IMAQ multiple images saves to files

I'm developing a confocal microscope with multi-axis control where I
use servos and motion controller cards for the works. I managed to
generate vivid images of semiconductor images in 2D plane (x,y) from a
Laser Diode source reflectance and optical feedback, but would like to
make slices along z-axis so that I would have completely define a
stacked image i.e. I= f(x,y,z) (hences, a 3D reconstruction from 2D
planes) in this manner I need to displace a z-motor from a range (+),
zero, to (-)in each displacement I would have then generated a 2D
image save and kept into a file. I have a problem with IMAQ VIs on how
to do this exactly when I need to repeat the steps and file saving to
a disk? Any suggestions or ideas are welcome.

Hello Bruce, this seems pretty much ok only if I have a camera in
place.But this design does not and will not use one because it is
essentially an optical imager by itself (call it a laser diode
reflectance microscope). So, the images are generated from optical
reflections converted to voltage by a Laser Diode (and its
controller). What I do is spot a surface get some light intensity on
it move the stage to another spot until I covered an area (m x n)
pixels.So, my problem really boils down to how IMAQ Vision do a
multiple save of this 2D arrays with increments on z-axis (servo
motor). Attached is an screenshot and a sample image from my set-up.
Attachments:
Code_Right_Screenshot.GIF ‏308 KB
site1_250z50.bmp ‏63 KB

Similar Messages

How do I add multiple images into one file?

I'm sure this is something that's been covered in another post (or even in the help portal) but I think my wording in my search terms are not correct or... I don't know, because I just can't find what I'm looking for.
I want to know how to add multiple images into one file/one image, both horizontally and/or vertically. To give you an idea of what I mean, check out :
http://www.best10apps.com/apps/comic-story,531596060.html
If you scroll down, you'll see a heading entitled : Screenshots of Comic Story. Notice how there's 3 pictures (divided by borders). 2 of those pictures are side by side, and 1 of them is below the first 2 pictures.
I want to know how to add different pictures/images and put them into one picture.

One way is to create template PSD files and populate them with your images using Photoshops scripts.
Photo Collage Toolkit UPDATED June 12, added Picture Package Support via PasteImageRoll and BatchPicturePackage scripts.
The package includes four simple rules to follow when making Photo Collage Template PSD files so they will be compatible with my Photoshop scripts.
There are eleven scripts in this package they provide the following functions:
TestCollageTemplate.jsx - Used to test a Photo Collage Template while you are making it with Photoshop.
CollageTemplateBuilder.jsx - Can build Templates compatible with this toolkit's scripts.
LayerToAlphaChan.jsx - Used to convert a Prototype Image Layer stack into a template document.
InteractivePopulateCollage.jsx - Used to interactively populate Any Photo Collage template. Offers most user control inserting pictures and text.
ReplaceCollageImage.jsx - use to replace a populated collage image Smart Object layer with an other image correctly resized and positioned.
ChangeTextSize.jsx - This script can be used to change Image stamps text size when the size used by the populating did not work well.
PopulateCollageTemplate.jsx - Used to Automatically populate a Photo Collage template and leave the populated copy open in Photoshop.
BatchOneImageCollage.jsx - Used to Automatically Batch Populate Collage templates that only have one image inserted. The Collage or Image may be stamped with text.
BatchMultiImageCollage.jsx - Used to Automatically Batch Populate Any Photo Collage template with images in a source image folder. Easier to use than the interactive script. Saved collages can be tweaked.
BatchPicturePackage.jsx - Used to Automatically Batch Populate Any Photo Collage template with an image in a source image folder
PasteImageRoll.jsx - Paste Images into a document to be print on roll paper.
Documentation and Examples

