transfer         reversed   regular
Note: You can also recognize a reversal for DataSource 2lis_03_bf by means of the entry 0STORNO = ´X´. The fields that are marked with X in the table are then transferred with negative +/- sign. This was not the case with DataSource 2LIS_40_S279!!! In the case of DataSource 2LIS_40_S279 more logic was required in the BW update rules to make sure that key figures were updated correctly.
Example:
In the delivered InfoCubes 0CP_IC_C1 (CP) and 0RT_C01 (Retail), for example in key "Stock correction +", transaction keys 5 and 6 were grouped together. Furthermore, distinction is to be made between the different stock types. Depending on which stock types you want to distinguish between in different key figures, you must use a corresponding condition (IF statement) in the update rules in the BW.
Example (pseudo source code):
Updating Routine "stock adjustment +" for 2lis_02_bfIF ( STOCKCAT is initial ) AND         "Evaluated stocks ( PROCESSKEY = 5 OR PROCESSKEY = 6 )._ RESULT = TRANS_AMOUNT. RETURNCODE = 0.    "Updating Key figureELSE. RETURNCODE = 4.    "No Updating of KeyfigureENDIF.
The pseudo source code for 2LIS_40_S279 read as follows:
Updating Routine "stock adjustment +" for 2lis_40_s279IF ( STOCKCAT is initial ) AND         "Evaluated stocks ( PROCESSKEY = 5 OR PROCESSKEY = 6 ).    IF DCINDIC = 'S'.      RESULT = TRANS_AMOUNT.    "regular    ELSE.      RESULT = -1 * TRANS_AMOUNT.    ENDIF.    RETURNCODE = 0.    "Updating Key figureELSE.     RETURNCODE = 4.    "No Updating of KeyfigureENDIF.
Here, the debit/credit indicator must be checked in accordance with the table above. Transactions 5 and 6 are receipts in Inventory Management. As the debit/credit indicator is set to "S", it is a regular transaction whose value(TRANS_AMOUNT) is assigned to the key figure. In the other case (debit/credit indicator = "H") it is a reversal, that is, the transaction should reverse a transaction that has already been updated. For this, the value is multiplied by -1 so that a corresponding decrease/reduction of this key figure is achieved during the update of the key figure in the InfoCube.
This logic is no longer required for the 2LIS_03_BF (see first pseudo source code), because the reversed quantity and values are automatically provided as negative with the help of the 0STORNO field.
Using this DataSource 2LIS_03_BF, it is for example possible to create a key figure such as "Reversed receipts", which is not a part of the Business Content delivered. The following pseudo source code of an update routine makes this clear:
Update routine "Reversed receipts"
IF ( PROCESSKEY = 1 ) AND   (STORNO = ´X` ) "Reverse     RESULT = -1 * TRANS_AMOUNT.     RETURNCODE = 0.ELSE.     RETURNCODE = 4.      "no update of key figure!ENDIF.
Note: For DataSource 2LIS_40_S279 the pseudo source code read as follows:
Update routine "Reversed receipts"
for 2LIS_40_S279IF ( PROCESSKEY = 1 ) AND   ( DCINDIC = H ) "Reverse     RESULT = TRANS_AMOUNT.     RETURNCODE = 0.ELSE.   RETURNCODE = 4.      "no update of key figure!ENDIF.
To be able to understand the overall scheme more comprehensively, you should have a look at the update rules of the Standard Business Content for retail or consumption goods (for example InfoCubes 0RT_C01 or 0CP_IC_C1).

EJB3: One-to-one relationships and auto-generation of primary key values...

