IMessage issues for new IOS

If you are having problems with iMessage with the new IOS - try these:
- make sure your number is in your contact list and saved as an 'iPhone' not 'mobile'
- make sure all your iPhone contacts are saved as 'iPhone' and not 'mobile'
- turn iMessage off, switch phone off and then turn phone and iMessgae on again.
Cheers

MichelleRC,
If you don't succeed with one rep, call back again. I'm sure you don't want to sit on the phone and explain the situation again, but it seems like giving you an extra GB to hold you over until you account cycles isn't asking Verizon for a lot. I've had them do such courtesies for me when I've gone over and it was completely my own fault. Seems like you may have just gotten an unfriendly representative. I'd try calling back again and explain the situation. Something tells me that if you happen to get a decent rep, a one time bump of an extra GB should be something they could easily do. Good luck and let us know how it works out.

Similar Messages

Why can't I find/access my recent downloads and imessage with the new IOS software update?

I just recently updated my phone to the new IOS 7 software. I had to do this using my computer. It updated ok but now when I try to find apps that I downloaded (from the computer again) I am unable to locate them. I did find one app that was downloaded but when I click install nothing seems to be happening. I have turned the phone off and on several times hoping it would reset but nothing. I am also unable to access imessage for some reason. Help!!!

You can't update your iPad past iOS 5.1.1
Many iPad 1 owners reported slow downs with iOS 5.
Under the Settings app, General category under About, how much storage capacity does your iPad have left?
You could try a hard restart or reset by holding down the sleep/on-off button and home button simultaneously.
Once the screen goes black, wait about two seconds, then let both buttons go.
See if this changes anything.
Good Luck!

IMessage with the new iOS 6.1

I updated all of the devices associated with my Apple ID to the new iOS 6.1. I have two iPhones, a new iPad 3 and an iPad Mini. My personal phone number is the number associated with my Apple ID. The other iPhone is an add on for my mother.
I used to be able to get iMessages that were sent to my iPhone number forwarded to both my iPads. After the upgrade, my iPads had the phone number changed from mine to my mother's, even though my mother's phone number is not associated with my Apple ID.
I've been fiddling with all the devices all evening and have managed to get my mother's phone number off of my iPads.
Now it appears that I can only use iMessage with email accounts. It was very useful the other way. I'm not sure that iMessage on my iPad will be useful at all anymore now that I cannot receive messages that were sent to my phone number.
Is there anyway to get that feature back, or has it been changed on purpose?

Ok guy the solution i have found is to get the phone that is associated with the number that you do not want on your device and then go into the messages setting under settings, general, messages. Then go into send and recieve. You will then notice that the apple id is your apple id. This needs to be changed to a personal apple id/icloud account. This should be unique for each phone. Once this is changed the second number on your current phone will disappear. On the solution with the ipad... I would sign out of your apple id account and then sign back in... this should reset the imessage account...Hopefully this helped....by the way my situation was that i was recieving my moms texts and facetime calls because i inadvertantly signed into my apple id on her messages and facetime rather than her icloud. It is still possible for her to use your apple id on app store things but use a unique icloud account for things like backup, facetime, imessage, etc... Good Luck

Credit Limit Issue for new customers

Dear Experts,
Iam ABAPer and recently shited to SD.
I have a issue with credit limit check for new customers.
For example, Credit control team set Rs1000 limit for new customer.
Core team created Sales Order with Rs 3000 and they created subsequent documents successfully like Delivery and Invoice.
System not performing any credit checks before making Delivery note means not showing in VKM1 tcode.
After creating first invoice for the new customer and system is checking credit limit for all the Sales orders whcih were created after first invoice (Billing).
Can you please help me how to overcome this issue.
Note: Credit Control Team dont want to use VKM3 tcode to release the order.
Thanks
Shaik

Hi Shaik Basha,
--Go to T.Code XD02 for customer & check in Sales Area under Billing Tab whether Credit control Area is assigned or not.
--Check in T.Code VOV8 & select your Sales Document check whether credit limit & credit group is assigned or not.
--Go to T.Code OVAK u2013 Assign check credit-D Automatic credit control & credit grouyp -01 for credit group for sales order.
--Go to T.Code OVAD u2013select your delivery document & Assign delivery credit group-02 & 03 goods issue.
--Go to T.Code OVA7 u2013 select your item category & check mark credit active.
--Go to T.Code OVA8 u2013 Automatic credit control u2013 Double click on the line items & check which credit type are use using Static or Dynamic credit
--Mention B for Error message as reaction & check mark on the status block.
--Now Raise Sale Order in VA01 & check the process.
Please let me know if your problem is solved
Regards
Pradeep

Looking for new ios

when does the new ios 6.x update come out(after ios 6.1.3)

Only speculation, no concrete news about it. It is almost implausible to tell the date, only the top level executives working at Apple would know.

Unable to view pdf - initially thought to be user / OS issue for new user to MAC.

