Impact on Registered Events when delete node

Currently I have a node which has more than one database and also has many events registered against multiple database.
Due to Agent out of sync error I am currently getting, I have to delete the node and rediscover it. If I do it then I need to find out what would happen to all of the registered events against the databases of this node. Do I have to create and registered all those events again.
Let me know if anybody has answer to this.
Thanks.
CHetan

It is completely absurd that the Calendar changes times when traveling to a different time zone. It's a safe bet to assume that many Blackberry user's are business people. Surely if Blackberry was serious about keeping it's users, it could design software to keep the calendar times as they should be while still updating to the new time zone.
After all, if I make a 10:00 appointment for when I will be in AZ (even though I'm on the East coast), the appointment is going to be at 10:00, and should not show as 7:00 or 8:00 (depending on the time of year) when I arrive there and change time zones. For flights, I input the correct times in the calendar, and repeat5 the times in "Notes" so that I will have the correct flight times regardless of the time zone change. Is is a difficult thing to do--of course not. Should I have to when the phone runs several hundred dollars--of course not!
It seems that RIM's OS has many faults which are equally frustrating, and it chooses not to address them.
Unless RIM gets it's act together, this will most likely be the last Blackberry I will own.
Too bad--it could be a great tool!

Similar Messages

  • Trigger events when delete/modify certain folder in KM

    Dear Experts,
    I have a requirement like when certain folder is being deleted/modified I want an event need to be trigger, such that I will put some checks before these commands performed.
    Basically my requirement is, I have a custom iViews created and are using custom tables in databse.  When I create the folders in KM, I am creating/maintaining these folder reference in my custom tablese using my custom iView.
    Now when I delete the folder from KM, I want to show some warning message before deleting the folder and simulatenously these folder references should also be deleted from my custom tables.
    Please give me suggestions how to acheive the above scenario.
    Thanks in Advance,
    Chinna.

    Hi Yogalakshmi,
    I have created a Repository service using the document provided. I have registered the pre_delete_template  event using the below code         
    unregister(this,ResourceEvent.PRE_DELETE_TEMPLATE);
    I am printing some trace when this event occurs. Logs is being displayed after the folder gets deleted.
    Can you please provide me some code snippet for register predelete event, and on attempting to delete I would like to pop up a window with warning/confirmation message (confirmation popup window). Based on the confirmation from the popup window -- Ok/Cancel, I would like to perform few operations.
    I don't find any documents on Repository Services.
    Could you please provide me code/documents that fulfills my requirement.
    Thanks
    Chinna.

  • Trapping key Event when DELETE is pressed in the JTAble

    I want to trap keyEvent when i press DELETE Key in the JTABLE.

    Hi,
    you could use InputMap and ActionMap, like below:
          // Read the maps
          InputMap inmap = yourTable.getInputMap(JComponent.WHEN_ANCESTOR_OF_FOCUSED_COMPONENT);
          ActionMap actmap = yourTable.getActionMap();
          // Build the action
          Action yourAction = new AbstractAction() {
             public void actionPerformed(ActionEvent e) {
                //... your event code here...
          // Map DELETE key to the action
          inmap.put(KeyStroke.getKeyStroke(KeyEvent.VK_DELETE), "Delete");
          actmap.put("Delete", yourAction);I didn't try this with a JTable, but it works perfectly with JList and JTree...
    Hope this will help,
    Regards.

  • Impacts on the DPs when deleting a secondary site

    HI,
    I am having problems with a secondary site and the recovery with CU2 is not working for me. I am at the point of deleting the site, rebuild the server and reinstall the Secondary Site.
    My question is, What will happen to all my DPs which are assigned to the SS site code I am about to blow away? Will I need to rebuild the DPs or will they find the site if I use the same site code.
    Thx Rob

    Why delete the site?
    I would go for the following procedure:
    - Backup content library
    - Rebuild the server (same name)
    - Restore content library
    - Install SQL (same version/instance)
    - Site Administration > Recover Secondary Site
    Once the site has been recovered it should sync with the remote DP's again as before.

