Import a single view from a full export

Good Morning
How can I extract a single view from a export file?
I can restore a single table no problem
or the whole export file, but i just need one
view out of it
Thanks
David

Hi David & Reza,
There is a way where you can extract a single view from the export file.
01. Do the import process with show=y, that will show all the DDL syntaxes including views.
02 Spool or redirect the output to a file.
03.Get the view syntax and recreate it.
Cheers,
Kamalesh JK

Similar Messages

How to restore a single table from a DP Export from a different schema?

Environment:
Oracle 11.2.0.3 EE on Solaris
I was looking at the documentation on DP Import trying to find the correct syntax to import a single table from a DP Export of a different schema.
So, I want to load table USER1.TABLE1 into USER2.TABLE1 from a DP Export.
Looking at the REMAP_TABLE options:
REMAP_TABLE=[schema.]old_tablename[.partition]:new_tablename
OR
REMAP_TABLE=[schema.]old_tablename[:partition]:new_tablenameI can't see where to specify the target schema name. The examples had the new table name residing in the same schema with just a new name.
I looked at the REMAP_SCHEMA but the docs say that will import the entire schema into the new schema and I only want one (1) table.
Any suggestions are most welcome!
-gary

I thought I tried that combination and it seemed to me that the REMAP_SCHEMA somehow over-rode the TABLES= parameter >and started loading all the objects.If it does fail (and it should not) then please post the details here and I will try to see what is happening.
Let me get back into the sandbox and try it again. I admit I was in a bit of a hurry when I did it the first time.We are all in a hurry, no worries. If it fails, please post the details and the log file.
Does it make any sense that one parameter would override another?No, this should never happen. We have tons of checks to make sure the job can't have multiple meanings. For example, you can't say
full=y schemas=foo --- Which do you want, a full export or a list of schema exports, etc.
Your suggestion was the first thing I thought would work.This should work. If not, please post the log file with the command and the results.
Dean
Thanks again for the help and stay tuned for my new attempt.
-gary

Creating multiple graphs dashboard in Crystal XI using a single View from MS SQL Server 2005

How to create multiple graphs dashboard in Crystal XI using a single View from MS SQL Server 2005?
I need to use Crystal XI and create a dashboard which shows some sales data and stuff, multiple graphs on a single screen.
My tech team says they can display one graph per page but not 4 graphs on the same page as it uses a common view from SQL Server 2005.
How to manage this? Can we call in multiple views / graphs in the same page? Say 4 graphs on the same page?
We use ASP or .NET for calling crystal reports into the App.
Regards,
Akshay.
INDIA

Have you tried creating multiple sections, putting each graph in a separate section and then underlaying the sections so they appear next to each other?

Import a single Package from dmp

Hi,
Is this posible the we can import an single package from a dmp file ?
If yes please give the syntex.
Thanks
Nitesh

Oracle Version.
SQL> host exp hr/hr
SQL> host imp hr/hr show=y
"end;"
"CREATE PACKAGE emp_stuff AS"
" CURSOR c1 RETURN employees%ROWTYPE; -- declare cursor spec"
"END emp_stuff;"
"CREATE PACKAGE BODY emp_stuff AS"
" CURSOR c1 RETURN employees%ROWTYPE IS"
" SELECT * FROM employees WHERE salary > 2500; -- define cursor body"
"END emp_stuff;"

Restore Designer from a FULL EXPORT

Hi to all ....
I have a FULL EXPORT of a database (9.2) where there was my Designer Repository my server crash and now I need to restore it in a new Oracle instance
I try to import the repos_manager user and the user DES that we use for designer
But not work ......
Any Idea Help ???
Thank's in advance

The user DES (I assume the schema owner) has to be created with the correct privileges (in my script the user is D2K and you may also have to change the tablespaces):
create user D2K
default tablespace D2K_RAPID_GROW_D
temporary tablespace TEMP
profile DEFAULT
quota unlimited on d2k_constant_grow_d
quota unlimited on d2k_constant_grow_i
quota unlimited on d2k_dependency_d
quota unlimited on d2k_dependency_i
quota unlimited on d2k_diagram_d
quota unlimited on d2k_diagram_i
quota unlimited on d2k_lob_d
quota unlimited on d2k_rapid_grow_d
quota unlimited on d2k_rapid_grow_i
quota unlimited on d2k_system_meta_d
quota unlimited on d2k_system_meta_i
quota unlimited on d2k_temporary_d
quota unlimited on d2k_temporary_i
quota unlimited on d2k_version_d
quota unlimited on d2k_version_i;
-- Grant/Revoke role privileges
grant ckr_d2k to D2K with admin option;
grant ck_oracle_repos_owner to D2K;
grant connect to D2K;
grant dba to D2K;
grant resource to D2K;
-- Grant/Revoke system privileges
grant create any synonym to D2K;
grant drop any synonym to D2K;
grant unlimited tablespace to D2K;

Possiblity to import any particular table from the full dmp file

Hi,
I am using Oracle 10G database.
I a have dmp file.
I need to import only a particular from that dmp file.
Is there any possiblity to import a particular table from the whole dump.
Thanks and Regards,
Ansaf.

