IMovie to iDVD-audio, slides and videos stuff up

Possess a Powerbook G4, DVD burner.
Did a project using clips and video clips. Share it with iDVD. Tried previewing it.
Audio plays and stops intermittently. Clips do not move and show sequentially. Audio keeps playing and stopping intermittently but clips and videos did not play as sequenced in iMovie.

thanks, it did work later. Now there is problem with
opening it after being burnt onto a disc. I tried
opening it but there was a message that says
"An error occurred while loading the project. This
project seems to be write-protected and cannot be
opened."
what happened?
What are you trying to open?
If you are able to burn the disc, you surely had the project open.

Similar Messages

How to synchronize audio track and video when transmitting by RTP

since the audio stream and video stream are transmitted separately on the network even if in a merged data, how to synchronize the audio stream and video stream at the receiving end ?

camelstrike wrote:
Hi everyone!
I've tried to make one of the processors, processor1, control the other processor, processor2, with processor1.addController(processor2) but I get a
javax.media.IncompatibleTimeBaseException. I need to synchronize audio and video rtp-streams because they are sometimes completely out of sync.
In JMF API Guide I've read:
"2. Determine which Player object's time base is going to be used to drive
the other Player objects and set the time base for the synchronized
Player objects. Not all Player objects can assume a new time base.
For example, if one of the Player objects you want to synchronize has
a *push-data-source*, that Player object's time base must be used to
drive the other Player objects."
I'm using a custom AVReceive3 to receive rtp-streams and then I create processors for the incoming stream's datasource's, and they are ALL PushBufferDataSource's.
Does this mean I can't synchronize these. If so is there any way I can change them into Pull...DataSources ?The RTP packets are timestamped when they leave, and they are played in order. You can't change the timebase on an RTP stream because, for all intensive purposes, it's "live" data. It plays at the speed the transmitting RTP server wants it to play, and it never gets behind because it drops out of order and old data packets.
If your RTP streams aren't synced correctly on the receiving end, it means they aren't being synced on the transmitting end...so you should look into the other side of the equation.

Audio Messages and Video

I was excited to see that you could finally send audio messages and videos.....but when I realized that you can only use this feature when you are talking to someone else who has an iPhone...it peeved me. I was trying to understand why I was not seeing the microphone feature to the right, as in the "Tips" app. Hope this is not the case. Anyone noticing the same?

Well, I just checked on my device, and it appears that the mic does not appear if I try a contact that does not have an iPhone. You could check the user guide here http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf and see if it provides any further information.

Can I create a presentation in iPhoto that will combine still slides and video?

I have just returned from a safari and have a lot of pictures and videos from the trip. I would like to create a presentation/slide show that will show the slides and also videos in the same slide show and allow me to manually pace the show. I know how to do this in PowerPoint but would rather use a more natice mac ap and thought it might be possible in iMovie or iPhoto but am not sure exactly what the best way to do this would be.

and allow me to manually pace the show. I know how to do this in PowerPoint but would rather use a more natice mac ap and thought it might be possible in iMovie or iPhoto but am not sure exactly what the best way to do this would be.
If you want a native Mac application for your slideshow you could also try Keynote, the Apple alternative to Powerpoint. It will give you similar presentation options.
Aperture - if you have it - would allow to trim the videos, allow more fine control over how the audio of the clips will be mixed, and still allow to manually pace the slideshow, but it is expensive and will no longer be developed. But if you have compatible versions of Aperture and iPhoto, simple open your iPhoto Library in Aperture: Aperture 3.3: Using a unified photo library with iPhoto and Aperture

IMovie to iDVD, audio is scrambled.

