IMovie audio settings for FCP?

Hi there
I have had this question for a while, and never got to post it.
I often import my footage using iMovie, mainly because it is easier and lets me do a quick edit quite simply. When I then bring those clips into FCP I always need to render the audio. Does anyone know if there is a setting either in iMovie or FCP to avoid this?
thanks
Hannes

Hi Michael
Just as an update/conclusion, I tested it and both FCP and iMovie are pleased – no more rendering of the audio in the timeline. I now have an Automator workflow exporting all my .dv files to .mov, so soon I will be back on track.
Thanks for your helpful answer
-h.

Similar Messages

Output to XDCAM HD - Audio Settings for Final Sequence?

Hi,
If the approval gods are smiling, it'll be time to export several programs back to disc for a client in the next week or so. The original clips and the sequence are all at XDCAM HD 1080i60, 35Mbs VBR. I've ingested using Sony PDZ file transfer with a PDW-F75 deck, and everything looks/sounds great on approval QTs so far.
My question is on the audio settings for the final sequence on to XDCAM disc. I've got 2 tracks of talent audio, 2 of nat sound and 4 of music. If I understand the FCP manual correctly, I have to select 4 mono track outputs when doing a file transfer export of the sequence. What settings do I need to choose so that the mix I hear when I play back my sequence in studio is what anyone down the line will hear when they play back the final sequence I've exported to XDCAM disc? That is, if I've got 8 active tracks, what happens to them with the 4 mono track setting? Thanks very much for any suggestions and advice.
Pat

Agree that the HDV downconvert in the camera is optimal.. but the darn print to video needs to work reliably to GET the hdv material back to the camera
i still have to use iMovie to get my files back to the camera in HDV...
FCP 5.0.4 still doesnt work well

Need advise on best settings for FCP 7!

I am looking for some advice on the best settings for FCP 7 when I am syncing sound using pluraleyes, exporting into quicktime as one file and then importing that new file into FCP 7 for editing. I have noticed that sometimes my Quicktime files are very large (20 gb) and sometimes they are much smaller (130 MB), but I never changed the settings.
I am working on FCP 7 and shot using my Panasonic GH3 at 24 fps (which comes to 23.98). My frame size is 1920x1080. Compressor is H.264. Data rate: 8.6 MB/sec. Audio rate: 48.0 KHz. I have heard that FCP 7 does not properly deal with H.264. So, I am wondering, what should my settings be? Should I set to "Apple ProRes 422 (HQ) 1920x1080 24p 48 kHz"? Is there anything I need to know when I export to Quicktime 7 Pro in order to not reduce the quality of the video? Should I be changing my video files first before I even start to work on them?
I haven't edited in almost ten years so I am desperate need of some guidance!
Final Cut Pro 7, Mac OS X (10.6.8)

Hi Shane Ross,
Thanks for your help. So, I already synced all of my interviews in FCP 7 (using pluraleyes) before I changed the video to ProRess 422. Can I just go into FCP (in the same project) and compress the video footage, import the new video files and throw it into the timeline? Or will this cause issues? I tried this as a test and it seems to be okay but I just want to check that there aren't any issues that I am not considering.
Also, when I do compress, it seems to take forever (sometimes two hours). Is there any way to make this move along faster?
Thanks so much!

What are the best imovie, mpeg4 settings for making dvds?

What are the best imovie, mpeg4 settings for making dvds?

• iMovie'08 to 11
- Share to Media Browser - AND as Large (or Medium) - HD or other resolutions degrades the final result
iMovie'08 to 11 are not the tools of choise if quality is important as they all degrade the picture by discarding every second line when going from, Event's to Project's and this can not be mended.
iMovie HD6 and FinalCut delivers 100% of what any DVD-Authoring program needs.
• DVD is as standard MAX - intrelaced SD-Video - and can not be any better than this
• iDVD does only care about TIME / Duration as
iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
• iDVD Does Region = Zero (to be played everywhere)
• Frame rate - DVD can be in two types PAL (25fps) and NTSC (29.97fps)
If Your material is 30fps then keep to NTSC (29.97fps), if 25fps keep to PAL.
One can feed iDVD the other frame rate - BUT RESULTING DVD WILL BE BAD
I use JES_Deinterlacer (free on Internet) to convert all material to the same and final frame rate
• NTSC - US etc
• PAL - EU etc
Yours Bengt W

Best audio settings for mp3?

