Import a class cannot take effect until the restart of wls6.1

Hi all,
I am using Weblogic6.1,I knew that JSP,Servlet,EJB can be auto depolyed
without restart weblogic,but when I
import a class written by myself in JSP or Servlet£¬the modification of this
class cannot take effect until
the restart of weblogic server¡£Why? How can I solve it£¿
thanks in advance!

Check that your classpath is not set up to this class when you start the
          server and check the ProductionDeploymentMode to false in the starting
          parameters!
          Hope it helps.
          Pat
          "jxc" <[email protected]> wrote in message
          news:3bef34c3$[email protected]..
          > Hi all,
          > I am using Weblogic6.1,I knew that JSP,Servlet,EJB can be auto
          depolyed
          > without restart weblogic,but when I
          > import a class written by myself in JSP or Servlet£¬the modification of
          this
          > class cannot take effect until
          > the restart of weblogic server¡£Why? How can I solve it£¿
          >
          > thanks in advance!
          >
          >
          >
          >
          >

Similar Messages

Import a class cannot take effect until the restart of wls6.1,why?

Hi all,
          I am using Weblogic6.1,I knew that JSP,Servlet,EJB can be auto depolyed
          without restart weblogic,but when I
          import a class written by myself in JSP or Servlet£¬the modification of this
          class cannot take effect until
          the restart of weblogic server¡£Why? How can I solve it£¿
          thanks in advance!


Check that your classpath is not set up to this class when you start the
          server and check the ProductionDeploymentMode to false in the starting
          parameters!
          Hope it helps.
          Pat
          "jxc" <[email protected]> wrote in message
          news:3bef34c3$[email protected]..
          > Hi all,
          > I am using Weblogic6.1,I knew that JSP,Servlet,EJB can be auto
          depolyed
          > without restart weblogic,but when I
          > import a class written by myself in JSP or Servlet£¬the modification of
          this
          > class cannot take effect until
          > the restart of weblogic server¡£Why? How can I solve it£¿
          >
          > thanks in advance!
          >
          >
          >
          >
          >

Get error message "this "**" file cannot be attached until the files already attached are finished uploading" even when attaching 1 file

I attached multiples .pdf files to an email. Tried to attach the next file before the previous 1 finished attaching. Got error message "this "**" file cannot be attached until the files already attached are finished uploading". Was never able to attach that 1 file to the email that I received the error message for; was able to attach subsequent files to that same email & send it. Now, I often get the same error message, even if I only attach 1 file & esp. when attaching .ai or .jpeg files. What can I do to fix this problem?

It looks like nobody has an answer for this despite of the 80 something views!
And here i thought Adobe admin would be monitoring the forum, but surprisingly, they don't even have the answer for this!!!

How to add swap in solaris 11 and still will take effect even you restart the server

Hi,
I would like to ask on how to add swap file in solaris 11 will still take effect even you restart the server.
swap -l
zfs create -V 2G swappool/swap2
swap -a /dev/zvol/dsk/rpool/swap2
Regards,
Andrew

Hi Andrew,
After completing the steps above, you will need to add an entry for the new swap volume to the /etc/vfstab as described in this doc if you want the swap volume to be used when the system is rebooted:
Adjusting the Sizes of Your ZFS Swap and Dump Devices - Managing ZFS File Systems in Oracle® Solaris 11.2
Thanks, Cindy

Personlization a message choice dont take effect in the search

EBSR12.1.1
iRecruitment Employee Candidate --> home --> jobs
in the search region:my customer dont want the Job Category show width message choice style, it want like the DatePosted2 style.
but i can't find the difference between Job Category field and DatePosted2 ,so i personlization a new message chioce and the attributes as follows:
Picklist Display Attribute:Meaning
Picklist Value Attribute:LookupCode
Picklist View Definition:oracle.apps.irc.picklist.server.IrcProfessionalAreaVO
Selective Search Criteria:true
Prompt: Job Category
View Attribute:ProfessionalArea
View Instance:IrcCandidateSearchCriteriaVO
the new field appear and the lov is OK,but i find it dont take effect in the search result.

Hi ,
create field in search results table also
and map with the message choice which u created for searching .
Thanks
Raju

I want to deauthorise a computer from my account that has had all of its settings wiped already. I go to deauthorise but I am being told I have already deaithorised 5 devices this last 12 months so cannot do again until the 23rd June.

I want to deauthorise a computer from my account that has had all of its settings wiped already. I go to deauthorise but I am being told I have already deaithorised 5 devices this last 12 months so cannot do again until the 23rd June. His is very frustrating as I have just bought a new laptop and I can't use any of my music on it and my old laptop is dead but I can't deauthorise it. Any tips would be great. Have rung apple and they told me I had to wait. Doesn't seem fir when I only have 2 other devices working at the moment.

I don;t know which part of Apple that you rang, but have you tried contacting iTunes Support and asking if they can deauthorise them for you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

My reviews don't take effect in the iTunes store.

My issue is with leaving reviews. Mine don't seem to take effect in the iTunes store.
This is the most explicit example I got : When I try to edit a review that I know I posted, I have literally nothing, instead of my previous review. It's like I never reviewed the article. It's like this for every article: apps, music, movies or TV Shows ...
Of course I don't find my review if I search for it manually.
Sincerely.

iTunes store support is taking care of the problem, thank you.