Greetings
I have been using iMovie to iDVD for sometime now, though I am no pro, I have never encountered this type of issue. I have about 100 clips which I are now in iDVD. While verifying the clips and titles, etc., I played a few of my 12 chapters. I noticed that the audio was 'scrambled'; the audio can't be understood at all! Too weird. (There is no problem with the video).
Now I must admit that I am using different audio tracks than ever. For much of the video, I have set the 'main' audio to 25 or 50%, while the secondary audio has music, which is set to 50 to 70%.
I can't seem to figure out why this is happening. And to clarify, 'yes' the audio and fades are great in iMovie.
Your help has always been helpful, I thank you now for your help in helping me figure this one out.
Martin

Martin,
Try going back to iMovie and use the command "extract audio"
This separates the audio and video in your DV stream. You should still be able to set volume controls. Then try again in iDVD.
Also check your audio (from the video) is it 16bit?
John

Can I combine still slides and video clips in a presentation?

I have just returned from a safari and have a lot of pictures and videos from the trip. I would like to create a presentation/slide show that will show the slides and also videos in the same slide show and allow me to manually pace the show. I know how to do this in PowerPoint but would rather use a more natice mac ap and thought it might be possible in iMovie or iPhoto but am not sure exactly what the best way to do this would be.

You can of course combine stills and videos in an iMovie project. You would have to manually stop and start the resulting video to "pace the show'. You could of course put blank stills or something similar in the video as a guides where to pause. iMovie has the advantage that you can do more with the video clips such as camera shake removal.
Geoff.

Multimedia Audio Controller, and Video Controller(VGA compatible) are missing on Windows XP(32Bit) SP3

