Immediate Requirement of Discoverer 4i

We have an immediate requirement for Oracle ERP Expertise:
Prior experience in developing Discoverer workbooks using Discoverer 4i based on Oracle's Enterprise Data Warehouse 3.1 in the area of Supply Chain Intelligence. expert in Supply Chain Intelligence reporting experience in developing Workbooks in the area of Data Warehouse reporting (preferably Supply Chain).
Qualification : Graduate or PG Engrs / MCA / MCM from Reputed organisations.
Location : Mumbai OR Bangalore and Asia Pacific
Experience : Min. 3 yrs to 8 yrs
Resume to be mailed at: [email protected]

You can configure the port that the Plus applet will communicate thru the firewall using the GateKeeper configuration tool ("gkconfig"). There's a chapter on firewall support in the Discoverer 4i Configuration Guide that should be helpful.
BTW, it should be (by default) communicating over port 15000.
null

Similar Messages

  • What is the exact version of JRE required for Discoverer 10.1.2.2?

    Hello,
    I understand that through Application Server Control it is possible to set whether Discoverer Plus should use "Oracle JInitiator" or "Sun Java Plug-in 1.4".
    The problem I have is that, due to immoveable restrictions in place on the workstations where Discoverer Plus the will be used, it is not possible for the browser to automatically download and install either the Sun Java Plug-In 1.4 or JInitiator to the end-user's workstation the first time the user tries to access Discoverer Plus.
    In this environment, the only way to get either JInitiator or Sun Java Plug-in 1.4 (which I assume just means the Sun JRE) onto the users' workstations is for an administrator to manually install it. So my questions are:
    1) What is the exact version of JInitiator required to run Discoverer Plus 10.1.2.2?
    2) What is the exact version of Sun JRE required to run Discoverer Plus 10.1.2.2?
    3) If the workstations already have another more recent version of Sun JRE installed, is there any way to get Discoverer Plus to use that version?
    Thanks for your help,
    Andy

    Resolved.
    For reference, see Metalink article 465234.1

  • J1iin is utilizing immediatly required is monthly utilization

    Dear SAP Guru's
    Please help me I am unable to do the monthly utilization by J2iun for local excise invoice.
    1) The series is maintained for no immediate utilization( check is un ticked) for immediate utilization for local excise.
    2) for Export excise invoice it is working correctly as immediate utilization check is enabled.
    3) For local excise utilization even though the settings are there for monthly or fortnightly utilization even then it is utilizing immediately in J1iin
    Please help to resolve this.
    Regards
    Umesh

    1.Utilization Problem:
    J2IU has to be used for monthly utilization . You will have to  utilize Excise duty liability Excise duty wise by providing all the dispatch plants in the selection screen.
    In the second screen of the j2i5 you will get all the credit balances accumulated in the respective excise group, utilize all the payable duty from accumulated credit shown in the screen.
    Part2 entry will be created once you simulate & save.
    2. Import material return:
    If you material is returned to vendor then no need to reverse the credit.
    Raise an OTHR invoice through J1IS providing the correct duty break-up.
    Regards,
    Akhileshwar K

  • Immediate Requirement-----Identity & Access Management Consultants

    Dear Friends
    My colleaques company is looking for Architects Experienced in any of Identity & Access Management Products.
    Must have exposure in Java Platform, CISSP Certification is desirable.
    12 Positions Open
    Experience Ranging: 5-12 years
    If any body interested kindly forward your profile with your Skill Set to [email protected]
    Cheers

    You can check out this link for Oracle University in India:
    http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=3
    -Kevin

  • Discoverer integration with EBS R12 !!!

