Implicit enhancement for report painter reports(For GRR3 and CJE3)

Hi,
We have a client requirement to add 5 fields (In selection screen) to report painter reports ( Reports of CJE3 and GRR3 ).We created Z reports as a copy of standard reports, added required 5 fields by implementing SAP notes and other settings.We have also done implicit enhancement for all these reports to make change in the behaviour of new fields.This is working fine in the development client but the problem is once we transport this to other client new reports get generated( With new name ) and implicit enhancement will be lost.
For eg:in development client for CJE1/CJE2 report the program name will be "GPAVPSATWFP4NN0YRDBIQBHI8MQ"
but when we transport it to other client new program "GP8O1UCNZTJYY5LTO8GN0UW2GQB" is generated in which implicit enhancements are not found.
Can you please suggest how to handle implicit enhancement in such cases? Or what is the correct way to transport it.
Thanks in advance
Regards,
Shekhar

Hi,
Thanks for the quick reply..
I have already done implicit enhancement as you said ,my problem is to transport it to another client.
I have implemented implicit enhancement for one report lets say it as "ABC", and i transport it to another client with all the enhancement. But in another client new program "XYZ" is getting generated for same report( dynamic programs ), so my implicit enhancement is present but its applicable to "ABC" program but not for "XYZ".
Can you please suggest how can i handle this??
thanks in advance,
Greeshma.
Edited by: Accgreeshma on Jan 23, 2012 3:04 PM

Similar Messages

Data for Report Painter report

Hi Gurus,
I have a report painter report S_ALR_87013019 . This uses the
Library 602 (gr23), report - 60BU-001 (GRR3).
Need to create a regular report based on this, Can you Please tell from which tables the values are getting retrieved by this report painter report, or in general on how to trace back the tables used by the report painter.
Also if it uses Set ID as inputs for fetching data, is there a way to get the setid/setclass value.
Thanks,
Regards,
Raman

Hi
The As on Date balance cant be cumulated...
Eg; you bought inventory worth 10 million in Current year and as of now you have 4 million worth of inventory in stock
Cumulated bal in this case is 10 mil and As on Date balance is 4 million... 4 million is what you will get in SAP reports
The same Key figure which shows values in comp code currency can be used
br, Ajay M

Report painter report in portal - Excel output in SAP GUI for HTML

Dear sirs,
I need your expertize. I would like to let my users display (Excel in place)/ save the result of my report painter reports into MS Excel. I have found notes 499262 a 314568, but didn´t understand the message (or there is no message:)). Does that mean I cannot use Excel in place together with Report painter and SAP GUI for HTML?
Second question: is there a place (user exit in generated code? I don´t even know what I am looking for) to get the data provided by the report painter engine and send the retrieved data to some custom function (to be able to call the Adobe form, to save it as a text file or any option how to manipulate the resulting data...?).
thank you for your time and effort,
regards Otto

Hi Otto,
You can send print the report to the spool and then use RSTXPDFT4 program to convert this spool to PDF file. Alternatively, you can export the spool to spreadsheet or ASCII file via SP01 transaction.
Additinally, I'm not aware of unability to use Excel output with SAP GUI interface.
Regards,
Eli

Change the default setting for report painter reports.

HI All
Can we change the default setting in SAP/R3 in the report painter reports for the selection screen options?
If yes,Please let me know how we can change the default settings.
Thanks in Advance
Best regards
Venu

HI
We have a report developed in the report painter for profit center accounting and we have selection screen for this report.
Few of the selection screen fields parameter are set by default and we need to change the default setting for the selection screen fields parameters.
How and where do we set or change the default parameters for the selection screen ?
Thanks in advance
Best Regards
Venugopal

Selection screen control for a field in the report painter report

Hi,
Could you please advice me as to how we can add exclude selection functionality for a field on the selection screen of a report made by trhough report painter report.
Your prompt reply will be really appreciated.
Thanks,
Ramesh.

look at this code and try
select-options : S_NODEID for ZNODETAB-ZNODEID.
at selection-screen on value-request for s_nodeid-low
perform f4_nodeid using 'S_NODEID-LOW'.
at selection-screen on value-request for s_nodeid-low
perform f4_nodeid using 'S_NODEID-HIGH'.
end-of-selection.
FORM f4_nodeid USING    p_field.
declare it_node.
select znodeid from ZNODETAB into table it_node.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'ZNODEID'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      dynprofield     = p_field
      value           = space
      value_org       = 'S'
      display         = 'F'
    TABLES
      value_tab       = it_node
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
endform