  • Why are random calendar events being deleted from my iphone when I sync it with ical?

    My settings are such that events entered on both devices should push to both devices when I sync. The events being deleted from my iphone are not consistent (ie. older than a certain date), they are random.

    This happens to me INCESSANTLY.  I'm looking at my calendar events one second, and POOF!, the next second all of the events I've entered into the calendar- with the exception of birthdays that are on the actual contact information for a person- are GONE.  My calendar settings are set to sync all events- no timeframe- and always have been.  This happened to me nonstop on my old iPhone 3GS, and I was sure it was the phone causing this issue.  Now, I have my new iPhone 5 in my hands and same ol'   , different equipment.  I have done EVERYTHING I can think of to prevent this from happening or to restore the data- including rebooting, holding home button and on/off at same time, etc.- and NOTHING works to restore the data.  And then, just as magically as the data disappeared, POOF!- the data is back randomly sometime later.  That "later" may be 5 mins, a day, several days.  This is an absurd and EXASPERATING glitch that APPLE NEEDS TO FIX IMMEDIATELY!!!  I'm starting to hate the iPhone and Apple in general when I continuously experience HUGE glitches like this that have a profound impact on what you're trying to accomplish within a feature that you DEPEND on... yet Apple has "never heard of that problem before".  You suck, Apple.  Don't send your problems out into the real world, to users who just gave you $800 for another glitchy piece of equipment that never solves your software issues.

  • Cl_gui_alv_tree no child nodes after registering event

    Hey guys,
    I have an uncommon problem with cl_gui_alv_tree.
    My tree has 2 layers, Root and child. Both of them have layout-class  cl_gui_column_tree=>item_class_checkbox.
    Everithing works fine! (without_events.jpg)
    But if I register event "checkbox_change" with method SET_REGISTERED_EVENTS the childnodes disapear! (with_events.jpg)
    Does anyone know a solution?
    here's some code:
    data; gr_alv_0200 type ref to cl_gui_alv_tree.
    METHOD init_dynpro_0200.
         DATA: ls_hierarchy_header TYPE treev_hhdr.
         IF gr_cont_0200 IS INITIAL.
           CREATE OBJECT gr_cont_0200
             EXPORTING
               container_name              = 'CC200'
             EXCEPTIONS
               cntl_error                  = 1
               cntl_system_error           = 2
               create_error                = 3
               lifetime_error              = 4
               lifetime_dynpro_dynpro_link = 5
               OTHERS                      = 6.
           IF sy-subrc <> 0.
             MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
           ENDIF.
         ENDIF.
         IF gr_alv_0200 IS INITIAL.
           CREATE OBJECT gr_alv_0200
             EXPORTING
    *         lifetime                    =
               parent                      = gr_cont_0200
               node_selection_mode         = cl_gui_column_tree=>node_sel_mode_single
               item_selection              = 'X'
               no_toolbar                  = 'X'
               no_html_header              = 'X'
             EXCEPTIONS
               cntl_error                  = 1
               cntl_system_error           = 2
               create_error                = 3
               lifetime_error              = 4
               illegal_node_selection_mode = 5
               failed                      = 6
               illegal_column_name         = 7
               OTHERS                      = 8.
           CHECK sy-subrc EQ 0.
           ls_hierarchy_header-heading = 'Hierarchy Header'.     "#EC NOTEXT
           ls_hierarchy_header-tooltip =
                                  'This is the Hierarchy Header !'. "#EC NOTEXT
           ls_hierarchy_header-width = 100.
           ls_hierarchy_header-width_pix = ''.
            tree_create_fcat( ).
           CALL METHOD gr_alv_0200->set_table_for_first_display
             EXPORTING
               is_hierarchy_header = ls_hierarchy_header
               i_background_id     = 'ALV_BACKGROUND'
             CHANGING
               it_outtab           = gt_treenodes
               it_fieldcatalog     = gt_fcat_0200.
           DATA: lt_events TYPE cntl_simple_events,
                     ls_event LIKE LINE OF lt_events.
           ls_event-eventid = cl_gui_column_tree=>eventid_checkbox_change.
           APPEND ls_event TO lt_events.
           CALL METHOD gr_alv_0200->set_registered_events
             EXPORTING
               events                    = lt_events
             EXCEPTIONS
               cntl_error                = 1
               cntl_system_error         = 2
               illegal_event_combination = 3.
           SET HANDLER me->on_tree_checkbox_change FOR gr_alv_0200.
         ENDIF.
       ENDMETHOD.
    METHOD tree_add_node.
         DATA: ls_node_text TYPE lvc_value.
    * set item-layout
         DATA: lt_item_layout TYPE lvc_t_layi,
               ls_item_layout TYPE lvc_s_layi.
         ls_item_layout-fieldname = gr_alv_0200->c_hierarchy_column_name.
         ls_item_layout-style   = cl_gui_column_tree=>style_intensifd_critical.
         ls_item_layout-class   = cl_gui_column_tree=>item_class_checkbox.
         ls_item_layout-editable = 'X'.
         APPEND ls_item_layout TO lt_item_layout.
    * add node
         ls_node_text =  is_data-name.
         DATA: ls_node TYPE lvc_s_layn.
         ls_node-n_image   = space.
         ls_node-exp_image = space.
         CALL METHOD gr_alv_0200->add_node
           EXPORTING
             i_relat_node_key = iv_parent
             i_relationship   = cl_gui_column_tree=>relat_last_child
             i_node_text      = ls_node_text
             is_outtab_line   = is_data
             is_node_layout   = ls_node
            it_item_layout   = lt_item_layout
           IMPORTING
             e_new_node_key   = ev_node_id.
       ENDMETHOD.
    in my current class I've method on_tree_checkbox_change to handle the event. If the event is registered, the method gets called.

