IMovie automatically shuts down

my imovie app automatically shuts down - first thing that pops up is "The previous attempt to open this movie failed, do you want to ignore it?  No Yes are my options.  What ever I click, it still automatically closes imovie.

Hello, PDJAMC,
Welcome to the discussions.
Yes, you need to have enough drive space for iMovie to work. At least 25 GB free space is recommended. How much do you have? Are you creating iMovies on an external drive? If so, is it Mac-formatted?
Whenever iMovie acts up, it is a good idea to trash its preference file. Close iMovie. Go to YourUserName/Library/Preferences/com.apple.imovie.plist
If you also have iMovie 8 installed, be sure to locate the plist that is just imovie. iMovie 8's plist actually says 'imovie7'
Drag this plist to the trash. Reopen iMovie and see if it is better now.
You can also try repairing permissions on your drive, using Disk Utility.
If nothing helps, post back for more suggestions.

Similar Messages

  • My mobile phone is always automatically shut down at the time of the photo.

    My mobile phone is always automatically shut down at the time of the photo.

    Plug the device into a wall outlet and leave it for about 20 minutes. If it has not powered on at that point try a reset by pressing and holding the home and power buttons for about 15 seconds until the white Apple logo appears.

  • I have a late 2008 iMac with dual intels and the fans won't come on anymore.  About every 1 1/2 hours, it automatically shuts down to cool off.  Is there any way to manually turn it on?  Or, do they have to be replaced?

    About every 1 1/2 hours, it automatically shuts down to cool off.  Is there any way to manually turn it on?  Or, do they have to be replaced?

    I tried that with no improvement.  I think I might have to have the fans replaced.  do you know if this is a particularly difficult procedure?  Something wierd that I've noticed is that if I have a video on for more than several minutes, the fans comes on, and also when I am on a Skype video conference for awhile.  Otherwise, the fan jst doen't come on as the intels heaten up to the point the the auto shut down kicks in...any advise?  This definitely interupts my work!  Thanks for your help and input thus far!

  • When I start iTunes on my home computer (Not a MAC), it automatically shuts down, and gives me the message that the Data Execution Prevention security feature has shut it down...what to do?

    When I start iTunes on my home computer (Not a MAC), it automatically shuts down, and gives me the message that the Data Execution Prevention security feature has shut it down...what to do?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • HT1414 how can i open my iphone because when i try to restore it from my back up all the files it didn't open anymore & always my iphone have a problem that it automatically shut down then the itunes logo appear then i need it to connect to itunes then re

    how can i open my iphone because when i try to restore it from my back up all the files it didn't open anymore & always my iphone have a problem that it automatically shut down then the itunes logo appear then i need it to connect to itunes then restore to enable to open it..what should i do?i cannot bring it to the smart center because i lost my receipt..is there any chance to recover it?thank you so much..i already update my operating system to ios 6.1.3 but when i recover my  back up the operating system was ios 6.1.2..

    Your phone is in recovery mode. Did you plug it to the computer running itunes? What happend?

  • I can't export my video which contains only photos, sound tracks nor play it in fullscreen iMovie it shuts down. And now my whole file won't open at all it'll open with nothing inside ??

    I can't export my video which contains only photos, sound tracks nor play it in fullscreen iMovie it shuts down. And now my whole file won't open at all it'll open with nothing inside ??

    I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
    I am running Yosemitie on a  iMac.
    Paul

  • HT4061 my ipad automatically shut down and now i lost al savings and in-app purchases the battery was on 50% what happened and can i get my purchases back

    my ipad automatically shut down and now i lost al savings and in-app purchases the battery was on 50% what happened and can i get my purchases back

    Hi there,
    This seems very frustrating. An iPad can shut down randomally for many reasons, just like a computer can crash. If it begins to happen regularly, then do contact Apple, but there are no signs that your iPad is malfunctioning from just one shut down like this.
    But, you should be able to get all your in-app purchases back. In some apps, there is a 'restore purchases' button, which will download all the purchases you made for free.
    In some cases, you can tap to make the purchase again, and it will be downloaded at no charge, however this does not happen with consumable items such as coins and credits.
    I reccomend contacting iTunes Store Support at the link below, they will take a closer look at your purchases and give you further steps on redeeming them. They may also refund you if they have been lost.
    iTunes Store Support
    You can also contact the developer of the app, and report the crash and missing purchases. If you tell me the app, I'll give you the relevent contact in the developers.
    Other than that, sorry for the problems, and have a great day,
    Nathan

  • HT1455 I have started my computer in safe mode as recommended but not long after the grey Apple icon appears with the spinning gear it automatically shuts down! any suggestions?

    I have started my computer in safe mode as recommended but not long after the grey Apple icon appears with the spinning gear it automatically shuts down! any suggestions?

    Try these options:
    Credit Kappy.
    This support article addresses a 'blue scree';
    http://support.apple.com/kb/PH7212
    Ciao.

  • Why when I try to share a project iMovie is shutting down ?

    why when I try to share a project iMovie is shutting down ?