    Hello Sir,
    I need help to install/integrate Discoverer with R12.
    Actually, our clients are using Discoverer 4i in current EBS 11.5.10.2 in production. We have just upgraded EBS in TEST environment from 11.5.10.2 to R12.1.3.
    I had suggested client that Discoverer 4i is actually de-supported and they need to upgrade Discoverer version to minimum 10.1.2.3 or higher to integrate it with R12.1.3.
    Now, client also have requirement for Discoverer to be certified with MS Excel 2010 format. So I have suggested to upgrade Discoverer version to minimum 11.1.1.4.
    Latest certified Discoverer version is 11.1.1.7.0 as per note Using Discoverer 11.1.1 with Oracle E-Business Suite Release 12 (Doc ID 1074326.1)
    1) Can you please provide your opinion and any documentation which I can follow to install/integrate Discoverer with R12 ?
    2) Do I need to first install separate 10gAS for installing Discoverer 10.1.2.3 or Fusion middleware home for installing Discoverer 11g ? If yes, where can I find doc for this installation ?
    3) Since 10g support has ended July 2013, where can I get media for installing 10gAS ?
    4) Is there any additional licences required for using either Discoverer 10g or Discoverer 11g ?

    1) Can you please provide your opinion and any documentation which I can follow to install/integrate Discoverer with R12 ?
    In addition to the doc you have, please see:
    https://blogs.oracle.com/stevenChan/entry/discoverer_11_1_1_7
    How to Test Discoverer Integration with E-Business Suite 11i and Release 12? (Doc ID 1065257.1)
    Running Discoverer Reports From EBS R12 (Doc ID 1516784.1)
    R12: How to Create a Link to a Discoverer Workbook (Doc ID 471303.1)
    2) Do I need to first install separate 10gAS for installing Discoverer 10.1.2.3 or Fusion middleware home for installing Discoverer 11g ? If yes, where can I find doc for this installation ?
    Installation Recommendations - 11g Release 1 (11.1.1)
    Installer Screens - 11g Release 1 (11.1.1.7.0)
    3) Since 10g support has ended July 2013, where can I get media for installing 10gAS ?
    You can download WebLogic 10.3.6 from WebLogic Server 12c (12.1.1), WebLogic Server 11g (10.3.6) and Previous Releases
    4) Is there any additional licences required for using either Discoverer 10g or Discoverer 11g ?
    Please see Steven Chan's reply in this link -- https://blogs.oracle.com/stevenChan/entry/discoverer_11gr1_primer
    Thanks,
    Hussein

  • Oracle 9i and 10G professionals required

    Hi All,
    A company in Tanzania is looking for Oracle 9i and 10G professionals for immediate requirement. Those who are looking for change and has 4 to 5 years experience can send in your resumes to [email protected] Indians are preffered. Mention "ORJOB#040820081411" in the subject.
    Kindly send in your resume as early as possible.
    Thank you.

    You can try setting the SGA to a low value and bring up both the databases. I don't think it should be too slow provided you are not running other windows programs.
    If you are really interested in trying out new products you can also explore the option of installing VMware, creating virtual machines & installing Linux, and then playing with the different Oracle products. Doing this will at least keep your main windows operating system clean.
    You may want to check out my blog post on Build your own oracle test lab
    Cheers !!!
    Ashish Agarwal
    http://www.asagarwal.com

  • Software and hardware requirement of Discover 4i?

    What is the software and hardware requirement of Discoverer 4i?
    What is the requirement also for application-mode? I mean the application side.

    Hi I have looked the Metalink Note which is mentioned in the reply but that is not having the exact software and Hardware Requirements (i.e os packages required for unix platforms) for OEM Agent. Please help me to know the requirements pls.

  • SAP Freshers/End users required urgently

    Hiii SDN Members,
                                We are manpower recruiting agency based in Cochin & Bangalore. We have been retained by our CMM Level 4 client based out of Techno park Trivandrum to recruit domain experts/ end users for their immediate requirements.
    Qualification: B.tech, MBA
    Domain: 3-4 Years in Sales & Marketing.(sales rep's not suitable)
    Selection Procedure: Shortlistd candidates have to appear for domain knowledge test, group discussion & Personal interview. Selected candidates need to sign a bond for 24 months with the company. Training would be provided in Trivandrum for 6 weeks on Industry specific modules like IS-retail. IS-Oil & IS-EC&O. After training candidates will be placed either in Trivandrm/ Bangalore/ Mumbai according to the requirement. Interested candidates rush your resumes to  [email protected]
    Regards
    Rajesh

    Hi,
    I think this is not the forum to discuss the job openings.
    Amrish Purohit