    Solved by my own:
    I had to implement method get_registered_events( ), append the new event to the table and call set_registered_events( ).
    The table from get_registered_events( ) is already filled with events.

  • Strange behavior when deleting XML nodes

    I am developing a thermocouple product builder for a client.  I have an XML file that looks like this:
    <thermocouple>
      <step id="step1">
        <property name="CALIBRATION">
            <option code="K">TYPE-K (CHROMEL-ALUMEL)</option>
            <option code="J">TYPE-J (IRON-CONSTANTAN)</option>
            <option code="N">TYPE-N (NICROSIL-NISIL)</option>
            <option code="T">TYPE-T (COPPER-CONSTANTAN)</option>
            <option code="E">TYPE-E (CHROMEL-CONSTANTAN)</option>
            <option code="S">TYPE-S (PLATINUM-PLAT 10% RH)</option>
            <option code="R">TYPE-R (PLATINUM-PLAT 13% RH)</option>
            <option code="B">TYPE-B (PLAT 6% RH-PLAT 30% RH)</option>
            <option code="C">TYPE-C (TUNG 5% RE-TUNG 26% RE)</option>
        </property>
      </step>
      <step id="step2">
        <property name="MATERIAL">
            <option code="1" ncw="JEC">INCONEL 600</option>
            <option code="2" ncw="NSRBC">304 STAINLESS STEEL</option>
            <option code="3" ncw="NSRBC">316 STAINLESS STEEL</option>
            <option code="4" ncw="NSRBC">310 STAINLESS STEEL</option>
            <option code="5" ncw="NSRBC">446 STAINLESS STEEL</option>
            <option code="6" ncw="JNESRBC">NICROBELL-B</option>
            <option code="7" ncw="JNESRBC">NICROBELL-C</option>
            <option code="8" ncw="JNESRBC">HASTELLOY-X</option>
            <option code="9" ncw="KJNE">TANTALUM</option>
            <option code="22" ncw="JNE">ALUMINA</option>
            <option code="33">MULLITE</option>
            <option code="44" ncw="KJNE">MOLYBDENUM</option>
        </property>
      </step>...etc.
    </thermocouple>
    As each step is loaded, an XMLList is culled from the XML file for that step, and then that XMLList acts as the data provider for a combobox.  When the first step has been completed, a flag called "calCode" is set using the @code attribute from the step 1 data.
    Steps 2 through 4 have some options that will not work with certain calibration types from step 1.  So I added another attribute to those options, @ncw.  This stands for "not compatible with".  If a calibration code exists inside a certain option's @ncw attribute, that means that option should not be included in the XMLList that is the data provider.  Here's the code I wrote to do this:
    myXml = thermoData.lastResult.step.(@id==myStep).property.option ; /* Initialize the XMLList */
                if(calCode) { /* If the calCode flag is set */
                    for(var i:uint=0;i<myXml.length();i++) { /* For each item in the XMLList */
                        if(myXml.@ncw[i]) { /* If the @ncw attribute exists in the current item */
                            if(myXml.@ncw[i].match(calCode)!=null) { /* If the calCode is found in the value of the @ncw attribute */
                                delete myXml[i]; /* Delete the current item */
