Imaq avi get info do not retrieve any info

Hi everyone,
I have some trouble with the vision VI IMAQ AVI get info,
everything was working well then I don't know what happened but the VI does not retrieve any information on any files, and I get the following error:
Error -1074395993 occurred at IMAQ AVI Open
Possible reason(s):
IMAQ Vision: File I/O error.
I need the framerate, Width, height and number of frame from this VI or else I cannot develop my application.
it only returns 0 on all values but the number of frames which is not correct 4294967295
I am thinking I might have broken the vision library.
Thanks for your help.

Sorry for the multiple message,
I have found why it did not work it was not the imaq get file info but the IMAQ AVI Open VI that does not like the path string given by the open/Create/Replace File VI.
If you have any idea why it would be appreciated.
Thanks.
Attachments:
Open Avi.vi ‏22 KB

Similar Messages

Could not retrieve connection info from torque connection pool

Hi,
I am using Apache Torque for making connection with my Oracle 9i server.
My Torque.properties file configuration is as follows:-
torque.dsfactory.cpm.factory=org.apache.torque.dsfactory.SharedPoolDataSourceFactory
torque.dsfactory.cpm.pool.maxActive=10
torque.dsfactory.cpm.pool.maxWait=60
torque.dsfactory.cpm.pool.testOnBorrow=true
torque.dsfactory.cpm.pool.validationQuery=SELECT 1 from dual
torque.dsfactory.cpm.connection.driver = oracle.jdbc.driver.OracleDriver
I am getting the following error:-
Caused by: org.apache.commons.dbcp.SQLNestedException: Could not retrieve connection info from pool
at org.apache.commons.dbcp.datasources.SharedPoolDataSource.getPooledConnectionAndInfo(SharedPoolDataSource.java:169)
According to me the cause of error is because of the database connection was not available in the connection pool. Or it might be due to The connection was not closed properly becuase of the some issue in the persistent layer.
My Research till now:-
Checked all the connection object properly closed in my classes as well as Torque Classes.
Do anyone have any idea regarding this error. If yes, please suggest some solution for it.
----Anurag----

Hi,
I have my complete Torque.properties file, just for the reference, I have pasted few lines from my torque.properties file. Secondly, I am using the JDBC Driver for my oracle connection & its working fine. The problem is when my application tries to access connection from connection pool, & if it finds no connection in the pool it gives error. After increasing the size of the connection in the pool, still I am getting the same error. Do you have some idea regarding this.

MM(PO) :: Not purpose any info record when PO creation

Dear Expert,
I have the problem with PO creation. Our user required to not purpose any info record information when create PO.
Because they want fresh blank PO. I don't know how to do to not activate any info record. Please advise.
Thank you in advance ^^

Hi,
If you want to delete the info record, you can set the deletion indicator with ME15 or if you want that after PO the info record should not get updated in the PO at item level in material data de-select the check box info update.
regards,
zafar

HT5487 So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "inte

So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "internet error". My Internet connection is fine with the Mac-book. It shows the iPad is listed under the Prepare logo up top as 1 but under supervise none are shown. Although it does show itself in iTunes. Also the profile I created is fresh and has no errors. We have tryed nearly everything I cna think of and online forums are not giving us to much info on this error.

A wag at this. A port issue?
"Apple Push Notification network setup
When MDM servers and iOS devices are behind a firewall, some network configuration may need to take place in order for the MDM service to function properly. To send notifications from an MDM server to Apple Push Notification service, TCP port 2195 needs to be open. To reach the feedback service, TCP port 2196 will need to be open as well. For devices connecting to the push service over Wi-Fi, TCP port 5223 should
be open."
http://www.google.com/url?sa=t&rct=j&q=ports%20ios%20configure%20ipad&source=web &cd=1&ved=0CC0QFjAA&url=http%3A%2F%2Fimages.apple.com%2Fipad%2Fbusiness%2Fdocs%2 FiOS_MDM.pdf&ei=5lXGUPCcJMXx0gH2wYG4BA&usg=AFQjCNFzINvs7ktT-6o6Q_l4Qk2HkpjtCA&ca d=rja
google: ports ios configure ipad
Try it on your home network where there isn't a lot of 'controls' -- network filtering , firewalls, etc.
Robert

Itunes will not retrieve cd info even though connected to internet

for some reason, when i open itunes now, a box opens saying that itunes was not properly installed and will not retrieve cd info until I reinstall itunes. I'm worried that if I do this I will lose all my music and playlists. I admit, I'm new to itunes/ipod, so any help is much appreciated.