T.Code for Report painter report

Hi,
Is there a way to assign a T.Code to the Report painter report, so that users do not have to go to GR53.
thanks & Regards
Rose

thanks Eli, I tried this in Sandbox and it looks good.
You seem to know a lot about Report Painter, I hope you would be able to certainly help me understand this :
My predecessor here, created a report painter report and then asked the ABAP team to copy the report painter program (its like a query name) to a Z Prpgram and assign a transaction code. As I hear this was done to avoid the authorization issues.. (???) when this was moved to Testing Dev client, all this worked But when we moved this to QA, the error "program doesnot exist" made us to change the zprogram to remove the logic that the program had to check for the Client, in which the report was created. We removed that but then it then includes started giving the same error. so this will surely not work.
So, my question is : when this simple way of giving a report painter report a t.code with the defaults, would there be any auth issues that you can think of ???
thanks in advance.
Regards
Rose

Transaction Codes for Report Painter Reports

Hi,
Can any bodu assist on how can we create a link for the report painter report and the transaction code for the same.
Also is there somthing to be taken care while getting the same transported to another client.
Thanks & Regards,
Ankur Goel

Hi,
Thanks for response.
Actually I created the Transaction code and get the Report and Transaction code transported but when i executed the transaction code in the Receiver Client i gave run time ABAP error.
let me give example:
a) I created the Library, Report Group & Report in my Developement Client.
b) Using SE93 i assigned the program name of the Report to transaction code.
c) Got the Library, Report Group, Report & T.code transported to Quality Client.
d) Executed the transaction code in QAS which gave me error.
Reason identified:
a) Let say Program name created for the report is AAXGHGYGBL010 in my client 010.
b) Transaction code ZREPORT01 created using SE93 for program AAXGHGYGBL010.
c) Now got the Library, Report Group, Report & T.code transported to Quality Client 050.
d) In client 050 program AAXGHGYGBL010 doesnot exist as AAXGHGYGBL050 has been created for the transported Report.
Thanks & Regards,
Ankur Goel

Create T.Code for Report painter- report (GRR1)

Hi Experts,
I have created report in report painter( T.code - GRR1) using 1vk library, now i want to have a transaction code for my new report.
So, How can i create a T.code for customized report in GRR1.
Thanks
Raj

Dear Raj,
Hope this link will help you.
http://home4sap.com/Blog/2009/08/how-to-create-a-transaction-code-for-report-painter-reports/
Thanks and regards
Praveen.J

GRR3 Deleted Report Painter report

I deleted a Report Painter report in GRR2. It no longer exists in table T008 or assigned to any report group. However, the deleted report still appears in GRR3 under the respective library. How can we remove permanently a deleted report from GRR3?

Okay, good to know. Now I have to figure out how to import an updated version of library, or the whole Report Painter tools. Thank you Navneet for indirectly helping me resolve the problem.
Problem is (indirectly) solved.

Reg:report painter reports adding into sap menu

HI all,
HI all
How to add reports painter reports in sap menu.?
regards
JK Rao

Hi, Janardhan Rao & all other Readers of SAP Net work site,
    Private nodes
           Private nodes are no longer supported in the area menus and are
           not taken into account during migration. As a replacement, the
           favorites are available in the Easy Access.
    Including of own report trees in the menu structure
           In order to include your own area menus generated from the report
           trees into the displayed menu, you can either include the menus
           as enhancements in the SAP Menu or include them into the menu of
           a role. To do this, read the documentation on Transactions SE43
           and PFCG.
    Client dependency of the report trees
           If you have used different report trees for different clients,
           you can carry out the migration several times in the
           corresponding clients. As a result, you receive several
           cross-client area menus.
    Further information
           Also read the Release information BC_46_REPTREEMIG2. You find
           this information in every system under Help -> Release notes ->
           Complete list from Rel. 4.0 -> Release notes as at 4.6A,
           Component BC-FES-SEM, document "Change to area menus and report
           trees".
If you have any query, you may reach me
Dr. Ravi Surya Subrahmanyam, PhD Finance,
SAP FICO Consultant,
Answerthink (India) Limited,
Hyderabad. AP. India
Phone : +91 9848550024
Email : [email protected]

In report painter report, line item level drilldown report requirment

Dear All,
I created one report in GRR1, when I execute the report i am not getting line item wise drilldown option. For example one cost center no of line itemwise posting ( g/ls wise)posting is there. By double clicking on that specific line item we will go that ledger and see the data available in that ledger.In standard reports that option available but my own reports I unable to go drilldown at ledger level cost reports.
Please sugget anyone, where I am doing mistake in report creation level.
Thanks
M Srinivasa reddy
Ph : 9637399076

Thank you,
I attached reports to Library based on that I am able to drilldown line item level of the report.Is it corret or any other way for line item level drilldown option for report painter reports
Thanks
M Srinivasa reddy

Data of the Report Painter report

Dear ALL,
I have the Report Painter report. When I'm executing this report I can save the data into the extract.
Could you tell me where are these data in the system(table?)? I want use these data for SAP script form.
Best regards,
Igor