    Here's where things get screwy. If I choose Type C in the first step, the resulting XMLList for step 2 should be very small because that calibration type is only compatible with a few materials.  It should look like this:
    <option code="9" ncw="KJNE">TANTALUM</option>
    <option code="22" ncw="JNE">ALUMINA</option>
    <option code="33">MULLITE</option>
    <option code="44" ncw="KJNE">MOLYBDENUM</option>
    However, when I test it, it looks like this:
    <option code="2" ncw="NSRBC">304 STAINLESS STEEL</option>
    <option code="4" ncw="NSRBC">310 STAINLESS STEEL</option>
    <option code="6" ncw="JNESRBC">NICROBELL-B</option>
    <option code="8" ncw="JNESRBC">HASTELLOY-X</option>
    <option code="9" ncw="KJNE">TANTALUM</option>
    <option code="22" ncw="JNE">ALUMINA</option>
    <option code="33">MULLITE</option>
    <option code="44" ncw="KJNE">MOLYBDENUM</option>
    It seems to be deleting every other item in the XMLList where the calCode exists in the @ncw attribute, instead of every item.  Does anyone know why?  I am only an intermediate ActionScript programmer, and this is my first Flex project ever, so I'm totally willing to accept that I could have made a huge mistake somewhere.  I can post the entire source code if you want to look it over... it's pretty long and I'm rubbish at commenting.  Thanks!

    I figured it out.  This is probably a pretty amateur mistake.  By checking each node in turn and deleting it if there is a match, I'm unintentionally changing the index number of each subsequent node.  So if myXml[1] gets deleted, all the other nodes have their indices reduced by one, but the loop counter continues to increment, so the node that was 2 is now 1, and it never gets checked.  I think instead of deleting nodes I need to treat the master XMLList as a source and move the non-matching nodes to a duplidate list that will then act as the data provider.

  • Iphoto deletes events when adding events from flagged photos

    Dear community,
    Whenever I use flagged photos, previous events get deleted. I don't know whether this is because the photos can only be in one event at a time, or that this is erroneous behaviour.
    In my logic, there should be possibility for as much events as you deem possible, yet it is mind boggling, that you don't have an automatic option, that makes you put photos in two events. Also it is mind numbing that you can't just copy & paste the pictures anywhere you like. You can paste in albums, but not into events.
    You have an option to "Create event from flagged photos", yet not an option to add photos to an existing event, you must flag them first.
    Then there is the sudden discomfort of brain pain, when you find out the previous events you've created stopped seizing to exist, and you have to sift through 500 photos, just to find 3 photos you've flagged in the creation of a previous event. Which defeats the purpose of creating them.
    The albums work good for this purpose, yet I want to be able to pin albums to the back board, where the events are. Or have events that will not disappear, may contain doubles with other events, or/and aren't restricted to copying into them. It would save a lot of time, to just CMD + C, CMD + V.