    While we all have MacBooks in this forum not all of us use iMovie. There's a iMovie Support Community where everybody uses iMovie. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/ilife/imovie

  • I recently updated a app on my iPad 2.it asked me to turn on an off my iPad so I did .now every time I turn it on the apple logo appears then it automatically shuts down an do the same untill the battery's gone ?

    I recently updated a app on my iPad 2.it asked me to turn it off then on so I did .now every time I turn it on the apple logo appears then it automatically shuts down an does the same untill the battery's gone ?

    You probably need to restore your iPad now. Pay attention to the last part of this kb article where it explains about using recovery mode. You may need to restore the iPad using that method.
    iTunes: Restoring iOS software

  • Is an immediate automatic shut down possible?

    Hi -
    Is there a way to override the Energy Saver automatic shut down timer so that the computer shuts down immediately? I'm referring to the dialog that appears with a count-down timer saying this computer will automatically shut down in 10 minutes.
    I'm having a bit of a problem staying up way too late on the computer and I'd like the machine to shut down immediately at a preset time, no matter what I'm doing -- kick me off, so to speak. I'm afraid I tend to just cancel the automatic shut down timer dialog.
    I realize I could risk losing some data doing this, but I need some sleep!
    Thanks experts, S.

    I don't think there is a way to immeidately shut down your machine other than the 10 minute countdown from the Schedule in the Energy Saver.
    Forum, correct me if I'm wrong.
    Sorry.
    Good luck.

  • My Hp Media Center PC M 7000 will automatic shut down

    My Hp Media Center PC M 7000 will automatic shut down when not in use reset the time & date. To start up, un plug the power supply over and over until it start up. Both fans work when it do start up. Changed the battery on the mother board, did not help

    urrein wrote: My Hp Media Center PC M 7000 will automatic shut down when not in use reset the time & date. To start up, un plug the power supply over and over until it start up. Both fans work when it do start up. Changed the battery on the mother board, did not help
    Hello urrein, Did you enter the BIOS and set the day, time, and year after you replaced the CMOS battery on the motherboard?
    Please click the White Kudos star on the left, to say thanks.
    Please mark Accept As Solution if it solves your problem.

  • EEM -automatic shut down or switch over of WAN link in OSPF when packet drop increase

    Hi,
    Need help..
    can any one help me how can EEM help for automatic shut down or switch over of WAN link in OSPF when packet drop increase a predefined level.
    I have a set up different branches connected together...OSPF is the routing protocol and need to communicate with two branches via hub locations.
    need to shut or switch some percent of traffic from primary to back up when packet drop in the link.

    I am not sure EEM can do what you want.
    Another option could be to use SLA tacking/monitoring. But you will fall back to the new route when you lose some percentage of pings, you can't switch only part of the traffic.
    I hope it helps.
    PK

  • While publishing an iMovie project iMovie unexpectedly shuts down, why?

    While publishing a project in iMovie, iMovie uexpectedly shuts down. Why?

    I've been having this problem with iMovie for a few months now, all of a sudden something has happened to my iMovie. It seems to happen only when I insert Picture In Picture option(s) in a slideshow. When exporting the completed Project to Quicktime it crashes. This also happens if I try to Finalize the Project or Share the Project via Vimeo or YouTube. There are a lot of folks out there experiencing this problem, some are finding solutions - I'm not.

  • Powerbook 17" G4 automatically shuts down in sleep mode

    Powerbook 17" G4 automatically shuts down in sleep mode intermittently. When press power button to bring it back up, it takes a very long time to reboot and the date is set to Dec 31, 1969. It comes back up finally, but this is irritating.
    Thanks for any help,

    Hi Reaskt
    Have you tried using Temperture Monitor to monitor your temps? Maybe it is overheating. Also it sounds like your backup battery is dead, that's why the clock reset's it's self. If you still have applecare I would give apple a call a soon I could. To me it looks like you would need a new logic board. I realy hope that you have applecare. Also have you tried an Erase and Install? Have you tried running Disk Utility booted from your install CD?
    Post back when you get more info
    Nic

Maybe you are looking for

  • Void multiple PY checks not through off cycle work bench

    Hello, We had a scenario where we had to void nearly 60 regular PY checks in our previous period. The postings to FI did not happen yet. We went to off cycle work bench and voided 60 checks one after the other. Is there any quicker way to void multip

  • How to store measurement data in a single database row

    I have to store time-data series into a database and do some analysis using Matlab later. Therefore the question might be more a database question rather than Diadem itself. Nevertheless I'm interested if anyone has some best practices for this issue

  • Can't remove Click to Call - causes issues in HTML...

    The new problem I'm having with Click to Call it is that if I'm working with an HTML editor (such as TinyMCE or a similar WYSIWYG editor) it adds the little click to call icon. In the source this equates to a ridiculously long string. You really need

  • Change PCR processes in MSS

    Hello Experts, i am using standard PCR processes like Change employee group and subgroup,change working time,Change position, etc. In PCR - Personnel Change Requests processes, i would like to remove/hide Request for Transfer and Request for Transfer

  • Iphone cannot be restored properly at all

    I tried restoring my iphone but it got stuck at recovery. I used a software called Tiny umberella to kick it out of recovery mode Then I restored the iphone but it forced me to upgrade to firmware 4.3.3 It cannot restore on my laptop. I tried restori