Writing multiple images to one file using ImageIO

I am having trouble saving and reading multiple images from to/from one file. Here is the best i can come up with:
//this is utilizing an ObjectOutputStream because i need to also save some objects to the file
ObjectOutputStream oos = new ObjectOutputStream(new FileOutputStream("C:\\images.dat"));
oos.writeInt(ImageTable.size());
for(int k = 0; k < ImageTable.size(); k++)
    ImageIO.write((BufferedImage)ImageTable.get(k), "png", oos);
    oos.flush();
//////////////////////////read function/////////////////////////
ObjectInputStream ois = new ObjectInputStream(new FileInputStream("C:\\images.dat"));
int size = ois.readInt();
for(int k = 0; k < size; k++)
    ImageTable.add(ImageIO.read(ois));
}What it seems to do is read the first image and then place the marker at the end of the file so each consecutive calls to reading the file end up in either null, -1, or an EOF exception (bleh). Does anyone know how i can do this properly?
The code does run and saves something, although it is hard to tell exactly what it is saving since it is all in png format, it also loads the first image properly.

Is it possible to pack the different images in one big image?Conversely, some image formats let you store multiple images in a single image file.
Here's a demo. My results are that I don't have a gif writer, tiff can write sequences (this
is a well-known tiff property), I can trick (?) jpeg into stroring multiple images and I
can't get png to work: three images go in, one comes out.
import java.awt.*;
import java.awt.image.*;
import java.io.*;
import java.net.*;
import java.util.*;
import javax.imageio.*;
import javax.swing.*;
import java.util.List;
public class MultiImageTest {
    public static void main(String[] args) throws IOException {
        URL url1 = new URL("http://today.java.net/jag/bio/JagHeadshot-small.jpg");
        URL url2 = new URL("http://today.java.net/jag/bio/JAG2001small.jpg");
        URL url3 = new URL("http://today.java.net/jag/Image24-small.jpeg");
        BufferedImage[] images = {ImageIO.read(url1), ImageIO.read(url2), ImageIO.read(url3)};
        display(images, "original", 0, 0);
        String[] suffixes = {"gif", "jpeg", "png", "tiff"};
        int x = 30, y = 20;
        for(int j=0; j<suffixes.length; ++j) {
            String suffix = suffixes[j];
            try {
                writeFile(images, suffix);
                display(readFile(suffix), suffix, x, y);
                x += 30;
                y += 20;
            } catch (Exception e) {
                System.err.println(suffix + ": " + e.getMessage());
    static void writeFile(BufferedImage[] images, String suffix) throws IOException {
        Iterator ws = ImageIO.getImageWritersBySuffix(suffix);
        if (!ws.hasNext())
            throw new IOException("no writer for: " + suffix);
        ImageWriter w = (ImageWriter) ws.next();
        File file = new File("temp." + suffix);
        file.delete();
        w.setOutput(ImageIO.createImageOutputStream(file));
        if (w.canWriteSequence()) {
            System.out.println("Using writeToSequence for format " + suffix);
            w.prepareWriteSequence(null);
            for(int j=0; j<images.length; ++j)
                w.writeToSequence(new IIOImage(images[j], null, null), null);
            w.endWriteSequence();
        } else {
            System.out.println("cross fingers for format " + suffix);
            for(int j=0; j<images.length; ++j)
                w.write(images[j]);
    static BufferedImage[] readFile(String suffix) throws IOException {
        Iterator rs = ImageIO.getImageReadersBySuffix(suffix);
        if (!rs.hasNext())
            throw new IOException("no reader for: " + suffix);
        ImageReader r = (ImageReader) rs.next();
        File file = new File("temp." + suffix);
        if (!file.exists())
            throw new IOException("no file: " + file.getName());
        r.setInput(ImageIO.createImageInputStream(file));
        List images = new ArrayList();
        for(int j=0; true; ++j) {
            try {
                images.add(r.read(j));
            } catch (IndexOutOfBoundsException e) {
                break;
        return (BufferedImage[]) images.toArray(new BufferedImage[images.size()]);
    static void display(BufferedImage[] images, String title, int x, int y) {
        JPanel cp = new JPanel(new GridLayout(1,0));
        for(int j=0; j<images.length; ++j)
            cp.add(new JLabel(new ImageIcon(images[j])));
        JFrame f = new JFrame(title);
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.getContentPane().add(new JScrollPane(cp));
        f.pack();
        f.setLocation(x, y);
        f.setVisible(true);