Hi everyone,
I was wondering what are the best audio settings for an mp3 to import into C4?
Thanks,
Tina

Yes Tina,
I had this issue before. here is what i found:
Record at Sample rate 44100 Hz, 16 bit, high quality publish as MP3
Captivate settings at near CD bitrate 96 kbps,
encoding speed 0,
44.100 KHz encoding frequency

Audio Settings for Premiere CS6

Hi, I currently run a Mac Pro with a 27 inch Apple Monitor with built in camera. The machine is also running Mountain Lion 10.8.5. Could someone give me some clarification as to why the Audio Settings for Premiere CS6 are the way they are?
Example with a Macbook Pro and an iMac when I plug in a headphone I can get the sounds from Premiere pro as well as something from youtube to the headphones. However in the case of the Mac Pro with the Apple Monitor, when the headphones are plugged in the youtube sounds come through but the Premiere sounds go through the monitor. I'm aware of the audio settings but I suspect this is working by design because of the different audio options the Mac Pro have and there is nothing broken about this.
Please advise.
Thank you.

I've always found this a bit annoying.
The intended behaviour is that if you go into Premiere's audio settings, and choose "System Default Input/Output", it should change along with the system (so that the audio comes out wherever YouTube does). In practice, I've found this to be inconsistent in pre-CC versions of Premiere (CC fixes this).
One tip that may be helpful for you in general on a Mac Pro:
1. If you don't already have the volume icon in the menu bar (by the clock), enable that in System Preferences > Sound.
2. Option-click on the icon and you'll get a quick menu of your output options

Dolby audio settings for Lumia 520

As every nokia Lumia windows phone 8 device has a Dolby audio settings with a equalizer in the settings menu, there are presets and a
custom one. This is not available in Lumia 520. This is utter discrimination,just because it is a low end Lumia device. If Nokia didn't want to give us Dolby audio settings, then why show a audio menu like in other devices and when we open its blank. This is teasing us. They shouldn't have put the audio settings in the settings menu for Lumia 520. Firmware. This is very bad nokia. Either update the firmware by removing audio from the settings or just give Lumia 520 users a equalizer. All the devices have the same chipset 520,720,620. A qualcom msm8227 with 2 krait cores and same adreno 305 gpu. But 520 doesn't have the equalizer , the other devices do have it. I expect a. Prompt reply. Nokia.

I am so disappointed with the way this lumia 520 turned out to be. There is no speed dial function, when even typing the numbers you have to type it,fully without the phone giving suggestions. There is no means to go forwards when using internet explorer, and you cannot set personal ringtones unless you use a computer or an app that does that. It is so messed up and uncool. I just hope all these are corrected in the amber update, speaking of which we don't even know when it would be released.

IPhoto Slideshow Export Settings for FCP 7

I made a slideshow using iPhoto '11 that I need to import into Final Cut Pro 7.0.3 so that it can be merged into a longer sequence with a few other things that will eventually be burned onto a DVD using Studio Pro and then set to play in a continuous loop.
My question is, what settings should I use exporting out of iPhoto? The photos were all taken with a Canon 5D. The sequence that I'll be importing the slideshow into will also have a sequence in it that was shot using the Sony HXR-NX5U. So, the native settings for that clip will be 1920x1080, square pixels, 23,98 fps, Apple ProRes 422 codec. I exported my iPhoto slideshow to match the settings as best as possible - 1920x1080 HD 16:9 was the closest option. I think the one difference is that the slideshow plays at 30 fps while the sequence matches the main video at 23.98 fps.
My issue is that the slideshow plays fine in iPhoto and even as a stand-alone movie loaded in QuickTime, but once I import it into Final Cut, I get motion artifacts. Even if I bring the slideshow into its own sequence, with the sequence settings matching those of the slideshow, the artifacts are still there. I can get rid of them using the Flicker Filter, but is there a way to resolve this issue during the iPhoto export? Should I be Deinterlacing the source video, leaving it as a progressive movie or selecting interlaced scaling? If it needs interlaced scaling, should I select upper or lower?
Or, are there better settings to get this slideshow to play better in Final Cut?