Ansaf wrote:
Hi,
I am using Oracle 10G database.
I a have dmp file.
I need to import only a particular from that dmp file.
Is there any possiblity to import a particular table from the whole dump.
Thanks and Regards,
Ansaf.
You can specify like below example
impdp hr TABLES=employees, xxx, xxxCheers

Import a single picture from camera

I am trying to import just one picture from my camera (Canon EOS Rebel), but when I hook my camera up it only gives me the option of importing all the photos. Can't I choose which ones to import?

There are 2 workarounds to accomplish this:
1. Launch Image Capture, found in your Applications folder. Choose "Download Some" and you can look in your camera, preview and select only the file(s) you want to upload. Save them in a folder on your Desktop (NOT inside the iPhoto Library folder), then import into iPhoto and delete the Desktop copy.
2. Instead of uploading via the camera, use a card reader. It will mount on the Desktop as an external drive. This allows you to use iPhoto's File > Import to Library command, then navigate to your memory card. You can preview the files and choose only the ones you wish to upload, and they will be imported directly into your iPhoto library. Many cameras mount on the Desktop and can be used this way, but since Canon does not design their cameras to do this, the card reader is needed. I actually prefer this method of uploading, since I don't have to worry about the camera's battery power while importing with the card reader.
Regards.
P.S. iPhoto 7 has this capability built in.

Import files into iDVD from iMovie OR export files from iMovie to iDVD?

I've been told it is better to import iMovie projects into iDVD (within iDVD) rather than exporting from iMovie to iDVD within iMovie. I was told that iDVD does a better job of rendering things than iMovie. Is this true because this is not the instructions given in the iMovie tutorial.

Not sure what advice you have been given and how you have interpreted it.
You are of course referring to im6 here since you can't drag projects from im08 to iDVD.
I don't make many DVD's anymore and may well be wrong here but I'm not aware that dragging an im6 project to iDVD is any different than using share/iDVD and I'm wondering if the advice relates to exporting from im6 and then importing the exported movie into iDVD which is indeed a different workflow.

Importing single row from an exported dump of many tables

Hi all,
I have a requirement to import a single row from a exported dump which has collection of tables in it.
i have used export of a single row and import of single row(from single row export dump), now i need to import a single row from a dump containing collection of tables...
kindly help me out with this.

971424 wrote:
Hi all,
I have a requirement to import a single row from a exported dump which has collection of tables in it.
i have used export of a single row and import of single row(from single row export dump), now i need to import a single row from a dump containing collection of tables...
kindly help me out with this.post command line that produced the dump file.
How do I ask a question on the forums?
SQL and PL/SQL FAQ

Full export dump to import schema

Hi,
I have an exp dump(datapump) of database, the command use for this:
+/******* directory=expdump DUMPFILE=HYRT.dmp logfile=HYRT_exp.log FULL=y+*
Now, I have imported the dump with the below command:
T24OWNER/******** directory=dor dumpfile=HYRT.dmp logfile=DGFRdmp.impdp.log REMAP_SCHEMA=USER:OWNER REMAP_TABLESPACE=DATAL:BDATA,INDEL:INDEX*
I have got several errors.
Is this errors occured because of the import command where I used imported a schema alone?
If I use full =y parfile in the import command, will these errors can be avoided.
Thanks in advance,
nonuday
Edited by: Nonuday on Apr 29, 2012 10:56 PM
Edited by: Nonuday on Apr 29, 2012 10:57 PM