Changes dont take effect in the view

Hi,
I am modifying the UI-Table which is editable.
What has to be done to show the current new content of the table on the view.
There is a calculation and the result will be inserted into the cost column.
Cleary how can I see that the changes take effect
I cant see the value in the view after modify command
data wa_kt type ZCBD_PURCHITEM.
Data: l_node type ref to if_wd_context_node.
l_node = wd_context->get_child_node( 'ZKAUF' ).
*l_node->get_static_attributes_table( importing table = lt_table ) .
l_node->get_static_attributes_table( importing table = WD_COMP_CONTROLLER->GT_KAUF_TAB ) .
LOOP AT WD_COMP_CONTROLLER->GT_KAUF_TAB INTO wa_kt.
wa_kt-COST = wa_kt-EKPREIS * wa_kt-MENGE.
modify WD_COMP_CONTROLLER->GT_KAUF_TAB from wa_kt transporting COST.
ENDLOOP.
regards
ertas

Hi,
Table binding........is the corret solution to have the new resutls to be shown....what it does is.Binding stores the latest information to the node.......
Check the tbale events......if there is ONENTER event you can write the same code ...for callucuations...bind the table again...........One thing to remember...this will only trigger when teh USER presses the ENTER key.....but on every ENTER event this code gets triggered..better keep a button for calculation and perform the code in this.......Sometimes the users are lazy to press ENTER everytime...
Regards,
Lekha.

Due to the online classes I take, I need the old 6.0.2 version- where can I get this? and once i have it how can I stop Firefox from updating its self to the useless 7.0 version??????????

i take online classes that are not compatiable with the 7.0 new version- we were told to download the old version 6.0.2 to continue our classes - however , every time i do it pdates its self and now the link to the 6.0.2 version they gave us is corrupt! i need this asap thanks

Download Firefox 6.0.2 from the link given below..
ftp://ftp.mozilla.org/pub/firefox/releases/6.0.2/
edit: replaced random unofficial download link.

How to import a class from a package at the same level

Hello friends,
i have a class as Plaf.java
as
package org.vaibhav.swing.plaf;
import java.awt.*;
import javax.swing.*;
public class Plaf {
other code
}as you see, this is in org.vaibhav.swing.plaf package.
I have one more class as
package org.vaibhav.swing.frames;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class StartFrame extends JFrame implements ActionListener {
other code
}and this class is in package org.vaibhav.swing.frames
Please hlp me how to use the class Plaf in StartFrame.java. Rather what import statement should i use in StartFrame.java.
please help.
thank you
Message was edited by:
vaibhavpingle

but it then gives me this error
StartFrame.java:11: package org.vaibhav.swing.plaf
does not exist
import org.vaibhav.swing.plaf.*;
Have you first compiled Plaf.java and saved it in this directory strucuture
/org/vaibhav/swing/plaf/
And also have you set your classpath to the parent directory of org folder.
Message was edited by:
qUesT_foR_knOwLeDge

When I plug in my hdmi lightening connector I get an error message that states the firmware has to download and the hardware cannot be used until the download is complete. How do I fix this problem?

When I plug my hdmi lightening converter into my iphone5 I get an error message that states " downloading accessory firmware. Your accessory will not function until download completes. How can I fix this?

Don't know what changed today but it downloaded and installed on the shuffle. So far so good.

Cannot hear effects untill after I've recorded them

Hello,
I'm using GarageBand3 and a guitar plugged into an M-Audio interface, then the output is into an amp.
However, when I play the guitar as a real instrument in GarageBand, if I have any effects on I can't hear them through the amp (I can hear just the normal guitar) but if I record something and play it back it DOES have the effect on it (I play it back through the amp and this works fine).
I've also tried it using headphones plugged into both the audio interface and my macbook itself.
Does anyone know how I can make it so that I can hear the effects as I play them?
Thanks!
Andrew
Macbook Mac OS X (10.4.9)

You have to turn monitoring on in the track info window. It allows you to monitor wet signal (the sound being recorded with FX). You are now monitoring the dry signal (the sound before being sent to garageband).
If your using the Fast Track after turning monitoring you can then adjust the signal wet or dry with the input playback volume control.

IP Restrictions not taking effect until the Azure Website is manually restarted

Hi,
We are trying to limit IPs that connect to an Azure website using "system.webServer/security/ipSecurity". It appears that this restriction only works after the Azure website is manually restarted.
Our web.config file looks like this:
<system.webServer>
<security>
<ipSecurity allowUnlisted="false" denyAction="NotFound">
<clear />
<add allowed="true" ipAddress="xxxx.xxxx.xxxx.xxxx" />
</ipSecurity>
</security>
</system.webServer>
Has anyone experienced the same issue? If we don't restart the site, any IPs can access our site. Is there a way to enable IP whitelisting without having to restart the Azure website?
Thank you,
Jonas

Well yes, you have to restart the website in order for your changes to reflect in the site.
And what is it you're trying to do? Put all the allowed ip addresses and restart it once and you're good to go. However if you need to add new ip addresses daily, then that can be an issue.

Apple TV cannot sign in until the network time is set?

error message. How do I correct it

It is not properly connected to the network
Make sure location is set correctly
DNS should be on auto (settings - general - network)
If on wifi try ethernet
Make le sure rputer has port 123 open (refer to manual if unsure)

Imported tunes dont appear in itunes until i restart.

often , when i import tunes it goes through the motions and brings up the little box about processing each mp3.
but the mp3's are no where to be found until i quit and restart.
its quite basic but seems to be getting worse.
i have about 9000 tunes in my library, and the tunes i'm importing have no protection and are infact copied from my other itunes library folder on another machine.

That is the normal behaviour. iTunes must be running for you to be able to access the media stored there with the Apple TV.

Import a class cannot take effect until the restart of wls6.1

Similar Messages

Maybe you are looking for