Imovie 9.0.9 still on Mac after upgrade

I have updated my Mac to Mavericks and installed all the updates.
I have iMovie but I also have an iMovie 9.0.9 folder with the old program in it (this is 1.32 Gb) Can I delete this application and folder?

All the previous imovie event and project folders are there as well - iMovie 10 imports all your existing events and projects into a new library specifically for iMovie 10, rather than converting them in-situ. This new library is akin to the iTunes library - you can see the contents with "Show Package Contents" - rather than it being plain old folders.
I guess because iMove 10 is a big UI change from the previous version, Apple are being polite and allowing users to revert back to the old version without having to reinstall and re-extract files - if they don't like or have issues with the new iMovie 10.
That said, if like me you have a large amount of iMovie content, creating a brand new copy of all this media in this way means I now have two copies (2 x 250GB!) on disk - all now hitting my Time Machine devices!
Anticipating this, Apple also provide a tip on removing the iMovie 9 folders at your leisure - here http://support.apple.com/kb/HT5917

Similar Messages

I'm stucked on APPLE evolution bar when I restarted my Mac after upgrade to Yosemite. I Can't access on my computer.

I'm stucked on APPLE evolution bar when I restarted my Mac after upgrade to Yosemite. I Can't access on my computer.

Good Question.
I downloaded Yosemite a while ago, but didn¹t install it because it would
knock out several applications such as Solitaire till Dawn But finally
when some apps wouldn¹t work with my current version of Safari I thought I
would upgrade Safari but they wouldn¹t work with the OS I was using so
suddenly I had no Safari and was worse off than before. So I bit the bullet
and upgraded to Yosemite with the earlier version I already had. Not pleased
when iPhoto didn¹t work, and it also coincided with an national email outage
here in Australia by the major carrier so no email either.
Experience has taught me that it gets sorted out in the end but in the
meantime...
And the lesson is [

Duplicate emails on outlook for mac after upgrading to mavericks

I was getting duplicate emails on my outlook for mac after upgrading to mavericks
After reading several websites, I realise this is a common problem.
some people suggesting checking " prevent app nap"
this seemed to work for a while, but is now back again
it is very difficult to handle, with hundreds of emails downloading each time i log in
regards
seema

Try looking/posting here.
Microsoft Support – Office for Mac
Microsoft Support – Office for Mac (2)

Network can't see my Mac after upgrading to Mountain Lion 10.8.2

After upgrading to ML 10.8.2 (coming from Lion), the network (another mac and an iPad) can't see my Macbook-pro.
Using a network scanner (Fing on iPad), my Macbook is not there, and in the same way all the other services from Macbook-pro (such as Internet sharing, Filemaker sharing, ...) don't work.
My Macbook-pro is regularly connected to the right network and has a proper IP address (192.168.1.32 with 192.168.1.1 being the router, ...33 the other mac and so on). Also, my Macbook-pro perfectly reaches both other LAN devices and the internet.
I've tried disabling Firewall but nothing changed. I havn't got any antivirus nor security programs running.
Anyone experiencing the same issue?

Please read this whole message before doing anything. This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it. The purpose of this test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Wifi problem with Mac after upgrade to Mavericks

I just upgraded to Mavericks but something wrong with my wifi.
i can get internet through LAN link from Airport but not through wifi even i can receive an IP address
i tried connect to hotspot with my iphone5s and it works.
Other devices can use wifi just fine through Airport, just not my Mac using Mavericks
In conclusion,
Airport should be fine because my other devices works.
Mac wifi should be fine too because i can connect using hotspot.
so why it's not working when i connect Mac to Airport?

I was having problems connecting to Wifi with my Macbook Pro (!2010), after upgrading to Mavericks. I was on the phone repeateadly with AT&T because I have Uverse. Testing everything (channels, signal strength) and had techs come out to check the line, ports, switches, etc. When I hardwired the Mac into the Uverse router, it worked fine. This rulled out any problems with the line in.
I considered getting a repeater but then I read that repeaters are not really good and it is better to reconfigure a router to act as an access point on the network. Plunked down about $80 for a Belkin AC750 router at Best Buy. In the setup it has an option to set it up as an access point only. Clicked that, connected it to my Motorola NVG510 Uverse modem and then connected to the Belkin router from my Mac. Voila! It's been a solid 11+ Mbs ever since (my plan maxes at 12Mbs). Connection is still solid and life if good even though it ***** to plunk down another $80 for a second router. But it was worth it just to get rid of the headaches.
I think the wifi capabilities of the Motorola NVG510 modem are the cause of a lot of problems with AT&T Uverse issues, particularly for Mac owners. I think it was also causing my Airport Expresses to drop occasionally.... Few minutes of music then drop... music drop.... All gone now.
I don't know if you are on Uverse but if so, I highly recommend configuring a second router as an acces point (it can be any old router you still might have - the setup is just a bit trickier because you have to do it manually).
Good luck.

Flv export still not available after upgrade

After upgrading to Flash CS3 the option to export to flv is
still not available on my Intel Mac from Quicktime Pro or Final Cut
Pro 5.1.14. I upgraded with the understanding that the new version
would be universal binary and would offer this ability that was
there on PPC Macs. Is anyone else having this problem?