Hi.
My Desktop Computer(Intel P 4, 512MB of RAM, and Graphics Card with 256MB of RAM)
Also, My Desktop Computer with P 4 doesn't have any access internet since there is no network adapter is installed. As a result, I would not be able to run the pc scan utility, or Reader a web-based applet that identifies my GPU or Audio controller
and finds the latest graphics driver for my GPU, and Audio.
I have two Windows XP installations:
Windows XP SP2(32Bit) which is old and it seems it infected by some viruses.
I have installed another fresh clean Windows XP(32Bit) SP3. However, I have two devices not detected well by Windows XP.
First of all, when saying that I have multi-operationgs systems, I mean there are two operating systems installed on my PC(SP2, SP3) both are 32Bit. The first Windows SP2(NOT installed by me) has all multimedia audio card installed well,
and has SCSI and RAID Host Controller shown the device manager. However, only the VGA is not installed on Windows SP2. However, the second one Windows SP3(Installed by me) has VGA not installed, Multimedia audio NOT installed, and there is no SCSI and RAID
Host Controller in device manager.
First: Yes, my motherboard has integrated video, and integrated audio card
According to the screen shots above, then
The vendor ID of Multimedia Audio Controller is 8086 and the device ID is
24D5.
The vendor ID of Video Controller is 8086 and the device ID is
2572.
I AM EXPECTING THAT KNOWING THE VENDOR ID AND THE DEVICE ID WILL LET ME QUICKLY FIND THE APPROPRIATE DRIVER. HOWEVER, I COULDN'T FIND THE APPROPRIATE DRIVER.
Thus, could you please help me to find them?
I have tried installing a soundMAX card driver, however, I found this error.
I have checked the other Windows XP SP2(32Bit) which is oder installed, and it seems it infected by some viruses.
However, the Multimedia Audio on that Windows is installed well. As here: I only posted these screen shots to show what kind of device is Multimedia Audio Card
The motherboard model is:
Belarc Advisor Computer Profile
Operating
System
System
Model
Windows XP Professional
Service Pack 3 (build 2600)
Install Language: English (United
States)
System Locale: Arabic (Yemen)
Installed: 22/03/2013 12:03:16
ص
Boot Mode: BIOS (Secure
Boot not supported)
Enclosure Type:
Desktop
Processor
a
Main Circuit Board
b
3.00 gigahertz Intel Pentium
4
16 kilobyte primary memory cache
1024 kilobyte secondary memory
cache
64-bit ready
Hyper-threaded (2 total)
Board: 775i65G.
Bus
Clock: 200 megahertz
BIOS: American Megatrends Inc. P3.00
03/20/2007
Drives
Memory Modules
c,d
39.99 Gigabytes
Usable Hard Drive Capacity
29.48 Gigabytes Hard Drive Free
Space
COMPAQ CD-ROM LTN486S [Optical drive]
3.5" format removeable
media [Floppy drive]
WDC WD400BB-75DEA0 [Hard drive] (40.00 GB) -- drive
0, rev 05.03E05, SMART Status:
Healthy
504 Megabytes Usable
Installed Memory
Slot 'DIMM0' has 512 MB
Slot 'DIMM1' is
Empty
Local Drive
Volumes
c: (NTFS on drive 0) *
20.98 GB
14.16 GB free
d: (NTFS on drive 0)
19.01 GB
15.33 GB free
<center>
* Operating System is installed on
c:
</center>
Network
Drives
None
discovered
Users
(mouse over user name for details)
Printers
local user
accounts
last logon
عايض
لرضي
19/01/2015 10:59:17 م
(admin)
local system
accounts
Administrator
never
(admin)
Guest
never
HelpAssistant
never
SUPPORT_388945a0
never
<center>Marks
a disabled account; Marks
a locked account </center>
Controllers
Display
Standard floppy disk
controller
Intel(R) 82801EB Ultra ATA Storage Controllers
Primary IDE
Channel [Controller]
Secondary IDE Channel [Controller]
None
discovered
Bus
Adapters
Multimedia
Intel(R) 82801EB USB
Universal Host Controller - 24D2
Intel(R) 82801EB USB Universal Host
Controller - 24D4
Intel(R) 82801EB USB Universal Host Controller -
24D7
Intel(R) 82801EB USB Universal Host Controller - 24DE
Intel(R)
82801EB USB2 Enhanced Host Controller - 24DD
None
discovered
Virus
Protection [Back to Top]
Group
Policies
Norton AntiVirus Version 18.1.0.37
 Virus Definitions Version Not Up To Date
 Realtime File Scanning
On
None
discovered
Communications
Other
Devices
↓ Realtek RTL8139 Family PCI Fast
Ethernet NIC
Status:
Cable unplugged
Dhcp Server:
none responded
Physical Address:
00:19:66:1F:F7:54
USB Human Interface
Device
Standard 101/102-Key or Microsoft Natural PS/2
Keyboard
HID-compliant mouse
USB Root Hub (5x)
USB Storage Use in past 30 Days(mouse
over last used for details)
Hosted Virtual Machines (mouse over
name for details)
Last
Used
SanDisk Cruzer Blade, s/n
4C532000020502112303, rev 2.01
19/01/2015
09:32:57 م*
USB 2.0 USB Flash Drive, s/n
59309e92e21612, rev 0.00
09/01/2015
12:29:17 ص*
<center>* Possibly used again before the reboot following this
time.</center>
None
discovered
See your entire
network map...
click for Belarc's System Management products
A man should convert his anger and sadness into strength to continue living in this life.

Dont worry, dont think anyone was as a matter of fact
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=908&jump= true#M908
http://support.microsoft.com/default.aspx?scid=kb;en-us;80509
http://support.microsoft.com/default.aspx?scid=kb;en-us;84567
that worked for me, maybe it will help someone else that went through what i did, its a miracle i did not top myself after going through all this BS. ALSO dont threaten your computer with violence, cos it will always call your bluff which makes things worse

Screen Share, Audio Chat and Video Chat not working

Hey everyone.
I recently started having issues with using some of the iChat protocols over AIM with a friend of mine.
I can send IMs and files perfectly, but I can't get Audio Chat, Video Chat or even Screen Sharing (both ways) to work. After a while I get: "Failed to start Screen Sharing because: Screen Sharing could not be established." I also get the exact same message when trying to Audio chat or Video chat.
If anyone knows the answer to this problem please help us...
Thanks in advance
DJ Schep

Is this with a Speedtouch ?
Is this you http://discussions.apple.com/thread.jspa?threadID=1668357 ?
11:48 PM Monday; August 18, 2008

I have no audio when i video stuff

No audio on my videos any ideas? already reset it

This did not help anything! I have no option of a audio volume slider. You will have to be more specific. There doesn't seem to be an option anywhere to turn on the mic for recording.

