Immediate Open after Close with PopUpButton

We are using a number of PopUpButton controls and are seeing some strange behavior.  When we try and close the button it immediately pops up 2 times and on the 3 starts to behave as expected.   This pop up button is on a View Stack and in a nested container.   I have not been able to figure out where the source of the open is coming from immediatly after the close.  I have done a lot of searching and have found some posts around ViewStacks and the popupbutton but nothing that sounds like what we are experiencing.
I know this is not a lot to go on, but thought I would give it a try.  Is there any tips that might be helpful in troubleshooting this issue?   Is there a way to figure out the source ("Where a event was dispatched")?   Any thoughts or troubleshooting tips would be helpful as my normal set of troubleshooting has not provided any clue to this point what might be causing this behavior.
Thanks in advance for any suggestions you might have.

Here is what is in the InitMenu
            public var printMenuItems:XMLList =
                <>
                    <menuitem id="menu1" label="Menu1" data="menu1" enable="true" />
                    <menuitem id="menu2" label="Menu2" data="menu2" enable="true" />
                    <menuitem id="menu2" label="Menu2" data="menu3" enable="true" />
                </>;
            private function initMenu():void
                printMenu = new Menu();
                printMenu.labelField = "@label";
                printMenu.dataProvider = printMenuItems;
                printPopUp.popUp = printMenu;
                printPopUp.addEventListener(DropdownEvent.OPEN, openHandler);
                printPopUp.addEventListener(DropdownEvent.CLOSE, closeHandler);
                printPopUp.addEventListener(MouseEvent.CLICK, clickHandler);

Similar Messages

  • How do I control a servo-valve to open and close with Dasylab?

    I am currently using a servo-valve to run an endurance test and would like to control it to open a close  at a set frequency rate and set pressure rate (6000psi). Is there a controller that I can use to do that?  I am using Dasylab with a NI Daq board and I get the pressure and flow readings from the analog to digital signals correctly but to actually control a servo which is powered with and external power supply to provide 25VDC.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     

    It would be unwise to use DASYLAb to close a loop on a servovalve.
    The best way to do that would be to buy a analog PID controller board, MOOG and Parker sells those, and use an anaqlog output from the NI card to controll it.
    We did many tests using this way.
    There are also other option like servo-controllers that could perform many tasks, like FG, conditioning, limits, and profiles and then use DASYLAb for Data acquisition.
    The price for this solution would be of course higher. 
    Tom Rizzo
    InSyS Corp.
    www.insyscorp.com
    Your DASYLab integrator

  • Trackpad playing up and windows open and close with out me doing any thing

    Hey since updating to OS X Mountain Lion 10.8.5
    my Mac has been playing up. I can't really control the mouse anymore
    it basically goes where it wants to go. Also my Mac started to open and close Windows on its one,
    switching back and forth between sides, as well as opening mission control and other things.
    It is impossible for me to use my Mac at the moment :
    Would be grateful for any tips on how to fix it !!!
    Thanx

    Try the troubleshooting help here > Portables and Magic Trackpad: Jumpy or erratic trackpad operation

  • New installation oADE opens but closes with error when I click any item, not prompting to authorize

    I am on Windows xp have have lastest flash installed and have AdobeID
    Installation went as expected, but when I launch the program, any click on its item, causes the program to close with and error and want to report to MS.
    This is the text from the report
    EventType : clr20r3     P1 : digitaleditions.exe     P2 : 2.0.0.0    
    P3 : 5058357c     P4 : presentationcore     P5 : 3.0.0.0     P6 : 4f7e7142    
    P7 : 1710     P8 : dd     P9 : system.argumentoutofrange   
    I have run though all the recommended IE settings and cannot fix this behaviour.
    Some help someone?

    Try uninstalling and installing v1.7.2.  This works more reliably in various ways.  Several people have reported issues with V2.0 on XP.
    Version 1.7.2 is a little difficult to find,
    available on Adobe site for Windows and for Mac.
    http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editio ns.html
    also for PC at http://www.tucows.com/preview/853736/Adobe-Digital-Edition-For-EBooks

  • Firefox won't open after close.