  • Accessing Discoverer Reports from Oracle Apps

    Hi all,
    Requirement: Accessing Discoverer Reports from Oracle Apps
    Discoverer: 11g
    Oracle Apps: 12i
    When I am trying to access the Discoverer Reports from Oracle apps, again it is asking for Oracle Apps Login details. Can we have any other option that can directly connect to the viewer without any intermission. Please its urgent requirement.
    ThanQ,
    ABR

    Hi Arun,
    When I am trying to access the Discoverer Reports from Oracle apps, again it is asking for Oracle Apps Login details. Can we have any other option that can directly connect to the viewer without any intermission. Please its urgent requirement.Pl refer section *6.4. Set Applications profile options in Oracle E-Business Suite* from MOS tech note
    *Using Discoverer 11.1.1 with Oracle E-Business Suite Release 12 [ID 1074326.1]* and make sure that all profile options are set to a valid value.
    thanks,
    X A H E E R

  • I need advice on how to go about creating objects in discoverer.

    I have a schema shtest that contain all the tables I am going to use in Discoverer. However a new schema shdisc is going to be use for discoverer. My question is
    1. Should I create views based on these tables in shdisc or
    2. grant select on shtest to shdisc and reference these tables in discoverer?
    Initially, I created synonyms in shdisc, but these are not visible in discoverer. However, when I created views in shdisc, am able to see these objects in discoverer but am not convince this is a good way. In essence, I created all tables in shtest as views in shdisc. Please advice.

    Hi Ade,
    1. First off SHTEST and SHDISC schemas should reside on the same database. 2. You have to create end user layer in your SHDISC schema (you should give the rights required) using Discoverer Administrator tool. EUL tables get created in SHDISC schema.
    3. Using Discoverer Administrator you need to pull the structures from SHTEST. Once you open your Discoverer Administrator, you will see a little window with "Administration Tasklist".
    Anyways, the best place to get information related to this is from Discoverer Administration Guide. Then you might want to checkout the details on reporting tool Discoverer Plus/Discoverer Viewer or Discoverer Desktop based on what you choose for building your reports.
    Hope this helps,
    -Esther

  • Discoverer - Dynamic Drill Level puzzle

    Hi,
    I came across a strange requirement for discoverer reports. The client has a sales organisation hierarchy with levels like country,state, region, city.
    1) The first problem is to show the data in the reports according to value of the country, region or city of the user. That is a Manager from country X should be able to see only data from country X. The possible solution for this kind of requirement would be a master table to store mapping of username to their geography. And then at the EUL level, putting mandatory conditions in the report to filter out data. Is there any other better approach possible?
    2) The TOUGHER puzzle is same report opening at different level of hierarchy according to the user's position. That is a sales SUM report opens up at country level and shows separate sums of each state under that country head, that can be drilled down to City level. That is two levels of drill down (region, city).
    When a State head logs in then he gets the report for sum of sales for each region under that state, that can be drilled futher down to city level (one level of drill down).
    Is it possible to open the same report at country, region, state, city level according to the user??
    I checked one of the posts from Rod in the message : HR Intelligence - Salary Information - Can we restrict ?
    In this he has suggested a very much possible way to replace the item with a custom Item where the actual underlying Item is decided in the DECODE. So in the current puzzle, I can create an Item SALES_AREA which decodes to Country, state, region or city depending on the user. But I don’t know how user friendly it’ll be for super users who want to use all the areas in the same report as different columns.
    Is there any other way possible way out for both of the above problems… I know this would be real creative solution to come up with..
    Thanks

    Hi
    We really are only limited by our own imagination when it comes to what can be done inside Discoverer. There are many different ways you can implement what you hve proposed.
    Have you considered using a VPD or VPD-like scenario to control what you are asking?
    Did you consider using some of the code that I supplied in the same posting you referenced in your original posting? Using this methodology you can use a separate control / bridge table to handle who sees what. Then you create a function of the username / userid. If that function returns true or 1 or yes or whataver you choose, you open up access to the column or row.
    The code I supplied can be used to manage both column-based and row-based security such that protected columns like SSN, date of birth, salary are hidden from prying eyes, or where the whole row will only display when a user has the correct clearance. If you've stayed with me and tuned in to my logic, you will be thinking Mandatory Conditions at this point. :-)
    I hope this helps
    Best wishes
    Michael

  • Creation profile with required parameters

    Please can anyone tell me  how to create the new creation profile with the following parameters: Delivery on Thursday and creation on Wednesday.