Reinstalling should not lose your playlists or music, but just to be safe, make a copy of this file
iTunesLibrary.itl
Put it in a temp folder, or on your desktop. It is the database file that itunes uses. You might need to change Win Explorer to show file extensions.
I always back up that file before I upgrade or reinstall iTunes.

Where is IMAQ AVI Get Filter Names VI?

I have LabVIEW 6.1 with NI IMAQ 2.6 and NI Vision 6.0.5. I'm trying to create a compressed AVI file from a camera source, and the help file states that there's something called the IMAQ AVI Get Filter Names VI that will return the filters I can use for AVI compression. This VI isn't there in my installation, though.
Am I doing something wrong, or do I need to download something else?

Try looking in the folder C:\Program Files\National Instruments\LabVIEW 6.1\examples\Vision\2. Functions\AVI for the AVI Compressor Comparison.llb example program. This uses the AVI Get Filter Names VI. If this is not available, then you need to upgrade to Vision 7.0 in order to get the functionality to read AVIs into LabVIEW.
Hope this helps-
Julie

After downloading Yosemite, my Ps CS4 doesn't work. It says install legacy Java SE 6, but when i go ok, or, more info can not reach any point to have it!!!

After downloading Yosemite, my Ps CS4 doesn't work. It says install legacy Java SE 6, but when i go ok, or, more info can not reach any point to have it!!! What will I do?

I have similar issues and was referred to a knowledge base article support.apple.com/kb/DL1572 This seems to corrected the issue.

Content has not sent any info back to the LMS after the LMSInitialise

We created a content piece with Cpativate 3 and it looks like
the content has not sent any info back to the LMS after the
LMSInitialise. So as per the SCORM standards, the LMS marks it as
complete when the player window closes.
The content needs to send back a status of incomplete as soon
as it has done the LMSInitialise. The lesson_status = incomplete
was sent by the LMS to the content, not the other way round.
Is this because the content was delaying sending back a
lesson_status of incomplete to the LMS, so the LMS was just marking
it as complete if the content was closed too early.
If anyone has had a similar issue like this and discovered a
fix, please let me know.
Regards,
Ryan

Hi Andrew,
Thanks for the reply. We are using Saba and they have fed
back to me that they have experienced problems before using
Captivate. I am currently trying a few different settings to see if
it is on my end. I will forwqard the piece onto you soon.

The "help" is not accessing any info on Safari, Excel, Messages, etc.

When I try to access the "help", no info appears. It will show issues but not any info. The screen goes blank on my any Apple Mini. IOS 10.8.4
How do I restore it?

Sometimes just closing and reopening the Help window will clear up the problem. If it doesn't, log out or restart the computer and try again. Otherwise, you may need to delete the Help cache.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Caches/com.apple.helpd
Right-click or control-click the highlighted line and select
          Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder selected. Move the selected folder to the Trash. Log out, log back in, and test. Help pages will be slow to load at first.
If that doesn't work, the problem may be caused by network conditions. It may go away by itself, though I can't say how long you should wait.
   A persistent failure to load help data has been reported as an issue with satellite networks. Test on a different network, if possible. I've also seen at least one report that Photo Stream in iCloud can mysteriously interfere with Help. I'm not sure whether that's true, but try disabling Photo Stream, if applicable.*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Key Chain will not open any info on items

Hello all. I would be greatful to know how I can fix my Key Chain Items, Passwords, Secure Passwords etc. I can open my Key Chain but when I double click or try to open the Item info nothing happens? I have tried the First Aid but nothing? Why will the items not open in a window so you can put your password in and get the info contained in the Item???Any Help would be well recieved. DH

Try deleting com.apple.keychainaccess.plist.
Quit the application.
You need to look in your user Library/Preferences for the .plist. Either hold down the option key while using the Finder “Go To Folder” command and select your user Library in your home folder or use the Finder “Go To Folder” command and enter ~/Library/Preferences/com.apple.keychainaccess.plist. Move the .plist to your desktop.
Open the application and test. If it works okay, delete the plist(s) from the desktop.
If the application is the same, return the .plist(s) to where you got them from, overwriting the newer ones.
If you prefer to make your user library permanently visible, use the Terminal command found below.
Show User Library
You might want to bookmark the command. I had to use it again after I installed 10.8.4. I have also been informed that if you drag the user library to Finder it will remain visible.