Dear Forum,
I'm relatively new to JEE, and while I've so far enjoyed the convenience of EJB3 for most things, it seems that I have a corner case that can not be handled by the entity manager.
First, here's a quick mockup of my entities:
    Gallery
            |
            -- [1] -------[1] ----> Author
            |
            -- [1] -------[M] ---> Photo
                                              |
                                              -- [1] ------ [1] -> PhotoImage
                                                                                 |
                                                                                 -- [1] ------ [1] -> IPTCData
                                                                                 |
                                                                                 -- [1] ------ [1] -> EXIFDataI also have a remote, stateless session bean that does nothing more than persist()/merge()/remove() and locate (through find() and a few custom queries) my Gallery and Photo instances.
Now, the abridged version of my problem is this: when I persist a Photo, it naturally gets its primary key generated (I used @Id and @GeneratedValue). However, for some reason none of the other dependent entities inherit Photo's primary key value. In my client, I create a new Gallery locally and then persist it. I then create new Photo, PhotoImage, IPTCData and EXIFData instances. I add the IPTCData and EXIFData instances to PhotoImage (there are PhotoImage methods for adding those); then I add the PhotoImage instance to Photo (again, Photo has a setter for adding a PhotoImage). Then, I persist the Photo.
--- Aside: ------------
I've set up my relationships using annotations like @OneToMany (Gallery references a Collection of Photos), and @OneToOne (Photo's primary key references PhotoImage's primary key; PhotoImage's primary key references the primary keys of IPTCData and EXIFData). I've also added @JoinColumn annotations where necessary.
Finally, I get the Gallery instance's Photo collection (public Collection<Photo> getPhotos()), I add the Photo to the collection, and I add the Photo collection BACK to the Gallery (public void setPhotos(Collection<Photo>)).
At this point, the Gallery should have all of my entities contained inside of itself. However, when I persist the Gallery at this point, all of the entities show up in the database, but none of the primary keys get inherited. Photo's primary key gets generated automatically, of course, but the rest have zero (0) as their PK values. I had wanted, for example, IPTCData to get the value of Photo.id.
I had assumed that the entity manager would persist everything for me provided that I told it, through my annotations, about which entities relate to which. Does persistence only work in the direction of retrieval? That is, does the entity manager only do its thing when fetching (versus setting) data when there is more than 1 object in the graph? I can't believe that it can't, otherwise we'd all be ditching it and going back to straight SQL to do our work.
Thus, I HAVE to be doing something wrong, or else omitting to do something right.
I've made other incarnations of the above setup, and none of them have worked perfectly. I've even set up foreign key constraints in the database, but I had my share of unresolvable problems there, too.
So I guess my big question with all of this is: when you have a deeply nested graph of objects, can the entity manager figure everything out and persist all of the objects correctly and with the right values? If not, boo. If so, how does one accomplish this?
I know that I could persist each and every entity separately in my client code, but I wanted to have a natural-looking way of piecing all of my entities together. More specifically, I could persist IPTCData explicitly; however, I want to be able to add everything to a Photo and only persist the Photo itself, with the idea that all of the objects and sub-objects would be persisted automagically.
Is this possible? Or have I bought into a pipe dream with the guarantee of the proverbial magic bullet?
Thanks to everyone in advance for his/her input.
Regards,
Michael