Flash player audio chirps and video delays

When playing recorded videos the audio "chirps" and sounds
like a tape deck with the speed varying. The video is anywhere from
1 to 3 seconds behind the audio.

Found this in Techsmith's Camtasia forum, dated 1-10-08,
posted by one of the Camtasia developers:
"We've also been working with Adobe Flash Player TechSupport,
who has been very responsive and helpful. They have confirmed the
bug, and escalated it as a high priority issue to their engineers.
We're hoping that it can be fixed in a future version of the Flash
Player."
FWIW.

How to add Audio Formats and Video Formats in one movie?

Now that FCP X will not allow different settings how would I change the Audio Format and the Video Format to one movie in Compressor 4?
When I change the Audio to ACC I have a sound file and when I change the Video Format to HD 720 I get the movie but with the original sound.
Any help is always appreciated.

Sorry for this one also. Just finally searched the Inspector windoe in Compressor 4. It is already there.

Audio buzz and video cut-out caused by volume shadow service errors during updates and other services that create shadow copies

I have this issue and see throughout the Internet that my problem is shared by large numbers of other Windows 7 users, and a few Windows 8 users.
I also see that Microsoft has not addressed the issue.
I've been troubleshooting the problem for 13 months and across 3 separate hard drives on 2 separate computers, with the help of tech escalation from both Carbonite and Dell (whom I wanted to eliminate as causes, and who have been kind enough to assist even
after being eliminated as causes because they evidently care about customer service).
Over 13 months we have run system diagnostics, reinstalls and repairs to no avail. We have been able to reproduce the event in the absence of every attached device, every installed program, every subscribed service, and every hardware type and configuration.
We have visited chat rooms showing that this is a widespread problem (e.g., http://superuser.com/questions/630033/audio-video-glitch-when-shadow-copy-service-starts), and that even professional server administrators simply consign themselves to VSS being "the
bane of backup software" (http://community.spiceworks.com/topic/229743-problem-with-vss-writer-system-writer-timed-out).
Yet regardless of the computer or the configuration, the problem persists. It causes characteristic and alarming disk write error and memory spikes on the Resource Monitor that can be traced to huge numbers on the System 4 and VSSVC.exe processes, occurring
every time the Volume Shadow Copy Service and Application Experience create a restore point during an automatic update of Adobe, antivirus, etc.; and one can even provoke an event simply by manually creating a restore point, which has the bonus of triggering
an 8220 notice that the Volume Shadow Service has run out of time while deleting files. And the only advice I've seen from MS is that this is a "normal condition."
It is not normal to be unable to enjoy audio and video. And it is certainly not normal for one's PC to continually degrade with every update until it becomes unable to update and must be replaced.
I am on my 3rd computer with this problem (different type and configuration each time), and Dell has offered me an upgrade to Windows 8 in the hopes that the problem will not recur there. But I see from Microsoft's tech chat that Windows 8 users are reporting
the problem as well (http://answers.microsoft.com/en-us/windows/forum/windows_8-pictures/after-upgrading-to-windows-8-pro-there-is-an/813432c2-14f1-463f-bba3-ad322ceb6e00).
Please, please post a real answer to this problem. Thank you.

