Implementing Fiancial Analytics using JD Edwards as a source

Hello Experts,
I am implementing Financial Analytics using JD Edwards Enterprise One as source. I am in the process of configuring the .csv files. I don't find few .csv files under informatica/server/infa_shared/SrcFiles folder. Where can I find the missing files to populate the data? After I configure all the csv files and run the ETL. What needs to be done at the RPD level? Is there any changes requried at the RPD level? If so, where can I find the documentation for that. Any help or direction would be greatly appreciated.
Thanks in advance,
RK

Hi,
Thanks for the reply. I found the files in the LkpFiles folder. After, I set up all the csv files then run the full load. Is there anything need to be changed/setup in the RPD?
Thanks,
RK

Similar Messages

  • Has anyone implemented Oracle Pricing Analytics(7.9.6.4) with source EBS

    Hi all,
    Has anyone implemented Oracle Pricing Analytics(7.9.6.4) with source EBS?
    Need urgent help!
    Thanks in Advance

    Hi Kashi,
    Thanks for your response. However, we are implementing Oracle Price Analytics using universal adaptor for EBS as source.
    In BI apps 7.9.6.4, one approach is to populate the csv files and load using universal adaptor. Can anyone tell me what are the tables in EBS that I need to consider to populate these files for pricing analytics?
    Are there any SQL queries available to populate pricing csv files?
    Any help will be appreciated.

  • Need info for Implementing Service Analytics

    Hi ,
    My clicnet is planing to implementing service analytics, i would like to know the procedure is that where to start what to needs to be install.
    We are going to use sibel applications and what are the things to taken care while installing a BI Apps for service analytics. We are plaing to instal 7.9.6.3
    Please do let me know the procedure.
    Regards,
    Malli

    2 corrections :
    a) Veera not verra
    b) What I sent you is bi apps config guide that will have info related ebs,siebel, People soft and jde, check this link which is from 11 chapter as I said earlier
    http://docs.oracle.com/cd/E20490_01/bia.7963/e19039/config_service_analytics.htm#BABBJFGB
    I appreciate if you mark as correct

  • I tried to implement photo albums using iweb and got a publishing error.

    I tried to implement photo albums using iweb and got a publishing error. All was fine with my site until I added the photo album page. The software doesnt say what the error is exactly, only that it is a publishing error to my ftp
    Exact message "There was an error communicating with the FTP server. Try again later, or check with your service provider."
    If I reduce the albums inside to 1 then it seems to work but that takes away from the usefullness of multiple albums.
    my iWeb version is 3.0.4 (601)

    Publish your site to a folder on your hard drive to see if the publication will proceed successfully and open the site locally with your browser to confirm all of the alums are there and work.  If they do try the following:
    delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
    go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
    Click to view full size
    launch iWeb and try again.
    If you're still not able to publish from iWeb to your server download and use the free  Cyberduck to upload your website files to the server. Users have found that CD has been successful when iWeb had problems.
    OT

  • Help!!! How to implement a special useful button in tool bar?

    How to implement a special useful button in tool bar, when the button is clicked, then a menu shows under the button, just like the Internet Explorer's back button and forward button, there is a black arrow at the two buttons right, when click the black arrow, a menu shows under the back button or forward button, how to implement this in java?
    Please help!!!
    Thanks!!!

    Like an enhanced JComboBox?
    ;o)
    V.V.

  • Implement Naming convention using code inspector

    Hi,
    We have to implement naming convention using code inspector,if anybody has already done it plz help
    me inunderstanding the problem.
    help is appreciated.

    We're also using the code inspector for naming conventions.
    Try this link:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/nw/how to build a new check for the code inspector
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/evaluating the quality of your abap programs and other repository objects with the code inspector