Batching multiple images - save for web?

i'm new to elements 9 on my mac & was wondering if there is a way to save multiple images for web? the only thing i've come across in the program is one image at a time. thx

Hello,
There isn't a way of sending multple images through the Save for Web dialog box. But there are ways of working with multiple files that may accomplish the same, it just depeneds on exactly what you are looking to do. For example, if you are only looking for a way to turn a bunch of PSD, TIFF, or RAW files into a internet compatible JPEG, that can be done via File>Process Multiple Files. From here you can take a folder of images and convert them to another format such as JPEG (you can do other things too, like resize, rename, perform autofixes).
-Brett

How to increase the camera download speed and save binary file speed

My camera is pco dimax S1 camea. The interface is cameralink Base.
The memory is on board.
I use 1000fps@480*480 resolution to capture 1 sec.
Then download the images from the on board memory to computer.
The board in the PC side is NI-1429 board.
Theory, the cameralink transport speed should be 250MB/S
In the file format, file size should be (480(H)*480(V)*16bit*1000fps)/8=460.8 MB
Logically it should be download complete under 2 sec
But in my program, the real download speed at about 40 framess/s, (480*480*16*40)/8=18.432 MB/S
(250MB/S)/(18.432MB/S)= 13.85
The download speed is totally slower 13.8 times.
I use the SSD and RAID 0 to save the file.
I did some test as below:
1. Try to save png or binary file. The speed of binary had a litter faster, but it still doesn't close the 250MB/S.
2. I try to adjust the resolution from 16bit to 12bit or 8bit to save the image. The download speed still 40 frames/s(18.432MB/S)
3. I try to use IMAQ Sequence to save the file, but how to add in my program, can anyone help me?
On the other hand, I also guess may be the structure of my program have an problem cause the download and save speed slow.
Attached please find the program.
To see if there are other ways to increase the speed of file written!
Attachments:
Imagesavebinary.vi ‏91 KB
test.png ‏157 KB

You have to separate your step1 and step2 into two parallel loop.
If you put the two tasks in one loop, the lower speed task will affect the loop speed.
So that the program won't achieve the top speed.
Is continuous acquisition required for your application? Can sequence acquisition or finite acquisition be your workaround?
The memory handling in continuous acquisition is way a lot more difficult than finite acquisition.
I would suggest you to figure out how finite acquisition work and then jump into the continuous acquisition application.

Show file size in Cell Extras? (Either Compact or Expanded, or anywhere in Grid for multiple images simultaneously)

I've searched and seen several suggestions saying to change Metadata to Exif & IPTC to see the file size, but that's for only one image at a time. Under Cell Extras (both Compact and Expanded) I see options for Megapixeps, Cropped Dimensions, File Name, Extention, and a bunch of other options, but no file size. I suspect this is because file size isn't a metadata field and simply a file attribute (that may be incorrect, but regardless...) is there really no way to have file size visible in the thumbnail cells in Grid view in the Library? I'm trying to reduce redundancy and viewing file size of multiple images at a glance based on my Library Filter criteria would be a huge help. Thanks to anyone who can help sort me out!