Daniel,
Late last night I found the solution to my problem. And you're right, it had everything to do with which side is wired to which. I got confused about which side to consider the "owning" side, since one can look at it from the perspective of the database or the application.
Interestingly, the first 2 lines of your example code match my client code almost verbatim: First, I create a new Gallery (or else I get an existing one). I then create a new Photo and then add it to the Gallery's collection using add(). I then persist the Gallery. My session bean internally calls EntityManager.merge(gallery). How it differs from your example, though, is in the fact that, on an application level, a Photo has no knowledge whatsoever of a Gallery. Which is to say that my Photo class does not have a 'getGallery()' method. Somehow, Hibernate is able to figure it all out and still update Photo's 'parentIdRef' column in the database. My logs show that Hibernate issues a SQL UPDATE on the Photo after both a Gallery and a Photo have been created. It sets the Photo's 'parentIdRef' column to the primary key value of the owning Gallery.
Getting back to the matter, my problem was not with being able to map a Photo to a Gallery; rather, I was unable to add a PhotoImage to a Photo and have the relationship get correctly mapped in the database. The relationship between a Photo and a Gallery is many-to-one: there can be many Photo objects inside of a Gallery. In the database, a Photo row contains a 'parentIdRef' column whose value is that of a Gallery's primary key. I used @OneToMany on the Gallery, since a Gallery is, from an application perspective, the "owning" side, even though it's only the Photo that knows who it's referring to since only IT contains the 'parentIdRef' column in the database.
I tried setting up the relationship between a PhotoImage and a Photo in the same manner, with the PhotoImage having a 'parentIdRef' column and referring to a Photo's primary key. I had annotated the Photo's getPhotoImage() method with @OneToOne, along with an appropriate @JoinColumn.
It was THIS part that I had backwards. With a @OneToMany relationship, the child refers back to the parent --- it can be no other way. However, with a @OneToOne relationship, the owner refers to the child.
So, to make a long story short, all I had to do was create extra database columns for Photo. Those columns refer to the primary keys of PhotoImage, EXIFData and IPTCData. Concretely, for example, Photo.photoImageIdRef references PhotoImage.id. And so on and so forth.
The only negative side-effect of this is that my database-level foreign key constraints are now broken, since Hibernate wants to persist PhotoImage, EXIFData and IPTCData before it persists Photo.
I have to investigate more deeply the 'cascade=...' option of the @OneToOne annotation in order to find out it relates, if at all, to a database-level cascade.
Anyway, thanks for the reply. It seems that you had a very good idea about what my problem was. I would have posted the fact that I had resolved the problem last night, except that it was too late and I was heading to bed. If you still want the Duke points, let me know. I don't currently know the rules about if, when and to whom I should issue points in cases like these when I've already solved the problem.
Regards,
Michael

Error while deleting values of characteristic /1FB/COMPANY/Company (RFC des

Dear all,
I am trying to synchronize Company master data between local BCS system and SAP BW with UGMD_BATCH_SYNC program. In the synchronization mode, Full Synschronization (Write and Delete) was selected.
However, I receive the following error message when executing the program:
Error while deleting values of characteristic /1FB/COMPANY/Company (RFC destination )
Message no. UGMD077
Diagnosis
When writing or deleting values of characteristic /1FB/COMPANY/Company errors occurred in the system with RFC destination . As the changes have already been defined in the local storage location this results in the master data being asynchronous between the local and remote storage location.
System Response
Processing is continued.
Procedure
Carry out a manual synchronization of the master data later using report UGMD_BATCH_SYNC. You can find additional information there under Application Help.
FYI, RFC Destination for my data basis is left blank.
What may causes this error and how to resolve it?
Thank you.

Hi MontyBurns,
May I know what settings that I need to check in UGMDSYNC program? As far as I can tell, there is only one parameter that we need to specify in the program i.e. Field Name. As I am trying to synchronize from BCS to BW, I have chosen the followings settings:
Source = LOCAL
Target = ALLBW
All,
Interesting thing that I notice after executing the UGMDSYNC program is the following message:
Synchronize/Display Variances Between Systems
     The compound dependencies for the attributes or texts are not defined
     uniformly in the systems investigated.
     Example:
     Texts are defined as language-specific in the local systems and as
     language-independent in remote systems (for example BW systems). The
     same can apply for other compounds such as version or time dependencies.
System Response
     The display of differences between the systems will be affected. A
     manual synchronization will not be completely successful.
Procedure
     1. Ensure that the dependencies for the attributes and texts are the
         same in all systems.
     2. Start the synchronization process again.
Procedure for System Administration
I can check the attributes and texts in BW via RSD1 by specifying InfoObject = 0COMPANY and checking the Master data/texts and Attribute tabs. But how do I check similar settings in BCS Workbench? I can't determine whether the Company text is language-dependent or not simply by displaying specific Company from Process View > Master Data > Consolidation Units > Company.
Thanks.