Unable to view pdf created in Live Cycle Designer ES2. I initially thought this was a user / OS issue when I created a document for someone who is new to a MAC laptop. She could not view the document through email. Unfortunately, I began seeing the same error in my own document folders when searching for another document showing as icons instead of a list. I can open the file without a problem although I see the error she sees only while viewing the icons in my folder. I am using a Windows 7 PC. Now, I also know that if the document is downloaded, it can be viewed.
Other notes:
If trying to access the form via the internet, the same error is seen through Chrome, Firefox, and Mozilla but NOT through IE
Everyone seems to have the latest or a very recent READER
The form is compatible with Reader versions 7 and up
Again, downloading from the internet to the computer appears to allow the file to open properly
Document cannot be viewed on the Galaxy Tab 2 via Chrome or the pre-installed Internet Browser, nor can it be viewed through the Reader after download to tablet. I did not try on an Apple iPad.
All parties involved are up-to-date with virus protection.
Below is a link to the exact message received when trying to open the document.
https://www.dropbox.com/s/wmjqzwyriovg9vi/Adobe%20Error.pdf

Sorry, this is a user to user forum and we're just customers who help out when we can, so things don't always happen right away.
Reader, Regardless of OS or device, is as the name implies, only a Reader. There are different mail settings between Mac Mail Outlook and Thunderbird as well as Andsroid's mail app, whose name escpoaes me.
Have you checked in the Live Cycle Forum? There are people there with FAR more experience using LC developed forms. It's part of my Creative Suite, but I've never even opened it myself.

Windows 7 bootcamp issues for new iMac 27

I bought an iMac 27 on Friday. Have used bootcamp on an older mac previously with no issues. I've tried now for several days to instal windows 7 without success. I've tried to 32 and 64 bit versions and both lead to either a blue or black screen freeze. I've also tried deleting the ATI.sys file but this also hasn't worked.
Would appreciate a walkthrough of how I can sort this (please put it in
Laymans terms as I am not particularly systems literate.)

Can only suggest starting with "iMac Black Screen"
http://support.apple.com/kb/TS3173
http://www.pcpro.co.uk/blogs/2009/10/26/how-to-install-windows-7-onto-the-new-27 in-imac/comment-page-1/

Intermittent OWA authtication issue for new users on Exchange 2007

Hi
We are experiencing a strange issue with OWA authentication and its happening with new users only including me. We are a small organization with approx. 70 users. Issue is with
new user accounts only.
Access to OWA stops working from any machine for the new users also they get authentication error on their phones. I have checked permissions on Virtual Directory on exchange server,
all seems to be in place. I have checked event viewer but it doesn't have any event for auth. failure.
IIS logs have the following Message,
2014-02-05 09:37:28 W3SVC1 (EXCHANGE SERVER IP) GET /owa/ - 443 myusername 77.88.97.134 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko
401 1 1326
Server details
Server 2003 Ent. x64 R2
Exchange Server 2007 Version: 08.03.0342.000
IIS 6.0
Rebooting the exchange server resolves the issue sometime for 2 days sometime for 3-4 weeks.
Please advise.
Best Regards
Prabhash

Hi,
According to your description, new users cannot login OWA .
And to narrow down the cause, I recommend the following troubleshooting:
1. Check if the option"User must change password on next login" has been selected for the new users.
2. Check if the new users can login Outlook when the issue happens.
3. Check if it’s configured to use Integrated Windows authentication for OWA web site:
http://support.microsoft.com/kb/871179
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Pacman issues for new installation

Hi Folks,
New to Arch. Core x64 iso. Carried out the installation okay using the Beginners guide wiki.
Having trouble with pacman to the point it is driving me bananas. This is the Post installation part of the beginners guide we are talking about, so there is no GUI involved.
Network is fine. Unchecked mirrors in the mirrorlist near to my location. Run the following without any errors.
# pacman Syy
So chosen mirrors are okay so now we go on to update the system.
I ran # pacman -Syu
upgraded pacman on the first run as expected, and was asked to run pacman-key --init. Run up against the message...
Not enough random bytes available. Please do some other work to give the OS a chance to collect more entropy.
System hung there. Had to force reboot (Ctl Alt Del).
After a reboot, tried running pacman -Syu again. This time it pulled a lot of upgrades. I continued with the proposed up grades only for each to fail with a generated key failed message.
Went over to windows and a VM, and went through the installation there to see if I could get a fix.
This time system is 32 bit 686. went through same procedure. got to the same point with the same error message.
Googled and found this post...https://bbs.archlinux.org/viewtopic.php?id=128340.
There are a number of proposed solutions. None of which seemed to apply to GUI less new installation.
While system was hung looking for more entropy, I started entering numerous Ctl^X inputs at the keyboard. After a while it completed. I ran pacman-key --init again and and it seemed to complete okay. No errors any way.
So I then issued the command pacman -Syu again.
This time it downloaded a s*** load of updates, Checked the downloads, cant remember the exact details. Then came up with the message no packages were installed due to files being duplicate or conflicting.
There were numerous updates. How can I do the first time update. Help required. Remember no GUI.