Yes. What we're setting up a booth at an upcoming event and have some promo videos we made, as well as the slideshows. The purpose of bringing them all into FCP was so I could put them all together in the timeline and export them as one big movie, which I'd them bring into DVD Studio Pro and set it to loop over and over.
Unless, of course, I could keep all the movies separate and create a "Play" button that plays movie #1, but modify the end jump to go to movie #2. Modify the end jump of movie #2 to go to movie #3, the end jump of movie #3 go to #4 and have the end jump of #4 go back to #1.
Would that work? If so, I can just put everything into Compressor.

Audio settings for airplay mirroring

I am using MBP late 2011 mountain lion OS x and just started using the 2nd generation of apple TV and the airplay mirroring work just fine but what I want to know is how make the audio only from the mac and not the TV when I play a video and have only the video playing on the TV so I can use the earphones on the mac?

I've always found this a bit annoying.
The intended behaviour is that if you go into Premiere's audio settings, and choose "System Default Input/Output", it should change along with the system (so that the audio comes out wherever YouTube does). In practice, I've found this to be inconsistent in pre-CC versions of Premiere (CC fixes this).
One tip that may be helpful for you in general on a Mac Pro:
1. If you don't already have the volume icon in the menu bar (by the clock), enable that in System Preferences > Sound.
2. Option-click on the icon and you'll get a quick menu of your output options

Using External Audio Device for FCP X

Hi,
How do I use my external audio hardware(RTA, MOTU, D01 Jünger) via firewire with FCP X?
It plays through Mac out only.
Cheers,
Marc

Hmmm... there is driver for all MOTU devices available. I checked on the motunation board and didn't find complaints about Lion and interfaces either. Sorry you're having this problem. This is copied from the motu site about the Lion driver:
MOTU Universal Audio Installer for Mac OS X
This package (version 1.6.50450) installs updated Mac OS X drivers and software for all MOTU FireWire, USB, Hybrid, and PCI-424 audio interfaces. The CueMix FX app now supports PCI-424 systems and replaces the legacy CueMix Console app. Mac OS X version 10.5.8 or later is recommended. Supports Mac OS X 10.7 (Lion). Supported MOTU products include:
2408mk3
24I/O
4pre
828mk3 (Hybrid and FireWire)
896mk3
8pre
Audio Express
HD192
MicroBook
UltraLite-mk3 (Hybrid and FireWire)
Traveler-mk3
Supported legacy MOTU products include the 1224, 1296, 2408, 2408mkII, 24i, 308, 828, 828mkII, 896, 896HD, Traveler, and the UltraLite.

Sony Z1U HDV Capture Settings for FCP 6.0

Hi, I am shooting a project on Sony's HVR-Z1U HDV camcorder at HDV 60i NTSC. Does anyone have suggestions for settings to capture the material into FCP. I have FCP Version 6, part of the FC Studio 2 upgrade.
Appreciate any feedback!

There are definiitely some advantages to editing in DV rather than HDV for easy workflow and faster renders, etc.
To capture, you'll have to get the settingns on the deck and in FCP to match. If you have the deck/camera set to HDV then choose the appropriate easy setup in FCP such as HDV 1080i60. If you want to capture as DV, then set the deck to downconvert to DV, and choose the DV NTSC easy setup. You'll want to check the anamorphic box for you capture settings and sequences, but keep in mind if your are working with DV or any SD format, that the anamorphic setting can be esaily applied to clips and sequences after creation or capture.
When you export your web clips with compressor, figure out a square-pixel frame size that is some multiple of 16:9.

Mpeg Streamclip DVD settings for FCP...trying to preserve quality

I'm very new at editing, so please bear with me!
I am creating a director's reel for myself using footage on DVD. I'm ripping the DVDs with MPEG Streamclip to DV NTSC then importing to FCP and finally exporting to DVD.
My problem is--there is an egregious quality loss through this process. Basically is there a better codec than DV NTSC to use in MPEG Streamclip?
I'm having to render my clips in Final Cut which leads me to believe I'm adding an unnecessary step of compression/de-compression. Also, the DV NTSC quicktime doesn't look so bad until I put it in Final Cut...then it looks awful. Am I messing up an import setting?
Finally-- When I load my clip in final cut it loads it anamorphic and I'm having to right click my clip after I load it to the bin, search it's video settings, and de-click "anamorphic" in order to get the right aspect ratio (16:9)...am I doing something wrong there?? Is that messing with the quality?
I realize that this is a basic question, but I literally have spent 3 hours searching for an answer and haven't found one, so please forgive me if it's repetitive! And obviously I'm stuck using the DVDs...I have no option to get the uncompressed original footage. Thanks!!