SSAS report action to pass multi-value list of dimention key values to a SSRS report parameter

This was originally posted on StackOverflow and suggested I try here as well.
I want to create a report action in an SSAS OLAP cube that generates a list of formatted values to pass into an SSRS report parameter that accepts a multi-valued parameter list. This would be applied at the
cell level in the SSAS action. I have found a solution that gets me most of the way:
How to Pass Multiple Values from an SSAS Report Drill Through Action to an SSRS Multi-Value Parameter, but not quite. The action does appear in Excel and works
if I run the action from a cell that is at or below the dimension attribute I am generating the list for, in this case,
Account Key.
Below is a link to a screen capture (unable to embed it due to lack of reputation) showing the action and dimension structure in Excel. The action works as long as I run it at the
Account Key level or below. I want to be able to run it at higher levels, such as
Account Major and still have it generate all then related Account Key values for the SSRS report parameter. Running it at the higher
Account Major level does not trigger the report to run.
Excel Action Screen Shot:
http://i.stack.imgur.com/QCGSp.png
Below is the MDX I am using to generate the value for the report parameter:
UrlEscapeFragment(
GENERATE(
DESCENDANTS(
[Account].[Account Key].CurrentMember,
[Account].[Account Key].[Account Key]
[Account].[Account Key].CURRENTMEMBER.Name,
"&rp:Account="
I am hoping that I can somehow modify the MDX above to make it return all the
Account Keys for any attribute of the Account dimension when ran from any measure cell, not just when ran at self and children of
Account Key in the pivot table.
Also, if it helps, I can execute the following MDX query on the cube and get the results I am looking for.
WITH MEMBER [Measures].[Account Key List] as
GENERATE(
DESCENDANTS([Account].[Account].CurrentMember, [Account].[Account].[Account]),
[Account].[Account].CURRENTMEMBER.NAME,
"&rp:Account=")
SELECT {[Measures].[Account Key List]} on 0,
([Account].[Account Company Number].[Account Company Number],[Account].[Account Major].[Account Major]
) on 1
FROM [Company 10 Action Demo]
Below are partial results:
10.116&rp:Account=10.116.010
10.117&rp:Account=10.117.010&rp:Account=10.117.020
10.120&rp:Account=10.120.005&rp:Account=10.120.006&rp:Account=10.120.010&rp:Account=10.120.020&rp:Account=10.120.030&rp:Account=10.120.040&rp:Account=10.120.050&rp:Account=10.120.060&rp:Account=10.120.380&rp:Account=10.120.999
10.123
Questions
Any ideas what I might need to do to get Account Key to be returned for any attribute of the
Account dimension?
Would I possibly have to alter my Account dimension in the cube to get this to work?
Thanks in advance.
Edit 1 - Adventure Works Cube Version
I was unable to get the suggested answer with the "Exists" function to work. To better demonstrate this issue, I have recreated it using the Adventure Works Cube.
I will focus on the Customer dimension, specifically the Customer and
Education attributes. I created a report action called Test Report Action. Below is the XML created for it in the cube.
<Action xsi:type="ReportAction" dwd:design-time-name="f35ad5ee-5167-4fb8-a0e0-0a74cc6e81c6">
<ID>Report Action 1</ID>
<Name>Test Report Action</Name>
<TargetType>Cells</TargetType>
<Target></Target>
<Type>Report</Type>
<ReportServer>SQLSERVER</ReportServer>
<Path>ReportServer?/Test Report</Path>
<ReportParameters>
<ReportParameter>
<Name>Test Customer Existing</Name>
<Value>UrlEscapeFragment(
GENERATE(
EXISTING DESCENDANTS(
[Customer].[Customer].CurrentMember,
[Customer].[Customer].[Customer]
[Customer].[Customer].CURRENTMEMBER.Name,
"&rp:Customer="
)</Value>
</ReportParameter>
</ReportParameters>
<ReportFormatParameters>
<ReportFormatParameter>
<Name>rs:Command</Name>
<Value>Render</Value>
</ReportFormatParameter>
<ReportFormatParameter>
<Name>rs:Renderer</Name>
<Value>HTML5</Value>
</ReportFormatParameter>
</ReportFormatParameters>
</Action>
Below are the steps to re-create the issue.
Connect to the cube in Excel
Add dimension Customer -> More Fields -> Customer
Add measure Internet Sales -> Internet Sales Amount
Right-click Internet Sales Amount cell, select "Additional Actions" -> "Test Report Action" and see customer values created for URL
When the action is ran at this point with Customer, I see the values created in the URL shown message box (since there is no SSRS report server at location specified).
Now the part I'm unable to resolve
Remove the Customer dimension and add Customer -> Demographic -> Education
Right-click Internet Sales Amount cell, select "Additional Actions" -> "Test Report Action"
Nothing happens. If I ran the action on the cell next to "Bachelors", I would want it to build up all the list of all the "Customers" that make up the "Bachelors" in the
Customer dimension as part of the report parameter. If no attributes where used in the cube from the
Customer dimension for that cell, then I would like it to return "All Customers", or something similar to show that all customers are included in the aggregations.
I am not too MDX savvy, thus far. I think I need to somehow join the
Customers to Internet Sales Amount in the Generate function portion. I have tried several different combinations of the
Customer dimension and Internet Sales Amount, along with various functions to see if I could get this to work with no success. I am hoping that someone more knowledgeable the me will have a solution. If you need more details,
please ask and I will provide them.