Well i solved it my self i just reinstalled the upgrade v30.0.018 and it works just fine now :-D
N97 White (RM-507) V12.2.024
http://www.n97geeks.com/

ScreenSaver Still Stays On After Upgrading to 10.6.7

Hi,
I manage a lab of 88 computers at Santa Clara University. After upgrading from 10.5.8 to version 10.6.7 the screensaver stays on after I have disabled it in the system preferences. I've tried to delete the preference files in both the user profiles and the main drive Byhost, and Preference on main drive screensaver plist anything that says screensaver I've delted and the thing still comes on. Really frustrating!
If any of you can send step by step instructions and where things are located I'd appreciate very much.
I'm using an iMac about four years old.
Thank you for your help.
Dr. Phil

post deleted.

Why does the migration wizard run every time I start up my mac after upgrading to mavericks ?

After upgrading to Mavericks, I log in as normal but then a migration wizard starts up asking me where I want to import data from and create new accounts. Why and how do I stop it ?

It could be part of OS X's Resume feature. Any app that is open at shutdown will re-open on boot unless the tick in the following image is deselected when shutting down/restarting:
Also check that Migration Assistant isn't listed in System Preferences>Users & Groups>Login Items.

Help! Cannot reinstall Indesign - creative cloud thinks it is still on Mac after deletion!

Hi,
I recently installed Creative cloud in order to try out Indesign etc. Unfortunately my start-up disk got full, so I deleted them all. I then went to reinstall them, after telling the creative cloud to use a different file location - on an external harddisk. I successfully downloaded and installed Photoshop and Illustrator. However, when I tried to reinstall Indesign, the Creative cloud seems to think it is still on my Mac - which it certainly is not! The only active button neaar Indesign is "tutorials". So now I do not have the programme, and I cannot find a way to reinstall it.
HELP! I really need the programme for a course I'm taking.

Run the Cleaner tool:
http://www.adobe.com/support/contact/cscleanertool.html
Mylenium

Why is my Macbook still slow even after upgrading

Hi everyone, I'm not sure if this has been answered before but here goes.
So I have a Macbook 2.4GHz (13.3-inch Intel Core 2 Duo "Penryn") - Early 2008. Have been using it for the past 6 years without any issues. However during the past 1 year I've noticed that it has started to run slower and slower. Even simple task such as opening Safari might take longer than usual. I do not have much application installed as I only used that computer for surfing the net and making Words & spreadsheet documents. I have about 200GB of free hard disk space out of the 250GB standard HDD along with 2 GB of ram. After doing some research around the forum, I decided it might be a good idea to upgrade the HDD to a faster 7200rpm 750GB HDD drive as well as replacing the ram with new 2x2GB modules. I also did a fresh install of OS X Mountain Lion 10.6.8 (I did not install any other applications). But to no avail, it seems that the computer is still laggy and isn't as snappy as couple of years back. And by laggy I mean that opening pre-installed applications on the Mac such as iPhoto and Safari might still take 4-6 "icon bounces" to open.
So my question is,
1) What might still be causing the lag?
2) Are there any other components on a Macbook that might cause it to slow down?
3) Does components like the CPU degrade over time?
Any help would be highly appreciated.

Your computer isn't getting slower, it's other things demanding faster. If you are installing all the possible updates to software those will be designed for newer computers. Once you start browsing you're browsing a web designed by people who because they spend all their time designing pages they themselves have powerful machines with fast connections because it is their job. It's like if all city streets were designed by racecar drivers. A 2008 computer is already considered vintage by Apple and close to no longer being supported in any manner. Vintage and obsolete products - http://support.apple.com/kb/HT1752 I have an even older computer than you and it is annoying but that's the way things are.
Frankly 4-6 icon bounces doesn't sound long to me. Don't forget that for applications such as iTunes how long it takes to open will also depend upon the size of the library.
I don't think CPUs wear down. Conceivably some slow-down could be the result of excessive bad sectors on a hard drive but you say you replaced that (and I would expect it to have shown more serious symptoms were that happening).
You can use Activity monitor to check your RAM usage. Newer applications and newer OS versions will require much more RAM than posted "minimum" If a computer doesn't have enough RAM it starts using the hard drive which is slower than chips.

How can I get my back up on my mac after upgrading to Yosemite?

Hey everyone!
Before upgrading to Yosemite I made a Time Machine back up on a external hard disk.
After the upgrade to Yosemite was done I started with the setting-screen like anyone else would. When the Migration Assistant-screen came up I selected my external hard disk with my time-machine back up on it. Unfortunately Migration Assistant wasn't able to put the back up on the computer because apparently there was not enough space.
23gb to less or something. So I deselected a few maps in order to get under that amount and tried again. Nothing happened and the same message: not enough space.
So now I am stuck with a empty mac without any of my previous documents, music, etc.. What should I do? Should I fully format my mac?
FYI: my mac consists out of an 80 GB Solid State SATA Drive and a 128 GB Solid State SATA Drive.
The back-up my time machine made on my 1TB external hard disk is 131,5 GB big.
HELP ME PLEASE! WHAT TO DO!

iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen

Cant restart my mac after upgrading to Yosemite. Reason is i can't quit the mail app.