Hi Vishwanath,
The import got completed.
I have got sum of 16164 errors and I have posted each of its kind below.
1
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
9
bf d6
0cfc6e4Sm6mfaMYwsbW2JygBepcwg/BKmJ4VZy/pO06UXsVUMejsissTcGWYR4qeK4TPqfDK
q7UPH+SmKP6nW9zmxMZnuK1VDzM0Iv9O4E4SvvsnHWn+EPF9hR+oBFe3fEro6RQ5R5Ejd1nr
e+fAK010dExf76gg/c6ZB3YxGPHDOqkGI4lV6HNsd57gKLwTd0bxan5UwJriIpt7Vjc=
Processing object type DATABASE_EXPORT/SCHEMA/FUNCTION/FUNCTION
ORA-31685: Object type FUNCTION:"SYSTEM"."WM$_CHECK_INSTALL" failed due to insufficient privileges. Failing sql is:
CREATE FUNCTION "SYSTEM"."WM$_CHECK_INSTALL" return boolean is begin return false ; end;
Processing object type DATABASE_EXPORT/SCHEMA/PROCEDURE/PROCEDURE
ORA-31685: Object type PROCEDURE:"OUTLN"."ORA$GRANT_SYS_SELECT" failed due to insufficient privileges. Failing sql is:
CREATE PROCEDURE "OUTLN"."ORA$GRANT_SYS_SELECT" as
begin
EXECUTE IMMEDIATE 'GRANT SELECT ON OUTLN.OL$ TO SELECT_CATALOG_ROLE';
EXECUTE IMMEDIATE 'GRANT SELECT ON OUTLN.OL$HINTS TO SELECT_CATALOG_ROLE';
EXECUTE IMMEDIATE 'GRANT SELECT ON OUTLN.OL$NODES TO SELECT_CATALOG_ROLE';
end;
ORA-31685: Object type PROCEDURE:"SYSTEM"."ORA$_SYS_REP_AUTH" failed due to insufficient privileges. Failing sql is:
CREATE PROCEDURE "SYSTEM"."ORA$_SYS_REP_AUTH" as
begin
EXECUTE IMMEDIATE 'GRANT SELECT ON SYSTEM.repcat$_repschema TO SYS ' ||
'WITH GRANT OPTION';
EXECUTE IMMEDIATE 'GRANT SELECT ON SYSTEM.repcat$_repprop TO SYS ' ||
'WITH GRANT OPTION';
EXECUTE IMMEDIATE 'GRANT SELECT ON SYSTEM.def$_aqcall TO SYS ' ||
'WITH GRANT OPTION';
EXECUTE
Processing object type DATABASE_EXPORT/SCHEMA/FUNCTION/ALTER_FUNCTION
ORA-31685: Object type ALTER_FUNCTION:"SYSTEM"."WM$_CHECK_INSTALL" failed due to insufficient privileges. Failing sql is:
ALTER FUNCTION "SYSTEM"."WM$_CHECK_INSTALL" COMPILE PLSQL_OPTIMIZE_LEVEL= 2 PLSQL_CODE_TYPE= INTERPRETED PLSQL_DEBUG= FALSE REUSE SETTINGS TIMESTAMP '2010-11-01 16:05:09'
Processing object type DATABASE_EXPORT/SCHEMA/PROCEDURE/ALTER_PROCEDURE
ORA-31685: Object type ALTER_PROCEDURE:"OUTLN"."ORA$GRANT_SYS_SELECT" failed due to insufficient privileges. Failing sql is:
ALTER PROCEDURE "OUTLN"."ORA$GRANT_SYS_SELECT" COMPILE PLSQL_OPTIMIZE_LEVEL= 2 PLSQL_CODE_TYPE= INTERPRETED PLSQL_DEBUG= FALSE REUSE SETTINGS TIMESTAMP '2010-11-01 16:05:09'
ORA-31685: Object type ALTER_PROCEDURE:"SYSTEM"."ORA$_SYS_REP_AUTH" failed due to insufficient privileges. Failing sql is:
ALTER PROCEDURE "SYSTEM"."ORA$_SYS_REP_AUTH" COMPILE PLSQL_OPTIMIZE_LEVEL= 2 PLSQL_CODE_TYPE= INTERPRETED PLSQL_DEBUG= FALSE REUSE SETTINGS TIMESTAMP '2010-11-01 16:05:09'
Processing object type DATABASE_EXPORT/SCHEMA/VIEW/VIEW
ORA-31685: Object type VIEW:"SYSTEM"."MVIEW_WORKLOAD" failed due to insufficient privileges. Failing sql is:
CREATE FORCE VIEW "SYSTEM"."MVIEW_WORKLOAD" ("WORKLOADID", "IMPORT_TIME", "QUERYID", "APPLICATION", "CARDINALITY", "RESULTSIZE", "LASTUSE", "FREQUENCY", "OWNER", "PRIORITY", "QUERY", "RESPONSETIME") AS select
a.collectionid# as workloadid,
a.collecttime as import_time,
a.queryid# as queryid,
a.application,
a.cardinality,
a.resultsize,
a.qdate as lastuse,
a.frequency,
a.uname as o
Processing object type DATABASE_EXPORT/SCHEMA/VIEW/GRANT/OWNER_GRANT/OBJECT_GRANT
ORA-39112: Dependent object type OBJECT_GRANT:"SYSTEM" skipped, base object type VIEW:"SYSTEM"."MVIEW_WORKLOAD" creation failed
Processing object type DATABASE_EXPORT/SCHEMA/POST_SCHEMA/PROCACT_SCHEMA
Processing object type DATABASE_EXPORT/SCHEMA/PASSWORD_HISTORY
ORA-39083: Object type PASSWORD_HISTORY failed to create with error:
ORA-06550: line 1, column 33:
PLS-00201: identifier 'SYS.DBMS_PSWMG_IMPORT' must be declared
ORA-06550: line 1, column 10:
PL/SQL: Item ignored
These are the errors in the log..
I have done import from many client export dump before but they are schema level export only.
This one is full database export where I have imported only the schema from the full exp dump. Is this the reason why am getting so many errors or anything else can you throw some light.
Thanks in advance.
nonuday
Edited by: Nonuday on Apr 29, 2012 11:03 PM