    Every time I close firefox it won't open back up. I kept deleting the old profile and it'd load up once and then after I closed it again it stopped working. I have narrowed the problem down. If I delete xpti.dat and compreg.dat it will start just fine, for one time. I am planning on making a sh script to do that automatically, but would still like to know why this is happening.

    Hello Christopher.
    Hopefully this support article is what you need:
    http://support.mozilla.com/en-US/kb/Firefox+hangs
    In any case, it's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
    If you need support for one of your add-ons, you'll have to contact its author.

  • Error -3 / Itunes wont open after updated with Quicktime 7

    I have been having problems with my Quicktimes for over a month. I was unale to take my son to his favortie websites. I was able to disable quicktime as a default, but now two things have happend. I can't open up Itunes, and now I can't hear any sound when I go to my son's favorite website. This happened a few days after I disabled it. I removed, and reinstalled Itunes, it wouldn't open, it said that I need to update. I updated it, and it still wont open. WhenI try to internal repair it it tells my error -3. Please help, I am about to lose my mind!
    Thanks in advance
    Tessa
    ipod mini Windows XP

    hi geraldo!
    When I click change/remove in Add/Remove programs to try to uninstall my older QT the Installshield window momentarily flashes followed by no action.
    good lord. a silent failure? that's a little odd.
    ... so let's check on some odd possibilities first.
    check to see if you've got Windows Installer 3.1v2 on your PC. the easiest way to do that is to head to your Add/Remove programs control panel (don't remove anything ... we're just looking), and check to see if "(KB893803)" is showing up next to the entry for Windows Installer. if it is, you're fine. if not, see:
    Windows Installer 3.1 v2 (3.1.4000.2435) is available
    ... let's also check on these possibilities (although the KB docs are about installs, they can apply to uninstalls too):
    iTunes 5 and QuickTime 7 for Windows: Installation won't work if Cygwin is running
    QuickTime for Windows: Uninstall QuickTime 3 or 4 before installing QuickTime 7
    iTunes 5 and QuickTime 7: Can't install on a computer with Windows XP Service Pack 2 (Japanese)
    if any of those seem to be relevant to your PC, does the QT uninstall go a bit better afterwards?
    love, b

  • Visa open and close with "for loops"

    Hello everyone
    In my program I used two "for loops" which include visa write and read for a RS32 port. it is not possible to close a devise with visa close as the out put is changed to 2D array!!! would you please help me with this error
    Attachments:
    ACU_232.png ‏108 KB

    sam009 wrote:
    Thanks for reply,
    It works for "for loop" but what about "event structure loop" still is error for that. 
    Right-click on the output tunnel and uncheck "Use Default if Unwired".  You will now be forced to wire the VISA Resource through each case.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Excel automatically create .tmp file when open after close Excel, tmp file still there

    Anytime I save a change to one of my Excel files, the TMP file appears in the destination folder and remains.  The "main" Excel file
    saves the retains the changes that I made and after each subsequent change, a new TMP file is created...old TMP files are not deleted.  This is only happening with Excel files.

    Hi,
    From your description, I understand that  you want .tmp file disappear . If there is any misunderstanding, please feel free to let me know.
    This issue can be related to many factors.
    First,  try to check out file->save-> Save autorecover information, if you use Excel 2010.
    If the problem persists, it may be a permissions problem.
    Take ownership of the related file
    =============
    1.      In the "Start" menu, locate "Command Prompt". Right-click and choose "Run as Administrator".
    Note:  If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
    Note 2: In Windows XP, click Start >Run, type cmd and press Enter.
    2.      Type the following commands, then press "Enter" to execute them one by one. Please note the space before the command and its parameter.
    takeown /f  <path>\<file name>
     cacls <path>\<file name> /G administrators:F
    3.      Restart the computer to check the issue.
    More references:
    http://support.microsoft.com/kb/308421
    If all user has full control rights , the .tmp file still in the folder ,please clean the virus .
    You could try disabling this program to see if the problem goes away.
    Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything I can do for you, please feel free to let me know.

  • Database connection remains open after close being called

    I am using oracle OC4J as my application server. I am not using connection pool and I am using non-pooled datasource to get connection. The database connection is made at runtime and then closed. I want to test if the users' connection sessions have been killed after they logout the application. But when I checked the table v$session in the database, it shows one connection remaining. I checked my program, the close method has been called. Does anybody know the solution?