    Hi,
    Settings for the Creation Profile
    You make the following settings in Customizing for Purchasing under Scheduling Agreement ® Maintain Release Creation Profile for Scheduling Agreement with Release Documentation.
    General Parameters
    For JIT delivery schedules, you select Changed or next date. For forecast (FRC) delivery schedules, you select Next date only.
    For JIT schedules, you specify that backlogs and immediate requirements are determined.
    Aggregation Horizons
    For JIT schedules, you specify daily aggregation and enter 10 workdays as End. For FRC schedules, you choose monthly aggregation and enter 180 workdays as End.
    This has the effect that JIT delivery schedules show the daily quantities for the next 10 workdays and FRC schedules the monthly quantities for the next 180 workdays (9 months à 20 workdays).
    Creation Periodicity
    You specify weekly creation for JIT schedules and monthly creation for FRC schedules.
    Tolerance Profile
    You specify 10 days as the checking period for JIT schedules, since this corresponds to the release horizon. You enter 5% as upper and lower tolerance limits and choose Overall check.
    In your case JIT SCHEDULE IS VALID. I hope this will clear your issue.

  • Order BOM functionality suggestions required

    Hi Gurus
    I have a very immediate required question on a new functionality at my client place. My client had given a master data BOM and wanted to edit the BOM based on the customer requirement and selected BOM components should get transferred to MRP for the planning.
    So BOM is already maintained and based on the order , Order BOM should be maintained. So after fixing the order BOM components should get transferred for planning. Please Suggest this scenario with all the tcodes and configuration involved .

    Hi,
    Order BOMS are to be used in a MTO scenario if the components are to be transferred to planning.
    No additional customization are required for order bom, following steps are to be followed
    (1) Create a master bom - CS01
    (2) Create a sales order - VA01
    (3) Create Order BOM - CS61 (you can refer to the master bom & copy the relevant components)
    (4) Execute MRP - MD50/MD02
    (5) System shall generate the planned order & it shall have the components assigned in the order BOM
    I hope this addresses your query
    Warm regards,
    Umesh

  • Workflow based OA page navigation - Required urgently

    Hi
    I am facing an issue when trying to navigate using workflows. In the OA page controller whenever a call to getNextPage function is given from the page controller, the error of your login session expired due to loss of data page appears.
    I am getting stuck at this issue since a long time and have some immediate requirements.
    Has anyone faced similar issue? If so, please provide a solution.
    Thanks
    Edited by: user11961162 on Sep 30, 2009 7:20 PM

    Hi Manu
    I have created a custom workflow which gets called from Personal Actions menu. This workflow selects one of 3 pages given whether the person's record is present in the table.
    Now, the first OA page gets called from the workflow. However, when I try handing over the control to workflow using getNextPage(pageContext, workflowResultCode); I get an error of Your login session expired.
    I tried fetching the itemKey value from the workflow by creating an attribute and setting itemKey value there, however even then the OApage is not able to fetch the attribute value.
    Do I have to fetch itemKey value for getNextPage and if so, then do I have to utilize SSHRParams or any such class for the same.
    Your inputs will be most valuable. Please let me know of how the control can be transferred to the workflow?
    Thanks in advance.

  • How to code a predifined function module in sap ,in se37.

    can any one tell me how to code a predifined function module in sap ,in se37.it's an immediate requirement.if u give a brief description it'll do.

    Hi Henry,
    There are two possible ways in which I can interpret your question.
    1. You want to create a new Function Module in SE37. you will have to refer to the <a href="http://help.sap.com/saphelp_47x200/helpdata/en/d1/801e9a454211d189710000e8322d00/frameset.htm">Function Builder</a> tutorial for that.
    2. You want to use an existing function module in your program. In the code of your program in SE38, click the button <i>Pattern</i>. On the pop-up, give the name of the function module that you wish to use in your program.
    Regards,
    Anand Mandalika.

Maybe you are looking for