    You're confusing Events and Albums.
    In my logic, there should be possibility for as much events as you deem possible, yet it is mind boggling, that you don't have an automatic option, that makes you put photos in two events
    A photo in two Events is using twice the disk space. An album just references the photo in the Library and can be in as many albums as you like while wasting no disk space.
    You have an option to "Create event from flagged photos", yet not an option to add photos to an existing event, you must flag them first.
    Eh, you have to flag photos first before you can create an Event from them too...
    Then there is the sudden discomfort of brain pain, when you find out the previous events you've created stopped seizing to exist, and you have to sift through 500 photos, just to find 3 photos you've flagged in the creation of a previous event. Which defeats the purpose of creating them.
    Flagging photos does not delete Events. Emptying an Event deletes them.
    You can't have what you want.

  • Raise event when user select a node or leaf of a recursive tree

    What is the event when user choose a node or leaf of a recursive tree? When I select the tree node / leaf it does not raise the event in OnAction. Thanks!

    Hi,
    TreeNodeType and TreeItemType have ONACTION event assocaited with them. This event gets called when the node or leaf is selected by user. Put a break point in these method, then you'll call to know if they are actually getting called or not.

  • Titles or Music in Project Shift when deleting unused clips from Event

    When deleting unused clips from an Event ("Move Event to Trash | Delete Unused") the Titles and/or the Music / Voiceover shifts in time within the project built from clips in that Event. Sometimes, the music slides later, so instead of starting at the beginning of the project, it's slid over by 20 or so. Other times, the music stayed anchored, but the titles moved to later times. In some cases, the titles not only moved, but streched in time, so that a 5 second title placed at 10 seconds into the project, became a 47 second title, starting 35 seconds into the project! This has happened to four projects and I just verified again as part of this posting that it is still an issue. Easy enough to slide the clips and music back where they belong but now it says "Itunes" and "YouTube" is out of date; they are not - it's iMovie that got confused.

    You're performing a 'Ripple delete' by using the DEL key. Use the DELETE key to perform a 'Lift delete'. The DELETE key is located just above the backslash key.
    -DH

  • When to Close Refnums Used in Input to 'Register Events'

    Hi,
    Can I close a refnum to a control right after registering the event for it or do I need to close it later when I close the 'Event Registration Refnum'?
    I've attached an example VI (and a picture of it) where it is closed before and after.  I get no run-time errors.
    Thanks,
    Albert
    LV 2011
    Attachments:
    EventControlsExample.PNG ‏27 KB
    EventControlsExample.vi ‏13 KB

    Hi Albert,
    If you read the help file for the Register Events function you will see that when you register a particular event it will stay registered until you unregistered it or your VI stops running. 
    http://zone.ni.com/reference/en-XX/help/371361H-01/glang/register_events/
    This is why the Close Reference VI after you register the event does not cause any issues. The second Close Reference VI is unnecessary since you already closed the reference with the first VI.
    Regards,
    Josh B
    Applications Engineer
    National Instruments

  • All my calendar events were deleted when I clicked iCloud in settings. How do I get them back?

    All my calendar events were deleted when I clicked iCloud in settings. How do I get them back?

    I think I was syncing... I just flipped that switch to the right and it "turned on calendar" but when I went to my calendar everything was gone.
    When I go back now it doesn't do anything.

  • Problem with register event callback in use of instrument control

    now, i use the register event callback to register a value change of a boolean control on the front panel, and wire the cluster's ref of the instrument control parameters to the user parameter input, then create the callback vi. In the callback vi, i select the pump-control subvi, and pass the user parameter to the subvi. The problem is that,  when i press the boolean control, the instrument (here is pump) can act, but immediately, the code crashes.
    I use labview 8.6
    Attachments:
    callback vi.png ‏8 KB
    register event callback.png ‏8 KB

    You would wire the event registration wire that comes out of the Register for Events node into an event structure.  You will need to right click on the event structure and check off "Show Dynamic Event Terminals" and it into that.  Then you can create a new Event Case that uses the dynamic event.  You can place your subVI in that event in whatever way you want.  (Just drop the subVI in or do a Call by Reference there, or whatever.)  Look in the Example Finder for "Dynamically Register for Events.vi".