Sure. I have a catalog with 22,000 images indiscriminately imported from hundreds of folders and multiple drives from this year alone (partially lost a RAID array to a corrupt index and recovered a dump of the files so I'm terribly disorganized juggling emergency redundancy backups wherever I had 50 gigs here, 100 gigs there, and working to clean up and organize my photos one year at a time ), including raw, jpg, websized jpg, png, tiff and psd (flattened and with layers/adjustments) and am now trying to identify my keepers and delete unnecessary files. I have 22 terabytes of personal files and photography spread chaotically and while I now have proper discipline when saving variants, I didn't always and want to remove unneeded, rejected, and duplicate images. I don't expect to be caught up for months or longer depending on my free time and sanity. Unfortunately, it's not as simple as keep the raw delete the rest. Sometimes I have multiple PSD documents with different version names and edits, sometimes with multiple layers, and I have to use a variety of information to identify which one is indeed the correct one to keep...or open them all/both.
Often, file size can be an indicator for me and aids in making the decision more quickly. For instance between 2 psd files with the same Megapixles I'm often able to identify the flattened version vs the layers intact version by file size if it wasn't properly noted in the filename, which unfortunately due to a combination of bad or evolving practices and being tired or rushed happens more often than I'd like to admit. One I just came across that brought me here searching was 3 similarly named and appearing PSD files of a panorama, all with the same MP/dimensions. One was flattened, one was the original stitch, and one was flattened with a few masks, adjustments, and an extra layer, and being the one I'd want to keep. Filesize helped me quickly identify which was which. Also sometimes dimensions are misleading, like when a panorama is first created and uncropped, its dimensions are larger, but a tighter cropped image with multiple layers and a larger file size indicates to me that it is newer and more finished, even though smaller dimensions typically indicates a crop and may not be a 'master' copy. Additionally, 2 images with different names but the exact same file size are very likely duplicates (at least in my workflow) but 2 similarly looking images with the same dimensions could be retouched/not, sharpened/not, have noise reduction/not, and I'd have to view them in detail to determine if they were in fact identical. For my purposes (since these are my personal fine art images & I have the raw files incase I occasionally mess up) I'm often willing to trade an educated guess for my time. Seeing identical file sizes on 2 apparently similar images is good enough for me to delete one.
I can select them individually and check...it's not a horrific problem. But it would save me time so I was hoping I had simply missed how to view that. My reasoning is 'why not' have the option available with all the others? Me personally, I don't care about megapixels when I already have the dimensions, that's just redundant and honestly much less helpful than LxW. File size would be an additional tool I would use, though. There are other examples but the main thing is that I do spend time checking filesize, and specifically when comparing multiple images, so having it displayed in the cell would be a time saver for me.

To convert multiple image files to pdf using pdfsharp in C#

Hey guys I have this C# code to convert any image file to .pdf using pdfsharp.dll. But I want to select multiple images for conversion please help. here's my code (plz note enable pdfsharp.dll in the reference)
usingSystem;
usingSystem.Collections.Generic;
usingSystem.Linq;
usingSystem.Text;
usingSystem.Threading.Tasks;
usingPdfSharp.Pdf;
usingPdfSharp.Drawing;
usingSystem.IO;
namespaceConsoleApplication1
classProgram
staticvoidMain(string[]
args)
PdfDocumentdoc =
newPdfDocument();
doc.Pages.Add(newPdfPage());
XGraphicsxgr =
XGraphics.FromPdfPage(doc.Pages[0]);
XImageimg =
XImage.FromFile(source
path...);
xgr.DrawImage(img,0,0);
doc.Save(destination path...);
doc.Close();