Hi,
Above all I understand the frustration as a same issue persists for a very long time.
At first I'm thinking if it is directly related to the application CrashPlan some customers mentioned in one of the threads you provided. However I then noticed that you said it could be also reproduced by creating a System Restore point.
Currently I cannot find a Windows 7 system so I used a Windows 8.1 laptop (also Dell) for testing.
I tried to play an online video and also a local video with creating a restore point in the middle. However I failed to reproduce the same behavior.
The following screenshot was captured in second test (play a local video):
I cannot confirm if it is because we have a large physical memory (8GB), or Windows 8.1 resolved this issue. From the screenshot, memory is not spiked (actually it is almost not changed).
So in current situation you can test to enlarge the size of physical memory (and virtual memory) for test if available. And as Dell provided a Windows 8 system, you can try it before and after installing Windows 8.1.
As a support engineer I also hope to help fix the issue or at least find out the cause. Later I will try to find a Windows 7 system for testing as well.
In addition, please understand that as the issue occurs mostly in Windows 7, though it seems related to VSS, it is still a Windows client system issue. So you can post the question to Windows 7 forum for further information. Here is the link:
http://social.technet.microsoft.com/Forums/en-US/category/w7itpro/
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Any easier way to linking audio-a and video-v files?

Hi everyone
I've received some DV-Clips from a friend of mine who captures his videomaterial into split audio and video files. Now I don't like working with these split files and would like to relink these into one file with audio and video integrated. And if possible do this in some kind of batch function.
I could export the corresponding audio and video files from final cut into one file. But seeing that there are quite alot of clips to manage, that's seems a bit of a boring task. Any ideas? I've tried looking through my manuals and asking help, but haven't found anything yet.
Cheers!
Steve
G5 Dual 2 GHz Mac OS X (10.4.6) Final Cut Pro HD 4.5
G5 Dual 2 GHz Mac OS X (10.3.9)

Will Apple L link them?
You could nest or add the audio to the video at the QT level via QT player and re-import.
I work with them split almost always, remember hit bb to bring up the razor all. This will chop both at the same time.

Project Help: Working with slides and video

I'm trying to create a flash video that will incorporate powerpoint-like slides along with video footage.
So for instance I will have slide 1 (graphic) - slide 2 (video clip) - slide 3 (text).
I have used CS4 before for one of my classes but that was a little while ago, and I feel like I'm starting over again.
When I import the first graphic (.png), is there an option to have it resize to fit the stage?

I have everything the way I want it except one thing. I have a picture along with text on a slide. I'd like to fly in the picture. It's been a while since I've created motion tweens, can anyone refresh my memory as to how I can have the picture fly in while the text stays put?
Also, does anyone know if it's possible to do dancing text like the "Saved By the Bell" logo (at the 1:02 mark in the video)?
http://www.youtube.com/watch?v=kHKvruzbWl4

IMovie to iDVD audio problems

Hello,
I am using iMovie '09 (version 8.0.4). I have created a movie with mp3 audio files playing in the background with the clip volume at 0. The video clips are interspersed with some images every now and then as well as transitions. The movie plays quite well when i preview it in iMovie.
I then share the movie with iDVD (version 7.0.4). When I play the movie in iDVD, almost the entire thing plays perfectly except for this one little part. In that little part, audio from some clip starts playing along with the background music.
More things about my project:
1. I am using audio ducking only once, I know where it is in the timeline and it is working just fine
2. Where the problem occurs, I have looked if I might be doing something wrong in precision editor. Turns out I am not using precision editor on the clips where the audio problem occurs at all
3. All video clips around where the porblem occurs are at a volume of 0
I am confused. Please help.
Thanks.

Hi
*No audio on DVD disc.*
Most common origin.
1 Imported audio from iTunes.
• In iTunes copy out as an audio-CD .aiff
• Use this in Your movie project
2 Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
3 Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
4. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies—except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format—that I have noticed.
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple Disk Util tool
• OR burn with Roxio Toast™ if You got it
Yours Bengt W

IMovie to iDVD-audio, slides and videos stuff up

Similar Messages

Maybe you are looking for