  • Bug: halt when deleting unneeded update files

    If WSUS installed on a heavy IO loaded harddrive (LUN) of a VM, when deleting unneeded update files by Server Cleanup Wizard, MMC node may halt.
    Server OS: Windows Server 2012 Standard
    Errors can be located in Event Log:
    An unhandled exception occurred and the process was terminated.
    Application ID: /LM/W3SVC/1881423753/ROOT/ServerSyncWebService
    Process ID: 3288
    Exception: System.NullReferenceException
    Message: Object reference not set to an instance of an object.
    StackTrace:    at Microsoft.UpdateServices.Internal.DataAccess.GetRevisionIdListForCache(Int64 deploymentChangeNumber, Int64& highestChangeNumber, CategoryIdCacheEntry[]&
    newCategoryDeployments, CategoryIdCacheEntry[]& deletedCategoryDeployments, RevisionIdCacheEntry[]& newRevisionDeployments, RevisionIdCacheEntry[]& deletedRevisionDeployments)
    at Microsoft.UpdateServices.Internal.RevisionIdCache.UpdateCategoryAndRevisionIdCache(Int64 deploymentChangeNumberAtRefresh)
    at Microsoft.UpdateServices.Internal.ServerImplementation.UpdateCache()
    at Microsoft.UpdateServices.Internal.ServerImplementation.DatabaseChangeHandler(Object byTimer)
    at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
    at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
    at System.Threading.TimerQueueTimer.CallCallback()
    at System.Threading.TimerQueueTimer.Fire()
    at System.Threading.TimerQueue.FireNextTimers()
    Application: w3wp.exe
    Framework Version: v4.0.30319
    Description: The process was terminated due to an unhandled exception.
    Exception Info: System.NullReferenceException
    Stack:
    at Microsoft.UpdateServices.Internal.DataAccess.GetRevisionIdListForCache(Int64, Int64 ByRef, Microsoft.UpdateServices.Internal.CategoryIdCacheEntry[] ByRef, Microsoft.UpdateServices.Internal.CategoryIdCacheEntry[]
    ByRef, Microsoft.UpdateServices.Internal.RevisionIdCacheEntry[] ByRef, Microsoft.UpdateServices.Internal.RevisionIdCacheEntry[] ByRef)
    at Microsoft.UpdateServices.Internal.RevisionIdCache.UpdateCategoryAndRevisionIdCache(Int64)
    at Microsoft.UpdateServices.Internal.ServerImplementation.UpdateCache()
    at Microsoft.UpdateServices.Internal.ServerImplementation.DatabaseChangeHandler(System.Object)
    at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
    at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
    at System.Threading.TimerQueueTimer.CallCallback()
    at System.Threading.TimerQueueTimer.Fire()
    at System.Threading.TimerQueue.FireNextTimers()
    Faulting application name: w3wp.exe, version: 8.0.9200.16384, time stamp: 0x50108835
    Faulting module name: KERNELBASE.dll, version: 6.2.9200.16384, time stamp: 0x5010ab2d
    Exception code: 0xe0434352
    Fault offset: 0x00000000000189cc
    Faulting process id: 0xcd8
    Faulting application start time: 0x01cdcff0fa98da3e
    Faulting application path: c:\windows\system32\inetsrv\w3wp.exe
    Faulting module path: C:\Windows\system32\KERNELBASE.dll
    Report Id: 332ed25c-3c39-11e2-93f1-005056b26389
    Faulting package full name: 
    Faulting package-relative application ID:
    Step to repo:
    1 Open Update Services MMC.
    2 Click Options from the left panel.
    3 Select Server Cleanup Wizard from the right.
    4 Press Next.
    MMC node MAY(only when lots of files need to be deleted) be prompted to be reset when deleting unneeded files if it's running longer than usual. Re-open Update Services MMC will fix it. But
    it will be appeared again another day when many unneeded files exist.
    Eternal Snow