  • Implementing caascading prompts using web elements

    I am implementing caascading prompts using web elements for two dropdowns PL and MPLl. If a value is selected
    from PL corresponding values are selected from MPL.
    I am using following code in sub report
    1) shared stringvar PL;
    if instr(PL, field1 + "|") = 0 then PL := PL + field1 + "|";
    2) shared stringvar MPL;
    if instr(MPL,"||" + field1) = 0 then MPL:= MPL + "||" + field1 + "|";
    if instr(MPL, field2 + "|") = 0 then MPL:= MPL + field2 + "|";
    3)
    shared stringvar PL:= PL[1 to length(PL)-1];
    shared stringvar MPL:= MPL[1 to length(MPL)-1]; MPL:= replace(MPL, "|||", "||");
    I am using following code in Main report
    1) whileprintingrecords;
    shared stringvar MultiSelectfont;
    shared stringvar PL;
    WESelectCascade ("Product_Line", PL, "Product_Line|MPL", {?Product_Line}, "ALL", true, "4.25cm", MultiSelectfont, "", "");
    2)whileprintingrecords;
    shared stringvar MultiSelectfont;
    shared stringvar MPL;
    WESelectCascade ("MPL", MPL, "Product_Line|MPL", {?MPL}, "ALL", true, "4.25cm",MultiSelectfont, "", "");
    PL has 3 values {ED,Motors, services} ED has 8 values for MPL, Motors has 2 values for  corresponding MPL and services has 2 values for corresponding MPL.  when ED is selected in PL dropdown it is giving 6 values in MPL drop down instead of 8 values.   when Motors is selected in PL dropdown it is giving 2 values in MPL drop down which is correct.   when Services is selected in PL dropdown it is giving 4 values in MPL drop down instead of 2 values.   2 values from services and 2 values from ED. i.e. First selection remaining 2 values are added to last selection i.e. services.
    Any Ideas appreciated

    what are the values of the 2 shared variables?
    i.e. if you un-suppress the formulae in the subreport that generate the 2 shared variables, then copy and paste using the Further Markup Possibilities > Markup/Result > code tags (to the right of the Message)  so that we can see the entire code.
    what could be happening is that there are duplicate values in the 2nd level...each value has to be unique. if they are not unique look into using the Ext (extended) cascading sets where a Display and a Value are used.

  • Implementing SPI protocol using PXI-7833R

    Hello everyone,
    I'm trying to implement SPI protocol using PXI-7833R, so that it should behave as a SPI master and should be able to communicate with a SPI device (treated as slave).
    Now I already found an example, but the problem is, this example uses cRIO-9103 as FPGA target and in my case I'm going to use PXI-7833R as FPGA target, and when I'm changing the target (from cRIO-9103 to PXI-7833R), I dont know how to map I/O's listed under 'Chassis I/O' (under cRIO) to the new target (which is PXI-7833R).
    I am not allergic to Kudos, in fact I love Kudos.
     Make your LabVIEW experience more CONVENIENT.

    Hi All,
    Somehow I was able to change the target (from cRIO to PXI-7833R).... but now I'm getting an error while trying to compile the code.
    The error description is:
    "Multiple objects are requesting access to a resource through a resource interface from both inside and outside the single-cycle Timed Loop, which is not supported.
    Place all objects requesting access to the resource interface either inside or outside the single-cycle Timed Loop."
    I am not allergic to Kudos, in fact I love Kudos.
     Make your LabVIEW experience more CONVENIENT.

  • Explain how to implement prompt functionality using @variable

    Hi all,
    Anyone please explain how to implement prompt functionality using @variable.
    We got some sql reports.Those reports have to be converted into BO free hand sql report.
    Please provide any best practices for converting sql reports into BO free hand SQL.
    Thanks & Regards,
    James Charle

    Hi
    Please refer "@Variable" section  in page number 601, in http://help.sap.com/businessobject/product_guides/boexir31SP3/en/xi31_sp3_designer_en.pdf
    Regards
    Ashwini

  • How to implement route cipher using java?

    Hi guys,,,
    I really got a headache solving how to implement route cipher using java lang,,i already got the concept but i really dont get how to implement it using java actually i want to make a presentation of how route cipher works using "adobe flash" but first i will implement it using java coz flash actionscripts are closer to java lang.
    Hope you could post some examples or ideas...i would really appreciate it!
    thank you so much...

    just add an action listener (either keypressed or keytyped) to the frame that you want to record. I did this in NetBeans in about 2 seconds. I can simplify it if you need. As for loging it just write the characters to a file output stream.
    public class test extends javax.swing.JFrame {
        /** Creates new form test */
        public test() {
            initComponents();
        /** This method is called from within the constructor to
         * initialize the form.
         * WARNING: Do NOT modify this code. The content of this method is
         * always regenerated by the Form Editor.
        // <editor-fold defaultstate="collapsed" desc=" Generated Code ">
        private void initComponents() {
            setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
            addKeyListener(new java.awt.event.KeyAdapter() {
                public void keyTyped(java.awt.event.KeyEvent evt) {
                    formKeyTyped(evt);
            pack();
        // </editor-fold>
        private void formKeyTyped(java.awt.event.KeyEvent evt) {
            System.out.println(evt.getKeyChar());
         * @param args the command line arguments
        public static void main(String args[]) {
            java.awt.EventQueue.invokeLater(new Runnable() {
                public void run() {
                    new test().setVisible(true);
        // Variables declaration - do not modify
        // End of variables declaration
    }

  • Can i implement RS422 protocol using 7831 RIO card

    please tell if i can implement RS422 protocol using NI FPGA card. Also please help me on how to do the same...