try this one
public string CreatePDF(System.Collections.Generic.List<byte[]> images)
dynamic PDFGeneratePath = Server.MapPath("../images/pdfimages/");
dynamic FileName = "attachmentpdf-" + DateTime.Now.Ticks + ".pdf";
if (images.Count >= 1) {
Document document = new Document(PageSize.LETTER);
try {
// Create pdfimages directory in images folder.
if ((!Directory.Exists(PDFGeneratePath))) {
Directory.CreateDirectory(PDFGeneratePath);
// we create a writer that listens to the document
// and directs a PDF-stream to a file
PdfWriter.GetInstance(document, new FileStream(PDFGeneratePath + FileName, FileMode.Create));
// opens up the document
document.Open();
// Add metadata to the document. This information is visible when viewing the
// Set images in table
PdfPTable imageTable = new PdfPTable(2);
imageTable.DefaultCell.Border = Rectangle.NO_BORDER;
imageTable.DefaultCell.HorizontalAlignment = Element.ALIGN_CENTER;
for (int ImageIndex = 0; ImageIndex <= images.Count - 1; ImageIndex++) {
if ((images(ImageIndex) != null) && (images(ImageIndex).Length > 0)) {
iTextSharp.text.Image pic = iTextSharp.text.Image.GetInstance(SRS.Utility.Utils.ByteArrayToImage(images(ImageIndex)), System.Drawing.Imaging.ImageFormat.Jpeg);
// Setting image resolution
if (pic.Height > pic.Width) {
float percentage = 0f;
percentage = 400 / pic.Height;
pic.ScalePercent(percentage * 100);
} else {
float percentage = 0f;
percentage = 240 / pic.Width;
pic.ScalePercent(percentage * 100);
pic.Border = iTextSharp.text.Rectangle.BOX;
pic.BorderColor = iTextSharp.text.BaseColor.BLACK;
pic.BorderWidth = 3f;
imageTable.AddCell(pic);
if (((ImageIndex + 1) % 6 == 0)) {
document.Add(imageTable);
document.NewPage();
imageTable = new PdfPTable(2);
imageTable.DefaultCell.Border = Rectangle.NO_BORDER;
imageTable.DefaultCell.HorizontalAlignment = Element.ALIGN_CENTER;
if ((ImageIndex == (images.Count - 1))) {
imageTable.AddCell(string.Empty);
document.Add(imageTable);
document.NewPage();
} catch (Exception ex) {
throw ex;
} finally {
// Close the document object
// Clean up
document.Close();
document = null;
return PDFGeneratePath + FileName;

Multiple image upload with save to database problem

I am developing some backend work for a client, and we recently used the Multiple image upload with save to database wizard without a problem. A few days later, we noticed that we could only upload a single file at a time - it seems that the coding is no longer able to access the flash part of this and is using the javasript function instead. I know the web hosting company has made some changes on the server, and I did some reearch and it seems that there could be an issue with Flash 10, but has anyone else experienced anything like this? Any help is greatly appreciated.
Thanks.
Jeremy

Thank you for the responses. I have already updated awhile ago, so I am wondering what happened. Not sure if during the server update, some files were replaced (unless I totally forgot to update to 1.0.1 on this site). So I reinstalled 1.0.1, deleted the includes folder from the server and uploaded my includes folder and it now works again.
Again, thanks for the help.
Jeremy

Multiple Image Upload with Save to DB - any help would be appreciated

Hi - I'm running into the following issue when using the Multiple Image Upload with Save to DB behaviour.
When I click the link to upload multiple files, I am given the list of local files to choose to upload. No problem here - I can select multiple files.
When i select choose, the uploader shows the progress but hangs at 0%
However (if I cancel the uploads), the first image of the group is uploaded and it's corresponding database entry is entered correctly.
Anyone else have this hangup? If so how did you get around it?
Thanks!
Dan

Just thought I would update.
The problem seems to be related to redirecting.
I had specified a redirect page, which of course stops the flash file from continuing to upload images after the first one.
Anyone know how to change this so when the flash uploader finished it goes back to a list page?
Thanks again.

Multiple image upload with save to database wizard problem

hi,
i need to upload multiple images (6) in a table called pictures. i will need the names stored in the database and the files uploaded on the server. since i am new to dreamweaver i can not figure out on how to make this work.
the multiple image upload wizard uploads the images fine and creates a subfolder with the right id but i have no file names in the database at this point. i tried the multiple image upload with save to database wizard but i only get one upload button. it worked fine with one image but i need 6 pics uploaded. the i tried to first upload the pictures with the multiple image upload wizard and use the update wizard to add the names afterwards but that did not work either. hmm. would be great if someone could help me out.
thanks, jan

Thank you for the responses. I have already updated awhile ago, so I am wondering what happened. Not sure if during the server update, some files were replaced (unless I totally forgot to update to 1.0.1 on this site). So I reinstalled 1.0.1, deleted the includes folder from the server and uploaded my includes folder and it now works again.
Again, thanks for the help.
Jeremy