Importing single bin from another project

Do any of the experts (or former Avid users) know how to import a single bin from another project into the current project - is this possible in CS6? Also is there anything like the dupe detection in Avid? On the subject of Speech to text (analysis) does this improve over time - i.e. is there a learning system such as in Dragon Naturally Speaking that will reduce the gibberish somewhat? Thanks

Hi Mike,
You can only import an entire Premiere Pro project, or a selected sequence, into your current PP project. If you want to import just a single Bin, you can:
Make a copy of the project you want to import, and then, in the Project window, delete all media outside the Bin you you want to keep. Now import that modified project with only 1 Bin.
Put all of your Bin's media on a new sequence, and then import just that sequence into PP. Only the media associated with that sequence will be copied into your master project.
Import your entire PP project and delete all media outside your Bin from within your master project.
No dupe detection as of yet. If you haven't already, please send Adobe a Feature Request here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&promoid=EWQQL. The more people ask this, the better the chances we'll finally get it (I miss it from FCP).
As for Speech to text, I don't use it so I don't know. Hopefully someone else will chime in.
Hope this helps. Cheers!

Restoring a full export

I need to restore a test database from a full export. What is the procedure for this? Do I need to blow away the existing DB and then import? Thank you,
David

When performing the full import beware of the SYS schema. You are supposed to import specific schemas and objects. You should be aware also that when issuing the full=y, if the export was generated at the highest abstraction level (database), then tablespace definitions will be stored there too and import will try to recreate them on the same paths as the original file.
~ Madrid

How to do a full export and exclude user specific tables

Hi all,
Is it possible to export all objects but one (or more) tables with expdp when doing a full export?
This is what I've to in mind: (parfile)
directory=expdp
dumpfile=full.dmp
logfile=full.elog
full=y
exclude=table:"IN('userA.table_A')"
This par-file does not encounter any error messages but it doesn't exclude table_A in schema userA either.
I guess that's because the the term userA is not interpreted as an owner.
It's not a big deal to filter out a table when doing a schema export.
I wonder whether it is at all possible do except a table from a full export. If so, I'd value your suggestions.
Regards,
Louis

Louis,
The exclude parameter in DataPump takes only the object name, not the schema name. So, if you only have one table called 'TableA', then you can just use:
exclude=table:"IN('table_A')"
If you have more than one table called 'table_A', then the exclude will exclude all of them. There is no way to specify user_1.table_a with an exclude parameter.
Dean

Imp Command to import a single table

Dear All:
i want to import a single table from my backup and want to preserve all the existing indexes using IMP command.
UserID : NEW_USER
PWD: qwert1

imp system/password@tstdhk fromuser=syslog touser=newuser tables=logs200712 rows=y file=/u06/import_exp/syslog_logs200712_080217.dmp commit=Y grants=N statistics=NONE ignore=Y log=/u06/import_exp/logs_part_jan.log
Regards
Asif Kabir

IMPORT a VIEW from an export dump file

I'm trying to import a view from an export dump file. In using the Import Utility, do I use the TABLE parameter and give the View name ie: TABLES=view1
null

Only I want to do is import ONE view from an export dmp file that contains hundereds of table, many views and procedures. I do not want to reimport everything from the export file.

Import a single view from a full export

Similar Messages

Maybe you are looking for