IMovie add Ken Burns to video clip
I did some editing work on a slideshow in iPhoto with audio to make a storybook. After I started to adjust the Ken Burns effect, I realised I could get better results from iMovie which I had not used before. After importing the video clip to iMovie and creating a new project, it will play, just like in iPhoto, with the audio and same times allotted to each photo.
A timeline is shown, at the beginning of which is a small icon showing 4.8m (the actual length of the video clip), although the project information shows as only 4s.
Now I would like to further edit, adding Ken Burns to those photos that I didn't add it to in iPhoto. When I select to adjust, and select crop, I am given no further options. I cannot see how to add Ken Burns. I don't seem to have all the editing options I can see in iMovie tutorials.
Can anyone help me please? Will I need to start my project from the beginning again in iMovie to be able to use Ken Burns?
Similar Messages
-
IMOVIE THEMES, KEN BURNS EFFECT & VIDEO FX RENDER PROBLEM
Hi,
For some reason I can't seem to get any of the themes to render within iMovie HD 6, or the Ken Burn's Effect to render. The render bar just stays in the black & never goes red. I also can't render any of the Quartz Composer Video FX. Here the render actually completes but when you replay the movie the effect doesn't appear. Everything else works fine & I don't have a problem rendering anything else. The weird thing is that all of the above worked fine for me last year so I don't understand why it's giving me a problem now. I can see from this discussion group that quite a few people have experienced the same problem, but there doesn't seem to be one definitive answer. Just so you know, I've tried the following...
- Reinstalling iMovie HD
- Reinstalling QuickTime
- Using Software Update to update to the latest versions of everything
- Repairing disk & disk permissions
- Removing any 3rd party plug-ins for both iMovie & QuickTime
- Deleting the iMovie preferences file
- Emptying the Caches folder
- Moving my iMovie file to the desktop & reopening it from there
- Checking the file formats of my photos & movies are compatible
- Checking my screen is set to millions of colours
- Checking I have more than 10gb of disk space
- Logging in as different user
- Restarting my computer!
If anyone could shed any light on this I would be eternally grateful.
Many thanks,
Ed.I don't know whether QT 7.5 is your problem. Apple has upgraded that program to 7.5.5, which apparently cured some of the problems with the earlier version.
Some contributors to this forum have downloaded earlier versions of QT from this website:
http://www.digitalrebellion.com/blog/posts/listof_quicktimedownloads.html
in conjunction with another program called Pacifist. -
If anyone has done this before and knows how to keep ken burns and lose the shimmer I would appreciate your help.
Add some blur to the image. I know it sounds crazy, but blurring the photo will reduce the flicker on a TV. DVDs are really low res. and by reducing the image detail will help prevent line flicker.
-
IMovie HD6 Ken Burns Effect Not working
Hi. I've been using iMovie HD6 with my old iMacG4. We used Ken Burns Effect a lot with no problems.
I just got a 1 year old G5 iMAC with Intel Dual Processor and it has the latest versions of Tiger and iMovie 06. Everything works but the Ken Burns Effect. When I use the Ken Burns effect, it shows up when I set it up but when I push the button to make iMovie render the effect, the clinic does not render. It looks like the computer is about to render the effect but nothing happens and I need to force quit iMovie to do anything else. On the set-up of the Ken Burns effect, the preview shows the Ken Burns effect working.
I had a previous version of iLife O6 so I tried deleting the iMovie from the application and reloading the iLife 06 but this did not help. Because I don't have iLife 08, I cannot download a version of iMovie O6 to give this a try.
Any suggestions?
Thanks for your help, AndySince you just got a one year old computer, I would do the following:
1. Close iMovie and trash the file com.apple.iMovie.plist located in User/Library/Preferences. iMovie will create a new .plist file on relaunch.
2. Before you relaunch iMovie, do a permissions repair using the Disk Utility app on your Mac.
3. Make sure that you have sufficient free disk space for iMovie to operate efficiently -- 25GB is recommended.
4. Update iMovie and Quicktime to current versions, and do a permissions repair afterwards.
5. If you have any 3rd party plug-ins, or Quicktime plug-ins, move them to another folder to temporarily disable them.
With the Ken Burns effect, do not empty the trash until your project is finished. Emptying the trash will cause you to be unable to edit a photo to which the Ken Burns effect has been applied.