Simon,
Thanks for you help with this. This morning I found a workaround. Below describes what that is.
What I ended up doing was getting a list of values from a degenerate dimension that I could use to pass to SSRS to get a list of transactions for a report. Below is how I did this, in relation to the Adventure Works cube using the degenerate dimension
Internet Order Details.
WITH MEMBER [Measures].[Order Param List] AS
GENERATE(
EXISTS([Internet Sales Order Details].[Sales Order Number].[Sales Order Number].Members, ,
"Internet Sales"),
[Internet Sales Order Details].[Sales Order Number].CurrentMember.Name,
"&rp:OrderNum=")
SELECT {[Measures].[Order Param List], [Measures].[Internet Sales Amount]} ON 0
,([Date].[Calendar].[Date]) ON 1
FROM [Adventure Works]
This will get a list of Sales Order Number in a text string, separated by "&rp:OrderNum=" for each measure of
Internet Sales. This would allow me to create an SSRS report to bring back detail information for each
Sales Order Number. Below are some sample results.
May 16, 2007 SO50493&rp:OrderNum=SO50494&rp:OrderNum=SO50495&rp:OrderNum=SO50496&rp:OrderNum=SO50497&rp:OrderNum=SO50498&rp:OrderNum=SO50499&rp:OrderNum=SO50500 $12,157.80
May 17, 2007 SO50501&rp:OrderNum=SO50502&rp:OrderNum=SO50503&rp:OrderNum=SO50504&rp:OrderNum=SO50505&rp:OrderNum=SO50506&rp:OrderNum=SO50507&rp:OrderNum=SO50508 $13,231.62
May 18, 2007 SO50509&rp:OrderNum=SO50510 $4,624.91
With this, I can then create a Report Action in SSRS with a Parameter Value of
UrlEscapeFragment(
GENERATE(
EXISTS([Internet Sales Order Details].[Sales Order Number].[Sales Order Number].Members, ,
"Internet Sales"),
[Internet Sales Order Details].[Sales Order Number].CurrentMember.Name,
"&rp:OrderNum=")
The way I was going about it before was flawed, as I was trying to get a list of the granular values from each dimension used to build the measure value and pass each one of those as separate parameters. I just needed to set something unique for each fact
measure transaction that represents the value and uses that in a query parameter for the SSRS report.