Please someone help i can't quit mail app nor use the app. For that reason i can't even restart my mac or shut it down.

Hit
alt+cmd+esc -- In the window that opens, force quit mail.
Then do a restart.
If that does not work. Press and hold the power button on the mac for 10 seconds. That will force it to shut down.
Boot it after that...
Try solution one first !

Firefox will not load up on my mac after upgrading to 3.6.8

I click the firefox icon in the mac system tray, it bounces for a few seconds, but the software does not load.

Finally after trying to uninstall/reinstall (no luck!)
I'm on Windows 7 64 bit. iTunes 10.7 And I have a solution:
If found a thread about IPv6.
I followed the same directions on Windows 7 64 bit and it worked.
Disable IPv6 on _all_ of your IP ethernet adapters.
That includes Virtual Machines (VMWare... yes those too), including IPv6 for wireless.
Close iTunes. Start iTunes. Works. Airplay Icon is back.
It looks like All of the AirPlay devices may have to be re-setup. At the very least rebooted.
I found that I had to clompletely erase my DHCP addresses from my (non Apple) router.. and that fixed it. Finally.
Even though this is for the Mac... I believe they are onto something. Original thread link:
http://mactips.dwhoard.com/mactips/other-applications/fix-airplay

E17 edje still not working after upgrade

Well, e-cvs seems to be ok on my laptop now. Still an issue in the battery module, excess space between the battery icon and status text, but that's minor. edje-cvs still doesn't seem to work for me. I get an "ERROR: Invalid root filename" when I try to edje_decc filename.edj, but that's been like that since after edje-cvs-20080218 so I didn't file a bug report as nothings really changed. Anyone else having this problem?
Edit: BTW, I just downloaded pressh's Kandy.edj and tried to edje_decc it and got the same "ERROR:Invalid root filename" but it works on other downloaded .edj files with 20080218 ??????
Last edited by bgc1954 (2008-03-28 19:09:58)

Now I'm really confused--well not too badly.
I upgraded back to edje-cvs-20080327 and now I can edje_decc Kandy.edj. The original problem only happens now with a custom theme I was working on but I can edje that with edje-cvs-20080218 and not 0327 so it must be something specific to that file. It also happened to a chrome.edj that I customized from get-e.org but when I did a fresh download, no more problems. Another customized theme I did will edje_decc no problem either with 0327. Kinda weird but probably specific only to me so not to worry.
As far as the battery module thing here are two screenshots showing Kandy and chrome themes with the text spaced way to the right of the battery icon. This is on my desktop so no status shows but you can see the spacing issue. I tried your previous suggestion in another post and and changing the spacing line in battery.edc didn't help at all. But when I use e-cvs-20080218 there is no space between the text and battery.
http://www.mediafire.com/imageview.php? … tj&thumb=4
http://www.mediafire.com/imageview.php? … jm&thumb=4
Btw, pressh, if you want to check that custom theme that won't decompress it's posted on e17-stuff.org as Star Theme. EDIT: I just had an idea that worked. I decompressed my custom theme with 0218 and then compressed with 0327 and now it behaves properly.
I guess I'll repost my theme on e17-stuff.org so that it is usable by the new edje-cvs.
Last edited by bgc1954 (2008-03-30 14:50:57)

Virus Mac after upgrade - Fonts disappeared Devil in Dock

Hi guys
Dont know if any of you can help with this problem.
I was installing a upgrade to my operating system from the apple website. There appears to be a virus on my system.
There is a Devil in my dock, and all my fonts have disappeared. Dont know where to start with fixing this problem. Installed Virus software, but we cant even read the text in the program.
Please help
Thanks
Colin

Hi Colin! And Welcome To Discussions!
What upgrade were you installing?
Please explain a Devil in my dock.
What do you mean that your fonts have disappeared? Are they no longer in their folders, or are you not seeing any text?
What size is your Hard Drive, and how much space is available?
How much RAM is installed, and is it original or added?
Have you run Repair Disk?
THESE ARE THE STEPS FOR USING DISK UTILITY TO REPAIR YOUR HD
1.Insert your Mac OS X CD-ROM disc or Restore DVD disc, then restart the computer while holding the C key.
2.Once started up from CD or DVD, choose Disk Utility from the Installer menu.
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from disc to access Disk Utility.
3.Click the First Aid tab.
4.Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5.Select your Mac OS X volume, if necessary.
6.Click Repair. If DU reports errors it has fixed, then re-run Repair Disk until no errors are reported.
7.When finished, select Quit Disk Utility from the Installer menu.
8.Select Quit Installer from the Installer menu.
9.In the resulting pop-up window, choose restart.
10.After the computer has restarted, you can eject the CD.
Good Luck!
ali b

Imovie 9.0.9 still on Mac after upgrade

Similar Messages

Maybe you are looking for