    Nothing to me indicated that his previous disks weren't functional.
    In the very first two lines of the first post of this thread, the drive was described as "heavily loaded". Specifically the scenario was:
    If WSUS installed on a heavy IO loaded harddrive (LUN) of a VM
    Running the Server Cleanup Wizard, particularly performing the "Delete unneeded updates..." action is a highly database intensive action. If that task is competing for IOPS on the disk system, then there's absolutely a high probability that the task
    will "timeout" before the stored proc being called can complete it's task.
    The "fix" is to put the application on a properly equipped machine.
    If the guys who wrote the system can't create it to not fall over if the HDs it's on happen to be a wee bit slow, then yes it's a bug and they've written it badly.
    We're not talking about "a wee bit slow", though, are we?
    As for timeout issues, it's a natural artifact of a WSUS server these days. Read every tenth thread in this forum and somebody is having issues with timeout errors.
    There are two contributing factors. The first is that the number of updates currently contained in the MU catalog is about 100x the number of updates that existed when WSUS v3 was originally written in 2007.
    The second is that in 95% of the cases, the administrator reporting the issue failed to properly performed needed administrative and maintenance activities on the WSUS server over the lifespan of the server.
    Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2013)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence R Garvin
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • Why do my calendar events get deleted from my iphone while I'm viewing the calendar?

    I my work schedule in the calendar on my iPhone4S (iOS 5.0.1) earlier today.  While trying to review when I work, I saw all 5 calendar events get deleted.  There are no longer any events on the days that I added work to my calendar.  Anyone else experience this and know how to fix it or recover the events? This is the second time my work schedule has been deleted right in front of my face on my phone.

    This happens to me INCESSANTLY.  I'm looking at my calendar events one second, and POOF!, the next second all of the events I've entered into the calendar- with the exception of birthdays that are on the actual contact information for a person- are GONE.  My calendar settings are set to sync all events- no timeframe- and always have been.  This happened to me nonstop on my old iPhone 3GS, and I was sure it was the phone causing this issue.  Now, I have my new iPhone 5 in my hands and same ol'   , different equipment.  I have done EVERYTHING I can think of to prevent this from happening or to restore the data- including rebooting, holding home button and on/off at same time, etc.- and NOTHING works to restore the data.  And then, just as magically as the data disappeared, POOF!- the data is back randomly sometime later.  That "later" may be 5 mins, a day, several days.  This is an absurd and EXASPERATING glitch that APPLE NEEDS TO FIX IMMEDIATELY!!!  I'm starting to hate the iPhone and Apple in general when I continuously experience HUGE glitches like this that have a profound impact on what you're trying to accomplish within a feature that you DEPEND on... yet Apple has "never heard of that problem before".  You suck, Apple.  Don't send your problems out into the real world, to users who just gave you $800 for another glitchy piece of equipment that never solves your software issues.

Maybe you are looking for

  • Performance & Auto-write XMP

    I've noticed over the past week that people have been seeing subpar performance with auto-write XMP turned on while running Lightroom. I think this warrants a more detailed response from the team. Most people using auto-write will experience a minor

  • Disconnecting phone line upon answering a call

    Hi all, I have recently had a phone line installed in my new flat and am using a 2.0 Home Hub and 2.1 Home Hub Phone. Everything works perfectly with the broadband, all the blue lights are on and this appears to be fine when making an outgoing call.

  • Master data text load failure?

    Hi all, My process chain for master data text has failed and i am getting the below error message? error records written to the application log error 4 in the update. pls advise me on this what should i do? thanks Pooja

  • Prioitize a certain block of code, when called?

    I have an animation of a panel (just a one-color rectangle) that slides, while some images load up, behind it. The sliding has a noticable hitch, probably because of all the loading going on behind it. Is there a way to tell Flash to prioritize the s

  • Apple TV vs. YouTube

    Earlier today, I tried to view videos from my YouTube channel using my Apple TV. This had worked flawlessly before. I went to watch my videos, and discovered that I wasn't logged in to YouTube, so I tried to login to YouTube. I thought I was using th