    You can definitely implement the RS-422 protocol on the FPGA card. Check out the RS-232 on FPGA example on DevZone. RS-422 may be a bit different than RS-232, but not very much. The main thing you will have to deal with are the voltage levels of the signal. The FPGA DIO are single-ended 3.3V TTL, while RS-422 is a differential voltage signal. So to have a true RS-422 interface you will need to add a signal translator between the FPGA card and your RS-422 device(s).
    Christian L
    Christian Loew, CLA
    Principal Systems Engineer, National Instruments
    Please tip your answer providers with kudos.
    Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
    or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
    to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense

  • Using OBI answers report as source in BIP report

    All,
    I am creating a BIP report using OBI answers request as source. I defined the data set, created RTF template from MS word and uploaded the same into BIP.
    I am using dashboard prompts for this reports. I have 2 issues with this.
    1. When I embed the BIP report in the dashboard along with BI answers report, the BIP report is not retrieving data when different metrics are selected in the prompts. for ex: grams and Kgs.
    The logic to apply the factoring on data is already implemented in OBI. When i change the dashboard prompt, it is changing the data in BI answers report and not in BIP report. I am wondering why this might be happening. If you have any thought please share.
    2. The BI report has some saved filters applied which uses some presentation variables in the filters. But those seem to be not effecting in BIP report. Please suggest any reasons and fix for these.
    If any one have idea, please suggest.
    Many thanks in advance.

    The BI answers request contains saved filters, in which some filters have presentation variable and a default value set for the same. we are using this as source for the BIP report data set.
    In this case the answers request is working correctly based on the prompt value selected where as the BIPub report is not working. The BIP report is working for only the default value. If we change the prompt for that parameter, it is showing no rows.
    How BIP takes care of such answers request based reports?

  • Can you use SQL as a data source for a project in the same way you can in Excel?

    Excel allows you to create a data source that executes a SQL stored procedure, display that data as a table in a spreadsheet and have that data automatically refresh each time you open the spreadsheet. Is it possible to do the same thing in MS Project, displaying
    the data from the stored procedure as a series of tasks?
    Here's what I'm trying to do - I have a stored procedure that pulls task data meeting a specific criteria from all projects in Project Server. We're currently displaying this data as an Excel report. However, the data includes start dates and durations so
    it would be nice to be able to display it as a Gantt Chart. I've played around with creating a Gantt chart in Excel and have been able to do a very basic one, but it doesn’t quite fit our needs.

    No, You can not use sql as a data source for a project.
    You have 3 options to achieve it:
    1. You can create a Sharepoint list with desired column ,fill desired data in that list then you can create a MS project from Sharepoint List.
    2. You can create a SSRS report in which you can display grantt chart Joe has given you that link.
    3. You can write a macro in MPP which will take data from your excel. In excel you will fetch data from your stored procedure. write a schedule which will run every day to update your data or
    create an excel report in which will update automatically and write macro in mpp which will fetch the data then publish it so that it would be available to team members.
    kirtesh

  • Using 2 web services data sources in the same report

    I've been trying unsuccesffuly to use 2 web services data sources in a report. The main report accesses the first web service to get job summary information. 3 fields are are passed as parameters to a sub-report and used as parameters for the sub-report selection. Each report works fine independently, but when I link them together the subreport alway fails to retrieve data.

    Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

  • How to use iPhone 4 as video source...?

    I need to use iPhone 4 as video source for iMovie and FrameByFrame. http://web.mac.com/philipp.brendel/Software/FrameByFrame.html
    It's odd that Apple's products don't recognize each other.
    I can hook up several brands of old crappy camcorders without issue, but I can't use the HD video from my Apple branded device.
    Has anyone discovered a work around?

    Read the section of the User Guide on "Personal Hotspot".
    See page 24 of the following: http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Maybe you are looking for