Multiple Image upload with save to database

Hi everyone,
I wonder whether anyone can help me, I have been trying to use the multiple image upload with save to database wizard. When I create the page and upload it and then view it in Safari the only thing that is on the page is an upload button. When I press the upload button I am able to browse my files and select them. When this window closes a flash loading value is shown but no images have been uploaded.
Am I missing anything? I have had no problems uploading single files and creating albums. I want to create an online gallery so that I can do a multiple upload to a specific album if this is possible.
Cheers
Sarah

Hi Sarah,
>>
but only the filename appeared in the database and no other information was stored.
>>
that´s how it´s been designed also in the "single upload" -- the path_to_the_folder where the files sit in have to be determined elsewhere
>>
{wedimg_idalb}
>>
I don´t see any reference to this "dynamic data" placeholder in any of your table columns you posted -- where does this one come from ?
>>
1. I have multiple clients and each client has their own set of images.
2. Each set of client images must be linked to an album via the album ID
>>
do you have any "foreign key" which is related to the user_table´s ID in order to make user ID 2 upload his images in album ID 2 ? How will the upload page "know" where the images are going to be uploaded to ?
>>
and the album page, wedding_alb
>>
to my mind *this* table would itself need a foreign key to the user_table in order to "map" record 2 to user ID 2 -- or do I miss something ?
Günter Schenk
Adobe Community Expert, Dreamweaver

Multiple Image Upload with save to database not working in IE anymore

Since updating IE to SP3 ADDT Multiple Image Upload with save to database does not work anymore in IE. It will show a regular file upload field, an does not allow selection of multiple files. It does work in Firefox, but not all my clients use firefox.
PSE Advice.

I would consider buying some pluggins from dmxzone.com. They
may cost a
bit upfront but in the long run, you've probably be saving a
lot of
headaches.
http://www.dmxzone.com/
If time's an issue, with these plugins, you could probably
be up and
running in a half hour. George has some really nice pluggins
for
Dreamweaver and well worth the money.
Peter Raun wrote:
>
I am going crazy here
> I will see if i can explain my problem here. . .
> I am trying to use the multiple image upload with save
to database function in
> the developer toolbox, and it work just fine, it lets me
select where to store
> the filename in database and where i want to save the
actual image on the
> server. It is wery easy to use if you just want these
functions.
> But i would also like to give every image a gallery id
in the database, so i
> can sort them out afterwards, its not whery smart to
upload a lot of images to
> a folder, and in the database you just have an image id
and an filename, i cant
> sort them into galleries with these to collums. . . . So
i guess i have to do
> something with the "additional fields" when i am
creating the server behavior
> but i cant figure out what to do?? i would have liked if
i could have made an
> list/menu with all of the availible galleries, and chose
the one that i whould
> add images too and then that gallery id whould be added
to those images in the
> database.
> I have also tried to pass on an url parameter and then
use that as a default
> value in the "additionel field" section but without any
luck at all. . . I hope
> someone here has an idea, that could help me out. . .
> It is sooooo easy to do this, when you are uploading ONE
image at a time, i
> cant figure out why it has to be sooooo hard when using
"multiple image
> upload"
>

How do I stop iWeb outputting multiple image files? It makes my site slow!