Hope the above helps. -
IMovie 10.0.4 imported video clips are blank and green?
I've imported video clips successfully from a VHS player & from a few DVD's to iMovie 10.0.4. However, the most recent DVD I've wanted to import doesn't work. The original DVD is in UDF format. I converted it to MP4.4 format, and the first time I played it in iMovie, it worked fine. But the second time I played it, the whole clip was super jittery like it was skipping every 0.5 seconds. Then the third time I played it, the clip was just a blank green screen. I've tried using the most recent version of HandBreak to convert the DVD to a different format that supposedly iMovie can read, but the same thing happens when it's imported into iMovie - just a blank green clip. What am I doing wrong?? Thanks all.
Same issue I've seen. I have a Sony DCR-TRV30. Had 40 tapes to transfer to iMovie 10.0.6. Had no issue on first 16 tapes then all the sudden I experienced the audio/video timing issue. Video looks good when it is getting imported, audio/video in sync on camera and in preview window on iMovie while importing. Tape finishes and you start to watch import when beginning of tape is in sync and by end it is several seconds out of sync. Tried deleting and installing iMovie again and that didn't help.
-
Trying to burn a video clip to itunes
I have two video clips that weren't purchased from iTunes on a burned DVD and I'm trying to put them into Itunes. I have an iPod with video so thats not the problem but it just wont put the files into iTunes. Could someone please help me?
The video will need to be converted into a format that your computer can read. HandBrake does a good job. Search for it and download it. Put in your DVD and run HandBrake, you should now just be able to convert the whole DVD or sections into mp4 or avi files.
Remember not to copy DVD's that are not yours! -
IMovie How do you join video clips that have been split
In Imovie project, How do I join video clips that been split
Hi
And if the clips are not contiguous - Then You have to do as in all versions of iMovie from the very beginning.
• Put the clips into one new project
• Export this as full quality QuickTime movie
• Import this new merged QT-clip into Your main project
This is a way around that are very basic and used whenever more elaborated scenes are prepared - e.g. multiple text clips or when in need of adding several functions into it.
Tedious - but it always been like this - in contrast to FinalCut.
Yours Bengt W -
Delete Ken Burns on multiple clips
I imported and sorted 150 pictures, then realized it had the Ken Burns effect on them. Is there a way to fix all these at once or do I have to reimport them with that effect turned off?
Thank you,
kboard6The easiest way is to reimport them. Especially if you already have them in an iPhoto album or event in the right order.
Set the Project Properties to something besides Ken Burns (either Fit or Cropped) and then reimport.
Otherwise I think you have to do it one at a time. -
IMovie - add arrow to highlight video
I am trying to add arrows to highlight my daughter in a sports recruiting video. I saw the information on this topic:
http://discussions.apple.com/message.jspa?messageID=12391949#12391949\
I was able to add one arrow to my project by following Karsten's instructions. But, I am unable to add additional arrows into my project (separate clips). When I tried to add the 2nd arrow, the arrow doesn't show up on the screen, and then there is a pause created where I put the first arrow. Anyone have any ideas how to fix this?John Cogdell wrote:
… But wasn't sure if you were online, so jumped in for you.…
I was, but busy 'evangelizing' some poor soul at the FCPX board …
Pizza? … nah, today, son#1 needs some healthy food (broccoli, huuuuu), …
enjoy your late-nite-dinner! -
I have a project that appears to be great until I export to either .M4A or .Mov and then everything looks like the cameraperson has had some serious seizures. What is odd is that the stabilization works great while working on the project in Imovie. Can anyone help? The content was captured using a Samsung HD video camera (flash memory).
DJim
Sorted.
I found a post elsewhere and the suggestion was to delete the projects folder. Then launching IMovie, the software creates a new projects folder, and I moved the projects in one by one, until I found the one that crashed it.
I suspect your solution would have been quicker however!
I just wish IMovie was less sensitive and just told me what the problem was!!
Thanks again. -
Burning multiple video clips on one disc
Hi Guys,
I have 12x3 minute music videos (about 300 mb. each) which I want to burn onto one DVD.
I am unsure of the correct method. I have tried using Toast but it didn't work.
The 12 videos have all been exported using Quicktime conversion and were shot in HDV.
Any help much appreciated. Thanks in advance.Should work. I do it all the time.
How is it not working?