Sorry for the delay in replying.
Okay, I moved locale.sh to tmp and renamed locale.sh.old
run the updates, there were errors, but since I was on a non GUI console, couldnot scroll back to see what messages the errors produced. There was a kernel upgrade in the package list. On reboot, system couldnot find the filesystem or kernel or boot partition. System is now goosed.
Reading more from wiki and threads posted here. I decided I needed the latest snapshot. Also read somewhere that the best idea was to do a network install.
so I started again with a new network install. Went okay or so I thought. Remember I am in the installation here. Downloaded the packages for just a basic core set up.
When the installation began installing the packages, the PgP signature problem raised it's head again. Now this is the installation procedure here over the network with the latest snapshot...
archlinux-2012.03.07_14-30-01-netinstall-i686
All I ahve done is let the installer run, selecting source, set location and time, prepared the hard disk. I choose grub, configured the network okay. The installation process then downloaded the core files but installation failed.
Messages...immediately after download.
Checking package integrity
Warning: Public keyring not found; have you run pacman-key --init
Error: linux-api-headers key F999...blah..blah unknown
Error: key F999...blah..blah could not be looked up remotely.
All other packages have similar errors, the procedure finishes with the following...
Error failed to commit transaction (invalid or corrupt package (PGP Signature))
Package installation failed.
What is going on? This is the installation process, no way to access the filesystem as yet, not that I know of anyway.
Other people installing Arch over the network must be experiencing the same problem.
Does Arch actually work
Running install on VMWare on Windows.

Single Sign on Issue for new Portal Users

We are implementing ESS on EP 6.0. the architecture is like EP 6.0 - ITS - R/3.
and we want to implement the single sign-on. so that when the users login the portal, the Portal Authenticates the user and then portal uses just the Portal UserID and logs in ITS/R3 without verifying the SAP PWD. Portal ID and SAP ID are same.
The single sign on is working fine for those users who already have an SAP ID.
we need to create new R/3 ID's for the new employees. and we don't wanna let the employees login in directly to R/3.
When we create a new ID in R/3 and login for the first time in R/3, it asks to change the password.
since the new employees won't be using R/3 and they login through portal and b'cos we implemented single signon, the portal tries to login in r/3 using the Portal ID/R3 ID, but the SAP R/3 ID is not actived since the user did not change the password, the SSO is failing.
We didn't wanna assign the R/3 ID a password. since it will be an audit issue.
Can anybody give any suggestions, so that the administrator need not assign a password and the users need not login in r/3 and change the pwd for the first time.
Hope you understand my problem, if u need any clarification, let me know..
Thanks.

Hi Gopi-
You can override the password check when a valid logon ticket is presented by setting the profile parameter:
login/pasword_change_for_SSO 0
using RZ10 in the instance profiles. (Requires a restart of R/3)
This overrides the password prompt/check when the user presents a valid logon ticket.
Hope this helps you out.
Thanks,
Marty

401k enrollment issue for New Hires

Our 401k savings plan does not appear in the enrollment screen (HRBEN0001) once an adjustment reason of "New Hire" is entered. All of our health plans and insurance plans appear, but not the 401k savings plan. Please advise if there is a way to get savings plans to appear. New employees are not eligible until 6 months out, however I think we should be able to get the record created and save with a future date. Otherwise, our workaround is to enter it directly via IT0169. Thanks for your help!

Have you defined the 401k benefits in the benefits program(flex admin)? Also , check the standard selections and assign under automatic or default plans.....

Where is my free iWork download for new iOS device?

I just received my new iPhone 5S today. It was advertised that it would automatically prompt you to download the free iWork applications however I received no such download!

Open the App Store.
See the apps are available to download from there.
You should have received a confirmation email from Apple. Instructions for downloading those apps may be included in that email.

When I try to activate my iMessage with the new iOS 7, it will not accept my original Apple ID. Also, when I try to use snapchat, it keeps popping up "login to iTunes to allow push notifications." please help!" I'm really frustrated

Please help!!!

I got this under XP before. I was totally baffled until I realized there was a network drive mapped to the same place XP was trying to mount my iPod. The common symptom is that you'll get this sort of "corrupt" error on one machine but it works ok on a friend's machine. If that's true for you, you can change the network drive mapping to another drive letter (easiest) or mount your iPod and change its drive letter in the disk management control panel (under admin tools).
Hope that helps... this one just about had me pulling my hair out until I recognized the problem.

TS1398 Can't get on apple store (itouch) is apple editing it for new iOS?

Can't access it

The web Apple store in the USA works now. It was down for a couple of hours before.

IMessage Issue for iMac

I had iMessage and Face Time on my iMac , but recently every time I want to use iMessage it is giving an error message that I should Sign In , which I have already did!

I have same since July, 2, 2014 with OSX 10.9.4

IMessage issues for new IOS

Similar Messages

Maybe you are looking for