Display listbox key value in ALV GRID method

Hi All,
I have a program in which columns are generted dynamically based on number of fields. The column name is dynamic as it depends on its text while The value in Column's can be 1, 2, 3, 4, 5.
I am trying to display this in a list box along with the text which are maintained as fixed values at domain level.
space Walking
1       Archery
2       Boxing
3       Cycling
4       Rowing
Also I am displaying by using 'DD_DOMVALUEs_GET, looping through all the fixed values and concatenate
domvalue_l   ddtext separated by cl_abap_char_utilities=>horizontal_tab. No tab space is coming between key and value.
Also for the 1st value which is space it is not coming properly as space is condensed.
The point is that after I am putting values in the grid. The system event data changed is called where the value selected is 1 Archery and it is going to bad cells, error protocol display . I want only the 1st character. How to modify the content in the grid before the system event gets called.
Regards,
DPM

Hi,
try follow code to setup fieldcat of that DROP DOWN field.
FCAT-DOMNAME = ' '.
FCAT-CHECKTABLE= '!'.

How to get the KEY VALUE of sales order

Hello friends,
iam adding a sales order through DI-SERVER to the SAP db.after adding iam getting a key value (i,e Doc no)..i want it to display it in my frontend....can u please tell me how to display the return key value of my sales order
regards,
shangai.

Dear Shangai,
To retrieve the last Doc/Object added through DI API (DI Server is based on DI API) there is a method called "GetNewObjectCode" which can be used to retrieve the last DocCode which was added into the B1.
Please try the function for more help please look at the help files RefDI.chm which is installed with the SDK installation for B1.
Regards
Arshdeep

How to get the key values of record in ADF Read-only Form?

Hi
I am using ADF Business Component VO.
I have a search page( ADF Search Form) and I am displaying the results of the search in a ADF Read-Only Table( only few columns are shown) .Then by selecting a record and clicking on the button 'View' , I am navigating to a different page(ADF Read-Only Form) to show all the columns of the table for the selected record.
In the second page, I have one more button 'view child details'.Now when I click on this view child details button, I have to show another page(ADF Read-Only Form) which fetches the data from one of the child tables of parent record.
My idea is to create a ViewLink between the parent and child tables.( I have more than 15 child tables for a parent table).
Is there anyother way to achieve this functionality?
Please respond ASAP.
Thanks in advance.
~Sivaji..
Message was edited by:
Sivaji...the boss

Sijav,
ASAP?
Anyway - yes, you can do this with a view link. When you add the child table to the application model, make sure you actually add it as a child of the parent table instance (select the parent VO first, then use the shuttle to add it). This way, the parent->child relationship should be coordinated for you automatically. You should not need to get the key values manually.
Then, when you create the page to show the detail table, make sure you use the child table that is shown as a child of the parent table in the data control palette (expand parent table to see the child).
Hope this helps,
John

How to get the key value of a HashMap?

Hi,
I have a HashMap which obviously has key/value pairs. e.g. 1=3, 2=6 etc. I can get the value by using the method xxx.get(key), but I want to be able to get the value of the key. For example, when I have the value 3 I want to be able to get the value of the key that identifies it, in the example above it would be 1.
Is there a way to do this.
I'd appreciate any help.
Thanks,
Chris

A HashMap guarantees unique keys, but not unique values. In the following situation:
a=2
b=5
c=2
If you wanted to do a lookup based on the value, what would your lookup of 2 return? a or c?
At any rate, if you can guarantee that your values will be unique, you could always fill a second HashMap while filling the first; the second HashMap would simply have the original values as the keys, and the original keys as the values.

IMAPConnection was deallocated while key value observers were still reg....

Similar Messages

Maybe you are looking for