razini wrote:
I'm very new at editing, so please bear with me!
No problem, we all were at one time. Welcome to the family.
razini wrote:
I'm ripping the DVDs with MPEG Streamclip to DV NTSC then importing to FCP and finally exporting to DVD.
My problem is--there is an egregious quality loss through this process. Basically is there a better codec than DV NTSC to use in MPEG Streamclip?
Shouldn't be. But transcoding form MPEG2 to DV can get messy. I use DVDxDV for unwrapping MPEG2 form DVDs.
razini wrote:
I'm having to render my clips in Final Cut which leads me to believe I'm adding an unnecessary step of compression/de-compression. Also, the DV NTSC quicktime doesn't look so bad until I put it in Final Cut...then it looks awful. Am I messing up an import setting?
You should not be rendering in FCP, this suggests your sequence is not set to be plain ol' DV.
razini wrote:
Finally-- When I load my clip in final cut it loads it anamorphic and I'm having to right click my clip after I load it to the bin, search it's video settings, and de-click "anamorphic" in order to get the right aspect ratio (16:9)...am I doing something wrong there?? Is that messing with the quality?
If your clips are not anamorphic, your sequence is set incorrectly. Start with a new sequence and make sure it is set to DV.
razini wrote:
I realize that this is a basic question, but I literally have spent 3 hours searching for an answer and haven't found one...
Yeah, video is like that.
bogiesan

Ideal iMovie export settings for iPhone?

What is the proper setting for iMovie exports to the iPhone?
Obviously 480x320 is the desired target resolution, but I tried using "Quicktime" and encoding in h.264, but the video is not viewable on the iPhone. Alternatively, in selecting MPEG4, oddly h.264 was greyed out as not an option.
Anyone? I know the "iPod" settings work, but that is not the ideal iPhone screen resolution.
blakespot

I had the same problem getting iMovies over to my AppleTV and found a solution that works for iPhone too.
In iMovie click: Share>Share...>Quicktime (at top of box)>Expert Settings (under Compress Movie For)>Share (button at bottom of box)>Movie to iPhone (on Export: pick list). Click Save at the bottom of the dialog and you're off!
I used this to convert several of the movies I had on my AppleTV and put them on my iPhone.

Audio Settings for Premiere Pro CS4 during capture

During some other discussions regarding audio challenges with PP CS4 someone pointed out that if you analyze a file with G spot it should be in WAV format. I did this and I see my footage is showing PCM Audio at 48000Hz 1536 kb/s tot (2 chnls). Based on the fact that I record SD footage (audio selected to 16 bit 48k) onto a Mini DV tape on a DVX 100B and export via Firewire into PP CS4 does that sound right?
In the Preferences window I have Premiere Pro WDM Sound selected as the default device (Adobe default windows sound and creative ASIO are the other options) . The input and output in Audio Hardware Settings has the Buffer size sliding bar at about 25% across from the left and the Device 32-bit playback is unchecked.
I am just worried about what my dialog will sound like by the time it is edited in PP and send to Encore to export to DVD.
Thanks for any input you can offer.
Cole

GSpot should have shown the audio as WAV not PCM.
These are two different things. WAV is a computer file format for audio files, much like TXT is a format for text files or EXE is a format for executable files (programs). This is just the specifications for the file formatting on the hard drive. It applies to audio only files. Those which contain both audio and video will not be WAV files.
PCM (Pulse Code Modulation) is a method of encoding analog audio, turning it into a digital signal. This applies to both computers and separate components (CD players, DAWs, most cameras). It is the codec CDs use. It is also the standard for DV. Even most WAV files contain PCM audio.
http://en.wikipedia.org/wiki/Wav
http://en.wikipedia.org/wiki/Pulse-code_modulation

Audio file for FCP

Hi, ive got something I cut together in FCP and am having a professional voice over made for it. Im wondering what file format it would have to be in if I want the ability to edit the audio track later on (so i can see the actual track(s) itself) without just laying the 30 second clip in? Also, there are multiple tracks because there is the voice and then the underlying music and I need to be able to edit all of it. So in what format should i ask for the file?
thanks

AIFF, 48khz, 16 bit stereo. That is what FCP likes.
Shane

IMovie audio settings for FCP?

Similar Messages

Maybe you are looking for