    Hi Chen,
    This is just a suggestion for something to try -- only if you haven't
    already tried it, that is!
    Try running OC4J in "debug" mode. Here are details on how to do that:
    http://kb.atlassian.com/content/atlassian/howto/orionproperties.jsp
    Hope this helps you!
    Good Luck,
    Avi.

  • Firefox 4.01 with multiple tabs/windows open will close with the following dialoog boxes appearing, one for each window, evidently, "invalid preferences extensions.bprivacy.timer check that is listed in defaults/prefs.js"

    The cause of the need to revert to the last known good operating condition was trying to download a file from a Yahoo discussion group. The download froze the machine. When Firefox was restarted, it froze on loading, at first step of loading multiple windows and tabs. Many reboots to the same frozen state led to revert to the last restore point. That produced equivalent results on startup of Firefox, the option of F8 and revert to last known good operating condition was done. Everything seemingly operate OK, with the exception of the pop-up dialog boxes on shutdown of Firefox .
    Began Thursday 5/26/11
    I know locations and dates of all files "prefs.js" but don't know what to do with them, if anything.

    I removed add-on BetterPrivacy. No problems since then anymore.
    Regards,
    HABSBURGER

  • Firefox opens and closes with no visible errors

    8/7/14 8:29:48.733 AM com.apple.launchd.peruser.1624252898[649]: (org.mozilla.firefox.75008[20207]) Exited: Terminated: 15
    i tried removing it, and installing a new copy. even then it still doesnt work.

    Can you start Firefox in <u>[[Safe Mode|Safe Mode]]</u> by holding down the Options key?

  • Finder repeatedly opens and closes in my PowerBook G4

    I have been wrestling with this problem for some time. Finder repeatedly opens and closes in my PowerBook G4. When I log in to my Administrator Account, the Finder will repeatedly open and close with a rainbow spinner till the whole system freezes. I have reinstalled the OS and the problem returned. Now, I need to get my files on that account backed up and start over again. The trouble is that I can't access the files because the Finder isn't accessible. I've created a 2nd account, and am in the process of trying to copy the files I need to the new profile, but so far those files are barred. My main concern is why is this happening, and will it happen again if I reinstall? What's the best way to reinstall and start over?

    If the second account is an admin one and since the issue is specific to your original user account, you can proceed in two ways. One is to log into your new account, make a list of the preference files (plists) located in /username/Library/Preferences/, including any in the ByHost subfolder, log back into the original account, move everything on that other account's list from the original account's Preferences folder into a newly created folder on the Desktop, log out and back in, and see if the problem goes away. If so, you can copy the ones in the Desktop folder (one at time) back into /Preferences/, restart, and see if the problem returns. If so, you've identified the corrupt/conflicting one. Continue with all of them until isolating the bad ones. That'll save you the trouble of resetting preferences.
    The second way is much more detailed and I'll not burden you with the steps unless the above doesn't fix the issue.

  • Open and close multisim contact with LabVIEW

    Can I open and close multisim contact with labview and read the receptor estatus (p.e. lamp)?
    Thanks.
    Attachments:
    Dibujo.JPG ‏13 KB

    Hi Guddan,
    I created a RFC having a query which is taking a long time to execute. So i want to close RFC connection with portals which is via java connector(JCO) before that query and open the connction again after that query.
    I guess i will need to understand your requirement a little more in detail, as i understand you have an RFC which has a query within to fetch some data and is taking a long time to do so. In the meantime you don't want to keep the connection open?
    My question would be, Is the role of this RFC to only execute the query and fetch the data or does it do something else?
    If it does other things and these are independent of the query execution, then you can span a parallel call within the RFC to execute the query and in the meantime the RFC does the other things (or vice versa) hence reducing the overall time taken.
    If the sole purpose of this RFC is to execute the query, then you will not be able(i mean to say there is no simple and direct way of doing this) to close the connection after the Query is started and re-establish the connection after its execution, for a simple reason that - how will you know if the query has completed it's execution, so that you can establish the connection back.
    Alternate solutions, make this a two way asynchronous call, 1) You invoke the RFC asynchronously and close the connection, the RFC in turn will execute the query and transfer the data to JCO via another RFC call.
    If this needs to be a synchronous call, then you will need to optimize the query to its best.
    Regards,
    Chen

  • Pages 09 document; open and close many times; right way with Lion?