How can I fix IPhoto when it will not retrieve any photos?

My harddrive was full so I started deleting photos from IPhoto. The appliction then froze and wanted to quit. I said no then used the empty trash from IPhoto to remove the photos. But when I closed IPhoto then restarted later I could not pull up any photos and it does not respond. I think something is missing that it is looking for. How can I get it back in sync?
PowerBook Mac OS X (10.4.8)

Applications need a certain amount of free disc space to function properly. When iPhoto crashed it damaged its database. You'll have to have enough free disc space to get it back up and running.
Try a database rebuild: hold down the Option and Command keys while launching iPhoto and see if it will give you the rebuild dialog box. If so, check the first 3 items and see if it can repair itself.
If this doesn't work, you'll have to manually rebuild your library. You'll have your photos, but albums, keywords, etc. will be lost. Post back if you need further instructions.

Get-SCStorageDisk cmdlet not returnig disk info

Hi,
We are using SCVMM cmdlet for storage provisioning needs. After provisioning the volume to one of the host in the cluster, I am not able to get that disk info on provisioned storage for a specific lun id.
ex power shell script: Get-SCStorageDisk | where { $_.SMLunId -eq $lunID}
If I rescan the disk in that cluster hosts and refresh the particular VMM cluster information, then this command is returning correct values.
I used get the value earlier without rescan. Is this known issue for this cmdlet.
is rescanning every host in the cluster is required to get the output in VMM cmdlet Get-SCStorageDisk ?
Thanks
Manohara

Hi,
We are using SCVMM cmdlet for storage provisioning needs. After provisioning the volume to one of the host in the cluster, I am not able to get that disk info on provisioned storage for a specific lun id.
ex power shell script: Get-SCStorageDisk | where { $_.SMLunId -eq $lunID}
If I rescan the disk in that cluster hosts and refresh the particular VMM cluster information, then this command is returning correct values.
I used get the value earlier without rescan. Is this known issue for this cmdlet.
is rescanning every host in the cluster is required to get the output in VMM cmdlet Get-SCStorageDisk ?

Not finding any info or tutorials on "archive and instal"

I can't get to the desktop and I've tried disk Utilities . I need more info on "archive and instal"
please

Thank you Thank you
I don't know why I have such difficulty with this site
Archive and install seems to have worked but I received a strange message on the desktop
The application Transport Monitor could not be launched because of a shared library error
"8<Transport Monitor><Transport Monitor><Hot SyncLib.PPC>"
Should I just do Disk Utilities again ?

IPod Touch does not sync any info

hey there, my problem is that my iPod Touch does not sync anything from the "info"-section shown in iTunes, neither Contacts nor Calendar nor Mail Accounts...
In contrast it's no problem with my iPod nano (1. gen).
i hope that someone can help me. thank you and excuse my shabby English. _
everytime i try to sync Contacts and so on, i get a message saying "iTunes cannot sync 'Contacts' to the iPod, because the Sync-Server can't sync the iPod" (i tried to translate the originally German message...)

Im having this problem as well and it really defeats the purpose of having a calendar on here if it won't work. Mine seems to only want to try to sync one of my 6 calendars I want to carry with me, but even then that one calendar doesn't update all events. It's very selective/random.
I also find that the odd photo album is randomly ignored. But the iCal sync is important for me. Why Apple just doesn't allow a direct link from iCal allowing multiple calendars is beyond me. If the iPod Touch is running a copy of OS X anyway, why not just make the Calendar app basically identical to iCal? And make it work!

EH4 Completed - System Status does not show any info

Hi All,
I have completed the EHP4 installation on one of our ECC 6.0 system and now when i login to SAP and click on System -- Status
it jus shows me that it is ECC 6.0 ,It does not show me ECC 6.0 EHP4 , do i need to do anything after EHP installation is over?
Regards,
Ershad Ahmed

Hi Marko,
Thanks for the reply . I checked and found that our SAP_APPL is on 604. I had another question during EHP4 application
we had to increase the DB size. Before i started the EHP when i took the DB backup our DB size was 83 GB and now when
i check it is 135 GB, is it possible for us to recliam this space. The only option which i can think of is DB Reorganization but was
not very sure. Any inputs would be of great help.
Regards,
Ershad Ahmed

Imaq avi get info do not retrieve any info

Similar Messages

Maybe you are looking for