I'm a professional web designer (but don't let that put you off) who uses Dreamweaver and also handcodes HTML & CSS websites at work on a PC, but having got a new Mac for home use I thought I'd give iWeb a go for a personal site hosted on .Mac, showcasing my music and film efforts, that I didn't want to have to think about coding.
I've built a short little site using the attractive 'Travel' theme, just 5 or 6 pages so far, and have not yet added any multimedia content. However, it seemed to take ages to upload it when I published it to .Mac. So then I went to view it, and it was soooo sloooow to download each page, even on my 4mb cable connection. I know it's a fairly graphically-rich theme, but still!
I noticed that it was redrawing the navigation menu each time... and upon close inspection of the HTML code using Safari's 'View Source' to my horror I found out that that each page has a seperate '_files' folder that contains multiple versions of files that are also used in other pages - including navigation buttons and background images. I also saw that every element has styling applied to it 'inline' in the code, rather than in a single seperate style-sheet.
To confirm this I published it to a folder on my hard drive and checked it all out. What a mess!
As a WYSIWYG web page editor iWeb is great but it's an undisputable fact that the HTML markup and CSS code it produces is absolutely appaling. What's worse though is that it also renders whole swaithes of text as images and that it does create seperate folders for each pages content including images, CSS code and navigation buttons - so even though the same images and code are used throughout the site for the background and buttons and layout, they are written out as seperate files and have to be reloaded with every page!!!
This means that the .Mac server must be getting hammered and webpages are very slow to download and slow to render in Safari - it's almost like dialup when I'm viewing my iWebsite, and like I said, I've got a 4mb cable connection!
Looking at the code iWeb produces, it is good to see that tables are not used for layout, and that's one thing in its favour. But surely the whole point of providing 'themed' templates for users is that the same content is used across the site and therefore doesn't need to be created multiple times - one of the benefits of using CSS stylesheets. Why doesn't iWeb create a single stylesheet and make efficient use of repeated images instead of creating multiple instances of the same file for each page?
Perhaps there is a setting somewhere I've missed. If so, let me know someone!
It is a great WYSIWYG editor, but behind the scenes it's not efficient, it's not clean and simple and it's certainly not attractive - and I'm surprised at that coming from Apple! I know iWeb is a great tool for beginners and I'm a picky professional, but if I was Joe Public First Time Web Designer I'd be very annoyed by this.
Clean it up and sort it out Mr Jobs!
PS: Also, where does iWeb store the website whilst it's in production? I can't find it anywhere?

Your iWeb Site is stored not on your iDisk, but on a file named Domain.sites in your ~/Home/Library/Application Support/iWeb/ Folder.
If , for whatever reason, you wipe your HD and/or lose this file (Get a new computer, Re-Install your OS, Stolen Laptop, Crashed HD, Etc.) without backing-up your Domain.sites file then you will have to re-build your iWeb sites from scratch again.
Of course you can edit your Published HTML files in a different program such as Dreamweaver or even Text Edit. You just can't edit Published HTML files in iWeb. Not at this time at least.
Use iWebBackup to backup your Domain file to a Blank CD or DVD. Backing up your Domain file to another folder on your computer is not fully backing it up. If your computer gets stolen you still lost the file but if you have your Domain file burned onto a CD you have a backup!
Download iWebBackup Here
You can use iWebExtender to automatically consolidate your files into one folder and delete multiple images.
http://iWebFAQ.com

File associations in Bridge CS4 for multiple images

After a "cache purge" my file associations got altered. I can go into Edit>preferences> file associations and change that to photoshop; but if I click MULTIPLE images in Bridge and right click "open with" I only get Illustrator as an option. How can I change this to photoshop as a default when trying to open MULTIPLE images?

Ronald Keller - thank you. I am practically in tears laughing about how something so completely simple has had me fretting for days. Could it be my over 60 mind has completely failed me now, or is it I am just a bit rusty on using my software? Anyway, thank you for taking the time to offer up this response!

In the new iphoto app, why can't i save multiple images to camera roll at once?

why can't i save multiple images to camera roll at once? it seems i can only save one at a time and its very frustrating..
the options seem to be there, they are just greyed out and i cant click on them.
at first i thought its because the images were too big, so i tried it with smaller images but same thing.
APPLE HELP!

I can confirm @khaniff's original post the option in iPhoto for iOS is greyed out in conflict with the referenced article that follows:
Save to the Camera Roll
Tap a photo, album, or event and tap .
Tap Camera Roll.
Confirm or change the photos you want to share by tapping an option.
Select all the photos in an album or event: Tap All.
Select a range of photos: Tap Choose, tap Range, tap the first and last photos in the range, and tap Next.
To use your photo in another app, open the app and select the Camera Roll album.

IMAQ multiple images saves to files

Similar Messages

Maybe you are looking for