    I have a 106 page document that increases in size on a daily basis. With OS 10.7, iWork/Pages 09 on my new, iMac, it's common that I lose as much as two sentences after the document is closed and re opened. After 10.7 was installed the document was closed using Command - S, and subsequently closed by pulling down File and selecting Close. - Not the way to close; the red button was so easy with 10.6. IS UNINSTALLING LION THE BEST SOLUTION?
    And yes, I've read the sorry jibberish in the Pages 09 manual - which doesn't say how to open and close repeatedly a document with Pages 09.
    So, with the Lion - the worst ever of spending $30, is it necessary to do a Command S every time you close? And what exactly is necessary each time you close a document using Pages 09 and Lion? - And about Auto Save; well, what about Auto Save? - The Lion means well for something other than common, understandable, text production.  -- How about a separate application of Appleworks for text producers like me?

    The red button is always available under 10.7 (or 10.7.1)
    Under 10.7, press cmd + S once when you create the document.
    After that, the system automatically save your changes.
    No need for cmd + S.
    To close the document we may use :
    the red button
    cmd + W
    File > Close
    as it was with older systems.
    monte45 wrote:
    And yes, I've read the sorry jibberish in the Pages 09 manual - which doesn't say how to open and close repeatedly a document with Pages 09.
    The User Guide is perfectly clear and precise :
    Yvan KOENIG (VALLAURIS, France) jeudi 22 septembre 2011 19:21:52
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • I use an iMac (27" 3.4) and have problems with the Magic Mouse. It does not use contact, but opens useless and unrelated submenus with every click, even on the empty desktop. I can't shift, open or close pages. Has anyone out there the same problem?

    I use an iMac 27" (mid 2011). Until recently I had OSX 10.6.8 installed, but both, the HDD and SSD had to be replaced, and I lost all the memory.
    After the repair through Apple Care I had OSX 10.7.5. (Lion) installed, which developed a Magic Mouse problem.
    Unlike with most users, I have no problems with connection, but grapple with a different kind of erratic behaviour.
    All fancy stuff is turned off in the mouse preferences. When I try to move, open or close pages, unrelated submenus pop up and hinder the
    required task. No matter how often I click, these menus stay there, and they even come up when clicking on the bare desktop.
    It renders the mouse absolutely useless, as no work can be done with it.
    The first 'Magic Mouse' had depleted batteries every few days, despite switching it off after use.
    I was supplied a new Mouse, which does better battery-wise, but the problems are the same. I can't get a result by clicking on any link, due to
    the pop-up menus, so both 'Magic Mice' are totally useless.
    At present I am using the old USB mouse from my Mac Pro, and that works still o.k.
    The problem are not the mice, but the software. The first 2 weeks after installation of OSX 10.7.5 the Magic Mouse worked though.
    I have no idea as to what the reason may be.
    Has anyone in the community ever experienced that particular problem. Any hint would be welcomed.
    Thank you!

    Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
    Someone on this forum suggested, that USB3 may interfere with the magic mouse.
    I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
    Thanks for the advice, Bee
    Cheers, Gerd

Maybe you are looking for

  • After 10.4.11 upgrade HD backup problem

    I've used SuperDuper! to backup my 15" MBP numerous times. Since my update to 10.4.11 SuperDuper! keeps failing to copy at the exact same point during the copy process. The log shows an I/O error occurring after examining about 12,000+ files (before

  • HT201303 Why won't my film play on apple tv.just downloaded project x?

    Please can you help me.... It won't work?

  • BIA Deployment Planning

    Hi Experts, Do you have any thoughts on a best practices deployment for BIA? Did you index all cubes automatically or use certain process chains? Any thoughts you have on deployment would be appreciated. THanks!

  • Windows GetCommError Cose xF9C0

    Hi, I developed a labview 6.0.2 application to test a UUT via the USB Port on a PC with Win2000. On the PC, a PCI serial card is used for COM1, an external USB to Serial adapter is used for COM2. After the test program initializes COM1 and COM2 and t

  • Textfield using Synclast UI

    Hi, I've read about using synclast's textfield. When I tried the demo, the textfield mode is only for numbers, how to enable characters input using synclast?