Are you trying to make a DVD that will play on a set-top DVD player? Or just burn the files to a DVD disc for use on a computer?
Standard workflow - for a DVD that plays in a set-top DVD player:
Export a QuickTime movie from the editor without Conversion and Self-Contained.
Open Toast, click on the Video Tab
Choose DVD
Drag in file(s) to the Toast window
Set the menu (if you want one)
Click on Burn, Toast encodes the files for the DVD and then burns the disk.
MtD -
the Video just flies back onto desktop.
It should only have to do the full search the first time. From then on it should be quick.
Since yours is not, I would suspect that iMovie is not able to write the results of the search, so the next time it has to start from scratch. This could be a permissions issue.
Go to Disk Utility and try to repair permissions on your main hard disk.
You might also try trashing preferences. (Details here - https://discussions.apple.com/docs/DOC-4061 ) -
Can iMovie'11 view & edit HD video clips??
I am trying to find an answer to this question and have no success yet.
I had a real problem with this, having thrown away a PC and Pinnacle to upgrade to an iMac complete with the much raved about iMovie. After many many months of digging around, the only solution I have been able to establish is:
1. The codec Apple use (namely AIC) reduces the 'quality' of the HD video during the upload. I have .mts native files and the finished product proves to be a reasonable quality standard definition movie.
2. Final Cut Express uses the same codec.
3. Final Cut Pro uses a codec which Apple say will resolve the loss in quality, but for me as a keen enthusiast, makes the cost wholly undesirable and out of reach, besides being a very complex piece of software aimed at the pro.
4. Adobe's Premiere Elements 9 is a solution that will maintain the HD video image, together with 5.1 Dolby Digital surround sound. So, I would highly recommend this to you. Only issue from here on is that there are some handy functions in iMovie which you wont get in Premiere Elements, such as, the Date & Time stamp screen function.
All this to edit HD footage from a Sony video camera! Its a bit like inventing a car but oil hasnt been discovered
Good luck! -
In your opinion is it easier to add keywords to video clips in iPhoto move?
I just discovered keyword in iMovie and I'm loving it, but I noticed it is a recipe process, I'm used to adding keywords in iPhoto and it is so easy there with the shortcuts. Imovies keyword process doesn't seem as intuitive to me? I like to store my videos in iMovie library that way I can easily edit them and see them a ranged by date down the left side.if I stored them in iPhoto I believe iMovie can still see them but they just show up,as a bunch of clips in the iPhoto library section of IMovie,is that right. I'm pretty sure though that in iPhoto I can not add a keyword to only a part of a clip like I can in iMovie.what application do you guys use to add keywords to your video clips?
No, you cannot add keywords to parts of a movie, only the whole thing.
Regards
TD -
Ken Burns movie clips (not still photo)
How can I apply ken burns to movie clips. I know that the ken burns button only appears when we edit still photos, not movie clips. Is there any method to achieve an effect similar to ken burns? Or at least remotely similar?
iM's Bigger Brother FinalCutExpress allows such an effect by 'key framing' ..
Maybe you are looking for
-
I need to run a map against a particular dataset - how can i do it in OWB
Hello again :) I need to run a map against table on a particular dataset (WHERE clause) - how can i do it in OWB? The map is loading data from table A into table B (doing all sorts of wierd and wonderful things in between). Now table A had more (a lo
-
Condition 'or' on a read table
you can put a condition or the key of a table read example. READ TABLE i_bsid ASSIGNING <f_bsid> WITH KEY kunnr = <f_zppo>-kunrg belnr = <f_zppo>-belnr bldat
-
Problem with SQL to create a temp table to evaluate sort merge join
Can anyone help me with the below sql to enable the performance of the use merge join to be evaluated. This sql is placed in a file and ran from the prompt. timing start CREATE table testsql as SELECT /*+ USE_MERGE(t1000 t8000)*/ t1000, t8000 FROM t1
-
With Lightroom 4 I can't read any .DNG files directly into Photoshop CS. I have"camera raw 2.4" selected in LR and the Plug-in for CS is Camera Raw.8BI. Any suggestions on what to do? Thanks.
-
My MSI 955X built in networking is not working properly
Hi, I have many MSI 955X motherboards with the built in Intel Pro1000 and the broadcom 1 GB lan built on board. I have been having trouble getting these built in lan ports to work. I have updated the mobos bios to the latest. I have installed the lat