Please go through the enclosed document. This will give you step-by-step approach for Report painter:
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
Check url
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
Check Report Painter Step-by-Step example under Tools->Report Painter / Report Writer->Report Painter->Creating a Report Painter Report.
Just go through These Links to learn about report Painter.
http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
Please go through the enclosed document. This will give you step-by-step approach for Report painter:
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
Check url
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
Check Report Painter Step-by-Step example under Tools->Report Painter / Report Writer->Report Painter->Creating a Report Painter Report.
Just go through These Links to learn about report Painter.
http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
I think it will give you some hint. I wish I could have authorization to use report painter on my this project so I can help you out practically.
Please see these steps , it`ll help you ...
http://www.thespot4sap.com/Articles/Code_CostCentreReport.asp
regards
vinod

Report Painter Report Performance Issue

hi,
My client facing the problem with Report painter reports , almost all the reports taking much amount of time to execute . we are Using 5.0 version tables FAGLFLEXT and CSSS . i have some doubts report index is the cause for this or any other reasons can any one help me in this regard,
thanks in advance
sasidhar.A

Hi,
just create a proper index and performance will increase. There are some SAP OSS notes who deal with this (for example field "client" should be added if'm not mistaken).
We did the same on profit center tables with huge performance increases
grtz
dries

Report Painter Request - Cost Center and WBS Element

Hi Everyone,
Currently, my company settles all project related expenses through to a cost center by way of an internal settlement cost element (category 21). The issue with this is that when the expense gets to the cost center, they lose all visability as to where the expense originated, such as salaries or travel expense (category 1 cost elements). We can't switch the settlements to the originating cost element from wbs to cost center just because of the additional data/volume that will cause. My thought was to create a report painter that can run by cost center but also show the wbs's that settle to that cost center and group the expenses by primary cost element (cat 1). I'm assuming that there is a way to marry a cost center and wbs element by way of the wbs settlement rule but how would that be done for reporting purposes? I've seen it done before by way of a nightly job that created sets based on the combination of cost center and wbs but I'm not sure how that was done. Any advise and examples?
Example:
Cost Center: IT
WBS: A.0017.01.01 (settles to cost center IT)
Postings made:
1. CC IT and CE 552000 "salaries"..............................$20,000
2. WBS A.0017.01.01 and CE 552000 "salaries"........... $5,000
3. Settlement of WBS to CC (expenses flow through to CC IT by way of CE 985000)
I want to run CC IT and see that the account 552000 really shows $25,000 and can be broken down by cost object (CC and WBS by the amounts above)
Thanks,
Pete

Hi Peter,
I had a similar requirement and used report painter report group 1SHK-002 (in library 1VK).
I took a copy of the standard and ameneded it slightly, I switched the explode so it occured on the cost center not cost element.
The report runs so that direct costs on the cost center are shown at primary cost level. And values settled to the cost center are shown on the partner object. In your case i guess WBS Elements (Partner ObjType WBS).
Now in my case I didnt need cost element breakdown on partner level, just on cost center so effectively I have(sorry for text alignment but I hope you get the idea):
GL1   ............. 100
GL2   ............. 250
+ Cost center1 total ....350
GL3 .............   50
GL4 ............. 100
+ Cost center2 total.... 150
Primary Cost Total ..... 500
X-YZ-1.200 .............   50
X-YZ-1.400 ............. 100
+ WBS total ............. 150
IO 1............. 100
IO 2 ............. 100
+IO total ............. 200
Partner Total............. 350
Overall total ............. 850.
Its not exactly like your requirement but it might be a good report for you to work with to get what you need.
Elaine

Problem in Exporting a Report Group having a Report Painter Report.

I am having a problem in exporting a Report group having a Report Painter report.When I am trying to export the Report Group using transaction GR57 with all dependent objects,it is displaying:
       group 0102CPDNUEA-CCROSI not transported.
       Transport groups separately if necessary.
There are 6 such groups which are not transported.Can anybody help me in this regards.Can anybody help me in exporting these Groups.Specifically in Report painter reports what do these Groups signify and how can we see them.Please help me....

hi,
I am able to export my report groups with dependent objects successfully.
I dont know why you are getting error message. Just keep break point at ***** and execute it for single group and find out why it is giving error.
IF SY-BATCH = 'X' OR NO_LIST = 'X'. "direct or batch
    SET PF-STATUS 'LIST'.
*****PERFORM TRANSPORT_OBJS USING 'X'. "transport all jobs
    IF FILE_EXP <> 'X'.
      READ TABLE WT_E071 INDEX 1.
      IF SY-SUBRC = 0.
        LEAVE.
      ENDIF.
    ENDIF.
ELSE.                                "online
    SET PF-STATUS 'MENU'.
   PERFORM WRITE_TRANSP_OBJS.
ENDIF.
regards,
ram

Implicit enhancement for report painter reports(For GRR3 and CJE3)

Similar Messages

Maybe you are looking for